! Started logfile: J1630+0701_S_2017_04_28_pus_uvs.log on Thu May 2 16:29:41 2019 obs J1630+0701_S_2017_04_28_pus_uva.fits ! Reading UV FITS file: J1630+0701_S_2017_04_28_pus_uva.fits ! AN table 1: 114 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.847368 visibilities/baseline/integration-bin. ! Found source: J1630+0701 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 671 lines of history. ! ! Reading 17388 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J1630+0701_S_2017_04_28_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 94 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 94 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 94 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 548 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.904812Jy sigma=0.034547 ! Fit after self-cal, rms=0.897085Jy sigma=0.034512 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.897 mas, bmaj=7.598 mas, bpa=-10.03 degrees ! Estimated noise=636.25 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0590516 Jy ! Component: 100 - total flux cleaned = 0.0763272 Jy ! Total flux subtracted in 100 components = 0.0763272 Jy ! Clean residual min=-0.019676 max=0.018520 Jy/beam ! Clean residual mean=-0.000087 rms=0.006594 Jy/beam ! Combined flux in latest and established models = 0.0763272 Jy ! Performing phase self-cal ! Adding 8 model components to the UV plane model. ! The established model now contains 8 components and 0.0763272 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.092687Jy sigma=0.002461 ! Fit after self-cal, rms=0.092676Jy sigma=0.002459 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.652 mas, bmaj=8.596 mas, bpa=-8.601 degrees ! Estimated noise=473.605 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000306197 Jy ! Component: 100 - total flux cleaned = -0.000727659 Jy ! Component: 150 - total flux cleaned = -0.00192517 Jy ! Component: 200 - total flux cleaned = -0.00257958 Jy ! Total flux subtracted in 200 components = -0.00257958 Jy ! Clean residual min=-0.020085 max=0.019787 Jy/beam ! Clean residual mean=-0.000291 rms=0.006561 Jy/beam ! Combined flux in latest and established models = 0.0737476 Jy ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 17 components and 0.0737476 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.091198Jy sigma=0.002504 ! Fit after self-cal, rms=0.091166Jy sigma=0.002504 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.87 FD 0.86 HN 0.87 KP 0.78 ! LA 0.74 MK 0.82 NL 0.76 OV 0.79 ! PT 0.80 SC 1.00 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 0.84 FD 0.79 HN 0.90 KP 0.74 ! LA 0.73 MK 0.78 NL 0.91 OV 0.83 ! PT 0.79 SC 1.14 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 0.99 FD 0.82 HN 0.87 KP 0.80 ! LA 0.76 MK 0.83 NL 0.85 OV 0.74 ! PT 0.78 SC 1.09 ! ! ! Correcting IF 4. ! A total of 12 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.97 FD 0.92 HN 0.90 KP 1.00* ! LA 23.99 MK 1.75 NL 1.00* OV 1.00* ! PT 0.89 SC 1.00* ! ! ! Fit before self-cal, rms=0.091166Jy sigma=0.002504 ! Fit after self-cal, rms=0.736123Jy sigma=0.000689 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.682 mas, bmaj=8.28 mas, bpa=-7.406 degrees ! Estimated noise=475.203 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00225958 Jy ! Component: 100 - total flux cleaned = 0.00354808 Jy ! Component: 150 - total flux cleaned = 0.0041104 Jy ! Component: 200 - total flux cleaned = 0.00429077 Jy ! Total flux subtracted in 200 components = 0.00429077 Jy ! Clean residual min=-0.002047 max=0.002396 Jy/beam ! Clean residual mean=-0.000024 rms=0.000532 Jy/beam ! Combined flux in latest and established models = 0.0780383 Jy ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 23 components and 0.0780384 