! Started logfile: J1632-1052_S_2017_08_12_pus_uvs.log on Fri May 10 15:03:14 2019 obs J1632-1052_S_2017_08_12_pus_uva.fits ! Reading UV FITS file: J1632-1052_S_2017_08_12_pus_uva.fits ! AN table 1: 96 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.609028 visibilities/baseline/integration-bin. ! Found source: J1632-1052 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 594 lines of history. ! ! Reading 10524 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J1632-1052_S_2017_08_12_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 201 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 201 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 201 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 882 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.956762Jy sigma=0.007829 ! Fit after self-cal, rms=0.929691Jy sigma=0.007617 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.353 mas, bmaj=6.893 mas, bpa=-4.451 degrees ! Estimated noise=1328.5 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0512491 Jy ! Component: 100 - total flux cleaned = 0.0746416 Jy ! Total flux subtracted in 100 components = 0.0746416 Jy ! Clean residual min=-0.007248 max=0.013655 Jy/beam ! Clean residual mean=-0.000015 rms=0.002765 Jy/beam ! Combined flux in latest and established models = 0.0746416 Jy ! Performing phase self-cal ! Adding 45 model components to the UV plane model. ! The established model now contains 45 components and 0.0746416 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.092296Jy sigma=0.000744 ! Fit after self-cal, rms=0.091920Jy sigma=0.000740 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.799 mas, bmaj=7.657 mas, bpa=-3.493 degrees ! Estimated noise=972.431 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0249752 Jy ! Component: 100 - total flux cleaned = 0.0396942 Jy ! Component: 150 - total flux cleaned = 0.0486785 Jy ! Component: 200 - total flux cleaned = 0.0542366 Jy ! Total flux subtracted in 200 components = 0.0542366 Jy ! Clean residual min=-0.005559 max=0.010564 Jy/beam ! Clean residual mean=-0.000023 rms=0.002203 Jy/beam ! Combined flux in latest and established models = 0.128878 Jy ! Performing phase self-cal ! Adding 53 model components to the UV plane model. ! The established model now contains 80 components and 0.128878 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.085098Jy sigma=0.000676 ! Fit after self-cal, rms=0.084814Jy sigma=0.000673 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* HN 1.52 KP 0.92 ! LA 0.85 MK 0.98 NL 0.99 OV 1.21 ! PT 0.87 SC 1.15 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* HN 1.26 KP 0.86 ! LA 0.84 MK 1.08 NL 1.09 OV 1.23 ! PT 0.86 SC 1.16 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* HN 1.42 KP 0.84 ! LA 0.87 MK 1.06 NL 1.04 OV 1.11 ! PT 0.85 SC 1.04 ! ! ! Correcting IF 4. ! A total of 78 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.00* FD 0.00* HN 0.00* KP 0.00* ! LA 0.00* MK 0.00* NL 0.00* OV 0.00* ! PT 0.00* SC 0.00* ! ! ! Fit before self-cal, rms=0.084814Jy sigma=0.000673 ! Fit after self-cal, rms=0.093713Jy sigma=0.000656 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.921 mas, bmaj=7.919 mas, bpa=-3.457 degrees ! Estimated noise=1002.72 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000120086 Jy ! Component: 100 - total flux cleaned = -0.000117499 Jy ! Component: 150 - total flux cleaned = -0.000113411 Jy ! Component: 200 - total flux cleaned = -7.77831e-05 Jy ! Total flux subtracted in 200 components = -7.77831e-05 Jy ! Clean residual min=-0.003308 max=0.003799 Jy/beam ! Clean residual mean=0.000002 rms=0.000894 Jy/beam ! Combined flux in latest and established models = 0.1288 Jy ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 89 components