! Started logfile: J1632-2258_S_2017_10_09_pus_uvs.log on Sun May 12 13:16:14 2019 obs J1632-2258_S_2017_10_09_pus_uva.fits ! Reading UV FITS file: J1632-2258_S_2017_10_09_pus_uva.fits ! AN table 1: 146 integrations on 36 of 36 possible baselines. ! Apparent sampling: 0.759132 visibilities/baseline/integration-bin. ! Found source: J1632-2258 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 496 lines of history. ! ! Reading 15960 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J1632-2258_S_2017_10_09_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 192 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 336 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 264 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 1152 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.957532Jy sigma=0.006985 ! Fit after self-cal, rms=0.928445Jy sigma=0.006790 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.725 mas, bmaj=13 mas, bpa=-23.55 degrees ! Estimated noise=1464.49 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0549079 Jy ! Component: 100 - total flux cleaned = 0.0697797 Jy ! Total flux subtracted in 100 components = 0.0697797 Jy ! Clean residual min=-0.005145 max=0.006011 Jy/beam ! Clean residual mean=0.000008 rms=0.001277 Jy/beam ! Combined flux in latest and established models = 0.0697797 Jy ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 12 components and 0.0697797 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.099207Jy sigma=0.000672 ! Fit after self-cal, rms=0.098925Jy sigma=0.000671 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.36 mas, bmaj=15.19 mas, bpa=-22.87 degrees ! Estimated noise=979.993 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0106109 Jy ! Component: 100 - total flux cleaned = 0.0165904 Jy ! Component: 150 - total flux cleaned = 0.0205155 Jy ! Component: 200 - total flux cleaned = 0.0232373 Jy ! Total flux subtracted in 200 components = 0.0232373 Jy ! Clean residual min=-0.003487 max=0.003764 Jy/beam ! Clean residual mean=0.000019 rms=0.001034 Jy/beam ! Combined flux in latest and established models = 0.0930169 Jy ! Performing phase self-cal ! Adding 74 model components to the UV plane model. ! The established model now contains 85 components and 0.0930169 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.097605Jy sigma=0.000663 ! Fit after self-cal, rms=0.097521Jy sigma=0.000662 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.02 FD 0.93 HN 1.00 KP 1.04 ! LA 0.94 MK 1.07 NL 0.98 OV 1.00* ! PT 1.03 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.12 FD 0.95 HN 0.99 KP 1.06 ! LA 0.95 MK 1.08 NL 1.10 OV 1.00* ! PT 0.98 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 1.03 FD 0.94 HN 1.11 KP 0.90 ! LA 0.77 MK 1.03 NL 1.15 OV 1.00* ! PT 1.01 ! ! ! Correcting IF 4. ! A total of 162 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.00* FD 0.00* HN 0.00* KP 0.00* ! LA 0.00* MK 0.00* NL 0.00* OV 0.00* ! PT 0.00* ! ! ! Fit before self-cal, rms=0.097521Jy sigma=0.000662 ! Fit after self-cal, rms=0.096367Jy sigma=0.000661 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.428 mas, bmaj=15.46 mas, bpa=-22.95 degrees ! Estimated noise=988.168 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000433431 Jy ! Component: 100 - total flux cleaned = 0.000485964 Jy ! Component: 150 - total flux cleaned = 0.000462306 Jy ! Component: 200 - total flux cleaned = 0.000441184 Jy ! Total flux subtracted in 200 components = 0.000441184 Jy ! Clean residual min=-0.002990 max=0.003091 Jy/beam ! Clean residual mean=0.000011 rms=0.000805 Jy/beam ! Combined flux in latest and established models = 0.0934581 Jy ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 98 components and 0.0934581 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.096354Jy sigma=0.000661 ! Fit after self-cal, rms=0.096361Jy sigma=0.000661 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.096361Jy sigma=0.000661 ! Fit after self-cal, rms=0.097197Jy sigma=0.000660 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.443 mas, bmaj=15.56 mas, bpa=-22.96 degrees ! Estimated noise=997.225 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000286177 Jy ! Component: 100 - total flux cleaned = 0.000326584 Jy ! Component: 150 - total flux cleaned = 0.000326848 Jy ! Component: 200 - total flux cleaned = 0.000328062 Jy ! Total flux subtracted in 200 components = 0.000328062 Jy ! Clean residual min=-0.002823 max=0.002782 Jy/beam ! Clean residual mean=0.000009 rms=0.000723 Jy/beam ! Combined flux in latest and established models = 0.0937862 Jy selfcal ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 114 components and 0.0937862 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.097189Jy sigma=0.000660 ! Fit after self-cal, rms=0.097217Jy sigma=0.000660 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000164237 Jy ! Component: 100 - total flux cleaned = 0.000163161 Jy ! Component: 150 - total flux cleaned = 0.000164198 Jy ! Component: 200 - total flux cleaned = 0.000177004 Jy ! Total flux subtracted in 200 components = 0.000177004 Jy ! Clean residual min=-0.002845 max=0.002751 Jy/beam ! Clean residual mean=0.000009 rms=0.000724 Jy/beam ! Combined flux in latest and established models = 0.0939632 Jy ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 121 components and 0.0939632 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.097213Jy sigma=0.000660 ! Fit after self-cal, rms=0.097217Jy sigma=0.000660 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.097217Jy sigma=0.000660 ! Fit after self-cal, rms=0.097443Jy sigma=0.000659 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.453 mas, bmaj=15.59 mas, bpa=-22.92 degrees ! Estimated noise=999.044 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000312242 Jy ! Component: 100 - total flux cleaned = -0.000374108 Jy ! Component: 150 - total flux cleaned = -0.00037353 Jy ! Component: 200 - total flux cleaned = -0.000373533 Jy ! Total flux subtracted in 200 components = -0.000373533 Jy ! Clean residual min=-0.002748 max=0.002848 Jy/beam ! Clean residual mean=0.000006 rms=0.000680 Jy/beam ! Combined flux in latest and established models = 0.0935896 Jy selfcal ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 137 components and 0.0935896 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.097439Jy sigma=0.000659 ! Fit after self-cal, rms=0.097459Jy sigma=0.000659 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -1.57292e-05 Jy ! Component: 100 - total flux cleaned = -1.54764e-05 Jy ! Component: 150 - total flux cleaned = -1.58499e-05 Jy ! Component: 200 - total flux cleaned = -1.56383e-05 Jy ! Total flux subtracted in 200 components = -1.56383e-05 Jy ! Clean residual min=-0.002738 max=0.002847 Jy/beam ! Clean residual mean=0.000006 rms=0.000678 Jy/beam ! Combined flux in latest and established models = 0.093574 Jy ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 140 components and 0.093574 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.097456Jy sigma=0.000659 ! Fit after self-cal, rms=0.097458Jy sigma=0.000659 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.097458Jy sigma=0.000659 ! Fit after self-cal, rms=0.097747Jy sigma=0.000659 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.207 mas, bmaj=21.37 mas, bpa=-11.82 degrees ! Estimated noise=1168.89 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000146506 Jy ! Component: 100 - total flux cleaned = -0.000178547 Jy ! Component: 150 - total flux cleaned = -0.000217221 Jy ! Component: 200 - total flux cleaned = -0.000241269 Jy ! Total flux subtracted in 200 components = -0.000241269 Jy ! Clean residual min=-0.003082 max=0.002954 Jy/beam ! Clean residual mean=0.000010 rms=0.000868 Jy/beam ! Combined flux in latest and established models = 0.0933327 Jy selfcal ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 150 components and 0.0933327 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.097748Jy sigma=0.000659 ! Fit after self-cal, rms=0.097755Jy sigma=0.000659 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -7.20019e-06 Jy ! Component: 100 - total flux cleaned = -3.74895e-05 Jy ! Component: 150 - total flux cleaned = -7.25043e-05 Jy ! Component: 200 - total flux cleaned = -7.27801e-05 Jy ! Total flux subtracted in 200 components = -7.27801e-05 Jy ! Clean residual min=-0.003091 max=0.002958 Jy/beam ! Clean residual mean=0.000010 rms=0.000866 Jy/beam ! Combined flux in latest and established models = 0.0932599 Jy ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 154 components and 0.09326 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.097757Jy sigma=0.000659 ! Fit after self-cal, rms=0.097756Jy sigma=0.000659 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.462 mas, bmaj=15.61 mas, bpa=-22.87 degrees ! Estimated noise=1000.17 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.462 x 15.61 at -22.87 degrees (North through East) ! Clean map min=-0.0026931 max=0.073314 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.789 mas, bmaj=13.15 mas, bpa=-23.54 degrees ! Estimated noise=1505.96 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0550203 Jy ! Component: 100 - total flux cleaned = 0.0702107 Jy ! Component: 150 - total flux cleaned = 0.0775534 Jy ! Component: 200 - total flux cleaned = 0.082155 Jy ! Total flux subtracted in 200 components = 0.082155 Jy ! Clean residual min=-0.003745 max=0.003818 Jy/beam ! Clean residual mean=0.000000 rms=0.000983 Jy/beam ! Combined flux in latest and established models = 0.082155 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 47 model components to the UV plane model. ! The established model now contains 47 components and 0.082155 Jy ! Inverting map and beam ! Estimated beam: bmin=3.462 mas, bmaj=15.61 mas, bpa=-22.87 degrees ! Estimated noise=1000.17 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00473798 Jy ! Component: 100 - total flux cleaned = 0.00731351 Jy ! Component: 150 - total flux cleaned = 0.00881462 Jy ! Component: 200 - total flux cleaned = 0.00944216 Jy ! Total flux subtracted in 200 components = 0.00944216 Jy ! Clean residual min=-0.002934 max=0.002967 Jy/beam ! Clean residual mean=0.000005 rms=0.000701 Jy/beam ! Combined flux in latest and established models = 0.0915972 Jy ! Adding 54 model components to the UV plane model. ! The established model now contains 91 components and 0.0915972 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.207 mas, bmaj=21.37 mas, bpa=-11.82 degrees ! Estimated noise=1168.89 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000998374 Jy ! Component: 100 - total flux cleaned = 0.00107714 Jy ! Component: 150 - total flux cleaned = 0.00116777 Jy ! Component: 200 - total flux cleaned = 0.00122716 Jy ! Total flux subtracted in 200 components = 0.00122716 Jy ! Clean residual min=-0.003146 max=0.003076 Jy/beam ! Clean residual mean=0.000010 rms=0.000880 Jy/beam ! Combined flux in latest and established models = 0.0928244 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 3.58571e-05 Jy ! Component: 100 - total flux cleaned = 6.97759e-05 Jy ! Component: 150 - total flux cleaned = 0.000115566 Jy ! Component: 200 - total flux cleaned = 0.000129371 Jy ! Total flux subtracted in 200 components = 0.000129371 Jy ! Clean residual min=-0.003114 max=0.003044 Jy/beam ! Clean residual mean=0.000010 rms=0.000874 Jy/beam ! Combined flux in latest and established models = 0.0929537 Jy ! Adding 24 model components to the UV plane model. ! The established model now contains 100 components and 0.0929537 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.462 mas, bmaj=15.61 mas, bpa=-22.87 degrees ! Estimated noise=1000.17 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000291476 Jy ! Component: 100 - total flux cleaned = -0.000239483 Jy ! Component: 150 - total flux cleaned = -0.000196659 Jy ! Component: 200 - total flux cleaned = -0.000178999 Jy ! Total flux subtracted in 200 components = -0.000178999 Jy ! Clean residual min=-0.002774 max=0.002902 Jy/beam ! Clean residual mean=0.000005 rms=0.000677 Jy/beam ! Combined flux in latest and established models = 0.0927747 Jy selfcal ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 115 components and 0.0927747 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.097766Jy sigma=0.000659 ! Fit after self-cal, rms=0.097752Jy sigma=0.000659 wmodel J1632-2258_S_2017_10_09_pus_map.mod ! Writing 115 model components to file: J1632-2258_S_2017_10_09_pus_map.mod wobs J1632-2258_S_2017_10_09_pus_uvs.fits ! Writing UV FITS file: J1632-2258_S_2017_10_09_pus_uvs.fits wwins J1632-2258_S_2017_10_09_pus_map.win ! wwins: Wrote 1 windows to J1632-2258_S_2017_10_09_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.000261575 Jy ! Component: 100 - total flux cleaned = 0.000859915 Jy ! Component: 150 - total flux cleaned = 0.00113618 Jy ! Component: 200 - total flux cleaned = 0.0013932 Jy ! Component: 250 - total flux cleaned = 0.00167124 Jy ! Component: 300 - total flux cleaned = 0.00190327 Jy ! Component: 350 - total flux cleaned = 0.00206201 Jy ! Component: 400 - total flux cleaned = 0.00209204 Jy ! Component: 450 - total flux cleaned = 0.00214962 Jy ! Component: 500 - total flux cleaned = 0.00217851 Jy ! Component: 550 - total flux cleaned = 0.00217921 Jy ! Component: 600 - total flux cleaned = 0.00220651 Jy ! Component: 650 - total flux cleaned = 0.00215482 Jy ! Component: 700 - total flux cleaned = 0.00212935 Jy ! Component: 750 - total flux cleaned = 0.00205513 Jy ! Component: 800 - total flux cleaned = 0.00198315 Jy ! Component: 850 - total flux cleaned = 0.00196029 Jy ! Component: 900 - total flux cleaned = 0.0019145 Jy ! Component: 950 - total flux cleaned = 0.00189193 Jy ! Component: 1000 - total flux cleaned = 0.00182647 Jy ! Component: 1050 - total flux cleaned = 0.00180551 Jy ! Component: 1100 - total flux cleaned = 0.00176343 Jy ! Component: 1150 - total flux cleaned = 0.00164037 Jy ! Component: 1200 - total flux cleaned = 0.0015602 Jy ! Component: 1250 - total flux cleaned = 0.00148121 Jy ! Component: 1300 - total flux cleaned = 0.00138425 Jy ! Component: 1350 - total flux cleaned = 0.00128882 Jy ! Component: 1400 - total flux cleaned = 0.00119516 Jy ! Component: 1450 - total flux cleaned = 0.00112129 Jy ! Component: 1500 - total flux cleaned = 0.00113941 Jy ! Component: 1550 - total flux cleaned = 0.00108515 Jy ! Component: 1600 - total flux cleaned = 0.001067 Jy ! Component: 1650 - total flux cleaned = 0.000996741 Jy ! Component: 1700 - total flux cleaned = 0.000961908 Jy ! Component: 1750 - total flux cleaned = 0.000910642 Jy ! Component: 1800 - total flux cleaned = 0.000927638 Jy ! Component: 1850 - total flux cleaned = 0.00089404 Jy ! Component: 1900 - total flux cleaned = 0.000828053 Jy ! Component: 1950 - total flux cleaned = 0.000844295 Jy ! Component: 2000 - total flux cleaned = 0.00081201 Jy ! Component: 2050 - total flux cleaned = 0.00078012 Jy ! Component: 2100 - total flux cleaned = 0.000795723 Jy ! Component: 2150 - total flux cleaned = 0.000749038 Jy ! Component: 2200 - total flux cleaned = 0.000718234 Jy ! Component: 2250 - total flux cleaned = 0.000596862 Jy ! Component: 2300 - total flux cleaned = 0.000552011 Jy ! Component: 2350 - total flux cleaned = 0.00049254 Jy ! Component: 2400 - total flux cleaned = 0.000404353 Jy ! Component: 2450 - total flux cleaned = 0.000404464 Jy ! Component: 2500 - total flux cleaned = 0.000361 Jy ! Component: 2550 - total flux cleaned = 0.000232604 Jy ! Component: 2600 - total flux cleaned = 0.000204417 Jy ! Component: 2650 - total flux cleaned = 0.000148348 Jy ! Component: 2700 - total flux cleaned = 6.52882e-05 Jy ! Component: 2750 - total flux cleaned = -3.41309e-06 Jy ! Component: 2800 - total flux cleaned = -4.41716e-05 Jy ! Component: 2850 - total flux cleaned = -0.000138579 Jy ! Component: 2900 - total flux cleaned = -0.000178575 Jy ! Component: 2950 - total flux cleaned = -0.000218271 Jy ! Component: 3000 - total flux cleaned = -0.000296868 Jy ! Component: 3050 - total flux cleaned = -0.000374505 Jy ! Component: 3100 - total flux cleaned = -0.000400151 Jy ! Component: 3150 - total flux cleaned = -0.000451202 Jy ! Component: 3200 - total flux cleaned = -0.000527232 Jy ! Component: 3250 - total flux cleaned = -0.000577418 Jy ! Component: 3300 - total flux cleaned = -0.000664549 Jy ! Component: 3350 - total flux cleaned = -0.000726294 Jy ! Component: 3400 - total flux cleaned = -0.000787518 Jy ! Component: 3450 - total flux cleaned = -0.00084839 Jy ! Component: 3500 - total flux cleaned = -0.000908731 Jy ! Component: 3550 - total flux cleaned = -0.000992567 Jy ! Component: 3600 - total flux cleaned = -0.00107567 Jy ! Component: 3650 - total flux cleaned = -0.00111106 Jy ! Component: 3700 - total flux cleaned = -0.00119295 Jy ! Component: 3750 - total flux cleaned = -0.0012278 Jy ! Component: 3800 - total flux cleaned = -0.00129705 Jy ! Component: 3850 - total flux cleaned = -0.00135438 Jy ! Component: 3900 - total flux cleaned = -0.00139997 Jy ! Component: 3950 - total flux cleaned = -0.00149047 Jy ! Component: 4000 - total flux cleaned = -0.00152409 Jy ! Component: 4050 - total flux cleaned = -0.00156879 Jy ! Total flux subtracted in 4096 components = -0.00157982 Jy ! Clean residual min=-0.000696 max=0.000653 Jy/beam ! Clean residual mean=0.000000 rms=0.000208 Jy/beam ! Combined flux in latest and established models = 0.0911949 Jy keep ! Adding 276 model components to the UV plane model. ! The established model now contains 391 components and 0.0911949 Jy ![Exited script file: muppet] wmap "J1632-2258_S_2017_10_09_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.462 x 15.61 at -22.87 degrees (North through East) ! Clean map min=-0.0015973 max=0.07378 Jy/beam ! Writing clean map to FITS file: J1632-2258_S_2017_10_09_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.0737801 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000206577 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.839969 0.839969 1.67994 3.35988 6.71975 13.4395 26.879 53.758 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0006 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.073 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.462 x 15.61 at -22.87 degrees (North through East) ! Clean map min=-0.0015973 max=0.07378 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J1632-2258_S_2017_10_09_pus_uvs.log closed on Sun May 12 13:16:19 2019