! Started logfile: J1637-3309_S_2017_07_09_pus_uvs.log on Wed May 8 14:53:16 2019 obs J1637-3309_S_2017_07_09_pus_uva.fits ! Reading UV FITS file: J1637-3309_S_2017_07_09_pus_uva.fits ! AN table 1: 95 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.375673 visibilities/baseline/integration-bin. ! *** This seems a bit low - see "help observe" on the binwid argument. ! Found source: J1637-3309 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 594 lines of history. ! ! Reading 6424 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J1637-3309_S_2017_07_09_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 446 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 446 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 351 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 677 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.855675Jy sigma=0.006088 ! Fit after self-cal, rms=0.816228Jy sigma=0.005819 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=4.224 mas, bmaj=29.61 mas, bpa=6.79 degrees ! Estimated noise=1958.4 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.138359 Jy ! Component: 100 - total flux cleaned = 0.189712 Jy ! Total flux subtracted in 100 components = 0.189712 Jy ! Clean residual min=-0.011483 max=0.023467 Jy/beam ! Clean residual mean=-0.000415 rms=0.004670 Jy/beam ! Combined flux in latest and established models = 0.189711 Jy ! Performing phase self-cal ! Adding 40 model components to the UV plane model. ! The established model now contains 40 components and 0.189711 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.101718Jy sigma=0.000701 ! Fit after self-cal, rms=0.101432Jy sigma=0.000699 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=5.667 mas, bmaj=36.74 mas, bpa=6.332 degrees ! Estimated noise=1558.27 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0309558 Jy ! Component: 100 - total flux cleaned = 0.0437276 Jy ! Component: 150 - total flux cleaned = 0.049655 Jy ! Component: 200 - total flux cleaned = 0.0523598 Jy ! Total flux subtracted in 200 components = 0.0523598 Jy ! Clean residual min=-0.005339 max=0.006999 Jy/beam ! Clean residual mean=-0.000107 rms=0.001607 Jy/beam ! Combined flux in latest and established models = 0.242071 Jy ! Performing phase self-cal ! Adding 97 model components to the UV plane model. ! The established model now contains 135 components and 0.242071 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.093118Jy sigma=0.000635 ! Fit after self-cal, rms=0.093070Jy sigma=0.000635 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! A total of 6 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 0.95 HN 1.00* KP 1.01 ! LA 0.99 MK 1.00* NL 1.00* OV 1.05 ! PT 1.04 SC 0.78 ! ! ! Correcting IF 2. ! A total of 6 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00 HN 1.00* KP 0.96 ! LA 0.95 MK 1.00* NL 1.00* OV 1.09 ! PT 0.98 SC 0.92 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.03 HN 1.00* KP 1.00 ! LA 0.94 MK 1.00* NL 1.25 OV 0.99 ! PT 0.96 SC 0.97 ! ! ! Correcting IF 4. ! A total of 273 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.00* FD 0.00* HN 0.00* KP 0.00* ! LA 0.00* MK 0.00* NL 0.00* OV 0.00* ! PT 0.00* SC 0.00* ! ! ! Fit before self-cal, rms=0.093070Jy sigma=0.000635 ! Fit after self-cal, rms=0.096384Jy sigma=0.000634 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=5.248 mas, bmaj=37.77 mas, bpa=6.694 degrees ! Estimated noise=1611.26 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000372954 Jy ! Component: 100 - total flux cleaned = -0.00048564 Jy ! Component: 150 - total flux cleaned = -0.000486031 Jy ! Component: 200 - total flux cleaned = -0.000533607 Jy ! Total flux subtracted in 200 components = -0.000533607 Jy ! Clean residual min=-0.004720 max=0.004038 