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.735902Jy sigma=0.000689 ! Fit after self-cal, rms=0.736725Jy sigma=0.000681 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.736725Jy sigma=0.000681 ! Fit after self-cal, rms=0.676237Jy sigma=0.000674 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.63 mas, bmaj=8.241 mas, bpa=-7.782 degrees ! Estimated noise=476.764 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00151663 Jy ! Component: 100 - total flux cleaned = 0.00234402 Jy ! Component: 150 - total flux cleaned = 0.00261274 Jy ! Component: 200 - total flux cleaned = 0.00268883 Jy ! Total flux subtracted in 200 components = 0.00268883 Jy ! Clean residual min=-0.001800 max=0.001876 Jy/beam ! Clean residual mean=-0.000022 rms=0.000437 Jy/beam ! Combined flux in latest and established models = 0.0807272 Jy selfcal ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 30 components and 0.0807272 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.676114Jy sigma=0.000674 ! Fit after self-cal, rms=0.676104Jy sigma=0.000673 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-63.5, 54). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00163774 Jy ! Component: 100 - total flux cleaned = 0.00245049 Jy ! Component: 150 - total flux cleaned = 0.00281272 Jy ! Component: 200 - total flux cleaned = 0.00299658 Jy ! Total flux subtracted in 200 components = 0.00299658 Jy ! Clean residual min=-0.001671 max=0.001516 Jy/beam ! Clean residual mean=-0.000022 rms=0.000407 Jy/beam ! Combined flux in latest and established models = 0.0837238 Jy ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 44 components and 0.0837238 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.676051Jy sigma=0.000673 ! Fit after self-cal, rms=0.676049Jy sigma=0.000673 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.676049Jy sigma=0.000673 ! Fit after self-cal, rms=0.062330Jy sigma=0.000666 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.618 mas, bmaj=8.238 mas, bpa=-7.901 degrees ! Estimated noise=477.296 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000429808 Jy ! Component: 100 - total flux cleaned = 0.0005306 Jy ! Component: 150 - total flux cleaned = 0.000571297 Jy ! Component: 200 - total flux cleaned = 0.000589823 Jy ! Total flux subtracted in 200 components = 0.000589823 Jy ! Clean residual min=-0.001154 max=0.001216 Jy/beam ! Clean residual mean=0.000000 rms=0.000305 Jy/beam ! Combined flux in latest and established models = 0.0843136 Jy selfcal ! Performing phase self-cal ! Adding 26 model components to the UV plane model. ! The established model now contains 63 components and 0.0843136 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.062309Jy sigma=0.000666 ! Fit after self-cal, rms=0.062156Jy sigma=0.000665 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000147029 Jy ! Component: 100 - total flux cleaned = 0.000114357 Jy ! Component: 150 - total flux cleaned = 0.000130205 Jy ! Component: 200 - total flux cleaned = 0.000115763 Jy ! Total flux subtracted in 200 components = 0.000115763 Jy ! Clean residual min=-0.001176 max=0.001229 Jy/beam ! Clean residual mean=-0.000000 rms=0.000303 Jy/beam ! Combined flux in latest and established models = 0.0844293 Jy ! Performing phase self-cal ! Adding 22 model components to the UV plane model. ! The established model now contains 72 components and 0.0844293 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.062146Jy sigma=0.000665 ! Fit after self-cal, rms=0.062145Jy sigma=0.000665 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.062145Jy sigma=0.000665 ! Fit after self-cal, rms=0.061760Jy sigma=0.000665 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.844 mas, bmaj=11.65 mas, bpa=-1.112 degrees ! Estimated