! Started logfile: J1632-2258_S_2017_10_21_pus_uvs.log on Sat May 11 21:02:22 2019 obs J1632-2258_S_2017_10_21_pus_uva.fits ! Reading UV FITS file: J1632-2258_S_2017_10_21_pus_uva.fits ! AN table 1: 73 integrations on 36 of 36 possible baselines. ! Apparent sampling: 0.764079 visibilities/baseline/integration-bin. ! Found source: J1632-2258 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 644 lines of history. ! ! Reading 8032 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J1632-2258_S_2017_10_21_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 79 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 79 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 79 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 326 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.942705Jy sigma=0.007492 ! Fit after self-cal, rms=0.922615Jy sigma=0.007355 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.489 mas, bmaj=19.34 mas, bpa=-19.28 degrees ! Estimated noise=1702.27 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0580402 Jy ! Component: 100 - total flux cleaned = 0.0753648 Jy ! Total flux subtracted in 100 components = 0.0753648 Jy ! Clean residual min=-0.006468 max=0.007796 Jy/beam ! Clean residual mean=-0.000013 rms=0.001995 Jy/beam ! Combined flux in latest and established models = 0.0753648 Jy ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 14 components and 0.0753648 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.098353Jy sigma=0.000716 ! Fit after self-cal, rms=0.098234Jy sigma=0.000715 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.169 mas, bmaj=20.55 mas, bpa=-18.74 degrees ! Estimated noise=1112.63 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0126539 Jy ! Component: 100 - total flux cleaned = 0.0192292 Jy ! Component: 150 - total flux cleaned = 0.0232502 Jy ! Component: 200 - total flux cleaned = 0.0260227 Jy ! Total flux subtracted in 200 components = 0.0260227 Jy ! Clean residual min=-0.005746 max=0.005383 Jy/beam ! Clean residual mean=-0.000036 rms=0.001478 Jy/beam ! Combined flux in latest and established models = 0.101387 Jy ! Performing phase self-cal ! Adding 63 model components to the UV plane model. ! The established model now contains 73 components and 0.101387 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.096517Jy sigma=0.000702 ! Fit after self-cal, rms=0.096576Jy sigma=0.000701 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 0.96 HN 1.03 KP 1.17 ! LA 0.99 MK 1.04 NL 0.94 OV 0.96 ! PT 0.96 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.02 HN 1.10 KP 1.10 ! LA 0.98 MK 1.04 NL 1.03 OV 1.10 ! PT 0.85 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.04 HN 1.06 KP 1.09 ! LA 0.78 MK 1.08 NL 1.19 OV 0.89 ! PT 0.88 ! ! ! Correcting IF 4. ! A total of 6 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 0.92 HN 0.88 KP 1.00* ! LA 0.88 MK 0.79 NL 1.00* OV 1.00* ! PT 0.91 ! ! ! Fit before self-cal, rms=0.096576Jy sigma=0.000701 ! Fit after self-cal, rms=0.092548Jy sigma=0.000695 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.206 mas, bmaj=20.64 mas, bpa=-18.73 degrees ! Estimated noise=1104.2 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000438466 Jy ! Component: 100 - total flux cleaned = 0.000437155 Jy ! Component: 150 - total flux cleaned = 0.000393633 Jy ! Component: 200 - total flux cleaned = 0.00035604 Jy ! Total flux subtracted in 200 components = 0.00035604 Jy ! Clean residual min=-0.003063 max=0.003214 Jy/beam ! Clean residual mean=-0.000004 rms=0.000778 Jy/beam ! Combined flux in latest and established models = 0.101744 Jy ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 92 components and 0.101744 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.092482Jy