Jy/beam ! Clean residual mean=0.000010 rms=0.001152 Jy/beam ! Combined flux in latest and established models = 0.241538 Jy ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 142 components and 0.241538 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.096316Jy sigma=0.000633 ! Fit after self-cal, rms=0.096415Jy sigma=0.000633 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.096415Jy sigma=0.000633 ! Fit after self-cal, rms=0.096326Jy sigma=0.000631 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=5.243 mas, bmaj=37.47 mas, bpa=6.668 degrees ! Estimated noise=1611.5 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000138269 Jy ! Component: 100 - total flux cleaned = 0.000108819 Jy ! Component: 150 - total flux cleaned = 8.3678e-05 Jy ! Component: 200 - total flux cleaned = 0.000108167 Jy ! Total flux subtracted in 200 components = 0.000108167 Jy ! Clean residual min=-0.003335 max=0.003389 Jy/beam ! Clean residual mean=-0.000000 rms=0.000931 Jy/beam ! Combined flux in latest and established models = 0.241646 Jy selfcal ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 149 components and 0.241646 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.096306Jy sigma=0.000631 ! Fit after self-cal, rms=0.096287Jy sigma=0.000631 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -5.57078e-05 Jy ! Component: 100 - total flux cleaned = -8.07287e-05 Jy ! Component: 150 - total flux cleaned = -8.0245e-05 Jy ! Component: 200 - total flux cleaned = -5.72525e-05 Jy ! Total flux subtracted in 200 components = -5.72525e-05 Jy ! Clean residual min=-0.003324 max=0.003401 Jy/beam ! Clean residual mean=0.000000 rms=0.000932 Jy/beam ! Combined flux in latest and established models = 0.241589 Jy ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 157 components and 0.241589 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.096272Jy sigma=0.000631 ! Fit after self-cal, rms=0.096264Jy sigma=0.000631 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.096264Jy sigma=0.000631 ! Fit after self-cal, rms=0.095787Jy sigma=0.000631 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=5.197 mas, bmaj=37.37 mas, bpa=6.69 degrees ! Estimated noise=1605.03 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000333135 Jy ! Component: 100 - total flux cleaned = 0.000308544 Jy ! Component: 150 - total flux cleaned = 0.00028559 Jy ! Component: 200 - total flux cleaned = 0.00026326 Jy ! Total flux subtracted in 200 components = 0.00026326 Jy ! Clean residual min=-0.003258 max=0.003390 Jy/beam ! Clean residual mean=-0.000000 rms=0.000924 Jy/beam ! Combined flux in latest and established models = 0.241852 Jy selfcal ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 160 components and 0.241852 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.095770Jy sigma=0.000631 ! Fit after self-cal, rms=0.095753Jy sigma=0.000631 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -1.81405e-05 Jy ! Component: 100 - total flux cleaned = -1.86132e-05 Jy ! Component: 150 - total flux cleaned = -4.26233e-05 Jy ! Component: 200 - total flux cleaned = -4.17695e-05 Jy ! Total flux subtracted in 200 components = -4.17695e-05 Jy ! Clean residual min=-0.003280 max=0.003410 Jy/beam ! Clean residual mean=0.000000 rms=0.000924 Jy/beam ! Combined flux in latest and established models = 0.24181 Jy ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 164 components and 0.24181 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.095739Jy sigma=0.000631 ! Fit after self-cal, rms=0.095732Jy sigma=0.000631 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.095732Jy sigma=0.000631 ! Fit after self-cal, rms=0.095229Jy sigma=0.000631 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=11.68 mas, bmaj=43.61 