! Started logfile: J1634+6245_S_2017_08_12_pus_uvs.log on Fri May 10 15:03:18 2019 obs J1634+6245_S_2017_08_12_pus_uva.fits ! Reading UV FITS file: J1634+6245_S_2017_08_12_pus_uva.fits ! AN table 1: 218 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.9158 visibilities/baseline/integration-bin. ! Found source: J1634+6245 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 594 lines of history. ! ! Reading 35936 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J1634+6245_S_2017_08_12_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 95 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 95 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 95 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 1231 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.921754Jy sigma=0.007877 ! Fit after self-cal, rms=0.887120Jy sigma=0.007588 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.162 mas, bmaj=3.476 mas, bpa=22.84 degrees ! Estimated noise=1024.6 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0829375 Jy ! Component: 100 - total flux cleaned = 0.123352 Jy ! Total flux subtracted in 100 components = 0.123352 Jy ! Clean residual min=-0.022794 max=0.030769 Jy/beam ! Clean residual mean=-0.000568 rms=0.006950 Jy/beam ! Combined flux in latest and established models = 0.123352 Jy ! Performing phase self-cal ! Adding 35 model components to the UV plane model. ! The established model now contains 35 components and 0.123352 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.245807Jy sigma=0.002151 ! Fit after self-cal, rms=0.245604Jy sigma=0.002149 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.998 mas, bmaj=4.282 mas, bpa=33.15 degrees ! Estimated noise=495.972 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0714493 Jy ! Component: 100 - total flux cleaned = 0.116016 Jy ! Component: 150 - total flux cleaned = 0.143967 Jy ! Component: 200 - total flux cleaned = 0.161495 Jy ! Total flux subtracted in 200 components = 0.161495 Jy ! Clean residual min=-0.047781 max=0.051674 Jy/beam ! Clean residual mean=-0.001492 rms=0.013663 Jy/beam ! Combined flux in latest and established models = 0.284847 Jy ! Performing phase self-cal ! Adding 23 model components to the UV plane model. ! The established model now contains 49 components and 0.284847 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.221553Jy sigma=0.001962 ! Fit after self-cal, rms=0.220710Jy sigma=0.001953 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 3.08 FD 1.06 HN 3.15 KP 0.99 ! LA 0.45 MK 1.20 NL 2.82 OV 2.62 ! PT 0.58 SC 1.07 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 2.79 FD 1.08 HN 3.18 KP 0.93 ! LA 0.45 MK 1.25 NL 3.44 OV 2.63 ! PT 0.58 SC 0.98 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 2.35 FD 1.05 HN 2.72 KP 0.91 ! LA 0.46 MK 1.30 NL 3.20 OV 2.56 ! PT 0.59 SC 0.95 ! ! ! Correcting IF 4. ! A total of 144 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.38 HN 3.14 KP 1.00* ! LA 0.44 MK 1.87 NL 1.00* OV 1.00* ! PT 0.63 SC 1.00* ! ! ! Fit before self-cal, rms=0.220710Jy sigma=0.001953 ! Fit after self-cal, rms=0.520297Jy sigma=0.001410 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=4.271 mas, bmaj=4.698 mas, bpa=39.54 degrees ! Estimated noise=656.427 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0171207 Jy ! Component: 100 - total flux cleaned = 0.0155968 Jy ! Component: 150 - total flux cleaned = 0.0153222 Jy ! Component: 200 - total flux cleaned = 0.0150967 Jy ! Total flux subtracted in 200 components = 0.0150967 Jy ! Clean residual min=-0.036207 max=0.052791 Jy/beam ! Clean residual mean=-0.000804 rms=0.011050 Jy/beam ! Combined flux in latest and established models = 0.299944 Jy ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 53 components and 0.299944 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.515915Jy sigma=0.001416 ! Fit after self-cal, rms=0.531533Jy sigma=0.001380 ! Inverting map ! Added new window around map position (42, 17.