! Started logfile: J1628-1415_S_2017_08_12_pus_uvs.log on Fri May 10 15:03:05 2019 obs J1628-1415_S_2017_08_12_pus_uva.fits ! Reading UV FITS file: J1628-1415_S_2017_08_12_pus_uva.fits ! AN table 1: 75 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.769778 visibilities/baseline/integration-bin. ! Found source: J1628-1415 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 594 lines of history. ! ! Reading 10392 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J1628-1415_S_2017_08_12_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 89 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 163 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 163 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 546 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.903240Jy sigma=0.007027 ! Fit after self-cal, rms=0.883646Jy sigma=0.006880 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.421 mas, bmaj=6.747 mas, bpa=-4.161 degrees ! Estimated noise=1705.2 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.087388 Jy ! Component: 100 - total flux cleaned = 0.121701 Jy ! Total flux subtracted in 100 components = 0.121701 Jy ! Clean residual min=-0.010058 max=0.017189 Jy/beam ! Clean residual mean=-0.000035 rms=0.003452 Jy/beam ! Combined flux in latest and established models = 0.121701 Jy ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 17 components and 0.121701 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.105506Jy sigma=0.000799 ! Fit after self-cal, rms=0.105331Jy sigma=0.000798 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.812 mas, bmaj=7.464 mas, bpa=-3.471 degrees ! Estimated noise=1107.24 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0300506 Jy ! Component: 100 - total flux cleaned = 0.0467048 Jy ! Component: 150 - total flux cleaned = 0.056675 Jy ! Component: 200 - total flux cleaned = 0.0628043 Jy ! Total flux subtracted in 200 components = 0.0628043 Jy ! Clean residual min=-0.009461 max=0.016322 Jy/beam ! Clean residual mean=-0.000045 rms=0.003145 Jy/beam ! Combined flux in latest and established models = 0.184505 Jy ! Performing phase self-cal ! Adding 57 model components to the UV plane model. ! The established model now contains 69 components and 0.184505 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.097237Jy sigma=0.000719 ! Fit after self-cal, rms=0.097135Jy sigma=0.000718 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.01 FD 1.00* HN 1.15 KP 1.08 ! LA 0.88 MK 1.09 NL 0.92 OV 1.08 ! PT 0.91 SC 1.11 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* HN 1.18 KP 1.02 ! LA 0.86 MK 1.11 NL 1.03 OV 1.16 ! PT 0.84 SC 1.05 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* HN 1.17 KP 1.01 ! LA 0.88 MK 1.08 NL 1.05 OV 1.03 ! PT 0.85 SC 0.92 ! ! ! Correcting IF 4. ! A total of 204 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.00* FD 0.00* HN 0.00* KP 0.00* ! LA 0.00* MK 0.00* NL 0.00* OV 0.00* ! PT 0.00* SC 0.00* ! ! ! Fit before self-cal, rms=0.097135Jy sigma=0.000718 ! Fit after self-cal, rms=0.101848Jy sigma=0.000706 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.937 mas, bmaj=7.595 mas, bpa=-1.888 degrees ! Estimated noise=1128.91 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (22, -7). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0131798 Jy ! Component: 100 - total flux cleaned = 0.0201031 Jy ! Component: 150 - total flux cleaned = 0.0243294 Jy ! Component: 200 - total flux cleaned = 0.0251631 Jy ! Total flux subtracted in 200 components = 0.0251631 Jy ! Clean residual min=-0.005928 max=0.006965 Jy/beam ! Clean residual mean=-0.000006 rms=0.001675 Jy/beam ! Combined flux in latest and established models = 0.209668 Jy ! Performing phase self-cal ! Adding 40 model components to the UV plane model. ! The established model now contains 109 components and 0.209668 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.100080Jy sigma=0.000691 ! Fit after self-cal, rms=0.099953Jy sigma=0.000688 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.099953Jy sigma=0.000688 ! Fit after self-cal, rms=0.098760Jy sigma=0.000683 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.918 mas, bmaj=7.575 mas, bpa=-1.758 degrees ! Estimated noise=1111.69 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00546423 Jy ! Component: 100 - total flux cleaned = 0.00819078 Jy ! Component: 150 - total flux cleaned = 0.0087305 Jy ! Component: 200 - total flux cleaned = 0.00902625 Jy ! Total flux subtracted in 200 components = 0.00902625 Jy ! Clean residual min=-0.005207 max=0.005775 Jy/beam ! Clean residual mean=0.000003 rms=0.001240 Jy/beam ! Combined flux in latest and established models = 0.218694 Jy selfcal ! Performing phase self-cal ! Adding 38 model components to the UV plane model. ! The established model now contains 140 components and 0.218695 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.098396Jy sigma=0.000680 ! Fit after self-cal, rms=0.098264Jy sigma=0.000679 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (90, -111.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00465959 Jy ! Component: 100 - total flux cleaned = 0.0060489 Jy ! Component: 150 - total flux cleaned = 0.00665751 Jy ! Component: 200 - total flux cleaned = 0.00695872 Jy ! Total flux subtracted in 200 components = 0.00695872 Jy ! Clean residual min=-0.004496 max=0.004894 Jy/beam ! Clean residual mean=0.000006 rms=0.001092 Jy/beam ! Combined flux in latest and established models = 0.225653 Jy ! Performing phase self-cal ! Adding 31 model components to the UV plane model. ! The established model now contains 160 components and 0.225653 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.097956Jy sigma=0.000677 ! Fit after self-cal, rms=0.097863Jy sigma=0.000677 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.097863Jy sigma=0.000677 ! Fit after self-cal, rms=0.095806Jy sigma=0.000676 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.916 mas, bmaj=7.572 mas, bpa=-1.731 degrees ! Estimated noise=1106.32 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00331931 Jy ! Component: 100 - total flux cleaned = 0.00542209 Jy ! Component: 150 - total flux cleaned = 0.00629714 Jy ! Component: 200 - total flux cleaned = 0.00667309 Jy ! Total flux subtracted in 200 components = 0.00667309 Jy ! Clean residual min=-0.003873 max=0.004592 Jy/beam ! Clean residual mean=0.000001 rms=0.000974 Jy/beam ! Combined flux in latest and established models = 0.232326 Jy selfcal ! Performing phase self-cal ! Adding 33 model components to the UV plane model. ! The established model now contains 172 components and 0.232326 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.095641Jy sigma=0.000675 ! Fit after self-cal, rms=0.095543Jy sigma=0.000675 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (6.5, -9). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00289315 Jy ! Component: 100 - total flux cleaned = 0.00328634 Jy ! Component: 150 - total flux cleaned = 0.00370608 Jy ! Component: 200 - total flux cleaned = 0.0040033 Jy ! Total flux subtracted in 200 components = 0.0040033 Jy ! Clean residual min=-0.003367 max=0.003429 Jy/beam ! Clean residual mean=0.000005 rms=0.000880 Jy/beam ! Combined flux in latest and established models = 0.23633 Jy ! Performing phase self-cal ! Adding 24 model components to the UV plane model. ! The established model now contains 190 components and 0.23633 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.095312Jy sigma=0.000673 ! Fit after self-cal, rms=0.095271Jy sigma=0.000673 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.095271Jy sigma=0.000673 ! Fit after self-cal, rms=0.093339Jy sigma=0.000673 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.093 mas, bmaj=15.87 mas, bpa=-1.201 degrees ! Estimated noise=1426.67 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00349463 Jy ! Component: 100 - total flux cleaned = 0.0046082 Jy ! Component: 150 - total flux cleaned = 0.00545356 Jy ! Component: 200 - total flux cleaned = 0.00593354 Jy ! Total flux subtracted in 200 components = 0.00593354 Jy ! Clean residual min=-0.003266 max=0.003924 Jy/beam ! Clean residual mean=0.000008 rms=0.001045 Jy/beam ! Combined flux in latest and established models = 0.242263 Jy selfcal ! Performing phase self-cal ! Adding 34 model components to the UV plane model. ! The established model now contains 211 components and 0.242263 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.093281Jy sigma=0.000672 ! Fit after self-cal, rms=0.093193Jy sigma=0.000672 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000553083 Jy ! Component: 100 - total flux cleaned = 0.000854675 Jy ! Component: 150 - total flux cleaned = 0.00120553 Jy ! Component: 200 - total flux cleaned = 0.00141993 Jy ! Total flux subtracted in 200 components = 0.00141993 Jy ! Clean residual min=-0.003179 max=0.003780 Jy/beam ! Clean residual mean=0.000011 rms=0.001009 Jy/beam ! Combined flux in latest and established models = 0.243683 Jy ! Performing phase self-cal ! Adding 38 model components to the UV plane model. ! The established model now contains 236 components and 0.243683 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.093188Jy sigma=0.000672 ! Fit after self-cal, rms=0.093169Jy sigma=0.000672 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=2.906 mas, bmaj=7.55 mas, bpa=-1.637 degrees ! Estimated noise=1099.4 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.906 x 7.55 at -1.637 degrees (North through East) ! Clean map min=-0.0029244 max=0.11251 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.488 mas, bmaj=6.754 mas, bpa=-2.649 degrees ! Estimated noise=1706 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0858389 Jy ! Component: 100 - total flux cleaned = 0.120034 Jy ! Component: 150 - total flux cleaned = 0.140339 Jy ! Component: 200 - total flux cleaned = 0.155573 Jy ! Total flux subtracted in 200 components = 0.155573 Jy ! Clean residual min=-0.007439 max=0.010258 Jy/beam ! Clean residual mean=-0.000018 rms=0.002398 Jy/beam ! Combined flux in latest and established models = 0.155573 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 38 model components to the UV plane model. ! The established model now contains 38 components and 0.155573 Jy ! Inverting map and beam ! Estimated beam: bmin=2.906 mas, bmaj=7.55 mas, bpa=-1.637 degrees ! Estimated noise=1099.4 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0184324 Jy ! Component: 100 - total flux cleaned = 0.0319104 Jy ! Component: 150 - total flux cleaned = 0.0423421 Jy ! Component: 200 - total flux cleaned = 0.0505985 Jy ! Total flux subtracted in 200 components = 0.0505985 Jy ! Clean residual min=-0.004376 max=0.006028 Jy/beam ! Clean residual mean=-0.000010 rms=0.001608 Jy/beam ! Combined flux in latest and established models = 0.206171 Jy ! Adding 79 model components to the UV plane model. ! The established model now contains 108 components and 0.206171 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.093 mas, bmaj=15.87 mas, bpa=-1.201 degrees ! Estimated noise=1426.67 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0121133 Jy ! Component: 100 - total flux cleaned = 0.0195896 Jy ! Component: 150 - total flux cleaned = 0.0246457 Jy ! Component: 200 - total flux cleaned = 0.0282178 Jy ! Total flux subtracted in 200 components = 0.0282178 Jy ! Clean residual min=-0.003617 max=0.003692 Jy/beam ! Clean residual