noise=547.405 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000550395 Jy ! Component: 100 - total flux cleaned = 0.00063747 Jy ! Component: 150 - total flux cleaned = 0.000696483 Jy ! Component: 200 - total flux cleaned = 0.00074704 Jy ! Total flux subtracted in 200 components = 0.00074704 Jy ! Clean residual min=-0.001084 max=0.001394 Jy/beam ! Clean residual mean=0.000004 rms=0.000342 Jy/beam ! Combined flux in latest and established models = 0.0851764 Jy selfcal ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 83 components and 0.0851764 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.061756Jy sigma=0.000665 ! Fit after self-cal, rms=0.061745Jy sigma=0.000665 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 1.0639e-05 Jy ! Component: 100 - total flux cleaned = 1.061e-05 Jy ! Component: 150 - total flux cleaned = 4.36778e-05 Jy ! Component: 200 - total flux cleaned = 7.28413e-05 Jy ! Total flux subtracted in 200 components = 7.28413e-05 Jy ! Clean residual min=-0.001089 max=0.001363 Jy/beam ! Clean residual mean=0.000004 rms=0.000339 Jy/beam ! Combined flux in latest and established models = 0.0852492 Jy ! Performing phase self-cal ! Adding 23 model components to the UV plane model. ! The established model now contains 92 components and 0.0852492 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.061745Jy sigma=0.000665 ! Fit after self-cal, rms=0.061740Jy sigma=0.000665 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.609 mas, bmaj=8.222 mas, bpa=-7.906 degrees ! Estimated noise=477.668 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.609 x 8.222 at -7.906 degrees (North through East) ! Clean map min=-0.0011318 max=0.077942 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.959 mas, bmaj=7.317 mas, bpa=-8.746 degrees ! Estimated noise=628.964 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0589058 Jy ! Component: 100 - total flux cleaned = 0.074125 Jy ! Component: 150 - total flux cleaned = 0.0807319 Jy ! Component: 200 - total flux cleaned = 0.0841096 Jy ! Total flux subtracted in 200 components = 0.0841096 Jy ! Clean residual min=-0.001906 max=0.001798 Jy/beam ! Clean residual mean=0.000002 rms=0.000464 Jy/beam ! Combined flux in latest and established models = 0.0841096 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 13 model components to the UV plane model. ! The established model now contains 13 components and 0.0841096 Jy ! Inverting map and beam ! Estimated beam: bmin=3.609 mas, bmaj=8.222 mas, bpa=-7.906 degrees ! Estimated noise=477.668 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (3, -1.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00137712 Jy ! Component: 100 - total flux cleaned = 0.00185379 Jy ! Component: 150 - total flux cleaned = 0.00211971 Jy ! Component: 200 - total flux cleaned = 0.00223329 Jy ! Total flux subtracted in 200 components = 0.00223329 Jy ! Clean residual min=-0.001187 max=0.001303 Jy/beam ! Clean residual mean=0.000003 rms=0.000312 Jy/beam ! Combined flux in latest and established models = 0.0863429 Jy ! Adding 28 model components to the UV plane model. ! The established model now contains 40 components and 0.0863429 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.844 mas, bmaj=11.65 mas, bpa=-1.112 degrees ! Estimated noise=547.405 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -3.3889e-05 Jy ! Component: 100 - total flux cleaned = -8.1841e-05 Jy ! Component: 150 - total flux cleaned = -0.000101775 Jy ! Component: 200 - total flux cleaned = -0.000138875 Jy ! Total flux subtracted in 200 components = -0.000138875 Jy ! Clean residual min=-0.001087 max=0.001180 Jy/beam ! Clean residual mean=0.000006 rms=0.000335 Jy/beam ! Combined flux in latest and established models = 0.086204 