! Started logfile: J1629-2026_S_2017_10_21_pus_uvs.log on Sat May 11 21:02:17 2019 obs J1629-2026_S_2017_10_21_pus_uva.fits ! Reading UV FITS file: J1629-2026_S_2017_10_21_pus_uva.fits ! AN table 1: 73 integrations on 36 of 36 possible baselines. ! Apparent sampling: 0.984018 visibilities/baseline/integration-bin. ! Found source: J1629-2026 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 644 lines of history. ! ! Reading 10344 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J1629-2026_S_2017_10_21_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 6 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 79 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 6 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 371 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.936157Jy sigma=0.007408 ! Fit after self-cal, rms=0.900953Jy sigma=0.007110 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.912 mas, bmaj=15.34 mas, bpa=-17.65 degrees ! Estimated noise=1535.22 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.075727 Jy ! Component: 100 - total flux cleaned = 0.104679 Jy ! Total flux subtracted in 100 components = 0.104679 Jy ! Clean residual min=-0.009054 max=0.013947 Jy/beam ! Clean residual mean=-0.000015 rms=0.003220 Jy/beam ! Combined flux in latest and established models = 0.104679 Jy ! Performing phase self-cal ! Adding 29 model components to the UV plane model. ! The established model now contains 29 components and 0.104679 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.108429Jy sigma=0.000771 ! Fit after self-cal, rms=0.108149Jy sigma=0.000768 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.338 mas, bmaj=17.9 mas, bpa=-18.12 degrees ! Estimated noise=1053.78 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0247413 Jy ! Component: 100 - total flux cleaned = 0.0380209 Jy ! Component: 150 - total flux cleaned = 0.0464844 Jy ! Component: 200 - total flux cleaned = 0.0522692 Jy ! Total flux subtracted in 200 components = 0.0522692 Jy ! Clean residual min=-0.005009 max=0.006135 Jy/beam ! Clean residual mean=-0.000031 rms=0.001691 Jy/beam ! Combined flux in latest and established models = 0.156948 Jy ! Performing phase self-cal ! Adding 101 model components to the UV plane model. ! The established model now contains 122 components and 0.156948 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.102614Jy sigma=0.000716 ! Fit after self-cal, rms=0.102590Jy sigma=0.000715 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.15 FD 0.90 HN 1.03 KP 1.10 ! LA 0.97 MK 1.11 NL 0.92 OV 0.94 ! PT 0.98 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 0.93 HN 1.09 KP 1.05 ! LA 0.97 MK 1.03 NL 1.02 OV 1.03 ! PT 0.95 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 1.37 FD 1.00 HN 1.08 KP 1.04 ! LA 0.76 MK 0.96 NL 1.19 OV 0.94 ! PT 0.91 ! ! ! Correcting IF 4. ! A total of 6 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.12 HN 0.93 KP 1.00* ! LA 0.82 MK 1.00* NL 1.00* OV 1.00* ! PT 0.87 ! ! ! Fit before self-cal, rms=0.102590Jy sigma=0.000715 ! Fit after self-cal, rms=0.107169Jy sigma=0.000705 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.397 mas, bmaj=18.5 mas, bpa=-18.14 degrees ! Estimated noise=1051.95 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -2.21608e-06 Jy ! Component: 100 - total flux cleaned = -0.000360238 Jy ! Component: 150 - total flux cleaned = -0.000484903 Jy ! Component: 200 - total flux cleaned = -0.000553583 Jy ! Total flux subtracted in 200 components = -0.000553583 Jy ! Clean residual min=-0.003021 max=0.003211 Jy/beam ! Clean residual mean=-0.000008 rms=0.000843 Jy/beam ! Combined flux in latest and established models = 0.156395 Jy ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 135 components and 0.156395 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.107120Jy sigma=0.000705 ! Fit after self-cal, rms=0.107231Jy sigma=0.000704 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.107231Jy sigma=0.000704 ! Fit after self-cal, rms=0.107156Jy sigma=0.000704 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.373 mas, bmaj=18.51 mas, bpa=-18.18 degrees ! Estimated noise=1041.58 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000367308 Jy ! Component: 100 - total flux cleaned = -0.000530048 Jy ! Component: 150 - total flux cleaned = -0.000601481 Jy ! Component: 200 - total flux cleaned = -0.000634097 Jy ! Total flux subtracted in 200 components = -0.000634097 Jy ! Clean residual min=-0.002804 max=0.003190 Jy/beam ! Clean residual mean=-0.000007 rms=0.000809 Jy/beam ! Combined flux in latest and established models = 0.15576 Jy