sigma=0.000695 ! Fit after self-cal, rms=0.092576Jy sigma=0.000694 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.092576Jy sigma=0.000694 ! Fit after self-cal, rms=0.092996Jy sigma=0.000694 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.214 mas, bmaj=20.66 mas, bpa=-18.73 degrees ! Estimated noise=1106.04 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 5.22483e-05 Jy ! Component: 100 - total flux cleaned = 5.11495e-05 Jy ! Component: 150 - total flux cleaned = 5.13282e-05 Jy ! Component: 200 - total flux cleaned = -1.06736e-05 Jy ! Total flux subtracted in 200 components = -1.06736e-05 Jy ! Clean residual min=-0.002940 max=0.002998 Jy/beam ! Clean residual mean=-0.000003 rms=0.000741 Jy/beam ! Combined flux in latest and established models = 0.101733 Jy selfcal ! Performing phase self-cal ! Adding 27 model components to the UV plane model. ! The established model now contains 103 components and 0.101733 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.092960Jy sigma=0.000694 ! Fit after self-cal, rms=0.092993Jy sigma=0.000694 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 8.7387e-05 Jy ! Component: 100 - total flux cleaned = 5.80951e-05 Jy ! Component: 150 - total flux cleaned = 3.14751e-05 Jy ! Component: 200 - total flux cleaned = -1.97964e-05 Jy ! Total flux subtracted in 200 components = -1.97964e-05 Jy ! Clean residual min=-0.002831 max=0.002914 Jy/beam ! Clean residual mean=-0.000003 rms=0.000725 Jy/beam ! Combined flux in latest and established models = 0.101713 Jy ! Performing phase self-cal ! Adding 28 model components to the UV plane model. ! The established model now contains 111 components and 0.101713 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.092971Jy sigma=0.000694 ! Fit after self-cal, rms=0.092972Jy sigma=0.000694 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.092972Jy sigma=0.000694 ! Fit after self-cal, rms=0.093088Jy sigma=0.000694 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.216 mas, bmaj=20.68 mas, bpa=-18.75 degrees ! Estimated noise=1105.61 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -5.33374e-05 Jy ! Component: 100 - total flux cleaned = -0.000132912 Jy ! Component: 150 - total flux cleaned = -0.000157102 Jy ! Component: 200 - total flux cleaned = -0.000202226 Jy ! Total flux subtracted in 200 components = -0.000202226 Jy ! Clean residual min=-0.002754 max=0.002807 Jy/beam ! Clean residual mean=-0.000002 rms=0.000712 Jy/beam ! Combined flux in latest and established models = 0.101511 Jy selfcal ! Performing phase self-cal ! Adding 27 model components to the UV plane model. ! The established model now contains 118 components and 0.101511 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.093073Jy sigma=0.000694 ! Fit after self-cal, rms=0.093071Jy sigma=0.000694 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -2.40211e-05 Jy ! Component: 100 - total flux cleaned = -2.35176e-05 Jy ! Component: 150 - total flux cleaned = -6.49296e-05 Jy ! Component: 200 - total flux cleaned = -0.000104502 Jy ! Total flux subtracted in 200 components = -0.000104502 Jy ! Clean residual min=-0.002696 max=0.002767 Jy/beam ! Clean residual mean=-0.000002 rms=0.000704 Jy/beam ! Combined flux in latest and established models = 0.101406 Jy ! Performing phase self-cal ! Adding 25 model components to the UV plane model. ! The established model now contains 124 components and 0.101406 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.093059Jy sigma=0.000694 ! Fit after self-cal, rms=0.093046Jy sigma=0.000694 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.093046Jy sigma=0.000694 ! Fit after self-cal, rms=0.092945Jy sigma=0.000694 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.777 mas, bmaj=32.67 