and 0.1288 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.093647Jy sigma=0.000656 ! Fit after self-cal, rms=0.094202Jy sigma=0.000654 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.094202Jy sigma=0.000654 ! Fit after self-cal, rms=0.095080Jy sigma=0.000653 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.891 mas, bmaj=7.972 mas, bpa=-3.957 degrees ! Estimated noise=992.932 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000471898 Jy ! Component: 100 - total flux cleaned = 0.000512601 Jy ! Component: 150 - total flux cleaned = 0.000546044 Jy ! Component: 200 - total flux cleaned = 0.000604948 Jy ! Total flux subtracted in 200 components = 0.000604948 Jy ! Clean residual min=-0.003071 max=0.003148 Jy/beam ! Clean residual mean=0.000002 rms=0.000731 Jy/beam ! Combined flux in latest and established models = 0.129405 Jy selfcal ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 95 components and 0.129405 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.095040Jy sigma=0.000653 ! Fit after self-cal, rms=0.095099Jy sigma=0.000653 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (49.5, -29.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00222269 Jy ! Component: 100 - total flux cleaned = 0.00244607 Jy ! Component: 150 - total flux cleaned = 0.00253905 Jy ! Component: 200 - total flux cleaned = 0.00266349 Jy ! Total flux subtracted in 200 components = 0.00266349 Jy ! Clean residual min=-0.002946 max=0.002617 Jy/beam ! Clean residual mean=0.000000 rms=0.000664 Jy/beam ! Combined flux in latest and established models = 0.132069 Jy ! Performing phase self-cal ! Adding 25 model components to the UV plane model. ! The established model now contains 118 components and 0.132069 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.094993Jy sigma=0.000652 ! Fit after self-cal, rms=0.094968Jy sigma=0.000652 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.094968Jy sigma=0.000652 ! Fit after self-cal, rms=0.094284Jy sigma=0.000652 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.869 mas, bmaj=8.026 mas, bpa=-4.456 degrees ! Estimated noise=983.088 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00127633 Jy ! Component: 100 - total flux cleaned = 0.00132372 Jy ! Component: 150 - total flux cleaned = 0.00136542 Jy ! Component: 200 - total flux cleaned = 0.00136454 Jy ! Total flux subtracted in 200 components = 0.00136454 Jy ! Clean residual min=-0.002991 max=0.002323 Jy/beam ! Clean residual mean=0.000000 rms=0.000630 Jy/beam ! Combined flux in latest and established models = 0.133433 Jy selfcal ! Performing phase self-cal ! Adding 25 model components to the UV plane model. ! The established model now contains 130 components and 0.133433 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.094230Jy sigma=0.000651 ! Fit after self-cal, rms=0.094199Jy sigma=0.000651 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000304003 Jy ! Component: 100 - total flux cleaned = 0.000343747 Jy ! Component: 150 - total flux cleaned = 0.000377869 Jy ! Component: 200 - total flux cleaned = 0.000377624 Jy ! Total flux subtracted in 200 components = 0.000377624 Jy ! Clean residual min=-0.002962 max=0.002287 Jy/beam ! Clean residual mean=0.000000 rms=0.000630 Jy/beam ! Combined flux in latest and established models = 0.133811 Jy ! Performing phase self-cal ! Adding 24 model components to the UV plane model. ! The established model now contains 137 components and 0.133811 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.094166Jy sigma=0.000651 ! Fit after self-cal, rms=0.094151Jy sigma=0.000651 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.094151Jy sigma=0.000651 ! Fit after self-cal, rms=0.093336Jy sigma=0.000651 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.255 