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0476538 Jy ! Component: 100 - total flux cleaned = 0.0542311 Jy ! Component: 150 - total flux cleaned = 0.0561763 Jy ! Component: 200 - total flux cleaned = 0.0562221 Jy ! Total flux subtracted in 200 components = 0.0562221 Jy ! Clean residual min=-0.036337 max=0.042618 Jy/beam ! Clean residual mean=-0.000948 rms=0.010754 Jy/beam ! Combined flux in latest and established models = 0.356166 Jy ! Performing phase self-cal ! Adding 24 model components to the UV plane model. ! The established model now contains 76 components and 0.356166 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.520836Jy sigma=0.001349 ! Fit after self-cal, rms=0.517492Jy sigma=0.001318 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.517492Jy sigma=0.001318 ! Fit after self-cal, rms=0.688422Jy sigma=0.001177 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=4.327 mas, bmaj=5.062 mas, bpa=12.66 degrees ! Estimated noise=668.815 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0242499 Jy ! Component: 100 - total flux cleaned = 0.0310383 Jy ! Component: 150 - total flux cleaned = 0.0323593 Jy ! Component: 200 - total flux cleaned = 0.0320658 Jy ! Total flux subtracted in 200 components = 0.0320658 Jy ! Clean residual min=-0.034682 max=0.039612 Jy/beam ! Clean residual mean=-0.000016 rms=0.008924 Jy/beam ! Combined flux in latest and established models = 0.388231 Jy selfcal ! Performing phase self-cal ! Adding 33 model components to the UV plane model. ! The established model now contains 102 components and 0.388231 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.685678Jy sigma=0.001172 ! Fit after self-cal, rms=0.684792Jy sigma=0.001160 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (70.5, -64). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0354025 Jy ! Component: 100 - total flux cleaned = 0.0466802 Jy ! Component: 150 - total flux cleaned = 0.0562228 Jy ! Component: 200 - total flux cleaned = 0.0643122 Jy ! Total flux subtracted in 200 components = 0.0643122 Jy ! Clean residual min=-0.029230 max=0.031260 Jy/beam ! Clean residual mean=-0.000399 rms=0.008214 Jy/beam ! Combined flux in latest and established models = 0.452544 Jy ! Performing phase self-cal ! Adding 50 model components to the UV plane model. ! The established model now contains 147 components and 0.452544 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.680138Jy sigma=0.001121 ! Fit after self-cal, rms=0.680404Jy sigma=0.001109 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.680404Jy sigma=0.001109 ! Fit after self-cal, rms=0.732840Jy sigma=0.001080 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=4.434 mas, bmaj=5.531 mas, bpa=8.995 degrees ! Estimated noise=677.08 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0192865 Jy ! Component: 100 - total flux cleaned = 0.0287366 Jy ! Component: 150 - total flux cleaned = 0.0318725 Jy ! Component: 200 - total flux cleaned = 0.0343456 Jy ! Total flux subtracted in 200 components = 0.0343456 Jy ! Clean residual min=-0.027737 max=0.029434 Jy/beam ! Clean residual mean=-0.000331 rms=0.007738 Jy/beam ! Combined flux in latest and established models = 0.486889 Jy selfcal ! Performing phase self-cal ! Adding 43 model components to the UV plane model. ! The established model now contains 164 components and 0.486889 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.730462Jy sigma=0.001077 ! Fit after self-cal, rms=0.731554Jy sigma=0.001071 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00627139 Jy ! Component: 100 - total flux cleaned = 0.00798258 Jy ! Component: 150 - total flux cleaned = 0.00895042 Jy ! Component: 200 - total flux cleaned = 0.00956367 Jy ! Total flux subtracted in 