mas, bpa=-8.648 degrees ! Estimated noise=1304.52 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000392721 Jy ! Component: 100 - total flux cleaned = 0.00030272 Jy ! Component: 150 - total flux cleaned = 0.000227113 Jy ! Component: 200 - total flux cleaned = 0.000161034 Jy ! Total flux subtracted in 200 components = 0.000161034 Jy ! Clean residual min=-0.002992 max=0.002690 Jy/beam ! Clean residual mean=-0.000004 rms=0.000980 Jy/beam ! Combined flux in latest and established models = 0.101567 Jy selfcal ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 134 components and 0.101567 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.092941Jy sigma=0.000694 ! Fit after self-cal, rms=0.092941Jy sigma=0.000694 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 3.10995e-05 Jy ! Component: 100 - total flux cleaned = -3.64109e-05 Jy ! Component: 150 - total flux cleaned = -9.63216e-05 Jy ! Component: 200 - total flux cleaned = -0.000139344 Jy ! Total flux subtracted in 200 components = -0.000139344 Jy ! Clean residual min=-0.002967 max=0.002642 Jy/beam ! Clean residual mean=-0.000004 rms=0.000972 Jy/beam ! Combined flux in latest and established models = 0.101428 Jy ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 138 components and 0.101428 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.092939Jy sigma=0.000694 ! Fit after self-cal, rms=0.092939Jy sigma=0.000694 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.213 mas, bmaj=20.68 mas, bpa=-18.76 degrees ! Estimated noise=1104.22 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.213 x 20.68 at -18.76 degrees (North through East) ! Clean map min=-0.0024857 max=0.077359 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.488 mas, bmaj=19.36 mas, bpa=-19.21 degrees ! Estimated noise=1690.87 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0565336 Jy ! Component: 100 - total flux cleaned = 0.0753212 Jy ! Component: 150 - total flux cleaned = 0.0854336 Jy ! Component: 200 - total flux cleaned = 0.091251 Jy ! Total flux subtracted in 200 components = 0.091251 Jy ! Clean residual min=-0.004316 max=0.005263 Jy/beam ! Clean residual mean=-0.000001 rms=0.001269 Jy/beam ! Combined flux in latest and established models = 0.091251 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 35 model components to the UV plane model. ! The established model now contains 35 components and 0.091251 Jy ! Inverting map and beam ! Estimated beam: bmin=3.213 mas, bmaj=20.68 mas, bpa=-18.76 degrees ! Estimated noise=1104.22 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-7.5, -1.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00584515 Jy ! Component: 100 - total flux cleaned = 0.00906562 Jy ! Component: 150 - total flux cleaned = 0.0103302 Jy ! Component: 200 - total flux cleaned = 0.0105903 Jy ! Total flux subtracted in 200 components = 0.0105903 Jy ! Clean residual min=-0.002887 max=0.002796 Jy/beam ! Clean residual mean=-0.000001 rms=0.000703 Jy/beam ! Combined flux in latest and established models = 0.101841 Jy ! Adding 28 model components to the UV plane model. ! The established model now contains 61 components and 0.101841 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.777 mas, bmaj=32.67 mas, bpa=-8.648 degrees ! Estimated noise=1304.52 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000321935 Jy ! Component: 100 - total flux cleaned = 0.00036448 Jy ! Component: 150 - total flux cleaned = 0.000260186 Jy ! Component: 200 - total flux cleaned = 0.000140166 Jy ! Total flux subtracted in 200 components = 0.000140166 Jy ! Clean residual min=-0.002649 max=0.002503 Jy/beam ! Clean residual mean=-0.000002 rms=0.000909 Jy/beam ! Combined flux in latest and established models = 0.101981 