mas, bpa=0.6705 degrees ! Estimated noise=1739.93 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000379486 Jy ! Component: 100 - total flux cleaned = 0.000443081 Jy ! Component: 150 - total flux cleaned = 0.000487502 Jy ! Component: 200 - total flux cleaned = 0.000516518 Jy ! Total flux subtracted in 200 components = 0.000516518 Jy ! Clean residual min=-0.002809 max=0.003027 Jy/beam ! Clean residual mean=-0.000000 rms=0.000927 Jy/beam ! Combined flux in latest and established models = 0.242327 Jy selfcal ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 170 components and 0.242327 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.095225Jy sigma=0.000631 ! Fit after self-cal, rms=0.095219Jy sigma=0.000631 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 4.00944e-05 Jy ! Component: 100 - total flux cleaned = 5.43575e-05 Jy ! Component: 150 - total flux cleaned = 6.75607e-05 Jy ! Component: 200 - total flux cleaned = 6.72691e-05 Jy ! Total flux subtracted in 200 components = 6.72691e-05 Jy ! Clean residual min=-0.002767 max=0.003040 Jy/beam ! Clean residual mean=0.000000 rms=0.000922 Jy/beam ! Combined flux in latest and established models = 0.242394 Jy ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 172 components and 0.242394 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.095216Jy sigma=0.000631 ! Fit after self-cal, rms=0.095215Jy sigma=0.000631 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=5.153 mas, bmaj=37.27 mas, bpa=6.714 degrees ! Estimated noise=1598.4 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 5.153 x 37.27 at 6.714 degrees (North through East) ! Clean map min=-0.0031825 max=0.15495 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.954 mas, bmaj=31.29 mas, bpa=7.131 degrees ! Estimated noise=2027.64 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.137933 Jy ! Component: 100 - total flux cleaned = 0.189889 Jy ! Component: 150 - total flux cleaned = 0.214744 Jy ! Component: 200 - total flux cleaned = 0.227881 Jy ! Total flux subtracted in 200 components = 0.227881 Jy ! Clean residual min=-0.007526 max=0.007698 Jy/beam ! Clean residual mean=-0.000133 rms=0.001902 Jy/beam ! Combined flux in latest and established models = 0.227881 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 70 model components to the UV plane model. ! The established model now contains 70 components and 0.227881 Jy ! Inverting map and beam ! Estimated beam: bmin=5.153 mas, bmaj=37.27 mas, bpa=6.714 degrees ! Estimated noise=1598.4 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-6, 4). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00844564 Jy ! Component: 100 - total flux cleaned = 0.0110184 Jy ! Component: 150 - total flux cleaned = 0.0114676 Jy ! Component: 200 - total flux cleaned = 0.0116516 Jy ! Total flux subtracted in 200 components = 0.0116516 Jy ! Clean residual min=-0.003218 max=0.002908 Jy/beam ! Clean residual mean=-0.000009 rms=0.000888 Jy/beam ! Combined flux in latest and established models = 0.239533 Jy ! Adding 40 model components to the UV plane model. ! The established model now contains 110 components and 0.239533 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=11.68 mas, bmaj=43.61 mas, bpa=0.6705 degrees ! Estimated noise=1739.93 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00124949 Jy ! Component: 100 - total flux cleaned = 0.00144515 Jy ! Component: 150 - total flux cleaned = 0.00132957 Jy ! Component: 200 - total flux cleaned = 0.00139934 Jy ! Total flux subtracted in 200 components = 0.00139934 Jy ! Clean residual min=-0.002548 max=0.002573 Jy/beam ! Clean residual mean=-0.000004 rms=0.000774 Jy/beam ! Combined flux in latest and established models = 0.240932 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -3.29247e-05 