! Started logfile: J1632-2258_S_2017_03_23_pus_uvs.log on Mon May 13 10:04:04 2019 obs J1632-2258_S_2017_03_23_pus_uva.fits ! Reading UV FITS file: J1632-2258_S_2017_03_23_pus_uva.fits ! AN table 1: 146 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.882953 visibilities/baseline/integration-bin. ! Found source: J1632-2258 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 481 lines of history. ! ! Reading 23204 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J1632-2258_S_2017_03_23_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 87 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 87 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 87 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 527 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.969335Jy sigma=0.006450 ! Fit after self-cal, rms=0.929724Jy sigma=0.006210 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.591 mas, bmaj=8.098 mas, bpa=3.311 degrees ! Estimated noise=1382.41 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0567842 Jy ! Component: 100 - total flux cleaned = 0.0700924 Jy ! Total flux subtracted in 100 components = 0.0700924 Jy ! Clean residual min=-0.004824 max=0.005529 Jy/beam ! Clean residual mean=-0.000023 rms=0.001189 Jy/beam ! Combined flux in latest and established models = 0.0700924 Jy ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 17 components and 0.0700924 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.111312Jy sigma=0.000677 ! Fit after self-cal, rms=0.111093Jy sigma=0.000676 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.312 mas, bmaj=9.471 mas, bpa=1.848 degrees ! Estimated noise=764.213 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00904371 Jy ! Component: 100 - total flux cleaned = 0.0132764 Jy ! Component: 150 - total flux cleaned = 0.015465 Jy ! Component: 200 - total flux cleaned = 0.0166131 Jy ! Total flux subtracted in 200 components = 0.0166131 Jy ! Clean residual min=-0.003071 max=0.004756 Jy/beam ! Clean residual mean=-0.000027 rms=0.000882 Jy/beam ! Combined flux in latest and established models = 0.0867055 Jy ! Performing phase self-cal ! Adding 36 model components to the UV plane model. ! The established model now contains 52 components and 0.0867055 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.110352Jy sigma=0.000671 ! Fit after self-cal, rms=0.110306Jy sigma=0.000671 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.01 FD 0.96 HN 1.07 KP 1.05 ! LA 0.97 MK 1.05 NL 0.97 OV 1.08 ! PT 0.99 SC 0.96 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00 FD 0.99 HN 1.05 KP 1.02 ! LA 1.00 MK 1.06 NL 1.12 OV 1.09 ! PT 0.95 SC 1.06 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 0.85 FD 1.08 HN 1.06 KP 0.91 ! LA 0.72 MK 1.07 NL 1.21 OV 1.02 ! PT 0.93 SC 1.03 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 1.04 FD 1.04 HN 0.95 KP 1.00* ! LA 0.91 MK 0.96 NL 1.00* OV 0.99 ! PT 0.90 SC 0.97 ! ! ! Fit before self-cal, rms=0.110306Jy sigma=0.000671 ! Fit after self-cal, rms=0.109306Jy sigma=0.000668 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.352 mas, bmaj=9.55 mas, bpa=2.157 degrees ! Estimated noise=766.501 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00019132 Jy ! Component: 100 - total flux cleaned = 0.000212125 Jy ! Component: 150 - total flux cleaned = 0.000228255 Jy ! Component: 200 - total flux cleaned = 0.00022782 Jy ! Total flux subtracted in 200 components = 0.00022782 Jy ! Clean residual min=-0.002437 max=0.003114 Jy/beam ! Clean residual mean=-0.000006 rms=0.000746 Jy/beam ! Combined flux in latest and established models = 0.0869333 Jy ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 55 components and 0.0869333 