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -2.76885e-05 Jy ! Component: 100 - total flux cleaned = 7.36273e-05 Jy ! Component: 150 - total flux cleaned = 0.000121312 Jy ! Component: 200 - total flux cleaned = 0.000144116 Jy ! Total flux subtracted in 200 components = 0.000144116 Jy ! Clean residual min=-0.002542 max=0.002410 Jy/beam ! Clean residual mean=-0.000002 rms=0.000880 Jy/beam ! Combined flux in latest and established models = 0.102126 Jy ! Adding 64 model components to the UV plane model. ! The established model now contains 124 components and 0.102126 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.213 mas, bmaj=20.68 mas, bpa=-18.76 degrees ! Estimated noise=1104.22 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -2.07409e-05 Jy ! Component: 100 - total flux cleaned = -1.33504e-05 Jy ! Component: 150 - total flux cleaned = -8.58176e-05 Jy ! Component: 200 - total flux cleaned = -5.54023e-05 Jy ! Total flux subtracted in 200 components = -5.54023e-05 Jy ! Clean residual min=-0.002372 max=0.002559 Jy/beam ! Clean residual mean=0.000000 rms=0.000617 Jy/beam ! Combined flux in latest and established models = 0.10207 Jy selfcal ! Performing phase self-cal ! Adding 34 model components to the UV plane model. ! The established model now contains 153 components and 0.10207 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.092884Jy sigma=0.000693 ! Fit after self-cal, rms=0.092858Jy sigma=0.000693 wmodel J1632-2258_S_2017_10_21_pus_map.mod ! Writing 153 model components to file: J1632-2258_S_2017_10_21_pus_map.mod wobs J1632-2258_S_2017_10_21_pus_uvs.fits ! Writing UV FITS file: J1632-2258_S_2017_10_21_pus_uvs.fits wwins J1632-2258_S_2017_10_21_pus_map.win ! wwins: Wrote 2 windows to J1632-2258_S_2017_10_21_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.000317176 Jy ! Component: 100 - total flux cleaned = 0.000544785 Jy ! Component: 150 - total flux cleaned = 0.00061061 Jy ! Component: 200 - total flux cleaned = 0.000515895 Jy ! Component: 250 - total flux cleaned = 0.00045722 Jy ! Component: 300 - total flux cleaned = 0.000486031 Jy ! Component: 350 - total flux cleaned = 0.000538435 Jy ! Component: 400 - total flux cleaned = 0.000563783 Jy ! Component: 450 - total flux cleaned = 0.000636376 Jy ! Component: 500 - total flux cleaned = 0.000614044 Jy ! Component: 550 - total flux cleaned = 0.000569728 Jy ! Component: 600 - total flux cleaned = 0.000463139 Jy ! Component: 650 - total flux cleaned = 0.000381024 Jy ! Component: 700 - total flux cleaned = 0.000341344 Jy ! Component: 750 - total flux cleaned = 0.000263458 Jy ! Component: 800 - total flux cleaned = 0.000150971 Jy ! Component: 850 - total flux cleaned = 0.000114872 Jy ! Component: 900 - total flux cleaned = 6.21278e-05 Jy ! Component: 950 - total flux cleaned = 1.06323e-05 Jy ! Component: 1000 - total flux cleaned = -2.2479e-05 Jy ! Component: 1050 - total flux cleaned = -6.20624e-06 Jy ! Component: 1100 - total flux cleaned = -6.56613e-06 Jy ! Component: 1150 - total flux cleaned = -3.82603e-05 Jy ! Component: 1200 - total flux cleaned = -3.81654e-05 Jy ! Component: 1250 - total flux cleaned = -3.80535e-05 Jy ! Component: 1300 - total flux cleaned = 3.72847e-05 Jy ! Component: 1350 - total flux cleaned = 6.69798e-05 Jy ! Component: 1400 - total flux cleaned = 0.000111145 Jy ! Component: 1450 - total flux cleaned = 0.000155113 Jy ! Component: 1500 - total flux cleaned = 0.000198724 Jy ! Component: 1550 - total flux cleaned = 0.000227621 Jy ! Component: 1600 - total flux cleaned = 0.000256393 Jy ! Component: 1650 - total flux cleaned = 0.00029948 Jy ! Component: 1700 - total flux cleaned = 0.000370933 Jy ! Component: 1750 - total flux cleaned = 0.000428011 Jy ! Component: 1800 - total flux cleaned = 