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -5.03575e-05 Jy ! Component: 100 - total flux cleaned = -8.00306e-05 Jy ! Component: 150 - total flux cleaned = -0.000120526 Jy ! Component: 200 - total flux cleaned = -0.000145044 Jy ! Total flux subtracted in 200 components = -0.000145044 Jy ! Clean residual min=-0.001076 max=0.001177 Jy/beam ! Clean residual mean=0.000006 rms=0.000330 Jy/beam ! Combined flux in latest and established models = 0.086059 Jy ! Adding 45 model components to the UV plane model. ! The established model now contains 78 components and 0.086059 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.609 mas, bmaj=8.222 mas, bpa=-7.906 degrees ! Estimated noise=477.668 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 1.89499e-05 Jy ! Component: 100 - total flux cleaned = 4.33797e-05 Jy ! Component: 150 - total flux cleaned = 0.000112708 Jy ! Component: 200 - total flux cleaned = 0.000176389 Jy ! Total flux subtracted in 200 components = 0.000176389 Jy ! Clean residual min=-0.001071 max=0.001173 Jy/beam ! Clean residual mean=0.000003 rms=0.000289 Jy/beam ! Combined flux in latest and established models = 0.0862354 Jy selfcal ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 94 components and 0.0862354 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.061735Jy sigma=0.000665 ! Fit after self-cal, rms=0.061733Jy sigma=0.000665 wmodel J1630+0701_S_2017_04_28_pus_map.mod ! Writing 94 model components to file: J1630+0701_S_2017_04_28_pus_map.mod wobs J1630+0701_S_2017_04_28_pus_uvs.fits ! Writing UV FITS file: J1630+0701_S_2017_04_28_pus_uvs.fits wwins J1630+0701_S_2017_04_28_pus_map.win ! wwins: Wrote 3 windows to J1630+0701_S_2017_04_28_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.000200343 Jy ! Component: 100 - total flux cleaned = 0.000121019 Jy ! Component: 150 - total flux cleaned = -1.23748e-05 Jy ! Component: 200 - total flux cleaned = -4.86715e-05 Jy ! Component: 250 - total flux cleaned = -0.000192407 Jy ! Component: 300 - total flux cleaned = -0.000332368 Jy ! Component: 350 - total flux cleaned = -0.000451998 Jy ! Component: 400 - total flux cleaned = -0.000552012 Jy ! Component: 450 - total flux cleaned = -0.000650345 Jy ! Component: 500 - total flux cleaned = -0.000778813 Jy ! Component: 550 - total flux cleaned = -0.000936066 Jy ! Component: 600 - total flux cleaned = -0.00105987 Jy ! Component: 650 - total flux cleaned = -0.00112081 Jy ! Component: 700 - total flux cleaned = -0.00121065 Jy ! Component: 750 - total flux cleaned = -0.00132824 Jy ! Component: 800 - total flux cleaned = -0.0013573 Jy ! Component: 850 - total flux cleaned = -0.00141439 Jy ! Component: 900 - total flux cleaned = -0.00149881 Jy ! Component: 950 - total flux cleaned = -0.00158185 Jy ! Component: 1000 - total flux cleaned = -0.0015953 Jy ! Component: 1050 - total flux cleaned = -0.0016358 Jy ! Component: 1100 - total flux cleaned = -0.00168906 Jy ! Component: 1150 - total flux cleaned = -0.00171534 Jy ! Component: 1200 - total flux cleaned = -0.00175423 Jy ! Component: 1250 - total flux cleaned = -0.00178007 Jy ! Component: 1300 - total flux cleaned = -0.00181831 Jy ! Component: 1350 - total flux cleaned = -0.00183117 Jy ! Component: 1400 - total flux cleaned = -0.00194262 Jy ! Component: 1450 - total flux cleaned = -0.00195486 Jy ! Component: 1500 - total flux cleaned = -0.00199118 Jy ! Component: 1550 - total flux cleaned = -0.00207483 Jy ! Component: 1600 - total flux cleaned = -0.00209822 Jy ! Component: 1650 - total flux cleaned = -0.00214489 Jy ! Component: 1700 - total flux cleaned = -0.00215642 Jy ! Component: 1750 - total flux cleaned = -0.00221383 Jy ! Component: 1800 - total flux cleaned = -0.00227044 Jy ! Component: 1850 - total flux