! Started logfile: J1638+6234_S_2017_08_12_pus_uvs.log on Fri May 10 15:03:39 2019 obs J1638+6234_S_2017_08_12_pus_uva.fits ! Reading UV FITS file: J1638+6234_S_2017_08_12_pus_uva.fits ! AN table 1: 217 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.915412 visibilities/baseline/integration-bin. ! Found source: J1638+6234 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 594 lines of history. ! ! Reading 35756 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J1638+6234_S_2017_08_12_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 95 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 95 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 95 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 1181 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.957048Jy sigma=0.008294 ! Fit after self-cal, rms=0.923021Jy sigma=0.008002 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.299 mas, bmaj=3.433 mas, bpa=39.28 degrees ! Estimated noise=867.94 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0542242 Jy ! Component: 100 - total flux cleaned = 0.0834258 Jy ! Total flux subtracted in 100 components = 0.0834258 Jy ! Clean residual min=-0.012764 max=0.021396 Jy/beam ! Clean residual mean=-0.000239 rms=0.004534 Jy/beam ! Combined flux in latest and established models = 0.0834259 Jy ! Performing phase self-cal ! Adding 47 model components to the UV plane model. ! The established model now contains 47 components and 0.0834259 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.168055Jy sigma=0.001520 ! Fit after self-cal, rms=0.167607Jy sigma=0.001516 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.999 mas, bmaj=4.318 mas, bpa=34.06 degrees ! Estimated noise=486.306 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0484444 Jy ! Component: 100 - total flux cleaned = 0.07941 Jy ! Component: 150 - total flux cleaned = 0.0992551 Jy ! Component: 200 - total flux cleaned = 0.111978 Jy ! Total flux subtracted in 200 components = 0.111978 Jy ! Clean residual min=-0.024752 max=0.036123 Jy/beam ! Clean residual mean=-0.000331 rms=0.008580 Jy/beam ! Combined flux in latest and established models = 0.195404 Jy ! Performing phase self-cal ! Adding 30 model components to the UV plane model. ! The established model now contains 64 components and 0.195404 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.152475Jy sigma=0.001374 ! Fit after self-cal, rms=0.151266Jy sigma=0.001365 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 3.52 FD 0.99 HN 1.91 KP 0.84 ! LA 0.68 MK 1.26 NL 3.29 OV 2.34 ! PT 0.44 SC 1.04 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 3.48 FD 1.04 HN 1.69 KP 0.84 ! LA 0.65 MK 1.18 NL 3.62 OV 2.40 ! PT 0.43 SC 1.27 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 3.18 FD 1.15 HN 1.51 KP 0.90 ! LA 0.67 MK 1.20 NL 3.33 OV 2.60 ! PT 0.42 SC 1.25 ! ! ! Correcting IF 4. ! A total of 9 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.31 HN 1.37 KP 1.00* ! LA 0.64 MK 0.73 NL 1.00* OV 1.00* ! PT 0.44 SC 1.00* ! ! ! Fit before self-cal, rms=0.151266Jy sigma=0.001365 ! Fit after self-cal, rms=0.386604Jy sigma=0.001047 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=4.278 mas, bmaj=4.514 mas, bpa=52.45 degrees ! Estimated noise=618.274 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00983528 Jy ! Component: 100 - total flux cleaned = 0.0113947 Jy ! Component: 150 - total flux cleaned = 0.0118773 Jy ! Component: 200 - total flux cleaned = 0.0123119 Jy ! Total flux subtracted in 200 components = 0.0123119 Jy ! Clean residual min=-0.019434 max=0.025741 Jy/beam ! Clean residual mean=0.000453 rms=0.006932 Jy/beam ! Combined flux in latest and established