0.000485049 Jy ! Component: 1850 - total flux cleaned = 0.00055681 Jy ! Component: 1900 - total flux cleaned = 0.000599935 Jy ! Component: 1950 - total flux cleaned = 0.000643164 Jy ! Component: 2000 - total flux cleaned = 0.000686554 Jy ! Component: 2050 - total flux cleaned = 0.00074465 Jy ! Component: 2100 - total flux cleaned = 0.000759207 Jy ! Component: 2150 - total flux cleaned = 0.000773773 Jy ! Component: 2200 - total flux cleaned = 0.00080329 Jy ! Component: 2250 - total flux cleaned = 0.000833008 Jy ! Component: 2300 - total flux cleaned = 0.000862907 Jy ! Component: 2350 - total flux cleaned = 0.000893115 Jy ! Component: 2400 - total flux cleaned = 0.00090834 Jy ! Component: 2450 - total flux cleaned = 0.000923763 Jy ! Component: 2500 - total flux cleaned = 0.000939178 Jy ! Component: 2550 - total flux cleaned = 0.000955008 Jy ! Component: 2600 - total flux cleaned = 0.000970949 Jy ! Component: 2650 - total flux cleaned = 0.000970914 Jy ! Component: 2700 - total flux cleaned = 0.000987331 Jy ! Component: 2750 - total flux cleaned = 0.000987183 Jy ! Component: 2800 - total flux cleaned = 0.00098707 Jy ! Component: 2850 - total flux cleaned = 0.00102104 Jy ! Component: 2900 - total flux cleaned = 0.00109049 Jy ! Component: 2950 - total flux cleaned = 0.0011438 Jy ! Component: 3000 - total flux cleaned = 0.00119772 Jy ! Component: 3050 - total flux cleaned = 0.00125302 Jy ! Component: 3100 - total flux cleaned = 0.00130902 Jy ! Component: 3150 - total flux cleaned = 0.00134699 Jy ! Component: 3200 - total flux cleaned = 0.00140513 Jy ! Component: 3250 - total flux cleaned = 0.00146424 Jy ! Component: 3300 - total flux cleaned = 0.00152437 Jy ! Component: 3350 - total flux cleaned = 0.00158602 Jy ! Component: 3400 - total flux cleaned = 0.0016489 Jy ! Component: 3450 - total flux cleaned = 0.00169145 Jy ! Component: 3500 - total flux cleaned = 0.00175676 Jy ! Component: 3550 - total flux cleaned = 0.00182364 Jy ! Component: 3600 - total flux cleaned = 0.00189209 Jy ! Component: 3650 - total flux cleaned = 0.00193849 Jy ! Component: 3700 - total flux cleaned = 0.00200947 Jy ! Component: 3750 - total flux cleaned = 0.00205845 Jy ! Component: 3800 - total flux cleaned = 0.00210817 Jy ! Component: 3850 - total flux cleaned = 0.00215876 Jy ! Component: 3900 - total flux cleaned = 0.00221101 Jy ! Component: 3950 - total flux cleaned = 0.00229153 Jy ! Component: 4000 - total flux cleaned = 0.00231943 Jy ! Component: 4050 - total flux cleaned = 0.00237605 Jy ! Total flux subtracted in 4096 components = 0.00243399 Jy ! Clean residual min=-0.001519 max=0.001558 Jy/beam ! Clean residual mean=0.000015 rms=0.000470 Jy/beam ! Combined flux in latest and established models = 0.104504 Jy keep ! Adding 232 model components to the UV plane model. ! The established model now contains 385 components and 0.104504 Jy ![Exited script file: muppet] wmap "J1632-2258_S_2017_10_21_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.213 x 20.68 at -18.76 degrees (North through East) ! Clean map min=-0.0023989 max=0.077781 Jy/beam ! Writing clean map to FITS file: J1632-2258_S_2017_10_21_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.0777807 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.00046932 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -1.81017 1.81017 3.62033 7.24067 14.4813 28.9627 57.9253 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0014 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.077 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.213 x 20.68 at -18.76 degrees (North through East) ! Clean map min=-0.0023989 max=0.077781 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J1632-2258_S_2017_10_21_pus_uvs.log closed on Sat May 11 21:02:27 2019