cleaned = -0.00229281 Jy ! Component: 1900 - total flux cleaned = -0.00231511 Jy ! Component: 1950 - total flux cleaned = -0.00235909 Jy ! Component: 2000 - total flux cleaned = -0.00239173 Jy ! Component: 2050 - total flux cleaned = -0.00241344 Jy ! Component: 2100 - total flux cleaned = -0.00243486 Jy ! Component: 2150 - total flux cleaned = -0.00246665 Jy ! Component: 2200 - total flux cleaned = -0.0024981 Jy ! Component: 2250 - total flux cleaned = -0.0025398 Jy ! Component: 2300 - total flux cleaned = -0.00258111 Jy ! Component: 2350 - total flux cleaned = -0.00257091 Jy ! Component: 2400 - total flux cleaned = -0.00261153 Jy ! Component: 2450 - total flux cleaned = -0.00266172 Jy ! Component: 2500 - total flux cleaned = -0.00267165 Jy ! Component: 2550 - total flux cleaned = -0.00270123 Jy ! Component: 2600 - total flux cleaned = -0.00271092 Jy ! Component: 2650 - total flux cleaned = -0.00273046 Jy ! Component: 2700 - total flux cleaned = -0.00273039 Jy ! Component: 2750 - total flux cleaned = -0.00273987 Jy ! Component: 2800 - total flux cleaned = -0.00274937 Jy ! Component: 2850 - total flux cleaned = -0.00273997 Jy ! Component: 2900 - total flux cleaned = -0.00274939 Jy ! Component: 2950 - total flux cleaned = -0.00276801 Jy ! Component: 3000 - total flux cleaned = -0.00275887 Jy ! Component: 3050 - total flux cleaned = -0.00275895 Jy ! Component: 3100 - total flux cleaned = -0.00274992 Jy ! Component: 3150 - total flux cleaned = -0.00275889 Jy ! Component: 3200 - total flux cleaned = -0.00274987 Jy ! Component: 3250 - total flux cleaned = -0.00270549 Jy ! Component: 3300 - total flux cleaned = -0.00269669 Jy ! Component: 3350 - total flux cleaned = -0.00270536 Jy ! Component: 3400 - total flux cleaned = -0.00270537 Jy ! Component: 3450 - total flux cleaned = -0.00271401 Jy ! Component: 3500 - total flux cleaned = -0.00271403 Jy ! Component: 3550 - total flux cleaned = -0.00271401 Jy ! Component: 3600 - total flux cleaned = -0.00273951 Jy ! Component: 3650 - total flux cleaned = -0.00273942 Jy ! Component: 3700 - total flux cleaned = -0.00270586 Jy ! Component: 3750 - total flux cleaned = -0.00274767 Jy ! Component: 3800 - total flux cleaned = -0.00272283 Jy ! Component: 3850 - total flux cleaned = -0.00273113 Jy ! Component: 3900 - total flux cleaned = -0.00273119 Jy ! Component: 3950 - total flux cleaned = -0.00275573 Jy ! Component: 4000 - total flux cleaned = -0.00274763 Jy ! Component: 4050 - total flux cleaned = -0.00276377 Jy ! Total flux subtracted in 4096 components = -0.00273159 Jy ! Clean residual min=-0.000480 max=0.000447 Jy/beam ! Clean residual mean=-0.000000 rms=0.000151 Jy/beam ! Combined flux in latest and established models = 0.0835038 Jy keep ! Adding 272 model components to the UV plane model. ! The established model now contains 366 components and 0.0835038 Jy ![Exited script file: muppet] wmap "J1630+0701_S_2017_04_28_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.609 x 8.222 at -7.906 degrees (North through East) ! Clean map min=-0.0009502 max=0.077149 Jy/beam ! Writing clean map to FITS file: J1630+0701_S_2017_04_28_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.0771493 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000149379 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.580869 0.580869 1.16174 2.32348 4.64695 9.29391 18.5878 37.1756 74.3512 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0004 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.077 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.609 x 8.222 at -7.906 degrees (North through East) ! Clean map min=-0.0009502 max=0.077149 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J1630+0701_S_2017_04_28_pus_uvs.log closed on Thu May 2 16:29:46 2019