mas, bmaj=17.85 mas, bpa=-6.399 degrees ! Estimated noise=1235.87 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0010232 Jy ! Component: 100 - total flux cleaned = 0.00113395 Jy ! Component: 150 - total flux cleaned = 0.00115895 Jy ! Component: 200 - total flux cleaned = 0.00118208 Jy ! Total flux subtracted in 200 components = 0.00118208 Jy ! Clean residual min=-0.002971 max=0.002832 Jy/beam ! Clean residual mean=0.000001 rms=0.000801 Jy/beam ! Combined flux in latest and established models = 0.134993 Jy selfcal ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 142 components and 0.134993 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.093319Jy sigma=0.000651 ! Fit after self-cal, rms=0.093305Jy sigma=0.000651 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 5.02747e-05 Jy ! Component: 100 - total flux cleaned = 9.14158e-05 Jy ! Component: 150 - total flux cleaned = 0.000131788 Jy ! Component: 200 - total flux cleaned = 0.000169588 Jy ! Total flux subtracted in 200 components = 0.000169588 Jy ! Clean residual min=-0.002958 max=0.002859 Jy/beam ! Clean residual mean=0.000001 rms=0.000801 Jy/beam ! Combined flux in latest and established models = 0.135163 Jy ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 146 components and 0.135163 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.093298Jy sigma=0.000651 ! Fit after self-cal, rms=0.093293Jy sigma=0.000651 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=2.847 mas, bmaj=8.041 mas, bpa=-4.748 degrees ! Estimated noise=973.087 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.847 x 8.041 at -4.748 degrees (North through East) ! Clean map min=-0.0028143 max=0.064264 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.395 mas, bmaj=7.138 mas, bpa=-5.191 degrees ! Estimated noise=1353.76 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0510318 Jy ! Component: 100 - total flux cleaned = 0.0764619 Jy ! Component: 150 - total flux cleaned = 0.0927142 Jy ! Component: 200 - total flux cleaned = 0.103468 Jy ! Total flux subtracted in 200 components = 0.103468 Jy ! Clean residual min=-0.005560 max=0.007416 Jy/beam ! Clean residual mean=-0.000002 rms=0.001540 Jy/beam ! Combined flux in latest and established models = 0.103468 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 46 model components to the UV plane model. ! The established model now contains 46 components and 0.103468 Jy ! Inverting map and beam ! Estimated beam: bmin=2.847 mas, bmaj=8.041 mas, bpa=-4.748 degrees ! Estimated noise=973.087 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (2.5, 1). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0110972 Jy ! Component: 100 - total flux cleaned = 0.0178931 Jy ! Component: 150 - total flux cleaned = 0.0226519 Jy ! Component: 200 - total flux cleaned = 0.0261003 Jy ! Total flux subtracted in 200 components = 0.0261003 Jy ! Clean residual min=-0.003504 max=0.003259 Jy/beam ! Clean residual mean=-0.000000 rms=0.000781 Jy/beam ! Combined flux in latest and established models = 0.129568 Jy ! Adding 47 model components to the UV plane model. ! The established model now contains 87 components and 0.129568 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.255 mas, bmaj=17.85 mas, bpa=-6.399 degrees ! Estimated noise=1235.87 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00400173 Jy ! Component: 100 - total flux cleaned = 0.00556405 Jy ! Component: 150 - total flux cleaned = 0.00597953 Jy ! Component: 200 - total flux cleaned = 0.00602283 Jy ! Total flux subtracted in 200 components = 0.00602283 Jy ! Clean residual min=-0.002760 max=0.002765 Jy/beam ! Clean residual mean=0.000001 rms=0.000799 Jy/beam ! Combined flux in latest and established models = 0.135591 