! Started logfile: J1632-0033_X_2017_05_27_pus_uvs.log on Fri May 3 10:39:01 2019 obs J1632-0033_X_2017_05_27_pus_uva.fits ! Reading UV FITS file: J1632-0033_X_2017_05_27_pus_uva.fits ! AN table 1: 173 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.856776 visibilities/baseline/integration-bin. ! Found source: J1632-0033 ! ! There are 12 IFs, and a total of 12 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 8.44388e+09 3.2e+07 1 3.2e+07 ! 02 2 8.47588e+09 3.2e+07 1 3.2e+07 ! 03 3 8.50788e+09 3.2e+07 1 3.2e+07 ! 04 4 8.53988e+09 3.2e+07 1 3.2e+07 ! 05 5 8.60388e+09 3.2e+07 1 3.2e+07 ! 06 6 8.63588e+09 3.2e+07 1 3.2e+07 ! 07 7 8.69988e+09 3.2e+07 1 3.2e+07 ! 08 8 8.73188e+09 3.2e+07 1 3.2e+07 ! 09 9 8.79588e+09 3.2e+07 1 3.2e+07 ! 10 10 8.82788e+09 3.2e+07 1 3.2e+07 ! 11 11 8.85988e+09 3.2e+07 1 3.2e+07 ! 12 12 8.89188e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 1033 lines of history. ! ! Reading 80040 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..12 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 ! Reading IF 5 channels: 5..5 ! Reading IF 6 channels: 6..6 ! Reading IF 7 channels: 7..7 ! Reading IF 8 channels: 8..8 ! Reading IF 9 channels: 9..9 ! Reading IF 10 channels: 10..10 ! Reading IF 11 channels: 11..11 ! Reading IF 12 channels: 12..12 print "field_size =",field_size ! field_size = 512 print "field_cell =",field_cell ! field_cell = 0.2 print "taper_size =",taper_size ! taper_size = 70 ![@muppet J1632-0033_X_2017_05_27_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 512x512 pixels with 0.200x0.200 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 161 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 161 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 161 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 133 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 5. ! A total of 133 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 6. ! A total of 186 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 7. ! A total of 161 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 8. ! A total of 186 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 9. ! A total of 161 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 10. ! A total of 161 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 11. ! A total of 161 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 12. ! A total of 189 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.937060Jy sigma=0.008005 ! Fit after self-cal, rms=0.920636Jy sigma=0.007878 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.7984 mas, bmaj=1.781 mas, bpa=3.315 degrees ! Estimated noise=720.305 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0607818 Jy ! Component: 100 - total flux cleaned = 0.0832786 Jy ! Total flux subtracted in 100 components = 0.0832786 Jy ! Clean residual min=-0.003596 max=0.010304 Jy/beam ! Clean residual mean=-0.000024 rms=0.001199 Jy/beam ! Combined flux in latest and established models = 0.0832786 Jy ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 14 components and 0.0832786 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.086305Jy sigma=0.000682 ! Fit after self-cal, rms=0.086059Jy sigma=0.000680 ! Inverting map ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0132479 Jy ! Component: 100 - total flux cleaned = 0.0203444 Jy ! Total flux subtracted in 100 components = 0.0203444 Jy ! Clean residual min=-0.002262 max=0.003450 Jy/beam ! Clean residual mean=-0.000011 rms=0.000637 Jy/beam ! Combined flux in latest and established models = 0.103623 Jy ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 20 components and 0.103623 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.083695Jy sigma=0.000655 ! Fit after self-cal, rms=0.083621Jy sigma=0.000654 ! Inverting map ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00545483 Jy ! Component: 100 - total flux cleaned = 0.00830894 Jy ! Total flux subtracted in 100 components = 0.00830894 Jy ! Clean residual min=-0.001930 max=0.002443 Jy/beam ! Clean residual mean=-0.000005 rms=0.000504 Jy/beam ! Combined flux in latest and established models = 0.111932 Jy ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 26 components and 0.111932 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.083236Jy sigma=0.000650 ! Fit after self-cal, rms=0.083218Jy sigma=0.000650 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.9769 mas, bmaj=2.081 mas, bpa=2.426 degrees ! Estimated noise=301.589 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0.8, 2.8). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00347361 Jy ! Component: 100 - total flux cleaned = 0.00551311 Jy ! Component: 150 - total flux cleaned = 0.0067873 Jy ! Component: 200 - total flux cleaned = 0.00765848 Jy ! Total flux subtracted in 200 components = 0.00765848 Jy ! Clean residual min=-0.001144 max=0.001210 Jy/beam ! Clean residual mean=-0.000002 rms=0.000314 Jy/beam ! Combined flux in latest and established models = 0.11959 Jy ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 39 components and 0.11959 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.083078Jy sigma=0.000648 ! Fit after self-cal, rms=0.083068Jy sigma=0.000648 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00 FD 0.97 HN 1.03 KP 0.99 ! LA 0.99 MK 1.02 NL 0.95 OV 1.01 ! PT 0.96 SC 1.05 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 0.97 FD 0.99 HN 0.98 KP 0.98 ! LA 0.99 MK 1.02 NL 1.00 OV 0.98 ! PT 0.99 SC 1.05 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 0.95 FD 0.96 HN 1.01 KP 1.00 ! LA 0.99 MK 0.98 NL 0.97 OV 1.00 ! PT 1.01 SC 1.10 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 1.05 FD 0.94 HN 1.14 KP 1.04 ! LA 0.96 MK 0.99 NL 0.97 OV 1.00 ! PT 1.02 SC 1.04 ! ! ! Correcting IF 5. ! Telescope amplitude corrections in sub-array 1: ! BR 1.01 FD 0.98 HN 0.99 KP 1.02 ! LA 1.00 MK 1.03 NL 0.96 OV 0.95 ! PT 1.05 SC 0.99 ! ! ! Correcting IF 6. ! Telescope amplitude corrections in sub-array 1: ! BR 1.06 FD 0.97 HN 1.02 KP 1.03 ! LA 0.97 MK 1.00 NL 0.98 OV 0.96 ! PT 1.04 SC 1.22 ! ! ! Correcting IF 7. ! Telescope amplitude corrections in sub-array 1: ! BR 1.05 FD 0.98 HN 1.02 KP 0.99 ! LA 1.01 MK 1.00 NL 0.97 OV 1.00 ! PT 1.02 SC 1.00 ! ! ! Correcting IF 8. ! Telescope amplitude corrections in sub-array 1: ! BR 1.02 FD 1.04 HN 1.11 KP 1.00 ! LA 1.02 MK 1.02 NL 0.95 OV 0.99 ! PT 0.99 SC 1.00 ! ! ! Correcting IF 9. ! Telescope amplitude corrections in sub-array 1: ! BR 0.99 FD 0.99 HN 1.07 KP 1.02 ! LA 0.99 MK 0.97 NL 0.99 OV 0.97 ! PT 1.01 SC 0.98 ! ! ! Correcting IF 10. ! Telescope amplitude corrections in sub-array 1: ! BR 0.97 FD 0.98 HN 0.97 KP 1.01 ! LA 0.98 MK 1.00 NL 1.00 OV 0.99 ! PT 1.06 SC 0.93 ! ! ! Correcting IF 11. ! Telescope amplitude corrections in sub-array 1: ! BR 0.96 FD 1.00 HN 1.11 KP 1.05 ! LA 0.99 MK 0.94 NL 0.99 OV 0.96 ! PT 1.04 SC 0.89 ! ! ! Correcting IF 12. ! Telescope amplitude corrections in sub-array 1: ! BR 0.97 FD 0.97 HN 1.07 KP 1.04 ! LA 0.98 MK 0.93 NL 0.96 OV 0.99 ! PT 1.05 SC 0.94 ! ! ! Fit before self-cal, rms=0.083068Jy sigma=0.000648 ! Fit after self-cal, rms=0.083659Jy sigma=0.000647 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.9802 mas, bmaj=2.085 mas, bpa=2.331 degrees ! Estimated noise=300.684 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000799242 Jy ! Component: 100 - total flux cleaned = 0.000989037 Jy ! Component: 150 - total flux cleaned = 0.00113871 Jy ! Component: 200 - total flux cleaned = 0.00124673 Jy ! Total flux subtracted in 200 components = 0.00124673 Jy ! Clean residual min=-0.000952 max=0.001023 Jy/beam ! Clean residual mean=-0.000000 rms=0.000264 Jy/beam ! Combined flux in latest and established models = 0.120837 Jy ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 54 components and 0.120837 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.083642Jy sigma=0.000647 ! Fit after self-cal, rms=0.083674Jy sigma=0.000647 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.083674Jy sigma=0.000647 ! Fit after self-cal, rms=0.087449Jy sigma=0.000646 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.9786 mas, bmaj=2.078 