models = 0.207716 Jy ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 73 components and 0.207716 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.384563Jy sigma=0.001054 ! Fit after self-cal, rms=0.396124Jy sigma=0.001017 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.396124Jy sigma=0.001017 ! Fit after self-cal, rms=0.701922Jy sigma=0.000906 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=4.223 mas, bmaj=4.64 mas, bpa=41.03 degrees ! Estimated noise=635.011 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00395723 Jy ! Component: 100 - total flux cleaned = 0.00431382 Jy ! Component: 150 - total flux cleaned = 0.00442734 Jy ! Component: 200 - total flux cleaned = 0.00456655 Jy ! Total flux subtracted in 200 components = 0.00456655 Jy ! Clean residual min=-0.014970 max=0.016583 Jy/beam ! Clean residual mean=0.000052 rms=0.004624 Jy/beam ! Combined flux in latest and established models = 0.212282 Jy selfcal ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 74 components and 0.212282 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.701695Jy sigma=0.000908 ! Fit after self-cal, rms=0.703984Jy sigma=0.000902 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000839629 Jy ! Component: 100 - total flux cleaned = -0.000959867 Jy ! Component: 150 - total flux cleaned = -0.00095999 Jy ! Component: 200 - total flux cleaned = -0.000960576 Jy ! Total flux subtracted in 200 components = -0.000960576 Jy ! Clean residual min=-0.014663 max=0.015569 Jy/beam ! Clean residual mean=0.000048 rms=0.004475 Jy/beam ! Combined flux in latest and established models = 0.211322 Jy ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 77 components and 0.211322 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.703967Jy sigma=0.000901 ! Fit after self-cal, rms=0.703983Jy sigma=0.000901 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.703983Jy sigma=0.000901 ! Fit after self-cal, rms=0.892543Jy sigma=0.000898 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=4.254 mas, bmaj=4.764 mas, bpa=35.72 degrees ! Estimated noise=664.566 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0028739 Jy ! Component: 100 - total flux cleaned = 0.00307767 Jy ! Component: 150 - total flux cleaned = 0.00324324 Jy ! Component: 200 - total flux cleaned = 0.00333586 Jy ! Total flux subtracted in 200 components = 0.00333586 Jy ! Clean residual min=-0.014874 max=0.015621 Jy/beam ! Clean residual mean=0.000047 rms=0.004535 Jy/beam ! Combined flux in latest and established models = 0.214657 Jy selfcal ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 77 components and 0.214657 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.892424Jy sigma=0.000898 ! Fit after self-cal, rms=0.892909Jy sigma=0.000897 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000196835 Jy ! Component: 100 - total flux cleaned = -0.000196554 Jy ! Component: 150 - total flux cleaned = -0.000235335 Jy ! Component: 200 - total flux cleaned = -0.000235644 Jy ! Total flux subtracted in 200 components = -0.000235644 Jy ! Clean residual min=-0.014620 max=0.015770 Jy/beam ! Clean residual mean=0.000046 rms=0.004540 Jy/beam ! Combined flux in latest and established models = 0.214422 Jy ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 78 components and 0.214422 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.892900Jy sigma=0.000897 ! Fit after self-cal, rms=0.892906Jy sigma=0.000897 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.892906Jy sigma=0.000897 ! Fit after self-cal, rms=1.288096Jy sigma=0.000896 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=9.096 mas, bmaj=11.65 mas, bpa=78.33 degrees ! Estimated