! Started logfile: J1629-1720_S_2017_08_12_pus_uvs.log on Fri May 10 15:03:09 2019 obs J1629-1720_S_2017_08_12_pus_uva.fits ! Reading UV FITS file: J1629-1720_S_2017_08_12_pus_uva.fits ! AN table 1: 96 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.772685 visibilities/baseline/integration-bin. ! Found source: J1629-1720 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 594 lines of history. ! ! Reading 13352 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J1629-1720_S_2017_08_12_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 143 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 203 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 238 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 795 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.927503Jy sigma=0.007111 ! Fit after self-cal, rms=0.905063Jy sigma=0.006938 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.336 mas, bmaj=6.457 mas, bpa=-2.109 degrees ! Estimated noise=1520.61 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0747592 Jy ! Component: 100 - total flux cleaned = 0.0936482 Jy ! Total flux subtracted in 100 components = 0.0936482 Jy ! Clean residual min=-0.005715 max=0.007893 Jy/beam ! Clean residual mean=-0.000010 rms=0.001403 Jy/beam ! Combined flux in latest and established models = 0.0936482 Jy ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 9 components and 0.0936482 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.092920Jy sigma=0.000673 ! Fit after self-cal, rms=0.092919Jy sigma=0.000673 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.823 mas, bmaj=7.312 mas, bpa=-3.023 degrees ! Estimated noise=1026.21 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0105496 Jy ! Component: 100 - total flux cleaned = 0.0152484 Jy ! Component: 150 - total flux cleaned = 0.0177676 Jy ! Component: 200 - total flux cleaned = 0.0191745 Jy ! Total flux subtracted in 200 components = 0.0191745 Jy ! Clean residual min=-0.003369 max=0.003376 Jy/beam ! Clean residual mean=-0.000003 rms=0.000778 Jy/beam ! Combined flux in latest and established models = 0.112823 Jy ! Performing phase self-cal ! Adding 29 model components to the UV plane model. ! The established model now contains 35 components and 0.112823 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.091897Jy sigma=0.000664 ! Fit after self-cal, rms=0.091915Jy sigma=0.000664 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.05 FD 1.00* HN 1.02 KP 1.02 ! LA 1.01 MK 0.98 NL 0.93 OV 0.96 ! PT 1.02 SC 0.94 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* HN 1.16 KP 0.95 ! LA 0.92 MK 1.05 NL 1.10 OV 1.00 ! PT 0.98 SC 1.06 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* HN 1.02 KP 1.01 ! LA 0.96 MK 1.08 NL 1.00 OV 0.94 ! PT 0.99 SC 1.01 ! ! ! Correcting IF 4. ! A total of 165 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.00* FD 0.00* HN 0.00* KP 0.00* ! LA 0.00* MK 0.00* NL 0.00* OV 0.00* ! PT 0.00* SC 0.00* ! ! ! Fit before self-cal, rms=0.091915Jy sigma=0.000664 ! Fit after self-cal, rms=0.093628Jy sigma=0.000664 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.881 mas, bmaj=7.378 mas, bpa=-1.828 degrees ! Estimated noise=1037.49 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000384831 Jy ! Component: 100 - total flux cleaned = -0.000316193 Jy ! Component: 150 - total flux cleaned = -0.000334598 Jy ! Component: 200 - total flux cleaned = -0.000352452 Jy ! Total flux subtracted in 200 components = -0.000352452 Jy ! Clean residual min=-0.002674 max=0.002686 Jy/beam ! Clean residual mean=0.000001 rms=0.000679 Jy/beam ! Combined flux in latest and established models = 0.11247 Jy ! Performing phase self-cal ! Adding 8 model