! Started logfile: J1636-4102_S_2017_07_16_pus_uvs.log on Thu May 9 11:13:10 2019 obs J1636-4102_S_2017_07_16_pus_uva.fits ! Reading UV FITS file: J1636-4102_S_2017_07_16_pus_uva.fits ! AN table 1: 154 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.231313 visibilities/baseline/integration-bin. ! *** This seems a bit low - see "help observe" on the binwid argument. ! Found source: J1636-4102 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 815 lines of history. ! ! Reading 6412 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J1636-4102_S_2017_07_16_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 776 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 776 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 929 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 1540 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.936397Jy sigma=0.005587 ! Fit after self-cal, rms=0.858468Jy sigma=0.005135 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.257 mas, bmaj=5.65 mas, bpa=2.875 degrees ! Estimated noise=4669.72 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.096856 Jy ! Component: 100 - total flux cleaned = 0.119557 Jy ! Total flux subtracted in 100 components = 0.119557 Jy ! Clean residual min=-0.036430 max=0.036232 Jy/beam ! Clean residual mean=0.001154 rms=0.013633 Jy/beam ! Combined flux in latest and established models = 0.119557 Jy ! Performing phase self-cal ! Adding 57 model components to the UV plane model. ! The established model now contains 57 components and 0.119557 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.213117Jy sigma=0.001287 ! Fit after self-cal, rms=0.212393Jy sigma=0.001283 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.58 mas, bmaj=6.529 mas, bpa=1.341 degrees ! Estimated noise=1825.44 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.02451 Jy ! Component: 100 - total flux cleaned = 0.0500652 Jy ! Component: 150 - total flux cleaned = 0.0798518 Jy ! Component: 200 - total flux cleaned = 0.107885 Jy ! Total flux subtracted in 200 components = 0.107885 Jy ! Clean residual min=-0.028363 max=0.028215 Jy/beam ! Clean residual mean=0.001306 rms=0.013893 Jy/beam ! Combined flux in latest and established models = 0.227441 Jy ! Performing phase self-cal ! Adding 174 model components to the UV plane model. ! The established model now contains 223 components and 0.227441 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.137942Jy sigma=0.000827 ! Fit after self-cal, rms=0.136261Jy sigma=0.000816 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* HN 1.00* KP 0.76 ! LA 1.08 MK 1.06 NL 1.00* OV 0.95 ! PT 1.00 SC 1.09 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* HN 1.00* KP 0.73 ! LA 0.98 MK 1.01 NL 1.00* OV 0.94 ! PT 1.01 SC 1.20 ! ! ! Correcting IF 3. ! A total of 231 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* HN 1.00* KP 0.73 ! LA 1.00* MK 1.16 NL 1.00* OV 0.77 ! PT 1.01 SC 1.09 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 0.00* FD 0.00* HN 0.00* KP 0.00* ! LA 0.00* MK 0.00* NL 0.00* OV 0.00* ! PT 0.00* SC 0.00* ! ! ! Fit before self-cal, rms=0.136261Jy sigma=0.000816 ! Fit after self-cal, rms=0.108406Jy sigma=0.000697 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.762 mas, bmaj=6.918 mas, bpa=-0.5084 degrees ! Estimated noise=1698.92 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.0140369 Jy ! Component: 100 - total flux cleaned = -0.0141627 Jy ! Component: 150 - total flux cleaned = -0.0130342 Jy ! Component: 200 - total flux cleaned = -0.0116212 Jy ! Total flux subtracted in 200 components = -0.0116212 Jy ! Clean residual min=-0.007602 max=0.007662 Jy/beam ! Clean residual mean=0.000365 rms=0.003619 Jy/beam ! Combined flux in latest and established models = 0.21582 Jy ! Performing phase self-cal ! Adding 109 model components to the UV plane model. ! The established model now contains 332 components and 0.21582 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.100608Jy sigma=0.000629 ! Fit after self-cal, rms=0.100376Jy sigma=0.000626 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.100376Jy sigma=0.000626 ! Fit after self-cal, rms=0.095229Jy sigma=0.000619 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.749 mas, bmaj=6.872 mas, bpa=-0.4996 degrees ! Estimated noise=1650.7 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000220291 Jy ! Component: 100 - total flux cleaned = -0.000575497 Jy ! Component: 150 - total flux cleaned = -0.00143885 Jy ! Component: 200 - total flux cleaned = -0.00243341 Jy ! Total flux subtracted in 200 components = -0.00243341 Jy ! Clean residual min=-0.003866 max=0.003888 Jy/beam ! Clean residual mean=0.000251 rms=0.002204 Jy/beam ! Combined flux in latest and established models = 0.213387 Jy selfcal ! Performing phase self-cal ! Adding 86 model components to the UV plane model. ! The established model now contains 411 components and 0.213387 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.093312Jy sigma=0.000604 ! Fit after self-cal, rms=0.092997Jy sigma=0.000603 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00158616 Jy ! Component: 100 - total flux cleaned = 0.000950128 Jy ! Component: 150 - total flux cleaned = 0.00150804 Jy ! Component: 200 - total flux cleaned = 0.00151009 Jy ! Total flux subtracted in 200 components = 0.00151009 Jy ! Clean residual min=-0.002708 max=0.002713 Jy/beam ! Clean residual mean=0.000204 rms=0.001656 Jy/beam ! Combined flux in latest and established models = 0.214897 Jy ! Performing phase self-cal ! Adding 88 model components to the UV plane model. ! The established model now contains 491 components and 0.214897 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.092228Jy sigma=0.000598 ! Fit after self-cal, rms=0.092073Jy sigma=0.000597 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.092073Jy sigma=0.000597 ! Fit after self-cal, rms=0.090839Jy sigma=0.000597 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.745 mas, bmaj=6.882 mas, bpa=-0.3176 degrees ! Estimated noise=1635.52 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000195773 Jy ! Component: 100 - total flux cleaned = -0.000341516 Jy ! Component: 150 - total flux cleaned = -5.97013e-05 Jy ! Component: 200 - total flux cleaned = -0.000192518 Jy ! Total flux subtracted in 200 components = -0.000192518 Jy ! Clean residual min=-0.002070 max=0.002076 Jy/beam ! Clean residual mean=0.000154 rms=0.001231 Jy/beam ! Combined flux in latest and established models = 0.214704 Jy selfcal ! Performing phase self-cal ! Adding 76 model components to the UV plane model. ! The established model now contains 549 components and 0.214704 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.090399Jy sigma=0.000594 ! Fit after self-cal, rms=0.090307Jy sigma=0.000594 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 6.59066e-05 Jy ! Component: 100 - total flux cleaned = 0.00019058 Jy ! Component: 150 - total flux cleaned = 0.00019247 Jy ! Component: 200 - total flux cleaned = 9.08557e-05 Jy ! Total flux subtracted in 200 components = 9.08557e-05 Jy ! Clean residual min=-0.001650 max=0.001658 Jy/beam ! Clean residual mean=0.000118 rms=0.000963 Jy/beam ! Combined flux in latest and established models = 0.214795 Jy ! Performing phase self-cal ! Adding 88 model components to the UV plane model. ! The established model now contains 615 components and 0.214795 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.090041Jy sigma=0.000592 ! Fit after self-cal, rms=0.090003Jy sigma=0.000592 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.090003Jy sigma=0.000592 ! Fit after self-cal, rms=0.089155Jy sigma=0.000592 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=10.21 mas, bmaj=26.73 mas, bpa=-3.567 degrees ! Estimated noise=2141.04 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000868384 Jy ! Component: 100 - total flux cleaned = -0.00142045 Jy ! Component: 150 - total flux cleaned = -0.00218793 Jy ! Component: 200 - total flux cleaned = -0.0023022 Jy ! Total flux subtracted in 200 components = -0.0023022 Jy ! Clean residual min=-0.001913 max=0.001932 Jy/beam ! Clean residual mean=0.000152 rms=0.001195 Jy/beam ! Combined flux in latest and established models = 0.212493 Jy selfcal ! Performing phase self-cal ! Adding 132 model components to the UV plane model. ! The established model now contains 745 components and 0.212493 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.088977Jy sigma=0.000590 ! Fit after self-cal, rms=0.088945Jy sigma=0.000590 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000836939 Jy ! Component: 100 - total flux cleaned = 0.00109166 Jy ! Component: 150 - total flux cleaned = 0.000937563 Jy ! Component: 200 - total flux cleaned = 0.00115622 Jy ! Total flux subtracted in 200 components = 0.00115622 Jy ! Clean residual min=-0.001193 max=0.001195 Jy/beam ! Clean residual mean=0.000091 rms=0.000750 Jy/beam ! Combined flux in latest and established models = 0.213649 Jy ! Performing phase self-cal ! Adding 104 model components to the UV plane model. ! The established model now contains 831 components and 0.213649 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.088878Jy sigma=0.000590 ! Fit after self-cal, rms=0.088867Jy sigma=0.000590 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=2.743 mas, bmaj=6.896 mas, bpa=-0.05304 degrees ! Estimated noise=1624.37 