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 3.55274e-05 Jy ! Component: 100 - total flux cleaned = 3.84016e-06 Jy ! Component: 150 - total flux cleaned = -5.23384e-05 Jy ! Component: 200 - total flux cleaned = -0.000104125 Jy ! Total flux subtracted in 200 components = -0.000104125 Jy ! Clean residual min=-0.002772 max=0.002734 Jy/beam ! Clean residual mean=0.000001 rms=0.000777 Jy/beam ! Combined flux in latest and established models = 0.135487 Jy ! Adding 39 model components to the UV plane model. ! The established model now contains 118 components and 0.135487 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=2.847 mas, bmaj=8.041 mas, bpa=-4.748 degrees ! Estimated noise=973.087 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000517647 Jy ! Component: 100 - total flux cleaned = -0.000442491 Jy ! Component: 150 - total flux cleaned = -0.000500287 Jy ! Component: 200 - total flux cleaned = -0.000552762 Jy ! Total flux subtracted in 200 components = -0.000552762 Jy ! Clean residual min=-0.002918 max=0.002349 Jy/beam ! Clean residual mean=0.000000 rms=0.000627 Jy/beam ! Combined flux in latest and established models = 0.134934 Jy selfcal ! Performing phase self-cal ! Adding 23 model components to the UV plane model. ! The established model now contains 140 components and 0.134934 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.093288Jy sigma=0.000651 ! Fit after self-cal, rms=0.093082Jy sigma=0.000650 wmodel J1632-1052_S_2017_08_12_pus_map.mod ! Writing 140 model components to file: J1632-1052_S_2017_08_12_pus_map.mod wobs J1632-1052_S_2017_08_12_pus_uvs.fits ! Writing UV FITS file: J1632-1052_S_2017_08_12_pus_uvs.fits wwins J1632-1052_S_2017_08_12_pus_map.win ! wwins: Wrote 3 windows to J1632-1052_S_2017_08_12_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.00129393 Jy ! Component: 100 - total flux cleaned = -0.00194422 Jy ! Component: 150 - total flux cleaned = -0.00209934 Jy ! Component: 200 - total flux cleaned = -0.00228003 Jy ! Component: 250 - total flux cleaned = -0.00228122 Jy ! Component: 300 - total flux cleaned = -0.00221635 Jy ! Component: 350 - total flux cleaned = -0.00212465 Jy ! Component: 400 - total flux cleaned = -0.00215541 Jy ! Component: 450 - total flux cleaned = -0.00218492 Jy ! Component: 500 - total flux cleaned = -0.00218463 Jy ! Component: 550 - total flux cleaned = -0.00210343 Jy ! Component: 600 - total flux cleaned = -0.00202397 Jy ! Component: 650 - total flux cleaned = -0.0019462 Jy ! Component: 700 - total flux cleaned = -0.00192071 Jy ! Component: 750 - total flux cleaned = -0.00182299 Jy ! Component: 800 - total flux cleaned = -0.00175125 Jy ! Component: 850 - total flux cleaned = -0.00163475 Jy ! Component: 900 - total flux cleaned = -0.00156665 Jy ! Component: 950 - total flux cleaned = -0.00156631 Jy ! Component: 1000 - total flux cleaned = -0.00145619 Jy ! Component: 1050 - total flux cleaned = -0.00136978 Jy ! Component: 1100 - total flux cleaned = -0.00126417 Jy ! Component: 1150 - total flux cleaned = -0.00124333 Jy ! Component: 1200 - total flux cleaned = -0.00120229 Jy ! Component: 1250 - total flux cleaned = -0.00112168 Jy ! Component: 1300 - total flux cleaned = -0.00110194 Jy ! Component: 1350 - total flux cleaned = -0.00100458 Jy ! Component: 1400 - total flux cleaned = -0.0010234 Jy ! Component: 1450 - total flux cleaned = -0.000966805 Jy ! Component: 1500 - total flux cleaned = -0.000966454 Jy ! Component: 1550 - total flux cleaned = -0.000893507 Jy ! Component: 1600 - total flux cleaned = -0.000893505 Jy ! Component: 1650 - total flux cleaned = -0.00084042 Jy ! Component: 1700 - total flux cleaned = -0.000805208 Jy ! Component: 1750 - total flux cleaned = -0.000770615 Jy ! Component: 1800 - total flux cleaned = -0.000753527 Jy ! Component: 1850 - total flux cleaned = -0.000668954 Jy ! Component: 1900 - total flux cleaned = -0.000601972 Jy ! Component: 1950 - total flux cleaned = -0.000519962 Jy ! Component: 2000 - total flux cleaned = -0.000487475 Jy ! Component: 2050 - total flux cleaned = -0.000407009 Jy ! Component: 2100 - total flux cleaned = -0.000359511 Jy ! Component: 2150 - total flux cleaned = -0.000233567 Jy ! Component: 2200 - total flux cleaned = -0.000233735 Jy ! Component: 2250 - total flux cleaned = -0.000203066 Jy ! Component: 2300 - total flux cleaned = -0.000111338 Jy ! Component: 2350 - total flux cleaned = -8.13159e-05 Jy ! Component: 2400 - total flux cleaned = -3.64708e-05 Jy ! Component: 2450 - total flux cleaned = 2.26741e-05 Jy ! Component: 2500 - total flux cleaned = 5.18361e-05 Jy ! Component: 2550 - total flux cleaned = 8.08419e-05 Jy ! Component: 2600 - total flux cleaned = 0.000138509 Jy ! Component: 2650 - total flux cleaned = 0.000224135 Jy ! Component: 2700 - total flux cleaned = 0.000294658 Jy ! Component: 2750 - total flux cleaned = 0.000308638 Jy ! Component: 2800 - total flux cleaned = 0.000405963 Jy ! Component: 2850 - total flux cleaned = 0.000488682 Jy ! Component: 2900 - total flux cleaned = 0.000570635 Jy ! Component: 2950 - total flux cleaned = 0.00061139 Jy ! Component: 3000 - total flux cleaned = 0.000705605 Jy ! Component: 3050 - total flux cleaned = 0.000758932 Jy ! Component: 3100 - total flux cleaned = 0.000825115 Jy ! Component: 3150 - total flux cleaned = 0.000917008 Jy ! Component: 3200 - total flux cleaned = 0.000969176 Jy ! Component: 3250 - total flux cleaned = 0.001008 Jy ! Component: 3300 - total flux cleaned = 0.00107224 Jy ! Component: 3350 - total flux cleaned = 0.00112323 Jy ! Component: 3400 - total flux cleaned = 0.00118648 Jy ! Component: 3450 - total flux cleaned = 0.00121175 Jy ! Component: 3500 - total flux cleaned = 0.0012743 Jy ! Component: 3550 - total flux cleaned = 0.00131146 Jy ! Component: 3600 - total flux cleaned = 0.00133625 Jy ! Component: 3650 - total flux cleaned = 0.00138529 Jy ! Component: 3700 - total flux cleaned = 0.00139759 Jy ! Component: 3750 - total flux cleaned = 0.00144613 Jy ! Component: 3800 - total flux cleaned = 0.00155454 Jy ! Component: 3850 - total flux cleaned = 0.00162629 Jy ! Component: 3900 - total flux cleaned = 0.00167392 Jy ! Component: 3950 - total flux cleaned = 0.00174504 Jy ! Component: 4000 - total flux cleaned = 0.00181584 Jy ! Component: 4050 - total flux cleaned = 0.00185103 Jy ! Total flux subtracted in 4096 components = 0.00194444 Jy ! Clean residual min=-0.000681 max=0.000684 Jy/beam ! Clean residual mean=-0.000000 rms=0.000206 Jy/beam ! Combined flux in latest and established models = 0.136879 Jy keep ! Adding 257 model components to the UV plane model. ! The established model now contains 397 components and 0.136879 Jy ![Exited script file: muppet] wmap "J1632-1052_S_2017_08_12_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.847 x 8.041 at -4.748 degrees (North through East) ! Clean map min=-0.0017252 max=0.064409 Jy/beam ! Writing clean map to FITS file: J1632-1052_S_2017_08_12_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.0644092 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000201534 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.938689 0.938689 1.87738 3.75476 7.50951 15.019 30.038 60.0761 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0006 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.064 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.847 x 8.041 at -4.748 degrees (North through East) ! Clean map min=-0.0017252 max=0.064409 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J1632-1052_S_2017_08_12_pus_uvs.log closed on Fri May 10 15:03:18 2019