! Started logfile: J1632-0033_S_2017_05_27_pus_uvs.log on Fri May 3 11:10:43 2019 obs J1632-0033_S_2017_05_27_pus_uva.fits ! Reading UV FITS file: J1632-0033_S_2017_05_27_pus_uva.fits ! AN table 1: 173 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.856776 visibilities/baseline/integration-bin. ! Found source: J1632-0033 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 1211 lines of history. ! ! Reading 26680 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J1632-0033_S_2017_05_27_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 133 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 235 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 191 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 1004 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.852869Jy sigma=0.017153 ! Fit after self-cal, rms=0.835429Jy sigma=0.017097 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.309 mas, bmaj=7.925 mas, bpa=-3.048 degrees ! Estimated noise=822.075 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.107252 Jy ! Component: 100 - total flux cleaned = 0.130423 Jy ! Total flux subtracted in 100 components = 0.130423 Jy ! Clean residual min=-0.025663 max=0.026218 Jy/beam ! Clean residual mean=-0.000057 rms=0.010524 Jy/beam ! Combined flux in latest and established models = 0.130423 Jy ! Performing phase self-cal ! Adding 5 model components to the UV plane model. ! The established model now contains 5 components and 0.130423 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.117337Jy sigma=0.002129 ! Fit after self-cal, rms=0.117323Jy sigma=0.002128 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.778 mas, bmaj=8.565 mas, bpa=-1.436 degrees ! Estimated noise=581.136 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.019045 Jy ! Component: 100 - total flux cleaned = 0.0274268 Jy ! Component: 150 - total flux cleaned = 0.0281118 Jy ! Component: 200 - total flux cleaned = 0.0277712 Jy ! Total flux subtracted in 200 components = 0.0277712 Jy ! Clean residual min=-0.018835 max=0.018274 Jy/beam ! Clean residual mean=-0.000044 rms=0.007586 Jy/beam ! Combined flux in latest and established models = 0.158194 Jy ! Performing phase self-cal ! Adding 22 model components to the UV plane model. ! The established model now contains 24 components and 0.158194 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.110566Jy sigma=0.002402 ! Fit after self-cal, rms=0.110549Jy sigma=0.002402 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.83 FD 0.87 HN 0.94 KP 0.93 ! LA 0.89 MK 0.97 NL 0.81 OV 0.94 ! PT 0.99 SC 1.06 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.54 FD 0.90 HN 0.98 KP 0.91 ! LA 0.87 MK 0.99 NL 0.96 OV 0.95 ! PT 0.93 SC 1.16 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 0.75 FD 0.93 HN 0.98 KP 0.91 ! LA 0.91 MK 1.04 NL 0.93 OV 0.88 ! PT 0.95 SC 1.14 ! ! ! Correcting IF 4. ! A total of 162 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 0.98 HN 0.98 KP 1.00* ! LA 0.92 MK 1.15 NL 1.00* OV 1.00* ! PT 0.96 SC 1.00* ! ! ! Fit before self-cal, rms=0.110549Jy sigma=0.002402 ! Fit after self-cal, rms=0.098372Jy sigma=0.000688 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.812 mas, bmaj=8.52 mas, bpa=-1.667 degrees ! Estimated noise=580.622 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00175461 Jy ! Component: 100 - total flux cleaned = 0.00159377 Jy ! Component: 150 - total flux cleaned = 0.00145238 Jy ! Component: 200 - total flux cleaned = 0.00132865 Jy ! Total flux subtracted in 200 components = 0.00132865 Jy ! Clean residual min=-0.003012 max=0.003121 Jy/beam ! Clean residual mean=0.000017 rms=0.000789 Jy/beam ! Combined flux in latest and established models = 0.159523 Jy ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 32 components and 0.159523 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.098159Jy sigma=0.000687 ! Fit after self-cal, rms=0.098243Jy sigma=0.000687 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.098243Jy sigma=0.000687 ! Fit after self-cal, rms=0.096472Jy sigma=0.000679 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.782 mas, bmaj=8.504 mas, bpa=-1.662 degrees ! Estimated noise=583.078 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00160033 Jy ! Component: 100 - total flux cleaned = 0.00179663 Jy ! Component: 150 - total flux cleaned = 0.00176154 Jy ! Component: 200 - total flux cleaned = 0.00166483 Jy ! Total flux subtracted in 200 components = 0.00166483 Jy ! Clean residual min=-0.002490 max=0.002471 Jy/beam ! Clean residual mean=0.000010 rms=0.000582 Jy/beam ! Combined flux in latest and established models = 0.161188 Jy selfcal ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 35 components and 0.161188 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.096381Jy sigma=0.000679 ! Fit after self-cal, rms=0.096392Jy sigma=0.000679 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000221502 Jy ! Component: 100 - total flux cleaned = -0.000247688 Jy ! Component: 150 - total flux cleaned = -0.0002986 Jy ! Component: 200 - total flux cleaned = -0.000347 Jy ! Total flux subtracted in 200 components = -0.000347 Jy ! Clean residual min=-0.002490 max=0.002396 Jy/beam ! Clean residual mean=0.000010 rms=0.000577 Jy/beam ! Combined flux in latest and established models = 0.160841 Jy ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 40 components and 0.160841 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.096361Jy sigma=0.000679 ! Fit after self-cal, rms=0.096358Jy sigma=0.000679 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.096358Jy sigma=0.000679 ! Fit after self-cal, rms=0.096575Jy sigma=0.000678 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.768 mas, bmaj=8.478 mas, bpa=-1.668 degrees ! Estimated noise=586.324 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00130319 Jy ! Component: 100 - total flux cleaned = 0.00147493 Jy ! Component: 150 - total flux cleaned = 0.00151887 Jy ! Component: 200 - total flux cleaned = 0.00153688 Jy ! Total flux subtracted in 200 components = 0.00153688 Jy ! Clean residual min=-0.002330 max=0.002297 Jy/beam ! Clean residual mean=0.000009 rms=0.000562 Jy/beam ! Combined flux in latest and established models = 0.162378 Jy selfcal ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 44 components and 0.162378 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.096530Jy sigma=0.000678 ! Fit after self-cal, rms=0.096525Jy sigma=0.000678 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -5.40078e-05 Jy ! Component: 100 - total flux cleaned = -3.51421e-05 Jy ! Component: 150 - total flux cleaned = -1.97134e-05 Jy ! Component: 200 - total flux cleaned = -3.34031e-05 Jy ! Total flux subtracted in 200 components = -3.34031e-05 Jy ! Clean residual min=-0.002325 max=0.002252 Jy/beam ! Clean residual mean=0.000009 rms=0.000560 Jy/beam ! Combined flux in latest and established models = 0.162344 Jy ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 53 components and 0.162344 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.096517Jy sigma=0.000678 ! Fit after self-cal, rms=0.096517Jy sigma=0.000678 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.096517Jy sigma=0.000678 ! Fit after self-cal, rms=0.096939Jy sigma=0.000678 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.78 mas, bmaj=13.1 mas, bpa=-4.419 degrees ! Estimated noise=688.408 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00128056 Jy ! Component: 100 - total flux cleaned = 0.00147465 Jy ! Component: 150 - total flux cleaned = 0.00150258 Jy ! Component: 200 - total flux cleaned = 0.0014922 Jy ! Total flux subtracted in 200 components = 0.0014922 Jy ! Clean residual min=-0.003119 max=0.002725 Jy/beam ! Clean residual mean=0.000018 rms=0.000760 Jy/beam ! Combined flux in latest and established models = 0.163836 Jy selfcal ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 69 components and 0.163836 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.096906Jy sigma=0.000678 ! Fit after self-cal, rms=0.096900Jy sigma=0.000678 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -2.01876e-05 Jy ! Component: 100 - total flux cleaned = -2.00561e-05 Jy ! Component: 150 - total flux cleaned = -2.93825e-05 Jy ! Component: 200 - total flux cleaned = -5.53361e-05 Jy ! Total flux subtracted in 200 components = -5.53361e-05 Jy ! Clean residual min=-0.003102 max=0.002730 Jy/beam ! Clean residual mean=0.000018 rms=0.000758 Jy/beam ! Combined flux in latest and established models = 0.163781 Jy ! Performing phase self-cal ! Adding 6 model components to the UV plane model. ! The established model now contains 69 components and 0.163781 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.096896Jy sigma=0.000678 ! Fit after self-cal, rms=0.096895Jy sigma=0.000678 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.759 mas, bmaj=8.461 mas, bpa=-1.71 degrees ! Estimated noise=590.194 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.759 x 8.461 at -1.71 degrees (North through East) ! Clean map min=-0.002365 max=0.15404 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.193 mas, bmaj=7.535 mas, bpa=-2.93 degrees ! Estimated noise=902.601 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.117217 Jy ! Component: 100 - total flux cleaned = 0.144671 Jy ! Component: 150 - total flux cleaned = 0.155098 Jy ! Component: 200 - total flux cleaned = 0.16043 Jy ! Total flux subtracted in 200 components = 0.16043 Jy ! Clean residual min=-0.003099 max=0.003526 Jy/beam ! Clean residual mean=0.000006 rms=0.000719 Jy/beam ! Combined flux in latest and established models = 0.160431 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 21 model components to the UV plane model. ! The established model now contains 21 components and 0.160431 Jy ! Inverting map and beam ! Estimated beam: bmin=3.759 mas, bmaj=8.461 mas, bpa=-1.71 degrees ! Estimated noise=590.194 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (3.5, 4.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00292031 Jy ! Component: 100 - total flux cleaned = 0.00379379 Jy ! Component: 150 - total flux cleaned = 0.00428718 Jy ! Component: 200 - total flux cleaned = 0.00442208 Jy ! Total flux subtracted in 200 components = 0.00442208 Jy ! Clean residual min=-0.002247 max=0.002161 Jy/beam ! Clean residual mean=0.000011 rms=0.000578 Jy/beam ! Combined flux in latest and established models = 0.164853 Jy ! Adding 21 model components to the UV plane model. ! The established model now contains 36 components and 0.164853 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.78 mas, bmaj=13.1 mas, bpa=-4.419 degrees ! Estimated noise=688.408 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 9.36386e-06 Jy ! Component: 100 - total flux cleaned = -3.59206e-05 Jy ! Component: 150 - total flux cleaned = -0.00015543 Jy ! Component: 200 - total flux cleaned = -0.000263908 Jy ! Total flux subtracted in 200 components = -0.000263908 Jy ! Clean residual min=-0.003017 max=0.002510 Jy/beam ! Clean residual mean=0.000020 rms=0.000749 Jy/beam ! Combined flux in latest and established models = 0.164589 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -9.74739e-05 