! Started logfile: J1634+3203_S_2017_01_21_pus_uvs.log on Sun May 5 15:58:48 2019 obs J1634+3203_S_2017_01_21_pus_uva.fits ! Reading UV FITS file: J1634+3203_S_2017_01_21_pus_uva.fits ! AN table 1: 83 integrations on 36 of 36 possible baselines. ! Apparent sampling: 0.538822 visibilities/baseline/integration-bin. ! Found source: J1634+3203 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 558 lines of history. ! ! Reading 6440 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J1634+3203_S_2017_01_21_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 192 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 192 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 192 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 378 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.866050Jy sigma=0.007299 ! Fit after self-cal, rms=0.858111Jy sigma=0.007243 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.551 mas, bmaj=5.146 mas, bpa=-3.965 degrees ! Estimated noise=1601.88 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.115024 Jy ! Component: 100 - total flux cleaned = 0.140649 Jy ! Total flux subtracted in 100 components = 0.140649 Jy ! Clean residual min=-0.006414 max=0.008729 Jy/beam ! Clean residual mean=0.000003 rms=0.001619 Jy/beam ! Combined flux in latest and established models = 0.140649 Jy ! Performing phase self-cal ! Adding 4 model components to the UV plane model. ! The established model now contains 4 components and 0.140649 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.088434Jy sigma=0.000655 ! Fit after self-cal, rms=0.088429Jy sigma=0.000655 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.944 mas, bmaj=5.707 mas, bpa=-4.064 degrees ! Estimated noise=1152.27 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0088386 Jy ! Component: 100 - total flux cleaned = 0.00998483 Jy ! Component: 150 - total flux cleaned = 0.00977296 Jy ! Component: 200 - total flux cleaned = 0.0095277 Jy ! Total flux subtracted in 200 components = 0.0095277 Jy ! Clean residual min=-0.003607 max=0.003683 Jy/beam ! Clean residual mean=0.000001 rms=0.000903 Jy/beam ! Combined flux in latest and established models = 0.150176 Jy ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 17 components and 0.150177 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.087695Jy sigma=0.000646 ! Fit after self-cal, rms=0.087697Jy sigma=0.000646 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.01 FD 1.00* HN 0.94 LA 1.04 ! MK 0.93 NL 1.01 OV 1.63 PT 0.97 ! SC 0.93 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 0.98 FD 1.00* HN 1.01 LA 0.97 ! MK 0.95 NL 1.00 OV 1.70 PT 0.96 ! SC 1.03 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 1.01 FD 1.00* HN 0.96 LA 1.03 ! MK 1.01 NL 1.02 OV 1.38 PT 0.98 ! SC 0.99 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 1.01 FD 1.00* HN 0.97 LA 1.03 ! MK 1.13 NL 1.00* OV 1.00* PT 1.00 ! SC 1.00* ! ! ! Fit before self-cal, rms=0.087697Jy sigma=0.000646 ! Fit after self-cal, rms=0.097450Jy sigma=0.000641 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.922 mas, bmaj=5.682 mas, bpa=-3.893 degrees ! Estimated noise=1143.56 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00120355 Jy ! Component: 100 - total flux cleaned = 0.00148541 Jy ! Component: 150 - total flux cleaned = 0.001537 Jy ! Component: 200 - total flux cleaned = 0.00158339 Jy ! Total flux subtracted in 200 components = 0.00158339 Jy ! Clean residual min=-0.002869 max=0.003115 Jy/beam ! Clean residual mean=-0.000000 rms=0.000708 Jy/beam ! Combined flux in latest and established models = 0.15176 Jy ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 29 components and 0.15176 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.097421Jy