selfcal ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 140 components and 0.15576 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.107120Jy sigma=0.000704 ! Fit after self-cal, rms=0.107129Jy sigma=0.000704 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000196836 Jy ! Component: 100 - total flux cleaned = -0.000229257 Jy ! Component: 150 - total flux cleaned = -0.000259746 Jy ! Component: 200 - total flux cleaned = -0.000286796 Jy ! Total flux subtracted in 200 components = -0.000286796 Jy ! Clean residual min=-0.002768 max=0.003177 Jy/beam ! Clean residual mean=-0.000007 rms=0.000795 Jy/beam ! Combined flux in latest and established models = 0.155474 Jy ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 145 components and 0.155474 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.107109Jy sigma=0.000704 ! Fit after self-cal, rms=0.107106Jy sigma=0.000704 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.107106Jy sigma=0.000704 ! Fit after self-cal, rms=0.107124Jy sigma=0.000704 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.351 mas, bmaj=18.52 mas, bpa=-18.21 degrees ! Estimated noise=1032.18 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000404502 Jy ! Component: 100 - total flux cleaned = -0.000433999 Jy ! Component: 150 - total flux cleaned = -0.000461182 Jy ! Component: 200 - total flux cleaned = -0.000486906 Jy ! Total flux subtracted in 200 components = -0.000486906 Jy ! Clean residual min=-0.002564 max=0.003097 Jy/beam ! Clean residual mean=-0.000006 rms=0.000766 Jy/beam ! Combined flux in latest and established models = 0.154987 Jy selfcal ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 147 components and 0.154987 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.107102Jy sigma=0.000704 ! Fit after self-cal, rms=0.107106Jy sigma=0.000704 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000200225 Jy ! Component: 100 - total flux cleaned = -0.000200048 Jy ! Component: 150 - total flux cleaned = -0.000200344 Jy ! Component: 200 - total flux cleaned = -0.000200486 Jy ! Total flux subtracted in 200 components = -0.000200486 Jy ! Clean residual min=-0.002517 max=0.003082 Jy/beam ! Clean residual mean=-0.000006 rms=0.000756 Jy/beam ! Combined flux in latest and established models = 0.154786 Jy ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 148 components and 0.154786 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.107094Jy sigma=0.000703 ! Fit after self-cal, rms=0.107091Jy sigma=0.000703 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.107091Jy sigma=0.000703 ! Fit after self-cal, rms=0.107171Jy sigma=0.000703 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.768 mas, bmaj=25.75 mas, bpa=-7.628 degrees ! Estimated noise=1224.89 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000122447 Jy ! Component: 100 - total flux cleaned = -0.000206129 Jy ! Component: 150 - total flux cleaned = -0.000260956 Jy ! Component: 200 - total flux cleaned = -0.000312545 Jy ! Total flux subtracted in 200 components = -0.000312545 Jy ! Clean residual min=-0.002262 max=0.002889 Jy/beam ! Clean residual mean=-0.000009 rms=0.000754 Jy/beam ! Combined flux in latest and established models = 0.154474 Jy selfcal ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 156 components and 0.154474 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.107160Jy sigma=0.000703 ! Fit after self-cal, rms=0.107166Jy sigma=0.000703 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000103665 Jy ! Component: 100 - total flux cleaned = -8.73393e-05 Jy ! Component: 150 - total flux cleaned = -0.000101451 Jy ! Component: 200 - total flux cleaned = -0.00011519 Jy ! Total flux subtracted in 200 components = -0.00011519 Jy ! Clean residual min=-0.002237 max=0.002850 Jy/beam ! Clean residual mean=-0.000009 rms=0.000745 Jy/beam ! Combined flux in latest and established models = 0.154359 Jy ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 159 components and 0.154359 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.107161Jy sigma=0.000703 ! Fit after self-cal, rms=0.107157Jy sigma=0.000703 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.333 mas, bmaj=18.53 mas, bpa=-18.24 degrees ! Estimated noise=1024.93 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.333 x 18.53 at -18.24 degrees (North through East) ! Clean map min=-0.0023566 max=0.095194 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.89 mas, bmaj=15.95 mas, bpa=-17.76 degrees ! Estimated noise=1525.9 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0750374 Jy ! Component: 100 - total flux cleaned = 