Jy ! Component: 100 - total flux cleaned = -0.000185829 Jy ! Component: 150 - total flux cleaned = -0.000239477 Jy ! Component: 200 - total flux cleaned = -0.000314941 Jy ! Total flux subtracted in 200 components = -0.000314941 Jy ! Clean residual min=-0.002995 max=0.002582 Jy/beam ! Clean residual mean=0.000020 rms=0.000744 Jy/beam ! Combined flux in latest and established models = 0.164274 Jy ! Adding 30 model components to the UV plane model. ! The established model now contains 64 components and 0.164274 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.759 mas, bmaj=8.461 mas, bpa=-1.71 degrees ! Estimated noise=590.194 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -2.01465e-05 Jy ! Component: 100 - total flux cleaned = -0.000100124 Jy ! Component: 150 - total flux cleaned = -0.000172064 Jy ! Component: 200 - total flux cleaned = -0.000237145 Jy ! Total flux subtracted in 200 components = -0.000237145 Jy ! Clean residual min=-0.002075 max=0.002039 Jy/beam ! Clean residual mean=0.000010 rms=0.000549 Jy/beam ! Combined flux in latest and established models = 0.164037 Jy selfcal ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 77 components and 0.164037 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.096910Jy sigma=0.000678 ! Fit after self-cal, rms=0.096908Jy sigma=0.000678 wmodel J1632-0033_S_2017_05_27_pus_map.mod ! Writing 77 model components to file: J1632-0033_S_2017_05_27_pus_map.mod wobs J1632-0033_S_2017_05_27_pus_uvs.fits ! Writing UV FITS file: J1632-0033_S_2017_05_27_pus_uvs.fits wwins J1632-0033_S_2017_05_27_pus_map.win ! wwins: Wrote 2 windows to J1632-0033_S_2017_05_27_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.000842636 Jy ! Component: 100 - total flux cleaned = -0.001324 Jy ! Component: 150 - total flux cleaned = -0.0017466 Jy ! Component: 200 - total flux cleaned = -0.00208425 Jy ! Component: 250 - total flux cleaned = -0.00224636 Jy ! Component: 300 - total flux cleaned = -0.002373 Jy ! Component: 350 - total flux cleaned = -0.00252605 Jy ! Component: 400 - total flux cleaned = -0.00273233 Jy ! Component: 450 - total flux cleaned = -0.00278888 Jy ! Component: 500 - total flux cleaned = -0.00284507 Jy ! Component: 550 - total flux cleaned = -0.00287254 Jy ! Component: 600 - total flux cleaned = -0.00292607 Jy ! Component: 650 - total flux cleaned = -0.00292623 Jy ! Component: 700 - total flux cleaned = -0.00295136 Jy ! Component: 750 - total flux cleaned = -0.00292591 Jy ! Component: 800 - total flux cleaned = -0.00287683 Jy ! Component: 850 - total flux cleaned = -0.00282912 Jy ! Component: 900 - total flux cleaned = -0.0028063 Jy ! Component: 950 - total flux cleaned = -0.00271452 Jy ! Component: 1000 - total flux cleaned = -0.0026471 Jy ! Component: 1050 - total flux cleaned = -0.00264742 Jy ! Component: 1100 - total flux cleaned = -0.00262593 Jy ! Component: 1150 - total flux cleaned = -0.00258313 Jy ! Component: 1200 - total flux cleaned = -0.00254132 Jy ! Component: 1250 - total flux cleaned = -0.00247909 Jy ! Component: 1300 - total flux cleaned = -0.00243786 Jy ! Component: 1350 - total flux cleaned = -0.00237697 Jy ! Component: 1400 - total flux cleaned = -0.00227733 Jy ! Component: 1450 - total flux cleaned = -0.0022185 Jy ! Component: 1500 - total flux cleaned = -0.0021409 Jy ! Component: 1550 - total flux cleaned = -0.00212148 Jy ! Component: 1600 - total flux cleaned = -0.00204549 Jy ! Component: 1650 - total flux cleaned = -0.0019895 Jy ! Component: 1700 - total flux cleaned = -0.00187897 Jy ! Component: 1750 - total flux cleaned = -0.00184269 Jy ! Component: 1800 - total flux cleaned = -0.0017705 Jy ! Component: 1850 - total flux cleaned = -0.00162819 Jy ! Component: 1900 - total flux cleaned = -0.00155813 Jy ! Component: 1950 - total flux cleaned = -0.00147137 Jy ! Component: 2000 - total flux cleaned = -0.00143714 Jy ! Component: 2050 - total flux cleaned = -0.00128371 Jy ! Component: 2100 - total flux cleaned = -0.00123332 Jy ! Component: 2150 - total flux cleaned = -0.00113332 Jy ! Component: 2200 - total flux cleaned = -0.0010179 Jy ! Component: 2250 - total flux cleaned = -0.00090383 Jy ! Component: 2300 - total flux cleaned = -0.000855628 Jy ! Component: 2350 - total flux cleaned = -0.000759827 Jy ! Component: 2400 - total flux cleaned = -0.00063343 Jy ! Component: 2450 - total flux cleaned = -0.000586497 Jy ! Component: 2500 - total flux cleaned = -0.000478008 Jy ! Component: 2550 - total flux cleaned = -0.000401082 Jy ! Component: 2600 - total flux cleaned = -0.000340161 Jy ! Component: 2650 - total flux cleaned = -0.00020437 Jy ! Component: 2700 - total flux cleaned = -9.98272e-05 Jy ! Component: 2750 - total flux cleaned = -4.04064e-05 Jy ! Component: 2800 - total flux cleaned = 3.32089e-05 Jy ! Component: 2850 - total flux cleaned = 9.15859e-05 Jy ! Component: 2900 - total flux cleaned = 0.000221489 Jy ! Component: 2950 - total flux cleaned = 0.000292792 Jy ! Component: 3000 - total flux cleaned = 0.000363588 Jy ! Component: 3050 - total flux cleaned = 0.000476099 Jy ! Component: 3100 - total flux cleaned = 0.000517952 Jy ! Component: 3150 - total flux cleaned = 0.000656163 Jy ! Component: 3200 - total flux cleaned = 0.000724537 Jy ! Component: 3250 - total flux cleaned = 0.000724452 Jy ! Component: 3300 - total flux cleaned = 0.000859566 Jy ! Component: 3350 - total flux cleaned = 0.000939892 Jy ! Component: 3400 - total flux cleaned = 0.00101971 Jy ! Component: 3450 - total flux cleaned = 0.00113832 Jy ! Component: 3500 - total flux cleaned = 0.00117779 Jy ! Component: 3550 - total flux cleaned = 0.00124279 Jy ! Component: 3600 - total flux cleaned = 0.00133316 Jy ! Component: 3650 - total flux cleaned = 0.00147388 Jy ! Component: 3700 - total flux cleaned = 0.00149944 Jy ! Component: 3750 - total flux cleaned = 0.00160041 Jy ! Component: 3800 - total flux cleaned = 0.00170067 Jy ! Component: 3850 - total flux cleaned = 0.00175048 Jy ! Component: 3900 - total flux cleaned = 0.00184928 Jy ! Component: 3950 - total flux cleaned = 0.00192278 Jy ! Component: 4000 - total flux cleaned = 0.00200797 Jy ! Component: 4050 - total flux cleaned = 0.00204428 Jy ! Total flux subtracted in 4096 components = 0.00216416 Jy ! Clean residual min=-0.000657 max=0.000650 Jy/beam ! Clean residual mean=0.000006 rms=0.000229 Jy/beam ! Combined flux in latest and established models = 0.166201 Jy keep ! Adding 292 model components to the UV plane model. ! The established model now contains 369 components and 0.166201 Jy ![Exited script file: muppet] wmap "J1632-0033_S_2017_05_27_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.759 x 8.461 at -1.71 degrees (North through East) ! Clean map min=-0.0020031 max=0.15316 Jy/beam ! Writing clean map to FITS file: J1632-0033_S_2017_05_27_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.153156 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000223684 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.438148 0.438148 0.876297 1.75259 3.50519 7.01038 14.0208 28.0415 56.083 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0006 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.153 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.759 x 8.461 at -1.71 degrees (North through East) ! Clean map min=-0.0020031 max=0.15316 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J1632-0033_S_2017_05_27_pus_uvs.log closed on Fri May 3 11:10:48 2019