sigma=0.000640 ! Fit after self-cal, rms=0.097618Jy sigma=0.000640 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.097618Jy sigma=0.000640 ! Fit after self-cal, rms=0.098834Jy sigma=0.000638 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.918 mas, bmaj=5.685 mas, bpa=-3.944 degrees ! Estimated noise=1146.9 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000703856 Jy ! Component: 100 - total flux cleaned = 0.000868728 Jy ! Component: 150 - total flux cleaned = 0.00097678 Jy ! Component: 200 - total flux cleaned = 0.00100978 Jy ! Total flux subtracted in 200 components = 0.00100978 Jy ! Clean residual min=-0.002465 max=0.002703 Jy/beam ! Clean residual mean=-0.000002 rms=0.000636 Jy/beam ! Combined flux in latest and established models = 0.15277 Jy selfcal ! Performing phase self-cal ! Adding 8 model components to the UV plane model. ! The established model now contains 34 components and 0.15277 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.098821Jy sigma=0.000638 ! Fit after self-cal, rms=0.098872Jy sigma=0.000638 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-122, -57.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00199445 Jy ! Component: 100 - total flux cleaned = 0.00211785 Jy ! Component: 150 - total flux cleaned = 0.00212118 Jy ! Component: 200 - total flux cleaned = 0.00208564 Jy ! Total flux subtracted in 200 components = 0.00208564 Jy ! Clean residual min=-0.002232 max=0.002400 Jy/beam ! Clean residual mean=-0.000004 rms=0.000600 Jy/beam ! Combined flux in latest and established models = 0.154855 Jy ! Performing phase self-cal ! Adding 24 model components to the UV plane model. ! The established model now contains 57 components and 0.154855 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.098782Jy sigma=0.000637 ! Fit after self-cal, rms=0.098779Jy sigma=0.000637 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.098779Jy sigma=0.000637 ! Fit after self-cal, rms=0.098683Jy sigma=0.000637 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.916 mas, bmaj=5.676 mas, bpa=-4.017 degrees ! Estimated noise=1145.98 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000585145 Jy ! Component: 100 - total flux cleaned = 0.000586383 Jy ! Component: 150 - total flux cleaned = 0.000686851 Jy ! Component: 200 - total flux cleaned = 0.00074654 Jy ! Total flux subtracted in 200 components = 0.00074654 Jy ! Clean residual min=-0.002168 max=0.002373 Jy/beam ! Clean residual mean=-0.000003 rms=0.000582 Jy/beam ! Combined flux in latest and established models = 0.155602 Jy selfcal ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 59 components and 0.155602 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.098646Jy sigma=0.000637 ! Fit after self-cal, rms=0.098650Jy sigma=0.000637 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 3.14207e-05 Jy ! Component: 100 - total flux cleaned = 0.000115393 Jy ! Component: 150 - total flux cleaned = 0.0001405 Jy ! Component: 200 - total flux cleaned = 0.000188783 Jy ! Total flux subtracted in 200 components = 0.000188783 Jy ! Clean residual min=-0.002097 max=0.002377 Jy/beam ! Clean residual mean=-0.000003 rms=0.000576 Jy/beam ! Combined flux in latest and established models = 0.155791 Jy ! Performing phase self-cal ! Adding 22 model components to the UV plane model. ! The established model now contains 64 components and 0.155791 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.098629Jy sigma=0.000637 ! Fit after self-cal, rms=0.098629Jy sigma=0.000637 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.098629Jy sigma=0.000637 ! Fit after self-cal, rms=0.098593Jy sigma=0.000637 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=6.298 mas, bmaj=8.844 mas, bpa=5.781 