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.109300Jy sigma=0.000668 ! Fit after self-cal, rms=0.109342Jy sigma=0.000667 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.109342Jy sigma=0.000667 ! Fit after self-cal, rms=0.109882Jy sigma=0.000667 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.353 mas, bmaj=9.566 mas, bpa=2.211 degrees ! Estimated noise=767.79 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000216848 Jy ! Component: 100 - total flux cleaned = 0.000285359 Jy ! Component: 150 - total flux cleaned = 0.000342301 Jy ! Component: 200 - total flux cleaned = 0.000341996 Jy ! Total flux subtracted in 200 components = 0.000341996 Jy ! Clean residual min=-0.002447 max=0.002869 Jy/beam ! Clean residual mean=-0.000005 rms=0.000703 Jy/beam ! Combined flux in latest and established models = 0.0872753 Jy selfcal ! Performing phase self-cal ! Adding 7 model components to the UV plane model. ! The established model now contains 57 components and 0.0872753 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.109876Jy sigma=0.000667 ! Fit after self-cal, rms=0.109927Jy sigma=0.000666 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -4.44919e-05 Jy ! Component: 100 - total flux cleaned = -4.48909e-05 Jy ! Component: 150 - total flux cleaned = -4.42899e-05 Jy ! Component: 200 - total flux cleaned = -4.39718e-05 Jy ! Total flux subtracted in 200 components = -4.39718e-05 Jy ! Clean residual min=-0.002433 max=0.002873 Jy/beam ! Clean residual mean=-0.000006 rms=0.000705 Jy/beam ! Combined flux in latest and established models = 0.0872313 Jy ! Performing phase self-cal ! Adding 6 model components to the UV plane model. ! The established model now contains 60 components and 0.0872313 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.109924Jy sigma=0.000666 ! Fit after self-cal, rms=0.109923Jy sigma=0.000666 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.109923Jy sigma=0.000666 ! Fit after self-cal, rms=0.110182Jy sigma=0.000666 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.349 mas, bmaj=9.568 mas, bpa=2.227 degrees ! Estimated noise=767.719 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -3.82499e-07 Jy ! Component: 100 - total flux cleaned = 5.21896e-05 Jy ! Component: 150 - total flux cleaned = 7.47509e-05 Jy ! Component: 200 - total flux cleaned = 6.45451e-05 Jy ! Total flux subtracted in 200 components = 6.45451e-05 Jy ! Clean residual min=-0.002441 max=0.002798 Jy/beam ! Clean residual mean=-0.000005 rms=0.000699 Jy/beam ! Combined flux in latest and established models = 0.0872959 Jy selfcal ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 63 components and 0.0872959 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.110179Jy sigma=0.000666 ! Fit after self-cal, rms=0.110200Jy sigma=0.000666 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -6.50272e-05 Jy ! Component: 100 - total flux cleaned = -6.55168e-05 Jy ! Component: 150 - total flux cleaned = -6.50897e-05 Jy ! Component: 200 - total flux cleaned = -6.45411e-05 Jy ! Total flux subtracted in 200 components = -6.45411e-05 Jy ! Clean residual min=-0.002447 max=0.002799 Jy/beam ! Clean residual mean=-0.000005 rms=0.000699 Jy/beam ! Combined flux in latest and established models = 0.0872313 Jy ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 64 components and 0.0872313 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.110197Jy sigma=0.000666 ! Fit after self-cal, rms=0.110197Jy sigma=0.000666 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.110197Jy sigma=0.000666 ! Fit after self-cal, rms=0.110247Jy sigma=0.000666 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.931 mas, bmaj=18.98 mas, bpa=4.167 degrees ! Estimated noise=924.109 