! Started logfile: J1635-1859_S_2017_08_12_pus_uvs.log on Fri May 10 15:03:24 2019 obs J1635-1859_S_2017_08_12_pus_uva.fits ! Reading UV FITS file: J1635-1859_S_2017_08_12_pus_uva.fits ! AN table 1: 155 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.704803 visibilities/baseline/integration-bin. ! Found source: J1635-1859 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 594 lines of history. ! ! Reading 19664 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J1635-1859_S_2017_08_12_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 321 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 321 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 240 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 1349 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.960272Jy sigma=0.007328 ! Fit after self-cal, rms=0.931719Jy sigma=0.007116 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.323 mas, bmaj=6.517 mas, bpa=-4.475 degrees ! Estimated noise=1345.61 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0557036 Jy ! Component: 100 - total flux cleaned = 0.0707244 Jy ! Total flux subtracted in 100 components = 0.0707244 Jy ! Clean residual min=-0.008257 max=0.019752 Jy/beam ! Clean residual mean=-0.000039 rms=0.002318 Jy/beam ! Combined flux in latest and established models = 0.0707244 Jy ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 11 components and 0.0707244 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.097427Jy sigma=0.000720 ! Fit after self-cal, rms=0.097016Jy sigma=0.000717 ! Inverting map ! Added new window around map position (-5, -8). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0159549 Jy ! Component: 100 - total flux cleaned = 0.0246295 Jy ! Total flux subtracted in 100 components = 0.0246295 Jy ! Clean residual min=-0.005436 max=0.012269 Jy/beam ! Clean residual mean=-0.000021 rms=0.001595 Jy/beam ! Combined flux in latest and established models = 0.0953539 Jy ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 22 components and 0.0953539 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.094001Jy sigma=0.000691 ! Fit after self-cal, rms=0.093281Jy sigma=0.000685 ! Inverting map ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0106361 Jy ! Component: 100 - total flux cleaned = 0.0158137 Jy ! Total flux subtracted in 100 components = 0.0158137 Jy ! Clean residual min=-0.004939 max=0.007349 Jy/beam ! Clean residual mean=-0.000011 rms=0.001302 Jy/beam ! Combined flux in latest and established models = 0.111168 Jy ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 29 components and 0.111168 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.091919Jy sigma=0.000674 ! Fit after self-cal, rms=0.091441Jy sigma=0.000670 ! Inverting map ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00745545 Jy ! Component: 100 - total flux cleaned = 0.0105146 Jy ! Total flux subtracted in 100 components = 0.0105146 Jy ! Clean residual min=-0.004473 max=0.004198 Jy/beam ! Clean residual mean=-0.000004 rms=0.001095 Jy/beam ! Combined flux in latest and established models = 0.121682 Jy ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 39 components and 0.121682 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.090788Jy sigma=0.000665 ! Fit after self-cal, rms=0.090516Jy sigma=0.000663 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.802 mas, bmaj=7.491 mas, bpa=-3.356 degrees ! Estimated noise=798.778 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00454213 Jy ! Component: 100 - total flux cleaned = 0.0047737 Jy ! Component: 150 - total flux cleaned = 0.00493249 Jy ! Component: 200 - total flux cleaned = 0.00497377 Jy ! Total flux subtracted in 200 components = 0.00497377 Jy ! Clean residual min=-0.003432 max=0.003727 Jy/beam ! Clean residual mean=-0.000002 rms=0.000834 Jy/beam ! Combined flux in latest and established models = 0.126656 Jy ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 48 components and 0.126656 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.090201Jy