components to the UV plane model. ! The established model now contains 41 components and 0.11247 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.093613Jy sigma=0.000664 ! Fit after self-cal, rms=0.093671Jy sigma=0.000664 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.093671Jy sigma=0.000664 ! Fit after self-cal, rms=0.094347Jy sigma=0.000662 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.884 mas, bmaj=7.395 mas, bpa=-1.888 degrees ! Estimated noise=1037.22 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000168727 Jy ! Component: 100 - total flux cleaned = -0.000220249 Jy ! Component: 150 - total flux cleaned = -0.000206869 Jy ! Component: 200 - total flux cleaned = -0.000218116 Jy ! Total flux subtracted in 200 components = -0.000218116 Jy ! Clean residual min=-0.002742 max=0.002401 Jy/beam ! Clean residual mean=0.000003 rms=0.000601 Jy/beam ! Combined flux in latest and established models = 0.112252 Jy selfcal ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 48 components and 0.112252 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.094339Jy sigma=0.000662 ! Fit after self-cal, rms=0.094385Jy sigma=0.000661 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -7.50888e-05 Jy ! Component: 100 - total flux cleaned = -8.85449e-05 Jy ! Component: 150 - total flux cleaned = -0.00010063 Jy ! Component: 200 - total flux cleaned = -9.12211e-05 Jy ! Total flux subtracted in 200 components = -9.12211e-05 Jy ! Clean residual min=-0.002699 max=0.002384 Jy/beam ! Clean residual mean=0.000002 rms=0.000597 Jy/beam ! Combined flux in latest and established models = 0.112161 Jy ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 50 components and 0.112161 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.094380Jy sigma=0.000661 ! Fit after self-cal, rms=0.094378Jy sigma=0.000661 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.094378Jy sigma=0.000661 ! Fit after self-cal, rms=0.094682Jy sigma=0.000661 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.885 mas, bmaj=7.401 mas, bpa=-1.923 degrees ! Estimated noise=1037.48 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000183288 Jy ! Component: 100 - total flux cleaned = -0.00020821 Jy ! Component: 150 - total flux cleaned = -0.000197604 Jy ! Component: 200 - total flux cleaned = -0.000197364 Jy ! Total flux subtracted in 200 components = -0.000197364 Jy ! Clean residual min=-0.002679 max=0.002365 Jy/beam ! Clean residual mean=0.000003 rms=0.000593 Jy/beam ! Combined flux in latest and established models = 0.111964 Jy selfcal ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 52 components and 0.111964 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.094678Jy sigma=0.000661 ! Fit after self-cal, rms=0.094684Jy sigma=0.000661 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -7.1514e-05 Jy ! Component: 100 - total flux cleaned = -8.14576e-05 Jy ! Component: 150 - total flux cleaned = -8.20484e-05 Jy ! Component: 200 - total flux cleaned = -8.19209e-05 Jy ! Total flux subtracted in 200 components = -8.19209e-05 Jy ! Clean residual min=-0.002662 max=0.002362 Jy/beam ! Clean residual mean=0.000003 rms=0.000591 Jy/beam ! Combined flux in latest and established models = 0.111882 Jy ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 55 components and 0.111882 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.094681Jy sigma=0.000661 ! Fit after self-cal, rms=0.094681Jy sigma=0.000661 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.094681Jy sigma=0.000661 ! Fit after self-cal, rms=0.094762Jy sigma=0.000661 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.268 mas, bmaj=16.48 mas, bpa=-1.263 degrees ! Estimated noise=1368.04 