noise=736.295 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0031716 Jy ! Component: 100 - total flux cleaned = 0.00397595 Jy ! Component: 150 - total flux cleaned = 0.00401849 Jy ! Component: 200 - total flux cleaned = 0.0040366 Jy ! Total flux subtracted in 200 components = 0.0040366 Jy ! Clean residual min=-0.023655 max=0.027157 Jy/beam ! Clean residual mean=0.000092 rms=0.008163 Jy/beam ! Combined flux in latest and established models = 0.218458 Jy selfcal ! Performing phase self-cal ! Adding 7 model components to the UV plane model. ! The established model now contains 79 components and 0.218458 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=1.288014Jy sigma=0.000897 ! Fit after self-cal, rms=1.288423Jy sigma=0.000896 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -8.76573e-05 Jy ! Component: 100 - total flux cleaned = -8.83431e-05 Jy ! Component: 150 - total flux cleaned = -8.79822e-05 Jy ! Component: 200 - total flux cleaned = -8.66756e-05 Jy ! Total flux subtracted in 200 components = -8.66756e-05 Jy ! Clean residual min=-0.023732 max=0.027113 Jy/beam ! Clean residual mean=0.000093 rms=0.008171 Jy/beam ! Combined flux in latest and established models = 0.218372 Jy ! Performing phase self-cal ! Adding 7 model components to the UV plane model. ! The established model now contains 81 components and 0.218372 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=1.288422Jy sigma=0.000896 ! Fit after self-cal, rms=1.288438Jy sigma=0.000896 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=4.303 mas, bmaj=4.847 mas, bpa=32.73 degrees ! Estimated noise=692.965 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 4.303 x 4.847 at 32.73 degrees (North through East) ! Clean map min=-0.014865 max=0.099949 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.386 mas, bmaj=3.849 mas, bpa=30.9 degrees ! Estimated noise=1332.48 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0758321 Jy ! Component: 100 - total flux cleaned = 0.118829 Jy ! Component: 150 - total flux cleaned = 0.148114 Jy ! Component: 200 - total flux cleaned = 0.168185 Jy ! Total flux subtracted in 200 components = 0.168185 Jy ! Clean residual min=-0.011269 max=0.014502 Jy/beam ! Clean residual mean=-0.000110 rms=0.003438 Jy/beam ! Combined flux in latest and established models = 0.168185 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 33 model components to the UV plane model. ! The established model now contains 33 components and 0.168185 Jy ! Inverting map and beam ! Estimated beam: bmin=4.303 mas, bmaj=4.847 mas, bpa=32.73 degrees ! Estimated noise=692.965 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0234241 Jy ! Component: 100 - total flux cleaned = 0.0353795 Jy ! Component: 150 - total flux cleaned = 0.0416248 Jy ! Component: 200 - total flux cleaned = 0.0448941 Jy ! Total flux subtracted in 200 components = 0.0448941 Jy ! Clean residual min=-0.014729 max=0.015970 Jy/beam ! Clean residual mean=0.000021 rms=0.004696 Jy/beam ! Combined flux in latest and established models = 0.213079 Jy ! Adding 38 model components to the UV plane model. ! The established model now contains 62 components and 0.213079 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=9.096 mas, bmaj=11.65 mas, bpa=78.33 degrees ! Estimated noise=736.295 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00329511 Jy ! Component: 100 - total flux cleaned = 0.00428589 Jy ! Component: 150 - total flux cleaned = 0.00431103 Jy ! Component: 200 - total flux cleaned = 0.00433549 Jy ! Total flux subtracted in 200 components = 0.00433549 Jy ! Clean residual min=-0.023793 max=0.026923 Jy/beam ! Clean residual mean=0.000085 rms=0.008175 