sigma=0.000660 ! Fit after self-cal, rms=0.089999Jy sigma=0.000659 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* HN 1.09 KP 1.03 ! LA 0.98 MK 1.04 NL 0.93 OV 0.99 ! PT 1.01 SC 0.93 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* HN 1.05 KP 1.00 ! LA 0.98 MK 1.01 NL 1.09 OV 1.01 ! PT 1.00 SC 1.04 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 0.97 FD 1.00* HN 1.08 KP 0.96 ! LA 0.96 MK 1.04 NL 1.10 OV 0.96 ! PT 0.97 SC 0.99 ! ! ! Correcting IF 4. ! A total of 201 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.00* FD 0.00* HN 0.00* KP 0.00* ! LA 0.00* MK 0.00* NL 0.00* OV 0.00* ! PT 0.00* SC 0.00* ! ! ! Fit before self-cal, rms=0.089999Jy sigma=0.000659 ! Fit after self-cal, rms=0.091559Jy sigma=0.000659 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.84 mas, bmaj=7.477 mas, bpa=-2.429 degrees ! Estimated noise=814.73 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00142884 Jy ! Component: 100 - total flux cleaned = 0.00118369 Jy ! Component: 150 - total flux cleaned = 0.000788322 Jy ! Component: 200 - total flux cleaned = 0.000526026 Jy ! Total flux subtracted in 200 components = 0.000526026 Jy ! Clean residual min=-0.003196 max=0.002771 Jy/beam ! Clean residual mean=0.000002 rms=0.000728 Jy/beam ! Combined flux in latest and established models = 0.127182 Jy ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 56 components and 0.127182 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.091430Jy sigma=0.000658 ! Fit after self-cal, rms=0.091398Jy sigma=0.000658 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.091398Jy sigma=0.000658 ! Fit after self-cal, rms=0.093582Jy sigma=0.000656 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.851 mas, bmaj=7.491 mas, bpa=-2.547 degrees ! Estimated noise=816.568 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000699198 Jy ! Component: 100 - total flux cleaned = 0.000338303 Jy ! Component: 150 - total flux cleaned = 9.65563e-05 Jy ! Component: 200 - total flux cleaned = -7.33854e-05 Jy ! Total flux subtracted in 200 components = -7.33854e-05 Jy ! Clean residual min=-0.002819 max=0.002103 Jy/beam ! Clean residual mean=-0.000000 rms=0.000532 Jy/beam ! Combined flux in latest and established models = 0.127109 Jy selfcal ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 64 components and 0.127109 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.093540Jy sigma=0.000656 ! Fit after self-cal, rms=0.093563Jy sigma=0.000655 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000355882 Jy ! Component: 100 - total flux cleaned = 0.00015328 Jy ! Component: 150 - total flux cleaned = 4.44084e-05 Jy ! Component: 200 - total flux cleaned = -4.69543e-05 Jy ! Total flux subtracted in 200 components = -4.69543e-05 Jy ! Clean residual min=-0.002730 max=0.002150 Jy/beam ! Clean residual mean=-0.000001 rms=0.000516 Jy/beam ! Combined flux in latest and established models = 0.127062 Jy ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 72 components and 0.127062 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.093541Jy sigma=0.000655 ! Fit after self-cal, rms=0.093521Jy sigma=0.000655 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.093521Jy sigma=0.000655 ! Fit after self-cal, rms=0.094264Jy sigma=0.000655 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.86 mas, bmaj=7.489 mas, bpa=-2.581 degrees ! Estimated noise=817.864 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000182072 Jy ! Component: 100 - total flux cleaned = 4.17286e-05 Jy ! Component: 150 - total flux cleaned = -4.64469e-05 Jy ! Component: 200 - total flux cleaned = -0.000120234 Jy ! Total flux subtracted in 200 components = -0.000120234 Jy ! Clean residual min=-0.002504 max=0.002096 Jy/beam ! Clean residual mean=-0.000001 rms=0.000499 Jy/beam ! Combined flux in latest and established models = 0.126941 Jy selfcal ! Performing phase self-cal ! Adding 25 model components to the UV plane model. ! The established model now contains 81 components and 0.126941 