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000590767 Jy ! Component: 100 - total flux cleaned = 0.000589153 Jy ! Component: 150 - total flux cleaned = 0.000549822 Jy ! Component: 200 - total flux cleaned = 0.000516147 Jy ! Total flux subtracted in 200 components = 0.000516147 Jy ! Clean residual min=-0.003026 max=0.003557 Jy/beam ! Clean residual mean=-0.000006 rms=0.001029 Jy/beam ! Combined flux in latest and established models = 0.0877475 Jy selfcal ! Performing phase self-cal ! Adding 8 model components to the UV plane model. ! The established model now contains 67 components and 0.0877475 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.110252Jy sigma=0.000666 ! Fit after self-cal, rms=0.110254Jy sigma=0.000666 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 3.4705e-05 Jy ! Component: 100 - total flux cleaned = -1.03039e-05 Jy ! Component: 150 - total flux cleaned = -4.73255e-05 Jy ! Component: 200 - total flux cleaned = -7.90611e-05 Jy ! Total flux subtracted in 200 components = -7.90611e-05 Jy ! Clean residual min=-0.003037 max=0.003582 Jy/beam ! Clean residual mean=-0.000006 rms=0.001030 Jy/beam ! Combined flux in latest and established models = 0.0876684 Jy ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 71 components and 0.0876684 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.110260Jy sigma=0.000666 ! Fit after self-cal, rms=0.110253Jy sigma=0.000666 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.346 mas, bmaj=9.564 mas, bpa=2.25 degrees ! Estimated noise=767.722 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.346 x 9.564 at 2.25 degrees (North through East) ! Clean map min=-0.0023786 max=0.074879 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.616 mas, bmaj=8.152 mas, bpa=3.581 degrees ! Estimated noise=1401.34 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0568972 Jy ! Component: 100 - total flux cleaned = 0.0708624 Jy ! Component: 150 - total flux cleaned = 0.0773619 Jy ! Component: 200 - total flux cleaned = 0.08109 Jy ! Total flux subtracted in 200 components = 0.08109 Jy ! Clean residual min=-0.004029 max=0.004195 Jy/beam ! Clean residual mean=-0.000009 rms=0.001045 Jy/beam ! Combined flux in latest and established models = 0.08109 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 27 model components to the UV plane model. ! The established model now contains 27 components and 0.08109 Jy ! Inverting map and beam ! Estimated beam: bmin=3.346 mas, bmaj=9.564 mas, bpa=2.25 degrees ! Estimated noise=767.722 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-2.5, -0.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00449252 Jy ! Component: 100 - total flux cleaned = 0.0065857 Jy ! Component: 150 - total flux cleaned = 0.00728422 Jy ! Component: 200 - total flux cleaned = 0.00764086 Jy ! Total flux subtracted in 200 components = 0.00764086 Jy ! Clean residual min=-0.002364 max=0.002576 Jy/beam ! Clean residual mean=-0.000003 rms=0.000666 Jy/beam ! Combined flux in latest and established models = 0.0887309 Jy ! Adding 37 model components to the UV plane model. ! The established model now contains 60 components and 0.0887309 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.931 mas, bmaj=18.98 mas, bpa=4.167 degrees ! Estimated noise=924.109 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000903197 Jy ! Component: 100 - total flux cleaned = 0.00101224 Jy ! Component: 150 - total flux cleaned = 0.00101399 Jy ! Component: 200 - total flux cleaned = 0.00101371 Jy ! Total flux subtracted in 200 components = 0.00101371 Jy ! Clean residual min=-0.002811 max=0.003621 Jy/beam ! Clean residual mean=-0.000002 rms=0.000963 Jy/beam ! Combined flux in latest and established models = 0.0897446 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -1.66603e-06 Jy ! Component: 100 - total flux cleaned = -3.82985e-06 Jy ! Component: 150 - total flux cleaned = -5.36151e-06 Jy ! Component: 200 - total flux cleaned = -3.5157e-05 Jy ! Total flux subtracted in 200 components = -3.5157e-05 Jy ! Clean residual min=-0.002818 max=0.003589 Jy/beam ! Clean residual mean=-0.000002 rms=0.000959 Jy/beam ! Combined flux in latest and established models = 0.0897094 Jy ! Adding 17 model components to the UV plane model. ! The established model now contains 73 components and 0.0897094 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.346 mas, bmaj=9.564 mas, bpa=2.25 degrees ! Estimated noise=767.722 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000232289 Jy ! Component: 100 - total flux cleaned = -0.000333761 Jy ! Component: 150 - total flux cleaned = -0.000353697 Jy ! Component: 200 - total flux cleaned = -0.000352536 Jy ! Total flux subtracted in 200 components = -0.000352536 Jy ! Clean residual min=-0.002309 max=0.002474 Jy/beam ! Clean residual mean=-0.000002 rms=0.000652 Jy/beam ! Combined flux in latest and established models = 0.0893569 Jy selfcal ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 88 components and 0.0893569 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.110207Jy sigma=0.000666 ! Fit after self-cal, rms=0.110191Jy sigma=0.000666 wmodel J1632-2258_S_2017_03_23_pus_map.mod ! Writing 88 model components to file: J1632-2258_S_2017_03_23_pus_map.mod wobs J1632-2258_S_2017_03_23_pus_uvs.fits ! Writing UV FITS file: J1632-2258_S_2017_03_23_pus_uvs.fits wwins J1632-2258_S_2017_03_23_pus_map.win ! wwins: Wrote 2 windows to J1632-2258_S_2017_03_23_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.000407384 Jy ! Component: 100 - total flux cleaned = 0.000782327 Jy ! Component: 150 - total flux cleaned = 0.00089933 Jy ! Component: 200 - total flux cleaned = 0.00104881 Jy ! Component: 250 - total flux cleaned = 0.00119172 Jy ! Component: 300 - total flux cleaned = 0.00139563 Jy ! Component: 350 - total flux cleaned = 0.00155783 Jy ! Component: 400 - total flux cleaned = 0.00165203 Jy ! Component: 450 - total flux cleaned = 0.00186696 Jy ! Component: 500 - total flux cleaned = 0.00186709 Jy ! Component: 550 - total flux cleaned = 0.00186709 Jy ! Component: 600 - total flux cleaned = 0.00183867 Jy ! Component: 650 - total flux cleaned = 0.00181202 Jy ! Component: 700 - total flux cleaned = 0.00184034 Jy ! Component: 750 - total flux cleaned = 0.00189268 Jy ! Component: 800 - total flux cleaned = 0.00184115 Jy ! Component: 850 - total flux cleaned = 0.0018923 Jy ! Component: 900 - total flux cleaned = 0.0019417 Jy ! Component: 950 - total flux cleaned = 0.00194182 Jy ! Component: 1000 - total flux cleaned = 0.00196528 Jy ! Component: 1050 - total flux cleaned = 0.00196557 Jy ! Component: 1100 - total flux cleaned = 0.00205715 Jy ! Component: 1150 - total flux cleaned = 0.00207974 Jy ! Component: 1200 - total flux cleaned = 0.0020578 Jy ! Component: 1250 - total flux cleaned = 0.00205807 Jy ! Component: 1300 - total flux cleaned = 0.00207943 Jy ! Component: 1350 - total flux cleaned = 0.00210046 Jy ! Component: 1400 - total flux cleaned = 0.00201751 Jy ! Component: 1450 - total flux cleaned = 0.00201812 Jy ! Component: 1500 - total flux cleaned = 0.00201832 Jy ! Component: 1550 - total flux cleaned = 0.00199799 Jy ! Component: 1600 - total flux cleaned = 0.00195808 Jy ! Component: 1650 - total flux cleaned = 0.00197739 Jy ! Component: 1700 - total flux cleaned = 0.00191986 Jy ! Component: 1750 - total flux cleaned = 0.00190102 Jy ! Component: 1800 - total flux cleaned = 0.00182653 Jy ! Component: 1850 - total