Jy/beam ! Combined flux in latest and established models = 0.217415 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 2.30005e-05 Jy ! Component: 100 - total flux cleaned = 4.54735e-05 Jy ! Component: 150 - total flux cleaned = 6.75183e-05 Jy ! Component: 200 - total flux cleaned = 8.83688e-05 Jy ! Total flux subtracted in 200 components = 8.83688e-05 Jy ! Clean residual min=-0.023785 max=0.026928 Jy/beam ! Clean residual mean=0.000086 rms=0.008175 Jy/beam ! Combined flux in latest and established models = 0.217503 Jy ! Adding 10 model components to the UV plane model. ! The established model now contains 64 components and 0.217503 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=4.303 mas, bmaj=4.847 mas, bpa=32.73 degrees ! Estimated noise=692.965 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00101345 Jy ! Component: 100 - total flux cleaned = -0.00101508 Jy ! Component: 150 - total flux cleaned = -0.00105617 Jy ! Component: 200 - total flux cleaned = -0.00109076 Jy ! Total flux subtracted in 200 components = -0.00109076 Jy ! Clean residual min=-0.014680 max=0.016339 Jy/beam ! Clean residual mean=0.000039 rms=0.004696 Jy/beam ! Combined flux in latest and established models = 0.216412 Jy selfcal ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 66 components and 0.216412 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=1.288421Jy sigma=0.000896 ! Fit after self-cal, rms=1.288398Jy sigma=0.000896 wmodel J1638+6234_S_2017_08_12_pus_map.mod ! Writing 66 model components to file: J1638+6234_S_2017_08_12_pus_map.mod wobs J1638+6234_S_2017_08_12_pus_uvs.fits ! Writing UV FITS file: J1638+6234_S_2017_08_12_pus_uvs.fits wwins J1638+6234_S_2017_08_12_pus_map.win ! wwins: Wrote 1 windows to J1638+6234_S_2017_08_12_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.0069929 Jy ! Component: 100 - total flux cleaned = 0.0108503 Jy ! Component: 150 - total flux cleaned = 0.0144682 Jy ! Component: 200 - total flux cleaned = 0.0166696 Jy ! Component: 250 - total flux cleaned = 0.0190249 Jy ! Component: 300 - total flux cleaned = 0.0213024 Jy ! Component: 350 - total flux cleaned = 0.0232843 Jy ! Component: 400 - total flux cleaned = 0.0254198 Jy ! Component: 450 - total flux cleaned = 0.0270797 Jy ! Component: 500 - total flux cleaned = 0.0284948 Jy ! Component: 550 - total flux cleaned = 0.0294803 Jy ! Component: 600 - total flux cleaned = 0.0306437 Jy ! Component: 650 - total flux cleaned = 0.0317811 Jy ! Component: 700 - total flux cleaned = 0.0325254 Jy ! Component: 750 - total flux cleaned = 0.033622 Jy ! Component: 800 - total flux cleaned = 0.0341574 Jy ! Component: 850 - total flux cleaned = 0.035041 Jy ! Component: 900 - total flux cleaned = 0.0352141 Jy ! Component: 950 - total flux cleaned = 0.0359027 Jy ! Component: 1000 - total flux cleaned = 0.0370841 Jy ! Component: 1050 - total flux cleaned = 0.037082 Jy ! Component: 1100 - total flux cleaned = 0.0380693 Jy ! Component: 1150 - total flux cleaned = 0.0385571 Jy ! Component: 1200 - total flux cleaned = 0.0395228 Jy ! Component: 1250 - total flux cleaned = 0.0406342 Jy ! Component: 1300 - total flux cleaned = 0.041418 Jy ! Component: 1350 - total flux cleaned = 0.0420399 Jy ! Component: 1400 - total flux cleaned = 0.0429627 Jy ! Component: 1450 - total flux cleaned = 0.0435715 Jy ! Component: 1500 - total flux cleaned = 0.0440222 Jy ! Component: 1550 - total flux cleaned = 0.0449171 Jy ! Component: 1600 - total flux cleaned = 0.0452147 Jy ! Component: 1650 - total flux cleaned = 0.0459448 Jy ! Component: 1700 - total flux cleaned = 0.0463774 Jy ! Component: 1750 - total flux cleaned = 0.0462361 Jy ! Component: 1800 - total