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.094251Jy sigma=0.000655 ! Fit after self-cal, rms=0.094252Jy sigma=0.000655 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000100074 Jy ! Component: 100 - total flux cleaned = 2.21113e-05 Jy ! Component: 150 - total flux cleaned = -2.83116e-05 Jy ! Component: 200 - total flux cleaned = -5.77106e-05 Jy ! Total flux subtracted in 200 components = -5.77106e-05 Jy ! Clean residual min=-0.002423 max=0.002088 Jy/beam ! Clean residual mean=-0.000001 rms=0.000493 Jy/beam ! Combined flux in latest and established models = 0.126884 Jy ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 85 components and 0.126884 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.094245Jy sigma=0.000655 ! Fit after self-cal, rms=0.094242Jy sigma=0.000655 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.094242Jy sigma=0.000655 ! Fit after self-cal, rms=0.094509Jy sigma=0.000655 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=6.965 mas, bmaj=16.41 mas, bpa=-1.149 degrees ! Estimated noise=1086.16 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000515293 Jy ! Component: 100 - total flux cleaned = -0.000517067 Jy ! Component: 150 - total flux cleaned = -0.000479612 Jy ! Component: 200 - total flux cleaned = -0.000451 Jy ! Total flux subtracted in 200 components = -0.000451 Jy ! Clean residual min=-0.001984 max=0.001684 Jy/beam ! Clean residual mean=-0.000003 rms=0.000518 Jy/beam ! Combined flux in latest and established models = 0.126433 Jy selfcal ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 93 components and 0.126433 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.094509Jy sigma=0.000655 ! Fit after self-cal, rms=0.094500Jy sigma=0.000655 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000199731 Jy ! Component: 100 - total flux cleaned = -0.000172794 Jy ! Component: 150 - total flux cleaned = -0.000141042 Jy ! Component: 200 - total flux cleaned = -0.00011532 Jy ! Total flux subtracted in 200 components = -0.00011532 Jy ! Clean residual min=-0.001889 max=0.001664 Jy/beam ! Clean residual mean=-0.000004 rms=0.000513 Jy/beam ! Combined flux in latest and established models = 0.126317 Jy ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 99 components and 0.126317 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.094503Jy sigma=0.000655 ! Fit after self-cal, rms=0.094498Jy sigma=0.000655 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=2.864 mas, bmaj=7.483 mas, bpa=-2.596 degrees ! Estimated noise=819.155 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.864 x 7.483 at -2.596 degrees (North through East) ! Clean map min=-0.0021888 max=0.063074 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.368 mas, bmaj=6.444 mas, bpa=-3.642 degrees ! Estimated noise=1378.99 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0596723 Jy ! Component: 100 - total flux cleaned = 0.0871515 Jy ! Component: 150 - total flux cleaned = 0.101031 Jy ! Component: 200 - total flux cleaned = 0.109054 Jy ! Total flux subtracted in 200 components = 0.109054 Jy ! Clean residual min=-0.004039 max=0.004635 Jy/beam ! Clean residual mean=-0.000014 rms=0.001035 Jy/beam ! Combined flux in latest and established models = 0.109054 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 17 model components to the UV plane model. ! The established model now contains 17 components and 0.109054 Jy ! Inverting map and beam ! Estimated beam: bmin=2.864 mas, bmaj=7.483 mas, bpa=-2.596 degrees ! Estimated noise=819.155 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00695989 Jy ! Component: 100 - total flux cleaned = 0.011101 Jy ! Component: 150 - total flux cleaned = 0.0136715 Jy ! Component: 200 - total flux cleaned = 0.0153428 Jy ! Total flux subtracted in 200 components = 0.0153428 Jy ! Clean residual min=-0.002031 max=0.002105 Jy/beam ! Clean residual mean=-0.000004 rms=0.000518 Jy/beam ! Combined flux in latest and established models = 0.124397 Jy ! Adding 29 model components to the UV plane