! Started logfile: J1632-4558_S_2017_07_09_pus_uvs.log on Wed May 8 14:53:12 2019 obs J1632-4558_S_2017_07_09_pus_uva.fits ! Reading UV FITS file: J1632-4558_S_2017_07_09_pus_uva.fits ! AN table 1: 146 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.350837 visibilities/baseline/integration-bin. ! *** This seems a bit low - see "help observe" on the binwid argument. ! Found source: J1632-4558 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 594 lines of history. ! ! Reading 9220 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J1632-4558_S_2017_07_09_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 633 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 673 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 751 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 1172 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.911620Jy sigma=0.005172 ! Fit after self-cal, rms=0.869435Jy sigma=0.004929 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.335 mas, bmaj=8.429 mas, bpa=-8.334 degrees ! Estimated noise=2541.44 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.083568 Jy ! Component: 100 - total flux cleaned = 0.124842 Jy ! Total flux subtracted in 100 components = 0.124842 Jy ! Clean residual min=-0.015436 max=0.023641 Jy/beam ! Clean residual mean=-0.000533 rms=0.005393 Jy/beam ! Combined flux in latest and established models = 0.124842 Jy ! Performing phase self-cal ! Adding 46 model components to the UV plane model. ! The established model now contains 46 components and 0.124842 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.148529Jy sigma=0.000834 ! Fit after self-cal, rms=0.147993Jy sigma=0.000831 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.926 mas, bmaj=9.021 mas, bpa=-8.24 degrees ! Estimated noise=1553.11 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.056293 Jy ! Component: 100 - total flux cleaned = 0.0830177 Jy ! Component: 150 - total flux cleaned = 0.0960965 Jy ! Component: 200 - total flux cleaned = 0.1025 Jy ! Total flux subtracted in 200 components = 0.1025 Jy ! Clean residual min=-0.012501 max=0.026410 Jy/beam ! Clean residual mean=-0.000662 rms=0.005984 Jy/beam ! Combined flux in latest and established models = 0.227343 Jy ! Performing phase self-cal ! Adding 40 model components to the UV plane model. ! The established model now contains 77 components and 0.227343 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.128065Jy sigma=0.000710 ! Fit after self-cal, rms=0.127710Jy sigma=0.000708 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! A total of 21 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 0.98 HN 1.00* KP 1.03 ! LA 0.88 MK 1.01 NL 1.00* OV 1.67 ! PT 0.84 SC 1.08 ! ! ! Correcting IF 2. ! A total of 12 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.01 HN 1.00* KP 0.99 ! LA 0.83 MK 1.18 NL 1.00* OV 1.65 ! PT 0.82 SC 1.06 ! ! ! Correcting IF 3. ! A total of 33 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.01 HN 1.00* KP 1.03 ! LA 0.80 MK 1.01 NL 1.00* OV 1.50 ! PT 0.87 SC 0.98 ! ! ! Correcting IF 4. ! A total of 288 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.00* FD 0.00* HN 0.00* KP 0.00* ! LA 0.00* MK 0.00* NL 0.00* OV 0.00* ! PT 0.00* SC 0.00* ! ! ! Fit before self-cal, rms=0.127710Jy sigma=0.000708 ! Fit after self-cal, rms=0.145187Jy sigma=0.000673 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.991 mas, bmaj=9.147 mas, bpa=-7.31 degrees ! Estimated noise=1645.57 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00102748 Jy ! Component: 100 - total flux cleaned = 0.000842192 Jy ! Component: 150 - total flux cleaned = 0.00072966 Jy ! Component: 200 - total flux cleaned = 0.000729038 Jy ! Total flux subtracted in 200 components = 0.000729038 Jy ! Clean residual min=-0.008462 max=0.013213 Jy/beam ! Clean residual mean=0.000128 rms=0.003839 Jy/beam ! Combined flux in latest and established models = 0.228072 Jy ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 85 components and 0.228072 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.145160Jy sigma=0.000673 ! Fit after self-cal, rms=0.146375Jy sigma=0.000671 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.146375Jy sigma=0.000671 ! Fit after self-cal, rms=0.148649Jy sigma=0.000668 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.968 mas, bmaj=9.102 mas, bpa=-7.201 degrees ! Estimated noise=1635.48 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000750009 Jy ! Component: 100 - total flux cleaned = 0.000678739 Jy ! Component: 150 - total flux cleaned = 0.000709761 Jy ! Component: 200 - total flux cleaned = 0.00073812 Jy ! Total flux subtracted in 200 components = 0.00073812 Jy ! Clean residual min=-0.008046 max=0.013144 Jy/beam ! Clean residual mean=0.000180 rms=0.003800 Jy/beam ! Combined flux in latest and established models = 0.22881 Jy selfcal ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 91 components and 0.22881 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.148625Jy sigma=0.000668 ! Fit after self-cal, rms=0.148734Jy sigma=0.000668 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 2.79962e-05 Jy ! Component: 100 - total flux cleaned = 5.96699e-05 Jy ! Component: 150 - total flux cleaned = 6.09566e-05 Jy ! Component: 200 - total flux cleaned = 8.92253e-05 Jy ! Total flux subtracted in 200 components = 8.92253e-05 Jy ! Clean residual min=-0.007982 max=0.013037 Jy/beam ! Clean residual mean=0.000179 rms=0.003798 Jy/beam ! Combined flux in latest and established models = 0.228899 Jy ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 93 components and 0.228899 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.148721Jy sigma=0.000668 ! Fit after self-cal, rms=0.148735Jy sigma=0.000668 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.148735Jy sigma=0.000668 ! Fit after self-cal, rms=0.148052Jy sigma=0.000668 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.945 mas, bmaj=9.043 mas, bpa=-7.085 degrees ! Estimated noise=1623.19 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000483032 Jy ! Component: 100 - total flux cleaned = 0.000539345 Jy ! Component: 150 - total flux cleaned = 0.000613811 Jy ! Component: 200 - total flux cleaned = 0.000659461 Jy ! Total flux subtracted in 200 components = 0.000659461 Jy ! Clean residual min=-0.007886 max=0.012893 Jy/beam ! Clean residual mean=0.000182 rms=0.003769 Jy/beam ! Combined flux in latest and established models = 0.229558 Jy selfcal ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 97 components and 0.229558 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.148035Jy sigma=0.000668 ! Fit after self-cal, rms=0.148037Jy sigma=0.000668 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 6.8967e-05 Jy ! Component: 100 - total flux cleaned = 9.24311e-05 Jy ! Component: 150 - total flux cleaned = 0.000114724 Jy ! Component: 200 - total flux cleaned = 0.000134799 Jy ! Total flux subtracted in 200 components = 0.000134799 Jy ! Clean residual min=-0.007906 max=0.012902 Jy/beam ! Clean residual mean=0.000183 rms=0.003769 Jy/beam ! Combined flux in latest and established models = 0.229693 Jy ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 98 components and 0.229693 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.148029Jy sigma=0.000668 ! Fit after self-cal, rms=0.148027Jy sigma=0.000668 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.148027Jy sigma=0.000668 ! Fit after self-cal, rms=0.147444Jy sigma=0.000668 