flux cleaned = 0.00180803 Jy ! Component: 1900 - total flux cleaned = 0.00182606 Jy ! Component: 1950 - total flux cleaned = 0.00175444 Jy ! Component: 2000 - total flux cleaned = 0.00175469 Jy ! Component: 2050 - total flux cleaned = 0.00171996 Jy ! Component: 2100 - total flux cleaned = 0.00170283 Jy ! Component: 2150 - total flux cleaned = 0.00160073 Jy ! Component: 2200 - total flux cleaned = 0.00158429 Jy ! Component: 2250 - total flux cleaned = 0.00153443 Jy ! Component: 2300 - total flux cleaned = 0.00155091 Jy ! Component: 2350 - total flux cleaned = 0.00150204 Jy ! Component: 2400 - total flux cleaned = 0.0014696 Jy ! Component: 2450 - total flux cleaned = 0.00143765 Jy ! Component: 2500 - total flux cleaned = 0.00135884 Jy ! Component: 2550 - total flux cleaned = 0.00131186 Jy ! Component: 2600 - total flux cleaned = 0.00121896 Jy ! Component: 2650 - total flux cleaned = 0.00115789 Jy ! Component: 2700 - total flux cleaned = 0.00112764 Jy ! Component: 2750 - total flux cleaned = 0.00108253 Jy ! Component: 2800 - total flux cleaned = 0.00105267 Jy ! Component: 2850 - total flux cleaned = 0.00102306 Jy ! Component: 2900 - total flux cleaned = 0.00102301 Jy ! Component: 2950 - total flux cleaned = 0.000993861 Jy ! Component: 3000 - total flux cleaned = 0.00100795 Jy ! Component: 3050 - total flux cleaned = 0.000865826 Jy ! Component: 3100 - total flux cleaned = 0.000893839 Jy ! Component: 3150 - total flux cleaned = 0.000879745 Jy ! Component: 3200 - total flux cleaned = 0.000838223 Jy ! Component: 3250 - total flux cleaned = 0.000851994 Jy ! Component: 3300 - total flux cleaned = 0.000783845 Jy ! Component: 3350 - total flux cleaned = 0.000729793 Jy ! Component: 3400 - total flux cleaned = 0.000702869 Jy ! Component: 3450 - total flux cleaned = 0.000623354 Jy ! Component: 3500 - total flux cleaned = 0.000623297 Jy ! Component: 3550 - total flux cleaned = 0.000584217 Jy ! Component: 3600 - total flux cleaned = 0.000596975 Jy ! Component: 3650 - total flux cleaned = 0.0005328 Jy ! Component: 3700 - total flux cleaned = 0.000494677 Jy ! Component: 3750 - total flux cleaned = 0.000494746 Jy ! Component: 3800 - total flux cleaned = 0.000419405 Jy ! Component: 3850 - total flux cleaned = 0.000382197 Jy ! Component: 3900 - total flux cleaned = 0.000369951 Jy ! Component: 3950 - total flux cleaned = 0.000382096 Jy ! Component: 4000 - total flux cleaned = 0.00035776 Jy ! Component: 4050 - total flux cleaned = 0.000273399 Jy ! Total flux subtracted in 4096 components = 0.000249329 Jy ! Clean residual min=-0.000629 max=0.000835 Jy/beam ! Clean residual mean=0.000003 rms=0.000233 Jy/beam ! Combined flux in latest and established models = 0.0896062 Jy keep ! Adding 308 model components to the UV plane model. ! The established model now contains 396 components and 0.0896063 Jy ![Exited script file: muppet] wmap "J1632-2258_S_2017_03_23_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.346 x 9.564 at 2.25 degrees (North through East) ! Clean map min=-0.0018921 max=0.074496 Jy/beam ! Writing clean map to FITS file: J1632-2258_S_2017_03_23_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.074496 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000229454 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.924025 0.924025 1.84805 3.6961 7.3922 14.7844 29.5688 59.1376 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0006 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.074 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.346 x 9.564 at 2.25 degrees (North through East) ! Clean map min=-0.0018921 max=0.074496 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J1632-2258_S_2017_03_23_pus_uvs.log closed on Mon May 13 10:04:10 2019