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000250287 Jy ! Component: 100 - total flux cleaned = -0.000254212 Jy ! Component: 150 - total flux cleaned = -0.00025626 Jy ! Component: 200 - total flux cleaned = -0.000255044 Jy ! Total flux subtracted in 200 components = -0.000255044 Jy ! Clean residual min=-0.003259 max=0.002871 Jy/beam ! Clean residual mean=0.000007 rms=0.000891 Jy/beam ! Combined flux in latest and established models = 0.111627 Jy selfcal ! Performing phase self-cal ! Adding 22 model components to the UV plane model. ! The established model now contains 67 components and 0.111627 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.094764Jy sigma=0.000661 ! Fit after self-cal, rms=0.094760Jy sigma=0.000661 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -3.92804e-05 Jy ! Component: 100 - total flux cleaned = -3.84166e-05 Jy ! Component: 150 - total flux cleaned = -3.83228e-05 Jy ! Component: 200 - total flux cleaned = -2.60371e-05 Jy ! Total flux subtracted in 200 components = -2.60371e-05 Jy ! Clean residual min=-0.003254 max=0.002880 Jy/beam ! Clean residual mean=0.000007 rms=0.000888 Jy/beam ! Combined flux in latest and established models = 0.111601 Jy ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 69 components and 0.111601 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.094764Jy sigma=0.000661 ! Fit after self-cal, rms=0.094759Jy sigma=0.000661 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=2.887 mas, bmaj=7.407 mas, bpa=-1.955 degrees ! Estimated noise=1037.61 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.887 x 7.407 at -1.955 degrees (North through East) ! Clean map min=-0.0024939 max=0.098112 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.39 mas, bmaj=6.468 mas, bpa=-1.078 degrees ! Estimated noise=1560.57 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0758756 Jy ! Component: 100 - total flux cleaned = 0.0958238 Jy ! Component: 150 - total flux cleaned = 0.10417 Jy ! Component: 200 - total flux cleaned = 0.108102 Jy ! Total flux subtracted in 200 components = 0.108102 Jy ! Clean residual min=-0.003672 max=0.003429 Jy/beam ! Clean residual mean=-0.000001 rms=0.000904 Jy/beam ! Combined flux in latest and established models = 0.108102 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 18 model components to the UV plane model. ! The established model now contains 18 components and 0.108102 Jy ! Inverting map and beam ! Estimated beam: bmin=2.887 mas, bmaj=7.407 mas, bpa=-1.955 degrees ! Estimated noise=1037.61 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00191721 Jy ! Component: 100 - total flux cleaned = 0.00231767 Jy ! Component: 150 - total flux cleaned = 0.00261012 Jy ! Component: 200 - total flux cleaned = 0.00282739 Jy ! Total flux subtracted in 200 components = 0.00282739 Jy ! Clean residual min=-0.002675 max=0.002373 Jy/beam ! Clean residual mean=0.000002 rms=0.000600 Jy/beam ! Combined flux in latest and established models = 0.11093 Jy ! Adding 23 model components to the UV plane model. ! The established model now contains 40 components and 0.11093 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.268 mas, bmaj=16.48 mas, bpa=-1.263 degrees ! Estimated noise=1368.04 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000512959 Jy ! Component: 100 - total flux cleaned = 0.000513096 Jy ! Component: 150 - total flux cleaned = 0.000514881 Jy ! Component: 200 - total flux cleaned = 0.000530053 Jy ! Total flux subtracted in 200 components = 0.000530053 Jy ! Clean residual min=-0.003258 max=0.002836 Jy/beam ! Clean residual mean=0.000007 rms=0.000887 Jy/beam ! Combined flux in latest and established models = 0.11146 