flux cleaned = 0.0465213 Jy ! Component: 1850 - total flux cleaned = 0.0475051 Jy ! Component: 1900 - total flux cleaned = 0.0477823 Jy ! Component: 1950 - total flux cleaned = 0.0480585 Jy ! Component: 2000 - total flux cleaned = 0.0488797 Jy ! Component: 2050 - total flux cleaned = 0.048607 Jy ! Component: 2100 - total flux cleaned = 0.0491473 Jy ! Component: 2150 - total flux cleaned = 0.0494144 Jy ! Component: 2200 - total flux cleaned = 0.0498106 Jy ! Component: 2250 - total flux cleaned = 0.0503366 Jy ! Component: 2300 - total flux cleaned = 0.0500741 Jy ! Component: 2350 - total flux cleaned = 0.0508526 Jy ! Component: 2400 - total flux cleaned = 0.051366 Jy ! Component: 2450 - total flux cleaned = 0.0518761 Jy ! Component: 2500 - total flux cleaned = 0.0525101 Jy ! Component: 2550 - total flux cleaned = 0.052636 Jy ! Component: 2600 - total flux cleaned = 0.053261 Jy ! Component: 2650 - total flux cleaned = 0.0537574 Jy ! Component: 2700 - total flux cleaned = 0.0542507 Jy ! Component: 2750 - total flux cleaned = 0.0547409 Jy ! Component: 2800 - total flux cleaned = 0.0551065 Jy ! Component: 2850 - total flux cleaned = 0.0560745 Jy ! Component: 2900 - total flux cleaned = 0.0567952 Jy ! Component: 2950 - total flux cleaned = 0.0573925 Jy ! Component: 3000 - total flux cleaned = 0.0582229 Jy ! Component: 3050 - total flux cleaned = 0.0586945 Jy ! Component: 3100 - total flux cleaned = 0.0591636 Jy ! Component: 3150 - total flux cleaned = 0.059514 Jy ! Component: 3200 - total flux cleaned = 0.0600953 Jy ! Component: 3250 - total flux cleaned = 0.060558 Jy ! Component: 3300 - total flux cleaned = 0.0612483 Jy ! Component: 3350 - total flux cleaned = 0.061706 Jy ! Component: 3400 - total flux cleaned = 0.0625037 Jy ! Component: 3450 - total flux cleaned = 0.0627311 Jy ! Component: 3500 - total flux cleaned = 0.0630698 Jy ! Component: 3550 - total flux cleaned = 0.063633 Jy ! Component: 3600 - total flux cleaned = 0.0640817 Jy ! Component: 3650 - total flux cleaned = 0.0644171 Jy ! Component: 3700 - total flux cleaned = 0.0651965 Jy ! Component: 3750 - total flux cleaned = 0.06553 Jy ! Component: 3800 - total flux cleaned = 0.0659715 Jy ! Component: 3850 - total flux cleaned = 0.0663013 Jy ! Component: 3900 - total flux cleaned = 0.0666311 Jy ! Component: 3950 - total flux cleaned = 0.0671788 Jy ! Component: 4000 - total flux cleaned = 0.0673971 Jy ! Component: 4050 - total flux cleaned = 0.0679412 Jy ! Total flux subtracted in 4096 components = 0.0683749 Jy ! Clean residual min=-0.005880 max=0.006719 Jy/beam ! Clean residual mean=-0.000019 rms=0.002373 Jy/beam ! Combined flux in latest and established models = 0.284787 Jy keep ! Adding 572 model components to the UV plane model. ! The established model now contains 638 components and 0.284787 Jy ![Exited script file: muppet] wmap "J1638+6234_S_2017_08_12_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 4.303 x 4.847 at 32.73 degrees (North through East) ! Clean map min=-0.011925 max=0.10466 Jy/beam ! Writing clean map to FITS file: J1638+6234_S_2017_08_12_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.104663 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.00225595 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -6.46631 6.46631 12.9326 25.8652 51.7305 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0067 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.104 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 4.303 x 4.847 at 32.73 degrees (North through East) ! Clean map min=-0.011925 max=0.10466 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J1638+6234_S_2017_08_12_pus_uvs.log closed on Fri May 10 15:03:44 2019