! Started logfile: J1630+0015_S_2017_05_01_pus_uvs.log on Wed May 1 18:40:19 2019 obs J1630+0015_S_2017_05_01_pus_uva.fits ! Reading UV FITS file: J1630+0015_S_2017_05_01_pus_uva.fits ! AN table 1: 114 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.969201 visibilities/baseline/integration-bin. ! Found source: J1630+0015 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 788 lines of history. ! ! Reading 19888 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J1630+0015_S_2017_05_01_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 20 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 20 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 20 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 602 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.990121Jy sigma=0.007663 ! Fit after self-cal, rms=0.947018Jy sigma=0.007366 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.859 mas, bmaj=7.023 mas, bpa=-5.759 degrees ! Estimated noise=1039.26 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0449485 Jy ! Component: 100 - total flux cleaned = 0.0547522 Jy ! Total flux subtracted in 100 components = 0.0547522 Jy ! Clean residual min=-0.003313 max=0.002901 Jy/beam ! Clean residual mean=0.000001 rms=0.000727 Jy/beam ! Combined flux in latest and established models = 0.0547522 Jy ! Performing phase self-cal ! Adding 2 model components to the UV plane model. ! The established model now contains 2 components and 0.0547522 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.099553Jy sigma=0.000669 ! Fit after self-cal, rms=0.098824Jy sigma=0.000664 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.408 mas, bmaj=7.831 mas, bpa=-3.43 degrees ! Estimated noise=735.709 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00234271 Jy ! Component: 100 - total flux cleaned = 0.00218583 Jy ! Component: 150 - total flux cleaned = 0.00214568 Jy ! Component: 200 - total flux cleaned = 0.0020795 Jy ! Total flux subtracted in 200 components = 0.0020795 Jy ! Clean residual min=-0.002464 max=0.002183 Jy/beam ! Clean residual mean=-0.000005 rms=0.000543 Jy/beam ! Combined flux in latest and established models = 0.0568317 Jy ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 17 components and 0.0568317 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.098684Jy sigma=0.000663 ! Fit after self-cal, rms=0.098656Jy sigma=0.000663 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.99 FD 0.90 HN 1.04 KP 1.00 ! LA 0.99 MK 1.01 NL 0.96 OV 1.10 ! PT 1.02 SC 0.97 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 0.99 FD 0.92 HN 1.01 KP 0.98 ! LA 1.05 MK 1.00 NL 1.22 OV 1.08 ! PT 0.98 SC 1.05 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 0.99 FD 0.97 HN 1.03 KP 1.02 ! LA 0.99 MK 1.01 NL 1.02 OV 0.97 ! PT 1.00 SC 1.01 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 0.94 FD 0.93 HN 0.82 KP 1.00* ! LA 1.00* MK 0.93 NL 1.00* OV 1.00* ! PT 0.95 SC 1.00* ! ! ! Fit before self-cal, rms=0.098656Jy sigma=0.000663 ! Fit after self-cal, rms=0.099752Jy sigma=0.000662 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.406 mas, bmaj=7.828 mas, bpa=-3.556 degrees ! Estimated noise=736.669 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000181698 Jy ! Component: 100 - total flux cleaned = 0.000143063 Jy ! Component: 150 - total flux cleaned = 0.000158814 Jy ! Component: 200 - total flux cleaned = 0.000157693 Jy ! Total flux subtracted in 200 components = 0.000157693 Jy ! Clean residual min=-0.002250 max=0.002083 Jy/beam ! Clean residual mean=-0.000005 rms=0.000511 Jy/beam ! Combined flux in latest and established models = 0.0569894 Jy ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 23 components and 0.0569894 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.099735Jy sigma=0.000662 ! Fit after self-cal, rms=0.099757Jy sigma=0.000662 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.099757Jy sigma=0.000662 ! Fit after self-cal, rms=0.100232Jy sigma=0.000661 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.409 mas, bmaj=7.839 mas, bpa=-3.664 degrees ! Estimated noise=739.933 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 5.13123e-05 Jy ! Component: 100 - total flux cleaned = 1.22231e-05 Jy ! Component: 150 - total flux cleaned = -2.1977e-05 Jy ! Component: 200 - total flux cleaned = -3.20805e-05 Jy ! Total flux subtracted in 200 components = -3.20805e-05 Jy ! Clean residual min=-0.002026 max=0.002101 Jy/beam ! Clean residual mean=-0.000007 rms=0.000489 Jy/beam ! Combined flux in latest and established models = 0.0569573 Jy selfcal ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 