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 2.22718e-05 Jy ! Component: 100 - total flux cleaned = 4.07866e-05 Jy ! Component: 150 - total flux cleaned = 5.62614e-05 Jy ! Component: 200 - total flux cleaned = 6.31638e-05 Jy ! Total flux subtracted in 200 components = 6.31638e-05 Jy ! Clean residual min=-0.003264 max=0.002855 Jy/beam ! Clean residual mean=0.000007 rms=0.000883 Jy/beam ! Combined flux in latest and established models = 0.111523 Jy ! Adding 14 model components to the UV plane model. ! The established model now contains 49 components and 0.111523 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=2.887 mas, bmaj=7.407 mas, bpa=-1.955 degrees ! Estimated noise=1037.61 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000123289 Jy ! Component: 100 - total flux cleaned = 2.29001e-05 Jy ! Component: 150 - total flux cleaned = -3.07022e-05 Jy ! Component: 200 - total flux cleaned = -4.56652e-05 Jy ! Total flux subtracted in 200 components = -4.56652e-05 Jy ! Clean residual min=-0.002655 max=0.002403 Jy/beam ! Clean residual mean=0.000003 rms=0.000586 Jy/beam ! Combined flux in latest and established models = 0.111477 Jy selfcal ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 65 components and 0.111477 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.094765Jy sigma=0.000661 ! Fit after self-cal, rms=0.094755Jy sigma=0.000661 wmodel J1629-1720_S_2017_08_12_pus_map.mod ! Writing 65 model components to file: J1629-1720_S_2017_08_12_pus_map.mod wobs J1629-1720_S_2017_08_12_pus_uvs.fits ! Writing UV FITS file: J1629-1720_S_2017_08_12_pus_uvs.fits wwins J1629-1720_S_2017_08_12_pus_map.win ! wwins: Wrote 1 windows to J1629-1720_S_2017_08_12_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -4.13497e-05 Jy ! Component: 100 - total flux cleaned = 0.000360908 Jy ! Component: 150 - total flux cleaned = 0.000585805 Jy ! Component: 200 - total flux cleaned = 0.000759706 Jy ! Component: 250 - total flux cleaned = 0.000991891 Jy ! Component: 300 - total flux cleaned = 0.00118225 Jy ! Component: 350 - total flux cleaned = 0.00130349 Jy ! Component: 400 - total flux cleaned = 0.00142043 Jy ! Component: 450 - total flux cleaned = 0.00153408 Jy ! Component: 500 - total flux cleaned = 0.00169954 Jy ! Component: 550 - total flux cleaned = 0.00180667 Jy ! Component: 600 - total flux cleaned = 0.00188555 Jy ! Component: 650 - total flux cleaned = 0.00198801 Jy ! Component: 700 - total flux cleaned = 0.00208825 Jy ! Component: 750 - total flux cleaned = 0.00218619 Jy ! Component: 800 - total flux cleaned = 0.0022578 Jy ! Component: 850 - total flux cleaned = 0.00228131 Jy ! Component: 900 - total flux cleaned = 0.00232743 Jy ! Component: 950 - total flux cleaned = 0.0024398 Jy ! Component: 1000 - total flux cleaned = 0.00250542 Jy ! Component: 1050 - total flux cleaned = 0.00259097 Jy ! Component: 1100 - total flux cleaned = 0.00259068 Jy ! Component: 1150 - total flux cleaned = 0.00259078 Jy ! Component: 1200 - total flux cleaned = 0.00267258 Jy ! Component: 1250 - total flux cleaned = 0.00265238 Jy ! Component: 1300 - total flux cleaned = 0.00271132 Jy ! Component: 1350 - total flux cleaned = 0.0027888 Jy ! Component: 1400 - total flux cleaned = 0.00280789 Jy ! Component: 1450 - total flux cleaned = 0.00288324 Jy ! Component: 1500 - total flux cleaned = 0.00293823 Jy ! Component: 1550 - total flux cleaned = 0.00295628 Jy ! Component: 1600 - total flux cleaned = 0.00299222 Jy ! Component: 1650 - total flux cleaned = 0.00302751 Jy ! Component: 1700 - total flux cleaned = 0.00302731 Jy ! Component: 1750 - total flux cleaned = 0.00301019 Jy ! Component: 1800 - total flux cleaned = 0.00309594 Jy ! Component: 1850 - total flux