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=11.11 mas, bmaj=33.48 mas, bpa=-0.4607 degrees ! Estimated noise=2125.56 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00230494 Jy ! Component: 100 - total flux cleaned = 0.00230888 Jy ! Component: 150 - total flux cleaned = 0.0023581 Jy ! Component: 200 - total flux cleaned = 0.00240484 Jy ! Total flux subtracted in 200 components = 0.00240484 Jy ! Clean residual min=-0.012301 max=0.021418 Jy/beam ! Clean residual mean=0.000366 rms=0.006600 Jy/beam ! Combined flux in latest and established models = 0.232098 Jy selfcal ! Performing phase self-cal ! Adding 3 model components to the UV plane model. ! The established model now contains 98 components and 0.232098 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.147425Jy sigma=0.000668 ! Fit after self-cal, rms=0.147413Jy sigma=0.000668 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 2.58116e-07 Jy ! Component: 100 - total flux cleaned = 4.69137e-05 Jy ! Component: 150 - total flux cleaned = 5.00107e-05 Jy ! Component: 200 - total flux cleaned = 9.63829e-05 Jy ! Total flux subtracted in 200 components = 9.63829e-05 Jy ! Clean residual min=-0.012287 max=0.021414 Jy/beam ! Clean residual mean=0.000367 rms=0.006592 Jy/beam ! Combined flux in latest and established models = 0.232194 Jy ! Performing phase self-cal ! Adding 3 model components to the UV plane model. ! The established model now contains 98 components and 0.232194 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.147411Jy sigma=0.000668 ! Fit after self-cal, rms=0.147402Jy sigma=0.000668 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=2.929 mas, bmaj=9.013 mas, bpa=-6.98 degrees ! Estimated noise=1614.18 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.929 x 9.013 at -6.98 degrees (North through East) ! Clean map min=-0.0082055 max=0.08809 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.288 mas, bmaj=8.25 mas, bpa=-7.829 degrees ! Estimated noise=2713.22 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0842716 Jy ! Component: 100 - total flux cleaned = 0.129694 Jy ! Component: 150 - total flux cleaned = 0.159308 Jy ! Component: 200 - total flux cleaned = 0.178736 Jy ! Total flux subtracted in 200 components = 0.178736 Jy ! Clean residual min=-0.010627 max=0.011836 Jy/beam ! Clean residual mean=-0.000088 rms=0.003113 Jy/beam ! Combined flux in latest and established models = 0.178736 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 61 model components to the UV plane model. ! The established model now contains 61 components and 0.178736 Jy ! Inverting map and beam ! Estimated beam: bmin=2.929 mas, bmaj=9.013 mas, bpa=-6.98 degrees ! Estimated noise=1614.18 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0271266 Jy ! Component: 100 - total flux cleaned = 0.0397063 Jy ! Component: 150 - total flux cleaned = 0.0457266 Jy ! Component: 200 - total flux cleaned = 0.0486273 Jy ! Total flux subtracted in 200 components = 0.0486273 Jy ! Clean residual min=-0.007973 max=0.013010 Jy/beam ! Clean residual mean=0.000157 rms=0.003732 Jy/beam ! Combined flux in latest and established models = 0.227364 Jy ! Adding 45 model components to the UV plane model. ! The established model now contains 98 components and 0.227364 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=11.11 mas, bmaj=33.48 mas, bpa=-0.4607 degrees ! Estimated noise=2125.56 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00351899 Jy ! Component: 100 - total flux cleaned = 0.0039393 Jy ! Component: 150 - total flux cleaned = 0.0039411 Jy ! Component: 200 - total flux cleaned = 0.0039858 Jy ! Total flux subtracted in 200 components = 0.0039858 Jy ! Clean residual min=-0.012536 max=0.021525 Jy/beam ! Clean residual mean=0.000355 rms=0.006583 Jy/beam ! Combined flux in latest and established models = 0.23135 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 2.30055e-06 Jy ! Component: 100 - total flux cleaned = 4.64759e-05 Jy ! Component: 150 - total flux cleaned = 4.91445e-05 Jy ! Component: 200 - total flux cleaned = 9.31263e-05 Jy ! Total flux subtracted in 200 components = 9.31263e-05 Jy ! Clean residual min=-0.012527 max=0.021512 Jy/beam ! Clean residual mean=0.000356 rms=0.006575 Jy/beam ! Combined flux in latest and established models = 0.231443 Jy ! Adding 3 model components to the UV plane model. ! The established model now contains 98 components and 0.231443 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=2.929 mas, bmaj=9.013 mas, bpa=-6.98 degrees ! Estimated noise=1614.18 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00149341 Jy ! Component: 100 - total flux cleaned = -0.00159965 Jy ! Component: 150 - total flux cleaned = -0.00163671 Jy ! Component: 200 - total flux cleaned = -0.00163592 Jy ! Total flux subtracted in 200 components = -0.00163592 Jy ! Clean residual min=-0.008199 max=0.013181 Jy/beam ! Clean residual mean=0.000179 rms=0.003736 Jy/beam ! Combined flux in latest and established models = 0.229807 Jy selfcal ! Performing phase self-cal ! Adding 23 model components to the UV plane model. ! The established model now contains 110 components and 0.229807 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.147447Jy sigma=0.000668 ! Fit after self-cal, rms=0.147448Jy sigma=0.000668 wmodel J1632-4558_S_2017_07_09_pus_map.mod ! Writing 110 model components to file: J1632-4558_S_2017_07_09_pus_map.mod wobs J1632-4558_S_2017_07_09_pus_uvs.fits ! Writing UV FITS file: J1632-4558_S_2017_07_09_pus_uvs.fits wwins J1632-4558_S_2017_07_09_pus_map.win ! wwins: Wrote 1 windows to J1632-4558_S_2017_07_09_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.0056069 Jy ! Component: 100 - total flux cleaned = 0.0103436 Jy ! Component: 150 - total flux cleaned = 0.0146185 Jy ! Component: 200 - total flux cleaned = 0.018559 Jy ! Component: 250 - total flux cleaned = 0.0222145 Jy ! Component: 300 - total flux cleaned = 0.025632 Jy ! Component: 350 - total flux cleaned = 0.0280823 Jy ! Component: 400 - total flux cleaned = 0.0296792 Jy ! Component: 450 - total flux cleaned = 0.0306212 Jy ! Component: 500 - total flux cleaned = 0.0315276 Jy ! Component: 550 - total flux cleaned = 0.0324009 Jy ! Component: 600 - total flux cleaned = 0.0329247 Jy ! Component: 650 - total flux cleaned = 0.0334338 Jy ! Component: 700 - total flux cleaned = 0.0340285 Jy ! Component: 750 - total flux cleaned = 0.0343175 Jy ! Component: 800 - total flux cleaned = 0.0345986 Jy ! Component: 850 - total flux cleaned = 0.0347819 Jy ! Component: 900 - total flux cleaned = 0.034872 Jy ! Component: 950 - total flux cleaned = 0.0350462 Jy ! Component: 1000 - total flux cleaned = 0.0351317 Jy ! Component: 1050 - total flux cleaned = 0.0352974 Jy ! Component: 1100 - total flux cleaned = 0.0353777 Jy ! Component: 1150 - total flux cleaned = 0.0351402 Jy ! Component: 1200 - total flux cleaned = 0.0350627 Jy ! Component: 1250 - total flux cleaned = 0.0350626 Jy ! Component: 1300 - total flux cleaned = 0.0352112 Jy ! Component: 1350 - total flux cleaned = 0.0350646 Jy ! Component: 1400 - total flux cleaned = 0.0350644 Jy ! Component: 1450 - total flux cleaned = 0.034994 Jy ! Component: 1500 - total flux cleaned = 0.0349936 Jy ! Component: 1550 - total flux cleaned = 0.0349941 Jy ! Component: 1600 - total flux cleaned = 0.0352664 Jy ! Component: 1650 - total flux cleaned = 0.0353995 Jy ! Component: 1700 - total flux cleaned = 0.0354658 Jy ! Component: 1750 - total flux