degrees ! Estimated noise=1552.68 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000382372 Jy ! Component: 100 - total flux cleaned = 0.00031617 Jy ! Component: 150 - total flux cleaned = 0.00028607 Jy ! Component: 200 - total flux cleaned = 0.000258507 Jy ! Total flux subtracted in 200 components = 0.000258507 Jy ! Clean residual min=-0.002445 max=0.002667 Jy/beam ! Clean residual mean=-0.000009 rms=0.000705 Jy/beam ! Combined flux in latest and established models = 0.156049 Jy selfcal ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 76 components and 0.156049 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.098581Jy sigma=0.000637 ! Fit after self-cal, rms=0.098577Jy sigma=0.000637 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -5.56894e-05 Jy ! Component: 100 - total flux cleaned = -0.000106385 Jy ! Component: 150 - total flux cleaned = -0.000127633 Jy ! Component: 200 - total flux cleaned = -0.000146548 Jy ! Total flux subtracted in 200 components = -0.000146548 Jy ! Clean residual min=-0.002347 max=0.002658 Jy/beam ! Clean residual mean=-0.000009 rms=0.000700 Jy/beam ! Combined flux in latest and established models = 0.155903 Jy ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 81 components and 0.155903 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.098574Jy sigma=0.000637 ! Fit after self-cal, rms=0.098571Jy sigma=0.000637 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=2.916 mas, bmaj=5.672 mas, bpa=-4.025 degrees ! Estimated noise=1145.8 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.916 x 5.672 at -4.025 degrees (North through East) ! Clean map min=-0.0020782 max=0.14717 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.524 mas, bmaj=5.115 mas, bpa=-3.859 degrees ! Estimated noise=1594.49 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.114361 Jy ! Component: 100 - total flux cleaned = 0.140289 Jy ! Component: 150 - total flux cleaned = 0.149549 Jy ! Component: 200 - total flux cleaned = 0.152448 Jy ! Total flux subtracted in 200 components = 0.152448 Jy ! Clean residual min=-0.004247 max=0.004254 Jy/beam ! Clean residual mean=-0.000001 rms=0.001131 Jy/beam ! Combined flux in latest and established models = 0.152448 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 12 model components to the UV plane model. ! The established model now contains 12 components and 0.152448 Jy ! Inverting map and beam ! Estimated beam: bmin=2.916 mas, bmaj=5.672 mas, bpa=-4.025 degrees ! Estimated noise=1145.8 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00128499 Jy ! Component: 100 - total flux cleaned = 0.00201145 Jy ! Component: 150 - total flux cleaned = 0.00250548 Jy ! Component: 200 - total flux cleaned = 0.00292154 Jy ! Total flux subtracted in 200 components = 0.00292154 Jy ! Clean residual min=-0.002389 max=0.002475 Jy/beam ! Clean residual mean=-0.000003 rms=0.000613 Jy/beam ! Combined flux in latest and established models = 0.15537 Jy ! Adding 24 model components to the UV plane model. ! The established model now contains 35 components and 0.15537 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=6.298 mas, bmaj=8.844 mas, bpa=5.781 degrees ! Estimated noise=1552.68 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000401722 Jy ! Component: 100 - total flux cleaned = 0.000542698 Jy ! Component: 150 - total flux cleaned = 0.000618491 Jy ! Component: 200 - total flux cleaned = 0.000551862 Jy ! Total flux subtracted in 200 components = 0.000551862 Jy ! Clean residual min=-0.002617 max=0.002653 Jy/beam ! Clean residual mean=-0.000009 rms=0.000721 Jy/beam ! Combined flux in latest and established models = 0.155922 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -3.04335e-05 Jy ! Component: 100 - total flux cleaned = -5.71563e-05 Jy ! Component: 150 - total flux cleaned = -5.64771e-05 Jy ! Component: 200 - total flux cleaned = -5.66493e-05 Jy ! Total flux subtracted in 200 components = -5.66493e-05 Jy ! Clean residual min=-0.002439 max=0.002651 Jy/beam ! Clean residual mean=-0.000010 rms=0.000709 Jy/beam ! Combined flux in latest and established models = 0.155865 Jy ! Adding 35 model components to the UV plane model. ! The established model now contains 65 components and 0.155865 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=2.916 mas, bmaj=5.672 mas, bpa=-4.025 degrees ! Estimated noise=1145.8 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000175518 Jy ! Component: 100 - total flux cleaned = 0.000396464 Jy ! Component: 150 - total flux cleaned = 0.000436079 Jy ! Component: 200 - total flux cleaned = 0.000472026 Jy ! Total flux subtracted in 200 components = 0.000472026 Jy ! Clean residual min=-0.002233 max=0.002518 Jy/beam ! Clean residual mean=-0.000004 rms=0.000582 Jy/beam ! Combined flux in latest and established models = 0.156337 Jy selfcal ! Performing phase self-cal ! Adding 24 model components to the UV plane model. ! The established model now contains 87 components and 0.156337 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.098596Jy sigma=0.000637 ! Fit after self-cal, rms=0.098595Jy sigma=0.000637 wmodel J1634+3203_S_2017_01_21_pus_map.mod ! Writing 87 model components to file: J1634+3203_S_2017_01_21_pus_map.mod wobs J1634+3203_S_2017_01_21_pus_uvs.fits ! Writing UV FITS file: J1634+3203_S_2017_01_21_pus_uvs.fits wwins J1634+3203_S_2017_01_21_pus_map.win ! wwins: Wrote 2 windows to J1634+3203_S_2017_01_21_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.000728632 Jy ! Component: 100 - total flux cleaned = 0.00085313 Jy ! Component: 150 - total flux cleaned = 0.000893449 Jy ! Component: 200 - total flux cleaned = 0.00082045 Jy ! Component: 250 - total flux cleaned = 0.000573815 Jy ! Component: 300 - total flux cleaned = 0.00053988 Jy ! Component: 350 - total flux cleaned = 0.000372359 Jy ! Component: 400 - total flux cleaned = 0.000275303 Jy ! Component: 450 - total flux cleaned = 0.000149518 Jy ! Component: 500 - total flux cleaned = 2.66703e-05 Jy ! Component: 550 - total flux cleaned = -6.32321e-05 Jy ! Component: 600 - total flux cleaned = -9.24705e-05 Jy ! Component: 650 - total flux cleaned = -6.63465e-06 Jy ! Component: 700 - total flux cleaned = 2.21353e-05 Jy ! Component: 750 - total flux cleaned = 0.000132038 Jy ! Component: 800 - total flux cleaned = 0.000158797 Jy ! Component: 850 - total flux cleaned = 0.000211751 Jy ! Component: 900 - total flux cleaned = 0.000315675 Jy ! Component: 950 - total flux cleaned = 0.000366712 Jy ! Component: 1000 - total flux cleaned = 0.000441782 Jy ! Component: 1050 - total flux cleaned = 0.000491032 Jy ! Component: 1100 - total flux cleaned = 0.000587681 Jy ! Component: 1150 - total flux cleaned = 0.000611485 Jy ! Component: 1200 - total flux cleaned = 0.000611515 Jy ! Component: 1250 - total flux cleaned = 0.000634823 Jy ! Component: 1300 - total flux cleaned = 0.000611839 Jy ! Component: 1350 - total flux cleaned = 0.000634638 Jy ! Component: 1400 - total flux cleaned = 0.000634816 Jy ! Component: 1450 - total flux cleaned = 0.000678864 Jy ! Component: 1500 - total flux cleaned = 0.0007431 Jy ! Component: 1550 - total flux cleaned = 0.000678686 Jy ! Component: 1600 - total flux cleaned = 0.000741982 Jy ! Component: 1650 - total flux cleaned = 0.000721001 Jy ! Component: 1700 - total flux cleaned = 0.000762298 Jy ! Component: 1750 - total flux cleaned = 0.000762628 Jy ! Component: 1800 - total flux cleaned = 0.000762463 Jy ! Component: 1850 - total flux cleaned = 0.00074235 