model. ! The established model now contains 45 components and 0.124397 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=6.965 mas, bmaj=16.41 mas, bpa=-1.149 degrees ! Estimated noise=1086.16 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0015718 Jy ! Component: 100 - total flux cleaned = 0.00183122 Jy ! Component: 150 - total flux cleaned = 0.0019014 Jy ! Component: 200 - total flux cleaned = 0.00195853 Jy ! Total flux subtracted in 200 components = 0.00195853 Jy ! Clean residual min=-0.002003 max=0.001623 Jy/beam ! Clean residual mean=-0.000004 rms=0.000520 Jy/beam ! Combined flux in latest and established models = 0.126355 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 5.02495e-05 Jy ! Component: 100 - total flux cleaned = 9.14774e-05 Jy ! Component: 150 - total flux cleaned = 0.000126207 Jy ! Component: 200 - total flux cleaned = 0.000126509 Jy ! Total flux subtracted in 200 components = 0.000126509 Jy ! Clean residual min=-0.001885 max=0.001615 Jy/beam ! Clean residual mean=-0.000003 rms=0.000515 Jy/beam ! Combined flux in latest and established models = 0.126482 Jy ! Adding 29 model components to the UV plane model. ! The established model now contains 67 components and 0.126482 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=2.864 mas, bmaj=7.483 mas, bpa=-2.596 degrees ! Estimated noise=819.155 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000336489 Jy ! Component: 100 - total flux cleaned = 0.000360625 Jy ! Component: 150 - total flux cleaned = 0.000382078 Jy ! Component: 200 - total flux cleaned = 0.000402402 Jy ! Total flux subtracted in 200 components = 0.000402402 Jy ! Clean residual min=-0.001965 max=0.002032 Jy/beam ! Clean residual mean=-0.000001 rms=0.000497 Jy/beam ! Combined flux in latest and established models = 0.126884 Jy selfcal ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 76 components and 0.126884 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.094519Jy sigma=0.000655 ! Fit after self-cal, rms=0.094507Jy sigma=0.000655 wmodel J1635-1859_S_2017_08_12_pus_map.mod ! Writing 76 model components to file: J1635-1859_S_2017_08_12_pus_map.mod wobs J1635-1859_S_2017_08_12_pus_uvs.fits ! Writing UV FITS file: J1635-1859_S_2017_08_12_pus_uvs.fits wwins J1635-1859_S_2017_08_12_pus_map.win ! wwins: Wrote 2 windows to J1635-1859_S_2017_08_12_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.000206962 Jy ! Component: 100 - total flux cleaned = 0.000546081 Jy ! Component: 150 - total flux cleaned = 0.000891453 Jy ! Component: 200 - total flux cleaned = 0.00125183 Jy ! Component: 250 - total flux cleaned = 0.00148222 Jy ! Component: 300 - total flux cleaned = 0.00170418 Jy ! Component: 350 - total flux cleaned = 0.00192008 Jy ! Component: 400 - total flux cleaned = 0.00215601 Jy ! Component: 450 - total flux cleaned = 0.00236059 Jy ! Component: 500 - total flux cleaned = 0.0025355 Jy ! Component: 550 - total flux cleaned = 0.0027063 Jy ! Component: 600 - total flux cleaned = 0.00284922 Jy ! Component: 650 - total flux cleaned = 0.00298941 Jy ! Component: 700 - total flux cleaned = 0.00314931 Jy ! Component: 750 - total flux cleaned = 0.00332796 Jy ! Component: 800 - total flux cleaned = 0.00339328 Jy ! Component: 850 - total flux cleaned = 0.00354359 Jy ! Component: 900 - total flux cleaned = 0.00367034 Jy ! Component: 950 - total flux cleaned = 0.00379487 Jy ! Component: 1000 - total flux cleaned = 0.00393749 Jy ! Component: 1050 - total flux cleaned = 0.00407778 Jy ! Component: 1100 - total flux cleaned = 0.00417594 Jy ! Component: 1150 - total flux cleaned = 0.00429262 Jy ! Component: 1200 - total flux cleaned = 0.00436917 Jy ! Component: 1250 - total flux cleaned = 0.00448223 Jy ! Component: 1300 - total flux cleaned = 0.00450084 Jy ! Component: 1350 - total flux cleaned = 0.00451946 Jy ! Component: 1400 - total flux cleaned = 0.00453772 Jy ! Component: 1450 - total flux cleaned = 0.00457372 Jy ! Component: 1500 - total flux cleaned = 0.00462647 Jy ! Component: 1550 - total