cleaned = 0.0355956 Jy ! Component: 1800 - total flux cleaned = 0.0353355 Jy ! Component: 1850 - total flux cleaned = 0.0351433 Jy ! Component: 1900 - total flux cleaned = 0.035144 Jy ! Component: 1950 - total flux cleaned = 0.0348923 Jy ! Component: 2000 - total flux cleaned = 0.034706 Jy ! Component: 2050 - total flux cleaned = 0.034706 Jy ! Component: 2100 - total flux cleaned = 0.0343398 Jy ! Component: 2150 - total flux cleaned = 0.0340983 Jy ! Component: 2200 - total flux cleaned = 0.0339183 Jy ! Component: 2250 - total flux cleaned = 0.0337395 Jy ! Component: 2300 - total flux cleaned = 0.0334441 Jy ! Component: 2350 - total flux cleaned = 0.0331505 Jy ! Component: 2400 - total flux cleaned = 0.0328597 Jy ! Component: 2450 - total flux cleaned = 0.0326864 Jy ! Component: 2500 - total flux cleaned = 0.032342 Jy ! Component: 2550 - total flux cleaned = 0.0319992 Jy ! Component: 2600 - total flux cleaned = 0.0317725 Jy ! Component: 2650 - total flux cleaned = 0.0313778 Jy ! Component: 2700 - total flux cleaned = 0.0310417 Jy ! Component: 2750 - total flux cleaned = 0.0307076 Jy ! Component: 2800 - total flux cleaned = 0.0303751 Jy ! Component: 2850 - total flux cleaned = 0.0300441 Jy ! Component: 2900 - total flux cleaned = 0.0296596 Jy ! Component: 2950 - total flux cleaned = 0.0293866 Jy ! Component: 3000 - total flux cleaned = 0.0288966 Jy ! Component: 3050 - total flux cleaned = 0.0285172 Jy ! Component: 3100 - total flux cleaned = 0.0281388 Jy ! Component: 3150 - total flux cleaned = 0.0276 Jy ! Component: 3200 - total flux cleaned = 0.0270092 Jy ! Component: 3250 - total flux cleaned = 0.0266342 Jy ! Component: 3300 - total flux cleaned = 0.0262065 Jy ! Component: 3350 - total flux cleaned = 0.0256202 Jy ! Component: 3400 - total flux cleaned = 0.0250888 Jy ! Component: 3450 - total flux cleaned = 0.0245585 Jy ! Component: 3500 - total flux cleaned = 0.024029 Jy ! Component: 3550 - total flux cleaned = 0.0237646 Jy ! Component: 3600 - total flux cleaned = 0.0232366 Jy ! Component: 3650 - total flux cleaned = 0.0228669 Jy ! Component: 3700 - total flux cleaned = 0.0224449 Jy ! Component: 3750 - total flux cleaned = 0.0221812 Jy ! Component: 3800 - total flux cleaned = 0.022128 Jy ! Component: 3850 - total flux cleaned = 0.0218639 Jy ! Component: 3900 - total flux cleaned = 0.0216524 Jy ! Component: 3950 - total flux cleaned = 0.0214938 Jy ! Component: 4000 - total flux cleaned = 0.0212291 Jy ! Component: 4050 - total flux cleaned = 0.0211229 Jy ! Total flux subtracted in 4096 components = 0.0209637 Jy ! Clean residual min=-0.004128 max=0.002857 Jy/beam ! Clean residual mean=0.000040 rms=0.001247 Jy/beam ! Combined flux in latest and established models = 0.250771 Jy keep ! Adding 545 model components to the UV plane model. ! The established model now contains 655 components and 0.250771 Jy ![Exited script file: muppet] wmap "J1632-4558_S_2017_07_09_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.929 x 9.013 at -6.98 degrees (North through East) ! Clean map min=-0.0069985 max=0.094082 Jy/beam ! Writing clean map to FITS file: J1632-4558_S_2017_07_09_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.0940815 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.00117005 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -3.73098 3.73098 7.46196 14.9239 29.8478 59.6957 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0035 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.094 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.929 x 9.013 at -6.98 degrees (North through East) ! Clean map min=-0.0069985 max=0.094082 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J1632-4558_S_2017_07_09_pus_uvs.log closed on Wed May 8 14:53:16 2019