200 components = 0.00956367 Jy ! Clean residual min=-0.027189 max=0.028937 Jy/beam ! Clean residual mean=-0.000305 rms=0.007638 Jy/beam ! Combined flux in latest and established models = 0.496453 Jy ! Performing phase self-cal ! Adding 29 model components to the UV plane model. ! The established model now contains 173 components and 0.496453 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.730283Jy sigma=0.001071 ! Fit after self-cal, rms=0.730613Jy sigma=0.001070 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.730613Jy sigma=0.001070 ! Fit after self-cal, rms=0.829899Jy sigma=0.001064 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=11.13 mas, bmaj=12.31 mas, bpa=66.55 degrees ! Estimated noise=634.014 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00819092 Jy ! Component: 100 - total flux cleaned = 0.00779828 Jy ! Component: 150 - total flux cleaned = 0.00778985 Jy ! Component: 200 - total flux cleaned = 0.00745151 Jy ! Total flux subtracted in 200 components = 0.00745151 Jy ! Clean residual min=-0.034413 max=0.037470 Jy/beam ! Clean residual mean=-0.000388 rms=0.010795 Jy/beam ! Combined flux in latest and established models = 0.503904 Jy selfcal ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 182 components and 0.503904 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.828584Jy sigma=0.001065 ! Fit after self-cal, rms=0.828948Jy sigma=0.001063 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00203539 Jy ! Component: 100 - total flux cleaned = 0.00203646 Jy ! Component: 150 - total flux cleaned = 0.00174949 Jy ! Component: 200 - total flux cleaned = 0.00147065 Jy ! Total flux subtracted in 200 components = 0.00147065 Jy ! Clean residual min=-0.033573 max=0.036441 Jy/beam ! Clean residual mean=-0.000360 rms=0.010716 Jy/beam ! Combined flux in latest and established models = 0.505375 Jy ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 187 components and 0.505375 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.828065Jy sigma=0.001065 ! Fit after self-cal, rms=0.827948Jy sigma=0.001065 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=4.523 mas, bmaj=5.795 mas, bpa=6.436 degrees ! Estimated noise=696.945 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 4.523 x 5.795 at 6.436 degrees (North through East) ! Clean map min=-0.026766 max=0.17913 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.163 mas, bmaj=4.452 mas, bpa=6.292 degrees ! Estimated noise=1815.28 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.13066 Jy ! Component: 100 - total flux cleaned = 0.198322 Jy ! Component: 150 - total flux cleaned = 0.248477 Jy ! Component: 200 - total flux cleaned = 0.289847 Jy ! Total flux subtracted in 200 components = 0.289847 Jy ! Clean residual min=-0.034392 max=0.032500 Jy/beam ! Clean residual mean=-0.000289 rms=0.008900 Jy/beam ! Combined flux in latest and established models = 0.289847 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 43 model components to the UV plane model. ! The established model now contains 43 components and 0.289847 Jy ! Inverting map and beam ! Estimated beam: bmin=4.523 mas, bmaj=5.795 mas, bpa=6.436 degrees ! Estimated noise=696.945 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0458999 Jy ! Component: 100 - total flux cleaned = 0.0798863 Jy ! Component: 150 - total flux cleaned = 0.107728 Jy ! Component: 200 - total flux cleaned = 0.130308 Jy ! Total flux subtracted in 200 components = 0.130308 Jy ! Clean residual min=-0.031819 max=0.032473 Jy/beam ! Clean residual mean=-0.000356 rms=0.008758 Jy/beam ! Combined flux in latest and established models = 0.420156 Jy ! Adding 38 model components to the UV plane model. ! The established model now contains 67 components and 0.420155 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=11.13 mas, bmaj=12.31 mas, bpa=66.55 degrees ! Estimated