0.105266 Jy ! Component: 150 - total flux cleaned = 0.122201 Jy ! Component: 200 - total flux cleaned = 0.132619 Jy ! Total flux subtracted in 200 components = 0.132619 Jy ! Clean residual min=-0.006307 max=0.006628 Jy/beam ! Clean residual mean=-0.000004 rms=0.001677 Jy/beam ! Combined flux in latest and established models = 0.132619 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 50 model components to the UV plane model. ! The established model now contains 50 components and 0.132619 Jy ! Inverting map and beam ! Estimated beam: bmin=3.333 mas, bmaj=18.53 mas, bpa=-18.24 degrees ! Estimated noise=1024.93 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00963772 Jy ! Component: 100 - total flux cleaned = 0.0148991 Jy ! Component: 150 - total flux cleaned = 0.017694 Jy ! Component: 200 - total flux cleaned = 0.0184775 Jy ! Total flux subtracted in 200 components = 0.0184775 Jy ! Clean residual min=-0.003640 max=0.002921 Jy/beam ! Clean residual mean=-0.000006 rms=0.000872 Jy/beam ! Combined flux in latest and established models = 0.151097 Jy ! Adding 45 model components to the UV plane model. ! The established model now contains 93 components and 0.151097 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.768 mas, bmaj=25.75 mas, bpa=-7.628 degrees ! Estimated noise=1224.89 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0021286 Jy ! Component: 100 - total flux cleaned = 0.00243445 Jy ! Component: 150 - total flux cleaned = 0.00246838 Jy ! Component: 200 - total flux cleaned = 0.00249741 Jy ! Total flux subtracted in 200 components = 0.00249741 Jy ! Clean residual min=-0.002550 max=0.002739 Jy/beam ! Clean residual mean=-0.000009 rms=0.000761 Jy/beam ! Combined flux in latest and established models = 0.153594 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 2.67868e-05 Jy ! Component: 100 - total flux cleaned = 5.06488e-05 Jy ! Component: 150 - total flux cleaned = 7.22384e-05 Jy ! Component: 200 - total flux cleaned = 9.20247e-05 Jy ! Total flux subtracted in 200 components = 9.20247e-05 Jy ! Clean residual min=-0.002447 max=0.002732 Jy/beam ! Clean residual mean=-0.000009 rms=0.000746 Jy/beam ! Combined flux in latest and established models = 0.153686 Jy ! Adding 41 model components to the UV plane model. ! The established model now contains 123 components and 0.153686 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.333 mas, bmaj=18.53 mas, bpa=-18.24 degrees ! Estimated noise=1024.93 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00071477 Jy ! Component: 100 - total flux cleaned = -0.000860158 Jy ! Component: 150 - total flux cleaned = -0.000902637 Jy ! Component: 200 - total flux cleaned = -0.00086429 Jy ! Total flux subtracted in 200 components = -0.00086429 Jy ! Clean residual min=-0.002811 max=0.003120 Jy/beam ! Clean residual mean=-0.000006 rms=0.000763 Jy/beam ! Combined flux in latest and established models = 0.152822 Jy selfcal ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 137 components and 0.152822 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.107225Jy sigma=0.000704 ! Fit after self-cal, rms=0.107179Jy sigma=0.000704 wmodel J1629-2026_S_2017_10_21_pus_map.mod ! Writing 137 model components to file: J1629-2026_S_2017_10_21_pus_map.mod wobs J1629-2026_S_2017_10_21_pus_uvs.fits ! Writing UV FITS file: J1629-2026_S_2017_10_21_pus_uvs.fits wwins J1629-2026_S_2017_10_21_pus_map.win ! wwins: Wrote 1 windows to J1629-2026_S_2017_10_21_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.000505537 Jy ! Component: 100 - total flux cleaned = 0.000691471 Jy ! Component: 150 - total flux cleaned = 0.000521155 Jy ! Component: 200 - total flux cleaned = 0.000441126 Jy ! Component: 250 - total flux cleaned = 0.000288758 Jy ! Component: 300 - total flux cleaned = 7.37574e-05 Jy ! Component: 350 - total flux cleaned = -0.000130643 Jy ! Component: 400 - total flux cleaned = -0.000195538 Jy ! Component: 450 - total flux cleaned = -0.000414089 Jy ! Component: 500 - total flux cleaned = -0.00053317 Jy ! Component: 550 - total flux cleaned = -0.000619459 Jy ! Component: 600 - total flux cleaned = -0.000787125 Jy ! Component: 650 - total flux cleaned = -0.000949371 Jy ! Component: 700 - total flux cleaned = -0.00110584 Jy ! Component: 750 - total flux cleaned = -0.00125746 Jy ! Component: 800 - total flux cleaned = -0.00137984 Jy ! Component: 850 - total flux cleaned = -0.00147492 Jy ! Component: 900 - total flux cleaned = -0.00161352 Jy ! Component: 950 - total flux cleaned = -0.00168127 Jy ! Component: 1000 - total flux cleaned = -0.00176842 Jy ! Component: 1050 - total flux cleaned = -0.00176818 Jy ! Component: 1100 - total flux cleaned = -0.00178948 Jy ! Component: 1150 - total flux cleaned = -0.00185109 Jy ! Component: 1200 - total flux cleaned = -0.00195055 Jy ! Component: 1250 - total flux cleaned = -0.0019895 Jy ! Component: 1300 - total flux cleaned = -0.0019891 Jy ! Component: 1350 - total flux cleaned = -0.00195194 Jy ! Component: 1400 - total flux cleaned = -0.00191596 Jy ! Component: 1450 - total flux cleaned = -0.00186257 Jy ! Component: 1500 - total flux cleaned = -0.00173943 Jy ! Component: 1550 - total flux cleaned = -0.00163573 Jy ! Component: 1600 - total flux cleaned = -0.00149977 Jy ! Component: 1650 - total flux cleaned = -0.00146669 Jy ! Component: 1700 - total flux cleaned = -0.00138433 Jy ! Component: 1750 - total flux cleaned = -0.0012702 Jy ! Component: 1800 - total flux cleaned = -0.00115764 Jy ! Component: 1850 - total flux cleaned = -0.000999131 Jy ! Component: 1900 - total flux cleaned = -0.000858274 Jy ! Component: 1950 - total flux cleaned = -0.000734477 Jy ! Component: 2000 - total flux cleaned = -0.000627476 Jy ! Component: 2050 - total flux cleaned = -0.000521818 Jy ! Component: 2100 - total flux cleaned = -0.000387352 Jy ! Component: 2150 - total flux cleaned = -0.000283884 Jy ! Component: 2200 - total flux cleaned = -0.000166934 Jy ! Component: 2250 - total flux cleaned = -0.00010885 Jy ! Component: 2300 - total flux cleaned = 5.98831e-06 Jy ! Component: 2350 - total flux cleaned = 0.00010539 Jy ! Component: 2400 - total flux cleaned = 0.000204034 Jy ! Component: 2450 - total flux cleaned = 0.000273815 Jy ! Component: 2500 - total flux cleaned = 0.000370544 Jy ! Component: 2550 - total flux cleaned = 0.000438944 Jy ! Component: 2600 - total flux cleaned = 0.000493384 Jy ! Component: 2650 - total flux cleaned = 0.000587814 Jy ! Component: 2700 - total flux cleaned = 0.00066804 Jy ! Component: 2750 - total flux cleaned = 0.000760729 Jy ! Component: 2800 - total flux cleaned = 0.000826417 Jy ! Component: 2850 - total flux cleaned = 0.000891563 Jy ! Component: 2900 - total flux cleaned = 0.000956351 Jy ! Component: 2950 - total flux cleaned = 0.00103346 Jy ! Component: 3000 - total flux cleaned = 0.00109732 Jy ! Component: 3050 - total flux cleaned = 0.0011227 Jy ! Component: 3100 - total flux cleaned = 0.00116057 Jy ! Component: 3150 - total flux cleaned = 0.00117308 Jy ! Component: 3200 - total flux cleaned = 0.00119799 Jy ! Component: 3250 - total flux cleaned = 0.00119804 Jy ! Component: 3300 - total flux cleaned = 0.0012228 Jy ! Component: 3350 - total flux cleaned = 0.00123506 Jy ! Component: 3400 - total flux cleaned = 0.00130822 Jy ! Component: 3450 - total flux cleaned = 0.00132039 Jy ! Component: 3500 - total flux cleaned = 0.00135659 Jy ! Component: 3550 - total flux cleaned = 0.00135651 Jy ! Component: 3600 - total flux cleaned = 0.00139249 Jy ! Component: 3650 - total flux cleaned = 0.00145211 Jy ! Component: 3700 - total flux cleaned = 0.00146393 Jy ! Component: 3750 - total flux cleaned = 0.00149937 Jy ! Component: 3800 - total flux cleaned = 0.00152292 Jy ! Component: 3850 - total flux cleaned = 0.00156978 Jy ! Component: 3900 - total flux cleaned = 0.00159316 Jy ! Component: 3950 - total flux cleaned = 0.0016281 Jy ! Component: 4000 - total flux cleaned = 0.00166293 Jy ! Component: 4050 - total flux cleaned = 0.00172081 Jy ! Total flux subtracted in 4096 components = 0.0017438 Jy ! Clean residual min=-0.000738 max=0.000618 Jy/beam ! Clean residual mean=-0.000000 rms=0.000204 Jy/beam ! Combined flux in latest and established models = 0.154566 Jy keep ! Adding 276 model components to the UV plane model. ! The established model now contains 413 components and 0.154566 Jy ![Exited script file: muppet] wmap "J1629-2026_S_2017_10_21_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.333 x 18.53 at -18.24 degrees (North through East) ! Clean map min=-0.0017272 max=0.093402 Jy/beam ! Writing clean map to FITS file: J1629-2026_S_2017_10_21_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.0934025 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000203472 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.653533 0.653533 1.30707 2.61413 5.22827 10.4565 20.9131 41.8261 83.6523 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0006 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.093 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.333 x 18.53 at -18.24 degrees (North through East) ! Clean map min=-0.0017272 max=0.093402 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J1629-2026_S_2017_10_21_pus_uvs.log closed on Sat May 11 21:02:22 2019