26 components and 0.0569573 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.100224Jy sigma=0.000661 ! Fit after self-cal, rms=0.100234Jy sigma=0.000660 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 1.52003e-05 Jy ! Component: 100 - total flux cleaned = -1.75559e-05 Jy ! Component: 150 - total flux cleaned = -2.75346e-05 Jy ! Component: 200 - total flux cleaned = -4.66022e-05 Jy ! Total flux subtracted in 200 components = -4.66022e-05 Jy ! Clean residual min=-0.002062 max=0.001999 Jy/beam ! Clean residual mean=-0.000006 rms=0.000491 Jy/beam ! Combined flux in latest and established models = 0.0569107 Jy ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 30 components and 0.0569107 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.100229Jy sigma=0.000660 ! Fit after self-cal, rms=0.100229Jy sigma=0.000660 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.100229Jy sigma=0.000660 ! Fit after self-cal, rms=0.097145Jy sigma=0.000660 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.425 mas, bmaj=7.846 mas, bpa=-3.714 degrees ! Estimated noise=740.879 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000202248 Jy ! Component: 100 - total flux cleaned = -0.000179041 Jy ! Component: 150 - total flux cleaned = -0.000179108 Jy ! Component: 200 - total flux cleaned = -0.000169164 Jy ! Total flux subtracted in 200 components = -0.000169164 Jy ! Clean residual min=-0.002046 max=0.001832 Jy/beam ! Clean residual mean=-0.000002 rms=0.000462 Jy/beam ! Combined flux in latest and established models = 0.0567415 Jy selfcal ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 34 components and 0.0567416 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.097141Jy sigma=0.000660 ! Fit after self-cal, rms=0.097133Jy sigma=0.000659 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -5.95023e-05 Jy ! Component: 100 - total flux cleaned = -4.98717e-05 Jy ! Component: 150 - total flux cleaned = -4.07829e-05 Jy ! Component: 200 - total flux cleaned = -4.07726e-05 Jy ! Total flux subtracted in 200 components = -4.07726e-05 Jy ! Clean residual min=-0.002035 max=0.001802 Jy/beam ! Clean residual mean=-0.000003 rms=0.000460 Jy/beam ! Combined flux in latest and established models = 0.0567008 Jy ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 37 components and 0.0567008 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.097131Jy sigma=0.000659 ! Fit after self-cal, rms=0.097131Jy sigma=0.000659 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.097131Jy sigma=0.000659 ! Fit after self-cal, rms=0.097129Jy sigma=0.000659 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.805 mas, bmaj=12.15 mas, bpa=3.598 degrees ! Estimated noise=884.289 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000150267 Jy ! Component: 100 - total flux cleaned = -0.000211566 Jy ! Component: 150 - total flux cleaned = -0.000258015 Jy ! Component: 200 - total flux cleaned = -0.000301277 Jy ! Total flux subtracted in 200 components = -0.000301277 Jy ! Clean residual min=-0.002177 max=0.001695 Jy/beam ! Clean residual mean=-0.000005 rms=0.000523 Jy/beam ! Combined flux in latest and established models = 0.0563995 Jy selfcal ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 49 components and 0.0563995 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.097133Jy sigma=0.000659 ! Fit after self-cal, rms=0.097144Jy sigma=0.000659 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -5.87816e-06 Jy ! Component: 100 - total flux cleaned = -5.66493e-05 Jy ! Component: 150 - total flux cleaned = -5.6886e-05 Jy ! Component: 200 - total flux cleaned = -5.70173e-05 Jy ! Total flux subtracted in 200 components = -5.70173e-05 Jy ! Clean residual min=-0.002165 max=0.001693 Jy/beam ! Clean residual mean=-0.000005 rms=0.000522 Jy/beam ! Combined flux in latest and established models = 0.0563425 Jy ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 54 components and 0.0563425 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.097148Jy sigma=0.000659 ! Fit after self-cal, rms=0.097148Jy sigma=0.000659 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.433 mas, bmaj=7.854 mas, bpa=-3.66 degrees ! Estimated noise=740.923 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.433 x 7.854 at -3.66 degrees (North through East) ! Clean map min=-0.001948 max=0.059349 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.878 mas, bmaj=7.073 mas, bpa=-6.141 degrees ! Estimated noise=1041.3 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0461139 Jy ! Component: 100 - total flux cleaned = 0.0561698 Jy ! Component: 150 - total flux cleaned = 0.0572234 Jy ! Component: 200 - total flux cleaned = 0.0571719 Jy ! Total flux subtracted in 200 components = 0.0571719 Jy ! Clean residual min=-0.002440 max=0.002671 Jy/beam ! Clean residual mean=0.000001 rms=0.000603 Jy/beam ! Combined flux in latest and established models = 0.0571719 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 6 model components to the UV plane model. ! The established model now contains 6 components and 0.0571719 Jy ! Inverting map and beam ! Estimated beam: bmin=3.433 mas, bmaj=7.854 mas, bpa=-3.66 degrees ! Estimated noise=740.923 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000144317 Jy ! Component: 100 - total flux cleaned = -0.000294309 Jy ! Component: 150 - total flux cleaned = -0.000370154 Jy ! Component: 200 - total flux cleaned = -0.000458283 Jy ! Total flux subtracted in 200 components = -0.000458283 Jy ! Clean residual min=-0.002014 max=0.001862 Jy/beam ! Clean residual mean=-0.000002 rms=0.000462 Jy/beam ! Combined flux in latest and established models = 0.0567136 Jy ! Adding 11 model components to the UV plane model. ! The established model now contains 15 components and 0.0567136 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.805 mas, bmaj=12.15 mas, bpa=3.598 degrees ! Estimated noise=884.289 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000133405 Jy ! Component: 100 - total flux cleaned = -0.000239089 Jy ! Component: 150 - total flux cleaned = -0.000317743 Jy ! Component: 200 - total flux cleaned = -0.000342025 Jy ! Total flux subtracted in 200 components = -0.000342025 Jy ! Clean residual min=-0.002149 max=0.001694 Jy/beam ! Clean residual mean=-0.000005 rms=0.000522 Jy/beam ! Combined flux in latest and established models = 0.0563716 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -2.95098e-05 Jy ! Component: 100 - total flux cleaned = -4.58101e-05 Jy ! Component: 150 - total flux cleaned = -5.21441e-05 Jy ! Component: 200 - total flux cleaned = -5.84137e-05 Jy ! Total flux subtracted in 200 components = -5.84137e-05 Jy ! Clean residual min=-0.002145 max=0.001681 Jy/beam ! Clean residual mean=-0.000005 rms=0.000522 Jy/beam ! Combined flux in latest and established models = 0.0563131 Jy ! Adding 23 model components to the UV plane model. ! The established model now contains 38 components and 0.0563131 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.433 mas, bmaj=7.854 mas, bpa=-3.66 degrees ! Estimated noise=740.923 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 5.78257e-05 Jy ! Component: 100 - total flux cleaned = 0.000174989 Jy ! Component: 150 - total flux cleaned = 0.000175452 Jy ! Component: 200 - total flux cleaned = 0.000158877 Jy ! Total flux subtracted in 200 components = 0.000158877 Jy ! Clean residual min=-0.002035 max=0.001816 Jy/beam ! Clean residual mean=-0.000002 rms=0.000459 Jy/beam ! Combined flux in latest and established models = 0.056472 Jy selfcal ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 48 components and 0.056472 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.097151Jy sigma=0.000659 ! Fit after self-cal, rms=0.097148Jy sigma=0.000659 wmodel J1630+0015_S_2017_05_01_pus_map.mod ! Writing 48 model components to file: J1630+0015_S_2017_05_01_pus_map.mod wobs J1630+0015_S_2017_05_01_pus_uvs.fits ! Writing UV FITS file: J1630+0015_S_2017_05_01_pus_uvs.fits wwins J1630+0015_S_2017_05_01_pus_map.win ! wwins: Wrote 1 windows to J1630+0015_S_2017_05_01_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.000335775 Jy ! Component: 100 - total flux cleaned = -0.00046593 Jy ! Component: 150 - total flux cleaned = -0.000374688 Jy ! Component: 200 - total flux cleaned = -0.000286619 Jy ! Component: 250 - total flux cleaned = -0.000229653 Jy ! Component: 300 - total flux cleaned = -0.000201882 Jy ! Component: 350 - total flux cleaned = -9.34078e-05 Jy ! Component: 400 - total flux cleaned = -4.09924e-05 Jy ! Component: 450 - total flux cleaned = 6.30533e-05 Jy ! Component: 500 - total flux cleaned = 0.00019018 Jy ! Component: 550 - total flux cleaned = 0.000215191 Jy ! Component: 600 - total flux cleaned = 0.000264477 Jy ! Component: 650 - total flux cleaned = 0.000361556 Jy ! Component: 700 - total flux cleaned = 0.000480213 Jy ! Component: 750 - total flux cleaned = 0.000597066 Jy ! Component: 800 - total flux cleaned = 0.000666276 Jy ! Component: 850 - total flux cleaned = 0.000757088 Jy ! Component: 900 - total flux cleaned = 0.000757437 Jy ! Component: 950 - total flux cleaned = 0.000868611 Jy ! Component: 1000 - total flux cleaned = 0.000977705 Jy ! Component: 1050 - total flux cleaned = 0.000912837 Jy ! Component: 1100 - total flux cleaned = 0.000955644 Jy ! Component: 1150 - total flux cleaned = 0.000955818 Jy ! Component: 1200 - total flux cleaned = 0.000935412 Jy ! Component: 1250 - total flux cleaned = 0.00101807 Jy ! Component: 1300 - total flux cleaned = 0.00103852 Jy ! Component: 1350 - total flux cleaned = 0.00107905 Jy ! Component: 1400 - total flux cleaned = 0.00117875 Jy ! Component: 1450 - total flux cleaned = 0.00111952 Jy ! Component: 1500 - total flux cleaned = 0.00123705 Jy ! Component: 1550 - total flux cleaned = 0.00135361 Jy ! Component: 1600 - total flux cleaned = 0.00135369 Jy ! Component: 1650 - total flux cleaned = 0.00142991 Jy ! Component: 1700 - total flux cleaned = 0.00158079 Jy ! Component: 1750 - total flux cleaned = 0.0015808 Jy ! Component: 1800 - total flux cleaned = 0.00172881 Jy ! Component: 1850 - total flux cleaned = 0.00178391 Jy ! Component: 1900 - total flux cleaned = 0.00183858 Jy ! Component: 1950 - total flux cleaned = 0.00191083 Jy ! Component: 2000 - total flux cleaned = 0.00200013 Jy ! Component: 2050 - total flux cleaned = 0.00207109 Jy ! Component: 2100 - total flux cleaned = 0.0021237 Jy ! Component: 2150 - total flux cleaned = 0.0021235 Jy ! Component: 2200 - total flux cleaned = 0.00219306 Jy ! Component: 2250 - total flux cleaned = 0.00227913 Jy ! Component: 2300 - total flux cleaned = 0.0023987 Jy ! Component: 2350 - total flux cleaned = 0.00248334 Jy ! Component: 2400 - total flux cleaned = 0.00251686 Jy ! Component: 2450 - total flux cleaned = 0.00256719 Jy ! Component: 2500 - total flux cleaned = 0.00268342 Jy ! Component: 2550 - total flux cleaned = 0.00274925 Jy ! Component: 2600 - total flux cleaned = 0.00274934 Jy ! Component: 2650 - total flux cleaned = 0.00286313 Jy ! Component: 2700 - total flux cleaned = 0.00289548 Jy ! Component: 2750 - total flux cleaned = 0.00294358 Jy ! Component: 2800 - total flux cleaned = 0.00305498 Jy ! Component: 2850 - total flux cleaned = 0.0031025 Jy ! Component: 2900 - total flux cleaned = 0.00313382 Jy ! Component: 2950 - total flux cleaned = 0.00324321 Jy ! Component: 3000 - total flux cleaned = 0.00327405 Jy ! Component: 3050 - total flux cleaned = 0.0033202 Jy ! Component: 3100 - total flux cleaned = 0.0033967 Jy ! Component: 3150 - total flux cleaned = 0.0034425 Jy ! Component: 3200 - total flux cleaned = 0.00350298 Jy ! Component: 3250 - total flux cleaned = 0.00350293 Jy ! Component: 3300 - total flux cleaned = 0.00360725 Jy ! Component: 3350 - total flux cleaned = 0.00360713 Jy ! Component: 3400 - total flux cleaned = 0.00369547 Jy ! Component: 3450 - total flux cleaned = 0.00375402 Jy ! Component: 3500 - total flux cleaned = 0.00376873 Jy ! Component: 3550 - total flux cleaned = 0.003812 Jy ! Component: 3600 - total flux cleaned = 0.00388389 Jy ! Component: 3650 - total flux cleaned = 0.00391227 Jy ! Component: 3700 - total flux cleaned = 0.0039122 Jy ! Component: 3750 - total flux cleaned = 0.00394057 Jy ! Component: 3800 - total flux cleaned = 0.00401064 Jy ! Component: 3850 - total flux cleaned = 0.0040526 Jy ! Component: 3900 - total flux cleaned = 0.00409414 Jy ! Component: 3950 - total flux cleaned = 0.0040804 Jy ! Component: 4000 - total flux cleaned = 0.00420392 Jy ! Component: 4050 - total flux cleaned = 0.00423119 Jy ! Total flux subtracted in 4096 components = 0.00424477 Jy ! Clean residual min=-0.000932 max=0.000824 Jy/beam ! Clean residual mean=-0.000001 rms=0.000253 Jy/beam ! Combined flux in latest and established models = 0.0607168 Jy keep ! Adding 281 model components to the UV plane model. ! The established model now contains 329 components and 0.0607167 Jy ![Exited script file: muppet] wmap "J1630+0015_S_2017_05_01_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.433 x 7.854 at -3.66 degrees (North through East) ! Clean map min=-0.0013514 max=0.059315 Jy/beam ! Writing clean map to FITS file: J1630+0015_S_2017_05_01_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.0593146 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000252923 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -1.27923 1.27923 2.55846 5.11691 10.2338 20.4677 40.9353 81.8706 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0007 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.059 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.433 x 7.854 at -3.66 degrees (North through East) ! Clean map min=-0.0013514 max=0.059315 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J1630+0015_S_2017_05_01_pus_uvs.log closed on Wed May 1 18:40:23 2019