noise=634.014 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0274669 Jy ! Component: 100 - total flux cleaned = 0.0395617 Jy ! Component: 150 - total flux cleaned = 0.0461657 Jy ! Component: 200 - total flux cleaned = 0.0513318 Jy ! Total flux subtracted in 200 components = 0.0513318 Jy ! Clean residual min=-0.038115 max=0.036155 Jy/beam ! Clean residual mean=-0.000450 rms=0.011304 Jy/beam ! Combined flux in latest and established models = 0.471487 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00457421 Jy ! Component: 100 - total flux cleaned = 0.00815921 Jy ! Component: 150 - total flux cleaned = 0.0105174 Jy ! Component: 200 - total flux cleaned = 0.0130849 Jy ! Total flux subtracted in 200 components = 0.0130849 Jy ! Clean residual min=-0.035809 max=0.035481 Jy/beam ! Clean residual mean=-0.000423 rms=0.010994 Jy/beam ! Combined flux in latest and established models = 0.484572 Jy ! Adding 49 model components to the UV plane model. ! The established model now contains 96 components and 0.484572 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=4.523 mas, bmaj=5.795 mas, bpa=6.436 degrees ! Estimated noise=696.945 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00623816 Jy ! Component: 100 - total flux cleaned = 0.00628879 Jy ! Component: 150 - total flux cleaned = 0.00630565 Jy ! Component: 200 - total flux cleaned = 0.00587434 Jy ! Total flux subtracted in 200 components = 0.00587434 Jy ! Clean residual min=-0.028682 max=0.029177 Jy/beam ! Clean residual mean=-0.000301 rms=0.007944 Jy/beam ! Combined flux in latest and established models = 0.490446 Jy selfcal ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 113 components and 0.490446 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.827030Jy sigma=0.001080 ! Fit after self-cal, rms=0.826824Jy sigma=0.001078 wmodel J1634+6245_S_2017_08_12_pus_map.mod ! Writing 113 model components to file: J1634+6245_S_2017_08_12_pus_map.mod wobs J1634+6245_S_2017_08_12_pus_uvs.fits ! Writing UV FITS file: J1634+6245_S_2017_08_12_pus_uvs.fits wwins J1634+6245_S_2017_08_12_pus_map.win ! wwins: Wrote 3 windows to J1634+6245_S_2017_08_12_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.00485543 Jy ! Component: 100 - total flux cleaned = 0.00779617 Jy ! Component: 150 - total flux cleaned = 0.00920584 Jy ! Component: 200 - total flux cleaned = 0.0109954 Jy ! Component: 250 - total flux cleaned = 0.0122941 Jy ! Component: 300 - total flux cleaned = 0.014395 Jy ! Component: 350 - total flux cleaned = 0.0176509 Jy ! Component: 400 - total flux cleaned = 0.020432 Jy ! Component: 450 - total flux cleaned = 0.0231545 Jy ! Component: 500 - total flux cleaned = 0.0254357 Jy ! Component: 550 - total flux cleaned = 0.0280492 Jy ! Component: 600 - total flux cleaned = 0.0309794 Jy ! Component: 650 - total flux cleaned = 0.0327803 Jy ! Component: 700 - total flux cleaned = 0.0349032 Jy ! Component: 750 - total flux cleaned = 0.0376839 Jy ! Component: 800 - total flux cleaned = 0.0390556 Jy ! Component: 850 - total flux cleaned = 0.0417611 Jy ! Component: 900 - total flux cleaned = 0.0430966 Jy ! Component: 950 - total flux cleaned = 0.045401 Jy ! Component: 1000 - total flux cleaned = 0.0476677 Jy ! Component: 1050 - total flux cleaned = 0.0489451 Jy ! Component: 1100 - total flux cleaned = 0.049888 Jy ! Component: 1150 - total flux cleaned = 0.0511355 Jy ! Component: 1200 - total flux cleaned = 0.0526725 Jy ! Component: 1250 - total flux cleaned = 0.0541897 Jy ! Component: 1300 - total flux cleaned = 0.0544914 Jy ! Component: 1350 - total flux cleaned = 0.0562718 Jy ! Component: 1400 - total flux cleaned = 0.057152 Jy ! Component: 1450 - total flux cleaned = 0.058891 Jy ! Component: 1500 - total flux cleaned = 0.0600372 Jy ! Component: 1550 - total flux cleaned = 0.0608906 Jy ! Component: 1600 - total flux cleaned = 0.0631397 