Jy ! Component: 100 - total flux cleaned = 7.24194e-08 Jy ! Component: 150 - total flux cleaned = 7.45562e-07 Jy ! Component: 200 - total flux cleaned = 1.80446e-06 Jy ! Total flux subtracted in 200 components = 1.80446e-06 Jy ! Clean residual min=-0.002448 max=0.002467 Jy/beam ! Clean residual mean=-0.000005 rms=0.000755 Jy/beam ! Combined flux in latest and established models = 0.240934 Jy ! Adding 32 model components to the UV plane model. ! The established model now contains 140 components and 0.240934 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=5.153 mas, bmaj=37.27 mas, bpa=6.714 degrees ! Estimated noise=1598.4 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000825534 Jy ! Component: 100 - total flux cleaned = -0.00070635 Jy ! Component: 150 - total flux cleaned = -0.000705632 Jy ! Component: 200 - total flux cleaned = -0.000658321 Jy ! Total flux subtracted in 200 components = -0.000658321 Jy ! Clean residual min=-0.002764 max=0.002806 Jy/beam ! Clean residual mean=-0.000005 rms=0.000784 Jy/beam ! Combined flux in latest and established models = 0.240276 Jy selfcal ! Performing phase self-cal ! Adding 33 model components to the UV plane model. ! The established model now contains 171 components and 0.240276 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.095114Jy sigma=0.000630 ! Fit after self-cal, rms=0.095086Jy sigma=0.000630 wmodel J1637-3309_S_2017_07_09_pus_map.mod ! Writing 171 model components to file: J1637-3309_S_2017_07_09_pus_map.mod wobs J1637-3309_S_2017_07_09_pus_uvs.fits ! Writing UV FITS file: J1637-3309_S_2017_07_09_pus_uvs.fits wwins J1637-3309_S_2017_07_09_pus_map.win ! wwins: Wrote 2 windows to J1637-3309_S_2017_07_09_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -4.78301e-05 Jy ! Component: 100 - total flux cleaned = -5.6153e-06 Jy ! Component: 150 - total flux cleaned = -5.08632e-06 Jy ! Component: 200 - total flux cleaned = -8.20349e-05 Jy ! Component: 250 - total flux cleaned = -0.000266613 Jy ! Component: 300 - total flux cleaned = -0.000301311 Jy ! Component: 350 - total flux cleaned = -0.00019831 Jy ! Component: 400 - total flux cleaned = -0.00016476 Jy ! Component: 450 - total flux cleaned = -0.000195796 Jy ! Component: 500 - total flux cleaned = -0.000165397 Jy ! Component: 550 - total flux cleaned = -7.72223e-05 Jy ! Component: 600 - total flux cleaned = -1.97494e-05 Jy ! Component: 650 - total flux cleaned = 6.42515e-05 Jy ! Component: 700 - total flux cleaned = 0.00011892 Jy ! Component: 750 - total flux cleaned = 0.000171981 Jy ! Component: 800 - total flux cleaned = 0.000197809 Jy ! Component: 850 - total flux cleaned = 0.000248717 Jy ! Component: 900 - total flux cleaned = 0.000298072 Jy ! Component: 950 - total flux cleaned = 0.000369881 Jy ! Component: 1000 - total flux cleaned = 0.000463745 Jy ! Component: 1050 - total flux cleaned = 0.000601714 Jy ! Component: 1100 - total flux cleaned = 0.000714352 Jy ! Component: 1150 - total flux cleaned = 0.000891095 Jy ! Component: 1200 - total flux cleaned = 0.00102072 Jy ! Component: 1250 - total flux cleaned = 0.00110588 Jy ! Component: 1300 - total flux cleaned = 0.00114776 Jy ! Component: 1350 - total flux cleaned = 0.00125074 Jy ! Component: 1400 - total flux cleaned = 0.00129081 Jy ! Component: 1450 - total flux cleaned = 0.00133055 Jy ! Component: 1500 - total flux cleaned = 0.00135025 Jy ! Component: 1550 - total flux cleaned = 0.00138907 Jy ! Component: 1600 - total flux cleaned = 0.00137023 Jy ! Component: 1650 - total flux cleaned = 0.00133275 Jy ! Component: 1700 - total flux cleaned = 0.0012399 Jy ! Component: 1750 - total flux cleaned = 0.00124003 Jy ! Component: 1800 - total flux cleaned = 0.00122188 Jy ! Component: 1850 - total