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.743 x 6.896 at -0.05304 degrees (North through East) ! Clean map min=-0.033281 max=0.10688 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.362 mas, bmaj=5.868 mas, bpa=1.704 degrees ! Estimated noise=4366.72 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0631398 Jy ! Component: 100 - total flux cleaned = 0.0836477 Jy ! Component: 150 - total flux cleaned = 0.0995512 Jy ! Component: 200 - total flux cleaned = 0.115959 Jy ! Total flux subtracted in 200 components = 0.115959 Jy ! Clean residual min=-0.022352 max=0.022330 Jy/beam ! Clean residual mean=0.000820 rms=0.009175 Jy/beam ! Combined flux in latest and established models = 0.115959 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 82 model components to the UV plane model. ! The established model now contains 82 components and 0.115959 Jy ! Inverting map and beam ! Estimated beam: bmin=2.743 mas, bmaj=6.896 mas, bpa=-0.05304 degrees ! Estimated noise=1624.37 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0435032 Jy ! Component: 100 - total flux cleaned = 0.0757691 Jy ! Component: 150 - total flux cleaned = 0.0967439 Jy ! Component: 200 - total flux cleaned = 0.111451 Jy ! Total flux subtracted in 200 components = 0.111451 Jy ! Clean residual min=-0.015549 max=0.015649 Jy/beam ! Clean residual mean=0.000707 rms=0.007710 Jy/beam ! Combined flux in latest and established models = 0.22741 Jy ! Adding 146 model components to the UV plane model. ! The established model now contains 219 components and 0.22741 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=10.21 mas, bmaj=26.73 mas, bpa=-3.567 degrees ! Estimated noise=2141.04 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0183792 Jy ! Component: 100 - total flux cleaned = 0.025525 Jy ! Component: 150 - total flux cleaned = 0.0203158 Jy ! Component: 200 - total flux cleaned = 0.0219121 Jy ! Total flux subtracted in 200 components = 0.0219121 Jy ! Clean residual min=-0.013604 max=0.013695 Jy/beam ! Clean residual mean=0.000619 rms=0.005217 Jy/beam ! Combined flux in latest and established models = 0.249322 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00355953 Jy ! Component: 100 - total flux cleaned = 0.00769535 Jy ! Component: 150 - total flux cleaned = 0.0103789 Jy ! Component: 200 - total flux cleaned = 0.0106787 Jy ! Total flux subtracted in 200 components = 0.0106787 Jy ! Clean residual min=-0.032091 max=0.031464 Jy/beam ! Clean residual mean=0.000752 rms=0.008696 Jy/beam ! Combined flux in latest and established models = 0.260001 Jy ! Adding 147 model components to the UV plane model. ! The established model now contains 362 components and 0.260001 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=2.743 mas, bmaj=6.896 mas, bpa=-0.05304 degrees ! Estimated noise=1624.37 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00275898 Jy ! Component: 100 - total flux cleaned = -0.00282311 Jy ! Component: 150 - total flux cleaned = -0.00373569 Jy ! Component: 200 - total flux cleaned = -0.00463022 Jy ! Total flux subtracted in 200 components = -0.00463022 Jy ! Clean residual min=-0.014741 max=0.014655 Jy/beam ! Clean residual mean=0.000090 rms=0.003372 Jy/beam ! Combined flux in latest and established models = 0.25537 Jy selfcal ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 374 components and 0.255371 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.093299Jy sigma=0.000620 ! Fit after self-cal, rms=0.091246Jy sigma=0.000608 wmodel J1636-4102_S_2017_07_16_pus_map.mod ! Writing 374 model components to file: J1636-4102_S_2017_07_16_pus_map.mod wobs J1636-4102_S_2017_07_16_pus_uvs.fits ! Writing UV FITS file: J1636-4102_S_2017_07_16_pus_uvs.fits wwins J1636-4102_S_2017_07_16_pus_map.win ! wwins: No CLEAN windows to write. ! Error occured in command: wwins ![Exited script file: muppet] ! wmap "J1636-4102_S_2017_07_16_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.743 x 6.896 at -0.05304 degrees (North through East) ! Clean map min=-0.02335 max=0.088566 Jy/beam ! Writing clean map to FITS file: J1636-4102_S_2017_07_16_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.0885658 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.00280962 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -9.51704 9.51704 19.0341 38.0682 76.1363 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0084 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.088 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.743 x 6.896 at -0.05304 degrees (North through East) ! Clean map min=-0.02335 max=0.088566 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J1636-4102_S_2017_07_16_pus_uvs.log closed on Thu May 9 11:13:13 2019