Jy ! Component: 1650 - total flux cleaned = 0.0639731 Jy ! Component: 1700 - total flux cleaned = 0.0656289 Jy ! Component: 1750 - total flux cleaned = 0.0675393 Jy ! Component: 1800 - total flux cleaned = 0.0678096 Jy ! Component: 1850 - total flux cleaned = 0.0694153 Jy ! Component: 1900 - total flux cleaned = 0.0707426 Jy ! Component: 1950 - total flux cleaned = 0.0717956 Jy ! Component: 2000 - total flux cleaned = 0.0731016 Jy ! Component: 2050 - total flux cleaned = 0.0746539 Jy ! Component: 2100 - total flux cleaned = 0.0756766 Jy ! Component: 2150 - total flux cleaned = 0.0774516 Jy ! Component: 2200 - total flux cleaned = 0.0779552 Jy ! Component: 2250 - total flux cleaned = 0.078709 Jy ! Component: 2300 - total flux cleaned = 0.0806882 Jy ! Component: 2350 - total flux cleaned = 0.0816686 Jy ! Component: 2400 - total flux cleaned = 0.0833739 Jy ! Component: 2450 - total flux cleaned = 0.0843382 Jy ! Component: 2500 - total flux cleaned = 0.0860132 Jy ! Component: 2550 - total flux cleaned = 0.0874349 Jy ! Component: 2600 - total flux cleaned = 0.0879067 Jy ! Component: 2650 - total flux cleaned = 0.0893133 Jy ! Component: 2700 - total flux cleaned = 0.0904794 Jy ! Component: 2750 - total flux cleaned = 0.0916328 Jy ! Component: 2800 - total flux cleaned = 0.0932364 Jy ! Component: 2850 - total flux cleaned = 0.0943724 Jy ! Component: 2900 - total flux cleaned = 0.0950508 Jy ! Component: 2950 - total flux cleaned = 0.0968459 Jy ! Component: 3000 - total flux cleaned = 0.0984041 Jy ! Component: 3050 - total flux cleaned = 0.0990695 Jy ! Component: 3100 - total flux cleaned = 0.0997278 Jy ! Component: 3150 - total flux cleaned = 0.100603 Jy ! Component: 3200 - total flux cleaned = 0.101904 Jy ! Component: 3250 - total flux cleaned = 0.103414 Jy ! Component: 3300 - total flux cleaned = 0.104267 Jy ! Component: 3350 - total flux cleaned = 0.105115 Jy ! Component: 3400 - total flux cleaned = 0.105329 Jy ! Component: 3450 - total flux cleaned = 0.106591 Jy ! Component: 3500 - total flux cleaned = 0.107426 Jy ! Component: 3550 - total flux cleaned = 0.107426 Jy ! Component: 3600 - total flux cleaned = 0.10846 Jy ! Component: 3650 - total flux cleaned = 0.109281 Jy ! Component: 3700 - total flux cleaned = 0.110097 Jy ! Component: 3750 - total flux cleaned = 0.110302 Jy ! Component: 3800 - total flux cleaned = 0.110907 Jy ! Component: 3850 - total flux cleaned = 0.110707 Jy ! Component: 3900 - total flux cleaned = 0.111902 Jy ! Component: 3950 - total flux cleaned = 0.113686 Jy ! Component: 4000 - total flux cleaned = 0.113487 Jy ! Component: 4050 - total flux cleaned = 0.114859 Jy ! Total flux subtracted in 4096 components = 0.115054 Jy ! Clean residual min=-0.009906 max=0.010364 Jy/beam ! Clean residual mean=-0.000175 rms=0.003947 Jy/beam ! Combined flux in latest and established models = 0.6055 Jy keep ! Adding 352 model components to the UV plane model. ! The established model now contains 465 components and 0.605501 Jy ![Exited script file: muppet] wmap "J1634+6245_S_2017_08_12_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 4.523 x 5.795 at 6.436 degrees (North through East) ! Clean map min=-0.024846 max=0.18376 Jy/beam ! Writing clean map to FITS file: J1634+6245_S_2017_08_12_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.183757 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.00390904 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -6.38187 6.38187 12.7637 25.5275 51.055 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0117 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.183 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 4.523 x 5.795 at 6.436 degrees (North through East) ! Clean map min=-0.024846 max=0.18376 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J1634+6245_S_2017_08_12_pus_uvs.log closed on Fri May 10 15:03:24 2019