mas, bpa=2.695 degrees ! Estimated noise=299.945 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000420217 Jy ! Component: 100 - total flux cleaned = 0.000533989 Jy ! Component: 150 - total flux cleaned = 0.000615437 Jy ! Component: 200 - total flux cleaned = 0.000699437 Jy ! Total flux subtracted in 200 components = 0.000699437 Jy ! Clean residual min=-0.000778 max=0.000773 Jy/beam ! Clean residual mean=0.000003 rms=0.000220 Jy/beam ! Combined flux in latest and established models = 0.121537 Jy selfcal ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 57 components and 0.121537 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.087442Jy sigma=0.000646 ! Fit after self-cal, rms=0.087492Jy sigma=0.000646 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 9.09472e-05 Jy ! Component: 100 - total flux cleaned = 0.000173376 Jy ! Component: 150 - total flux cleaned = 0.000222747 Jy ! Component: 200 - total flux cleaned = 0.000256504 Jy ! Total flux subtracted in 200 components = 0.000256504 Jy ! Clean residual min=-0.000785 max=0.000766 Jy/beam ! Clean residual mean=0.000003 rms=0.000218 Jy/beam ! Combined flux in latest and established models = 0.121793 Jy ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 65 components and 0.121793 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.087488Jy sigma=0.000646 ! Fit after self-cal, rms=0.087488Jy sigma=0.000646 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.087488Jy sigma=0.000646 ! Fit after self-cal, rms=0.088396Jy sigma=0.000646 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.9766 mas, bmaj=2.073 mas, bpa=2.893 degrees ! Estimated noise=299.221 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000197371 Jy ! Component: 100 - total flux cleaned = 0.000284745 Jy ! Component: 150 - total flux cleaned = 0.000372805 Jy ! Component: 200 - total flux cleaned = 0.000451017 Jy ! Total flux subtracted in 200 components = 0.000451017 Jy ! Clean residual min=-0.000744 max=0.000735 Jy/beam ! Clean residual mean=0.000003 rms=0.000213 Jy/beam ! Combined flux in latest and established models = 0.122244 Jy selfcal ! Performing phase self-cal ! Adding 22 model components to the UV plane model. ! The established model now contains 69 components and 0.122244 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.088392Jy sigma=0.000646 ! Fit after self-cal, rms=0.088398Jy sigma=0.000646 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 5.33439e-05 Jy ! Component: 100 - total flux cleaned = 0.00011138 Jy ! Component: 150 - total flux cleaned = 0.000137788 Jy ! Component: 200 - total flux cleaned = 0.000162741 Jy ! Total flux subtracted in 200 components = 0.000162741 Jy ! Clean residual min=-0.000748 max=0.000728 Jy/beam ! Clean residual mean=0.000003 rms=0.000212 Jy/beam ! Combined flux in latest and established models = 0.122407 Jy ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 74 components and 0.122407 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.088396Jy sigma=0.000646 ! Fit after self-cal, rms=0.088396Jy sigma=0.000646 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.088396Jy sigma=0.000646 ! Fit after self-cal, rms=0.088298Jy sigma=0.000646 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.172 mas, bmaj=3.319 mas, bpa=2.162 degrees ! Estimated noise=370.207 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000296081 Jy ! Component: 100 - total flux cleaned = 0.000394841 Jy ! Component: 150 - total flux cleaned = 0.000481659 Jy ! Component: 200 - total flux cleaned = 0.000542686 Jy ! Total flux subtracted in 200 components = 0.000542686 Jy ! Clean residual min=-0.000814 max=0.000931 Jy/beam ! Clean residual mean=0.000007 rms=0.000289 Jy/beam ! Combined flux in latest and established models = 0.12295 Jy selfcal ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 85 components and 0.12295 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.088298Jy sigma=0.000645 ! Fit after self-cal, rms=0.088299Jy sigma=0.000645 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 