flux cleaned = 0.0011675 Jy ! Component: 1900 - total flux cleaned = 0.00105962 Jy ! Component: 1950 - total flux cleaned = 0.000988245 Jy ! Component: 2000 - total flux cleaned = 0.000899563 Jy ! Component: 2050 - total flux cleaned = 0.000829001 Jy ! Component: 2100 - total flux cleaned = 0.000723855 Jy ! Component: 2150 - total flux cleaned = 0.000654136 Jy ! Component: 2200 - total flux cleaned = 0.000567425 Jy ! Component: 2250 - total flux cleaned = 0.000498325 Jy ! Component: 2300 - total flux cleaned = 0.000429539 Jy ! Component: 2350 - total flux cleaned = 0.000378111 Jy ! Component: 2400 - total flux cleaned = 0.000344057 Jy ! Component: 2450 - total flux cleaned = 0.000292982 Jy ! Component: 2500 - total flux cleaned = 0.000224928 Jy ! Component: 2550 - total flux cleaned = 0.000191002 Jy ! Component: 2600 - total flux cleaned = 0.000157162 Jy ! Component: 2650 - total flux cleaned = 0.000123451 Jy ! Component: 2700 - total flux cleaned = 0.000106553 Jy ! Component: 2750 - total flux cleaned = 2.25066e-05 Jy ! Component: 2800 - total flux cleaned = 5.68706e-06 Jy ! Component: 2850 - total flux cleaned = -2.78896e-05 Jy ! Component: 2900 - total flux cleaned = -9.49871e-05 Jy ! Component: 2950 - total flux cleaned = -0.000145273 Jy ! Component: 3000 - total flux cleaned = -0.000178833 Jy ! Component: 3050 - total flux cleaned = -0.000245633 Jy ! Component: 3100 - total flux cleaned = -0.000312564 Jy ! Component: 3150 - total flux cleaned = -0.000379349 Jy ! Component: 3200 - total flux cleaned = -0.000429395 Jy ! Component: 3250 - total flux cleaned = -0.000512921 Jy ! Component: 3300 - total flux cleaned = -0.000596304 Jy ! Component: 3350 - total flux cleaned = -0.000713215 Jy ! Component: 3400 - total flux cleaned = -0.000813449 Jy ! Component: 3450 - total flux cleaned = -0.0009306 Jy ! Component: 3500 - total flux cleaned = -0.00103153 Jy ! Component: 3550 - total flux cleaned = -0.00109895 Jy ! Component: 3600 - total flux cleaned = -0.00118394 Jy ! Component: 3650 - total flux cleaned = -0.00121805 Jy ! Component: 3700 - total flux cleaned = -0.00126962 Jy ! Component: 3750 - total flux cleaned = -0.00130415 Jy ! Component: 3800 - total flux cleaned = -0.00132146 Jy ! Component: 3850 - total flux cleaned = -0.0013914 Jy ! Component: 3900 - total flux cleaned = -0.00144446 Jy ! Component: 3950 - total flux cleaned = -0.00153351 Jy ! Component: 4000 - total flux cleaned = -0.0016231 Jy ! Component: 4050 - total flux cleaned = -0.00173185 Jy ! Total flux subtracted in 4096 components = -0.0017867 Jy ! Clean residual min=-0.001193 max=0.001058 Jy/beam ! Clean residual mean=0.000003 rms=0.000346 Jy/beam ! Combined flux in latest and established models = 0.238489 Jy keep ! Adding 235 model components to the UV plane model. ! The established model now contains 406 components and 0.238489 Jy ![Exited script file: muppet] wmap "J1637-3309_S_2017_07_09_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 5.153 x 37.27 at 6.714 degrees (North through East) ! Clean map min=-0.0023401 max=0.1606 Jy/beam ! Writing clean map to FITS file: J1637-3309_S_2017_07_09_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.160605 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000331067 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.618413 0.618413 1.23683 2.47365 4.9473 9.8946 19.7892 39.5784 79.1568 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0009 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.16 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 5.153 x 37.27 at 6.714 degrees (North through East) ! Clean map min=-0.0023401 max=0.1606 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J1637-3309_S_2017_07_09_pus_uvs.log closed on Wed May 8 14:53:21 2019