cleaned = 0.0031633 Jy ! Component: 1900 - total flux cleaned = 0.00312964 Jy ! Component: 1950 - total flux cleaned = 0.00319572 Jy ! Component: 2000 - total flux cleaned = 0.00324446 Jy ! Component: 2050 - total flux cleaned = 0.00324437 Jy ! Component: 2100 - total flux cleaned = 0.00332431 Jy ! Component: 2150 - total flux cleaned = 0.00329266 Jy ! Component: 2200 - total flux cleaned = 0.00330857 Jy ! Component: 2250 - total flux cleaned = 0.00337028 Jy ! Component: 2300 - total flux cleaned = 0.00337029 Jy ! Component: 2350 - total flux cleaned = 0.00337029 Jy ! Component: 2400 - total flux cleaned = 0.00344523 Jy ! Component: 2450 - total flux cleaned = 0.0034451 Jy ! Component: 2500 - total flux cleaned = 0.0034891 Jy ! Component: 2550 - total flux cleaned = 0.00356173 Jy ! Component: 2600 - total flux cleaned = 0.00361943 Jy ! Component: 2650 - total flux cleaned = 0.00364802 Jy ! Component: 2700 - total flux cleaned = 0.0036907 Jy ! Component: 2750 - total flux cleaned = 0.00373282 Jy ! Component: 2800 - total flux cleaned = 0.00377452 Jy ! Component: 2850 - total flux cleaned = 0.0037883 Jy ! Component: 2900 - total flux cleaned = 0.00385653 Jy ! Component: 2950 - total flux cleaned = 0.00389711 Jy ! Component: 3000 - total flux cleaned = 0.00392388 Jy ! Component: 3050 - total flux cleaned = 0.00393717 Jy ! Component: 3100 - total flux cleaned = 0.00393726 Jy ! Component: 3150 - total flux cleaned = 0.00400293 Jy ! Component: 3200 - total flux cleaned = 0.00400299 Jy ! Component: 3250 - total flux cleaned = 0.00400312 Jy ! Component: 3300 - total flux cleaned = 0.00404155 Jy ! Component: 3350 - total flux cleaned = 0.00404149 Jy ! Component: 3400 - total flux cleaned = 0.00402878 Jy ! Component: 3450 - total flux cleaned = 0.00406652 Jy ! Component: 3500 - total flux cleaned = 0.00410411 Jy ! Component: 3550 - total flux cleaned = 0.00415383 Jy ! Component: 3600 - total flux cleaned = 0.00420317 Jy ! Component: 3650 - total flux cleaned = 0.00425209 Jy ! Component: 3700 - total flux cleaned = 0.0042642 Jy ! Component: 3750 - total flux cleaned = 0.00430044 Jy ! Component: 3800 - total flux cleaned = 0.00431242 Jy ! Component: 3850 - total flux cleaned = 0.00436027 Jy ! Component: 3900 - total flux cleaned = 0.00441968 Jy ! Component: 3950 - total flux cleaned = 0.00444322 Jy ! Component: 4000 - total flux cleaned = 0.0044666 Jy ! Component: 4050 - total flux cleaned = 0.00447835 Jy ! Total flux subtracted in 4096 components = 0.00445512 Jy ! Clean residual min=-0.000717 max=0.000735 Jy/beam ! Clean residual mean=0.000002 rms=0.000205 Jy/beam ! Combined flux in latest and established models = 0.115932 Jy keep ! Adding 267 model components to the UV plane model. ! The established model now contains 332 components and 0.115932 Jy ![Exited script file: muppet] wmap "J1629-1720_S_2017_08_12_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.887 x 7.407 at -1.955 degrees (North through East) ! Clean map min=-0.0014977 max=0.098392 Jy/beam ! Writing clean map to FITS file: J1629-1720_S_2017_08_12_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.0983922 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000203756 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.621255 0.621255 1.24251 2.48502 4.97004 9.94008 19.8802 39.7603 79.5207 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0006 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.098 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.887 x 7.407 at -1.955 degrees (North through East) ! Clean map min=-0.0014977 max=0.098392 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J1629-1720_S_2017_08_12_pus_uvs.log closed on Fri May 10 15:03:14 2019