1.05564e-05 Jy ! Component: 100 - total flux cleaned = 7.17462e-05 Jy ! Component: 150 - total flux cleaned = 0.000116675 Jy ! Component: 200 - total flux cleaned = 0.000129312 Jy ! Total flux subtracted in 200 components = 0.000129312 Jy ! Clean residual min=-0.000814 max=0.000924 Jy/beam ! Clean residual mean=0.000007 rms=0.000287 Jy/beam ! Combined flux in latest and established models = 0.123079 Jy ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 91 components and 0.123079 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.088299Jy sigma=0.000645 ! Fit after self-cal, rms=0.088299Jy sigma=0.000645 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=0.9748 mas, bmaj=2.069 mas, bpa=3.055 degrees ! Estimated noise=298.681 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.9748 x 2.069 at 3.055 degrees (North through East) ! Clean map min=-0.00069228 max=0.079068 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.7956 mas, bmaj=1.77 mas, bpa=4.112 degrees ! Estimated noise=708.697 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0604312 Jy ! Component: 100 - total flux cleaned = 0.0856989 Jy ! Component: 150 - total flux cleaned = 0.0987677 Jy ! Component: 200 - total flux cleaned = 0.106008 Jy ! Total flux subtracted in 200 components = 0.106008 Jy ! Clean residual min=-0.002175 max=0.003596 Jy/beam ! Clean residual mean=-0.000007 rms=0.000564 Jy/beam ! Combined flux in latest and established models = 0.106008 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 19 model components to the UV plane model. ! The established model now contains 19 components and 0.106008 Jy ! Inverting map and beam ! Estimated beam: bmin=0.9748 mas, bmaj=2.069 mas, bpa=3.055 degrees ! Estimated noise=298.681 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00576952 Jy ! Component: 100 - total flux cleaned = 0.00927574 Jy ! Component: 150 - total flux cleaned = 0.0115478 Jy ! Component: 200 - total flux cleaned = 0.0130921 Jy ! Total flux subtracted in 200 components = 0.0130921 Jy ! Clean residual min=-0.000864 max=0.000847 Jy/beam ! Clean residual mean=0.000002 rms=0.000246 Jy/beam ! Combined flux in latest and established models = 0.1191 Jy ! Adding 32 model components to the UV plane model. ! The established model now contains 44 components and 0.1191 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.172 mas, bmaj=3.319 mas, bpa=2.162 degrees ! Estimated noise=370.207 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00148181 Jy ! Component: 100 - total flux cleaned = 0.00233798 Jy ! Component: 150 - total flux cleaned = 0.00291048 Jy ! Component: 200 - total flux cleaned = 0.00330256 Jy ! Total flux subtracted in 200 components = 0.00330256 Jy ! Clean residual min=-0.000840 max=0.000941 Jy/beam ! Clean residual mean=0.000006 rms=0.000291 Jy/beam ! Combined flux in latest and established models = 0.122403 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000270244 Jy ! Component: 100 - total flux cleaned = 0.000382868 Jy ! Component: 150 - total flux cleaned = 0.000436491 Jy ! Component: 200 - total flux cleaned = 0.000460548 Jy ! Total flux subtracted in 200 components = 0.000460548 Jy ! Clean residual min=-0.000827 max=0.000949 Jy/beam ! Clean residual mean=0.000006 rms=0.000286 Jy/beam ! Combined flux in latest and established models = 0.122864 Jy ! Adding 40 model components to the UV plane model. ! The established model now contains 76 components and 0.122864 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=0.9748 mas, bmaj=2.069 mas, bpa=3.055 degrees ! Estimated noise=298.681 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000143456 Jy ! Component: 100 - total flux cleaned = -0.000130279 Jy ! Component: 150 - total flux cleaned = -0.000141245 Jy ! Component: 200 - total flux cleaned = -0.000141626 Jy ! Total flux subtracted in 200 components = -0.000141626 Jy ! Clean residual min=-0.000697 max=0.000735 Jy/beam ! Clean residual mean=0.000003 rms=0.000205 Jy/beam ! Combined flux in latest and established models = 0.122722 Jy selfcal ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 90 components and 0.122722 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.088296Jy sigma=0.000645 ! Fit after self-cal, rms=0.088295Jy sigma=0.000645 wmodel J1632-0033_X_2017_05_27_pus_map.mod ! Writing 90 model components to file: J1632-0033_X_2017_05_27_pus_map.mod wobs J1632-0033_X_2017_05_27_pus_uvs.fits ! Writing UV FITS file: J1632-0033_X_2017_05_27_pus_uvs.fits wwins J1632-0033_X_2017_05_27_pus_map.win ! wwins: Wrote 2 windows to J1632-0033_X_2017_05_27_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=2048 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 8.17758e-05 Jy ! Component: 100 - total flux cleaned = 6.9076e-05 Jy ! Component: 150 - total flux cleaned = 8.09111e-05 Jy ! Component: 200 - total flux cleaned = 9.27799e-05 Jy ! Component: 250 - total flux cleaned = 0.000104211 Jy ! Component: 300 - total flux cleaned = 9.3533e-05 Jy ! Component: 350 - total flux cleaned = 0.000115085 Jy ! Component: 400 - total flux cleaned = 0.000125691 Jy ! Component: 450 - total flux cleaned = 0.000136187 Jy ! Component: 500 - total flux cleaned = 0.000186322 Jy ! Component: 550 - total flux cleaned = 0.000186302 Jy ! Component: 600 - total flux cleaned = 0.000234708 Jy ! Component: 650 - total flux cleaned = 0.000244211 Jy ! Component: 700 - total flux cleaned = 0.000281782 Jy ! Component: 750 - total flux cleaned = 0.000318332 Jy ! Component: 800 - total flux cleaned = 0.000327245 Jy ! Component: 850 - total flux cleaned = 0.000345012 Jy ! Component: 900 - total flux cleaned = 0.000362429 Jy ! Component: 950 - total flux cleaned = 0.000362509 Jy ! Component: 1000 - total flux cleaned = 0.000422106 Jy ! Component: 1050 - total flux cleaned = 0.000447081 Jy ! Component: 1100 - total flux cleaned = 0.000455363 Jy ! Component: 1150 - total flux cleaned = 0.000488083 Jy ! Component: 1200 - total flux cleaned = 0.000528332 Jy ! Component: 1250 - total flux cleaned = 0.00054427 Jy ! Component: 1300 - total flux cleaned = 0.000575769 Jy ! Component: 1350 - total flux cleaned = 0.000622345 Jy ! Component: 1400 - total flux cleaned = 0.000630075 Jy ! Component: 1450 - total flux cleaned = 0.000668063 Jy ! Component: 1500 - total flux cleaned = 0.00070531 Jy ! Component: 1550 - total flux cleaned = 0.000697813 Jy ! Component: 1600 - total flux cleaned = 0.000727023 Jy ! Component: 1650 - total flux cleaned = 0.000726893 Jy ! Component: 1700 - total flux cleaned = 0.000712487 Jy ! Component: 1750 - total flux cleaned = 0.000726737 Jy ! Component: 1800 - total flux cleaned = 0.00072682 Jy ! Component: 1850 - total flux cleaned = 0.000754621 Jy ! Component: 1900 - total flux cleaned = 0.000747726 Jy ! Component: 1950 - total flux cleaned = 0.000747725 Jy ! Component: 2000 - total flux cleaned = 0.00073429 Jy ! Total flux subtracted in 2048 components = 0.00072103 Jy ! Clean residual min=-0.000351 max=0.000373 Jy/beam ! Clean residual mean=0.000001 rms=0.000130 Jy/beam ! Combined flux in latest and established models = 0.123443 Jy keep ! Adding 156 model components to the UV plane model. ! The established model now contains 246 components and 0.123443 Jy ![Exited script file: muppet] wmap "J1632-0033_X_2017_05_27_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.9748 x 2.069 at 3.055 degrees (North through East) ! Clean map min=-0.000609 max=0.078177 Jy/beam ! Writing clean map to FITS file: J1632-0033_X_2017_05_27_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.0781769 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000130253 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.49984 0.49984 0.999681 1.99936 3.99872 7.99744 15.9949 31.9898 63.9796 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0003 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.078 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.9748 x 2.069 at 3.055 degrees (North through East) ! Clean map min=-0.000609 max=0.078177 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J1632-0033_X_2017_05_27_pus_uvs.log closed on Fri May 3 10:39:07 2019