Jy ! Component: 1900 - total flux cleaned = 0.000742452 Jy ! Component: 1950 - total flux cleaned = 0.000684041 Jy ! Component: 2000 - total flux cleaned = 0.000741782 Jy ! Component: 2050 - total flux cleaned = 0.000760553 Jy ! Component: 2100 - total flux cleaned = 0.000760514 Jy ! Component: 2150 - total flux cleaned = 0.000760578 Jy ! Component: 2200 - total flux cleaned = 0.000686569 Jy ! Component: 2250 - total flux cleaned = 0.000704776 Jy ! Component: 2300 - total flux cleaned = 0.000686795 Jy ! Component: 2350 - total flux cleaned = 0.000722733 Jy ! Component: 2400 - total flux cleaned = 0.000687669 Jy ! Component: 2450 - total flux cleaned = 0.000705331 Jy ! Component: 2500 - total flux cleaned = 0.000670782 Jy ! Component: 2550 - total flux cleaned = 0.000670729 Jy ! Component: 2600 - total flux cleaned = 0.000671127 Jy ! Component: 2650 - total flux cleaned = 0.00072166 Jy ! Component: 2700 - total flux cleaned = 0.000638109 Jy ! Component: 2750 - total flux cleaned = 0.000654596 Jy ! Component: 2800 - total flux cleaned = 0.00065465 Jy ! Component: 2850 - total flux cleaned = 0.000573107 Jy ! Component: 2900 - total flux cleaned = 0.000557067 Jy ! Component: 2950 - total flux cleaned = 0.000541082 Jy ! Component: 3000 - total flux cleaned = 0.000445657 Jy ! Component: 3050 - total flux cleaned = 0.000414014 Jy ! Component: 3100 - total flux cleaned = 0.000335768 Jy ! Component: 3150 - total flux cleaned = 0.000258257 Jy ! Component: 3200 - total flux cleaned = 0.000289365 Jy ! Component: 3250 - total flux cleaned = 0.000243376 Jy ! Component: 3300 - total flux cleaned = 0.000197736 Jy ! Component: 3350 - total flux cleaned = 0.000107109 Jy ! Component: 3400 - total flux cleaned = 9.22615e-05 Jy ! Component: 3450 - total flux cleaned = 9.22037e-05 Jy ! Component: 3500 - total flux cleaned = 6.2441e-05 Jy ! Component: 3550 - total flux cleaned = 1.8322e-05 Jy ! Component: 3600 - total flux cleaned = -1.09288e-05 Jy ! Component: 3650 - total flux cleaned = -5.44576e-05 Jy ! Component: 3700 - total flux cleaned = -2.57331e-05 Jy ! Component: 3750 - total flux cleaned = -8.32691e-05 Jy ! Component: 3800 - total flux cleaned = -9.77043e-05 Jy ! Component: 3850 - total flux cleaned = -0.000126181 Jy ! Component: 3900 - total flux cleaned = -0.000140282 Jy ! Component: 3950 - total flux cleaned = -0.000224552 Jy ! Component: 4000 - total flux cleaned = -0.000238434 Jy ! Component: 4050 - total flux cleaned = -0.000252291 Jy ! Total flux subtracted in 4096 components = -0.000252276 Jy ! Clean residual min=-0.000870 max=0.000792 Jy/beam ! Clean residual mean=-0.000001 rms=0.000247 Jy/beam ! Combined flux in latest and established models = 0.156085 Jy keep ! Adding 285 model components to the UV plane model. ! The established model now contains 372 components and 0.156085 Jy ![Exited script file: muppet] wmap "J1634+3203_S_2017_01_21_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.916 x 5.672 at -4.025 degrees (North through East) ! Clean map min=-0.0018547 max=0.14664 Jy/beam ! Writing clean map to FITS file: J1634+3203_S_2017_01_21_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.146644 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000246219 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.50371 0.50371 1.00742 2.01484 4.02968 8.05936 16.1187 32.2374 64.4749 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0007 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.146 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.916 x 5.672 at -4.025 degrees (North through East) ! Clean map min=-0.0018547 max=0.14664 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J1634+3203_S_2017_01_21_pus_uvs.log closed on Sun May 5 15:58:52 2019