flux cleaned = 0.00466135 Jy ! Component: 1600 - total flux cleaned = 0.00471286 Jy ! Component: 1650 - total flux cleaned = 0.00472973 Jy ! Component: 1700 - total flux cleaned = 0.00472965 Jy ! Component: 1750 - total flux cleaned = 0.00476285 Jy ! Component: 1800 - total flux cleaned = 0.00479571 Jy ! Component: 1850 - total flux cleaned = 0.00486012 Jy ! Component: 1900 - total flux cleaned = 0.00484388 Jy ! Component: 1950 - total flux cleaned = 0.0048913 Jy ! Component: 2000 - total flux cleaned = 0.00493828 Jy ! Component: 2050 - total flux cleaned = 0.00496886 Jy ! Component: 2100 - total flux cleaned = 0.00499932 Jy ! Component: 2150 - total flux cleaned = 0.00501442 Jy ! Component: 2200 - total flux cleaned = 0.00508908 Jy ! Component: 2250 - total flux cleaned = 0.0051186 Jy ! Component: 2300 - total flux cleaned = 0.00519193 Jy ! Component: 2350 - total flux cleaned = 0.00524985 Jy ! Component: 2400 - total flux cleaned = 0.00529293 Jy ! Component: 2450 - total flux cleaned = 0.00537788 Jy ! Component: 2500 - total flux cleaned = 0.00546196 Jy ! Component: 2550 - total flux cleaned = 0.00547603 Jy ! Component: 2600 - total flux cleaned = 0.0055589 Jy ! Component: 2650 - total flux cleaned = 0.00564076 Jy ! Component: 2700 - total flux cleaned = 0.00570825 Jy ! Component: 2750 - total flux cleaned = 0.00576159 Jy ! Component: 2800 - total flux cleaned = 0.00582784 Jy ! Component: 2850 - total flux cleaned = 0.00584095 Jy ! Component: 2900 - total flux cleaned = 0.00588005 Jy ! Component: 2950 - total flux cleaned = 0.0059447 Jy ! Component: 3000 - total flux cleaned = 0.00598308 Jy ! Component: 3050 - total flux cleaned = 0.00603374 Jy ! Component: 3100 - total flux cleaned = 0.00602117 Jy ! Component: 3150 - total flux cleaned = 0.00604619 Jy ! Component: 3200 - total flux cleaned = 0.00605865 Jy ! Component: 3250 - total flux cleaned = 0.00608319 Jy ! Component: 3300 - total flux cleaned = 0.00608323 Jy ! Component: 3350 - total flux cleaned = 0.00610756 Jy ! Component: 3400 - total flux cleaned = 0.00611967 Jy ! Component: 3450 - total flux cleaned = 0.00611977 Jy ! Component: 3500 - total flux cleaned = 0.0062031 Jy ! Component: 3550 - total flux cleaned = 0.00621495 Jy ! Component: 3600 - total flux cleaned = 0.00627342 Jy ! Component: 3650 - total flux cleaned = 0.00628497 Jy ! Component: 3700 - total flux cleaned = 0.00631963 Jy ! Component: 3750 - total flux cleaned = 0.00631983 Jy ! Component: 3800 - total flux cleaned = 0.00638817 Jy ! Component: 3850 - total flux cleaned = 0.00637688 Jy ! Component: 3900 - total flux cleaned = 0.0063656 Jy ! Component: 3950 - total flux cleaned = 0.00637677 Jy ! Component: 4000 - total flux cleaned = 0.00641 Jy ! Component: 4050 - total flux cleaned = 0.00643212 Jy ! Total flux subtracted in 4096 components = 0.00643218 Jy ! Clean residual min=-0.000680 max=0.000647 Jy/beam ! Clean residual mean=-0.000002 rms=0.000191 Jy/beam ! Combined flux in latest and established models = 0.133317 Jy keep ! Adding 253 model components to the UV plane model. ! The established model now contains 329 components and 0.133317 Jy ![Exited script file: muppet] wmap "J1635-1859_S_2017_08_12_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.864 x 7.483 at -2.596 degrees (North through East) ! Clean map min=-0.0012317 max=0.062231 Jy/beam ! Writing clean map to FITS file: J1635-1859_S_2017_08_12_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.0622311 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000190241 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.9171 0.9171 1.8342 3.6684 7.3368 14.6736 29.3472 58.6944 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0005 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.062 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.864 x 7.483 at -2.596 degrees (North through East) ! Clean map min=-0.0012317 max=0.062231 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J1635-1859_S_2017_08_12_pus_uvs.log closed on Fri May 10 15:03:28 2019