mean=0.000004 rms=0.001145 Jy/beam ! Combined flux in latest and established models = 0.234389 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00258062 Jy ! Component: 100 - total flux cleaned = 0.00449069 Jy ! Component: 150 - total flux cleaned = 0.00594995 Jy ! Component: 200 - total flux cleaned = 0.00665408 Jy ! Total flux subtracted in 200 components = 0.00665408 Jy ! Clean residual min=-0.003300 max=0.003829 Jy/beam ! Clean residual mean=0.000011 rms=0.000952 Jy/beam ! Combined flux in latest and established models = 0.241043 Jy ! Adding 111 model components to the UV plane model. ! The established model now contains 207 components and 0.241043 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=2.906 mas, bmaj=7.55 mas, bpa=-1.637 degrees ! Estimated noise=1099.4 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000497683 Jy ! Component: 100 - total flux cleaned = 0.000644549 Jy ! Component: 150 - total flux cleaned = 0.000839447 Jy ! Component: 200 - total flux cleaned = 0.00095875 Jy ! Total flux subtracted in 200 components = 0.00095875 Jy ! Clean residual min=-0.002892 max=0.003345 Jy/beam ! Clean residual mean=0.000006 rms=0.000767 Jy/beam ! Combined flux in latest and established models = 0.242002 Jy selfcal ! Performing phase self-cal ! Adding 23 model components to the UV plane model. ! The established model now contains 230 components and 0.242002 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.093172Jy sigma=0.000672 ! Fit after self-cal, rms=0.093027Jy sigma=0.000671 wmodel J1628-1415_S_2017_08_12_pus_map.mod ! Writing 230 model components to file: J1628-1415_S_2017_08_12_pus_map.mod wobs J1628-1415_S_2017_08_12_pus_uvs.fits ! Writing UV FITS file: J1628-1415_S_2017_08_12_pus_uvs.fits wwins J1628-1415_S_2017_08_12_pus_map.win ! wwins: Wrote 4 windows to J1628-1415_S_2017_08_12_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.00095937 Jy ! Component: 100 - total flux cleaned = 0.000859567 Jy ! Component: 150 - total flux cleaned = 0.000714938 Jy ! Component: 200 - total flux cleaned = 0.000762242 Jy ! Component: 250 - total flux cleaned = 0.000762396 Jy ! Component: 300 - total flux cleaned = 0.000679011 Jy ! Component: 350 - total flux cleaned = 0.000600974 Jy ! Component: 400 - total flux cleaned = 0.000562515 Jy ! Component: 450 - total flux cleaned = 0.0003762 Jy ! Component: 500 - total flux cleaned = 8.81169e-05 Jy ! Component: 550 - total flux cleaned = -8.67519e-05 Jy ! Component: 600 - total flux cleaned = -0.000325985 Jy ! Component: 650 - total flux cleaned = -0.000492333 Jy ! Component: 700 - total flux cleaned = -0.000590348 Jy ! Component: 750 - total flux cleaned = -0.000876357 Jy ! Component: 800 - total flux cleaned = -0.000969275 Jy ! Component: 850 - total flux cleaned = -0.00112257 Jy ! Component: 900 - total flux cleaned = -0.00136044 Jy ! Component: 950 - total flux cleaned = -0.00150552 Jy ! Component: 1000 - total flux cleaned = -0.00159102 Jy ! Component: 1050 - total flux cleaned = -0.00159069 Jy ! Component: 1100 - total flux cleaned = -0.00156304 Jy ! Component: 1150 - total flux cleaned = -0.00145483 Jy ! Component: 1200 - total flux cleaned = -0.00142813 Jy ! Component: 1250 - total flux cleaned = -0.00142848 Jy ! Component: 1300 - total flux cleaned = -0.00145397 Jy ! Component: 1350 - total flux cleaned = -0.00140333 Jy ! Component: 1400 - total flux cleaned = -0.0014033 Jy ! Component: 1450 - total flux cleaned = -0.001452 Jy ! Component: 1500 - total flux cleaned = -0.00147558 Jy ! Component: 1550 - total flux cleaned = -0.00142859 Jy ! Component: 1600 - total flux cleaned = -0.00147589 Jy ! Component: 1650 - total flux cleaned = -0.00145316 Jy ! Component: 1700 - total flux cleaned = -0.00156676 Jy ! Component: 1750 - total flux cleaned = -0.00152176 Jy ! Component: 1800 - total flux cleaned = -0.00158836 Jy ! Component: 1850 - total flux cleaned = -0.0016321 Jy ! Component: 1900 - total flux cleaned = -0.00167518 Jy ! Component: 1950 - total flux cleaned = -0.00169627 Jy ! Component: 2000 - total flux cleaned = -0.00173844 Jy ! Component: 2050 - total flux cleaned = -0.00173841 Jy ! Component: 2100 - total flux cleaned = -0.00182073 Jy ! Component: 2150 - total flux cleaned = -0.00180044 Jy ! Component: 2200 - total flux cleaned = -0.00184077 Jy ! Component: 2250 - total flux cleaned = -0.001861 Jy ! Component: 2300 - total flux cleaned = -0.00190014 Jy ! Component: 2350 - total flux cleaned = -0.00191951 Jy ! Component: 2400 - total flux cleaned = -0.00186162 Jy ! Component: 2450 - total flux cleaned = -0.00191874 Jy ! Component: 2500 - total flux cleaned = -0.00191844 Jy ! Component: 2550 - total flux cleaned = -0.00188126 Jy ! Component: 2600 - total flux cleaned = -0.00195503 Jy ! Component: 2650 - total flux cleaned = -0.00195505 Jy ! Component: 2700 - total flux cleaned = -0.0019546 Jy ! Component: 2750 - total flux cleaned = -0.00200813 Jy ! Component: 2800 - total flux cleaned = -0.00202571 Jy ! Component: 2850 - total flux cleaned = -0.0020432 Jy ! Component: 2900 - total flux cleaned = -0.00206045 Jy ! Component: 2950 - total flux cleaned = -0.00209455 Jy ! Component: 3000 - total flux cleaned = -0.00204395 Jy ! Component: 3050 - total flux cleaned = -0.00207778 Jy ! Component: 3100 - total flux cleaned = -0.00211104 Jy ! Component: 3150 - total flux cleaned = -0.00209429 Jy ! Component: 3200 - total flux cleaned = -0.00207801 Jy ! Component: 3250 - total flux cleaned = -0.00206167 Jy ! Component: 3300 - total flux cleaned = -0.00204563 Jy ! Component: 3350 - total flux cleaned = -0.00199829 Jy ! Component: 3400 - total flux cleaned = -0.00195112 Jy ! Component: 3450 - total flux cleaned = -0.00196675 Jy ! Component: 3500 - total flux cleaned = -0.0019205 Jy ! Component: 3550 - total flux cleaned = -0.0018594 Jy ! Component: 3600 - total flux cleaned = -0.00181388 Jy ! Component: 3650 - total flux cleaned = -0.00184385 Jy ! Component: 3700 - total flux cleaned = -0.0017691 Jy ! Component: 3750 - total flux cleaned = -0.0017396 Jy ! Component: 3800 - total flux cleaned = -0.00169572 Jy ! Component: 3850 - total flux cleaned = -0.00166659 Jy ! Component: 3900 - total flux cleaned = -0.00165208 Jy ! Component: 3950 - total flux cleaned = -0.00159486 Jy ! Component: 4000 - total flux cleaned = -0.00155254 Jy ! Component: 4050 - total flux cleaned = -0.00156658 Jy ! Total flux subtracted in 4096 components = -0.00155258 Jy ! Clean residual min=-0.000935 max=0.000768 Jy/beam ! Clean residual mean=0.000001 rms=0.000254 Jy/beam ! Combined flux in latest and established models = 0.240449 Jy keep ! Adding 283 model components to the UV plane model. ! The established model now contains 513 components and 0.240449 Jy ![Exited script file: muppet] wmap "J1628-1415_S_2017_08_12_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.906 x 7.55 at -1.637 degrees (North through East) ! Clean map min=-0.0019216 max=0.11663 Jy/beam ! Writing clean map to FITS file: J1628-1415_S_2017_08_12_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.116634 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000248627 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.639505 0.639505 1.27901 2.55802 5.11604 10.2321 20.4641 40.9283 81.8566 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0007 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.116 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.906 x 7.55 at -1.637 degrees (North through East) ! Clean map min=-0.0019216 max=0.11663 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J1628-1415_S_2017_08_12_pus_uvs.log closed on Fri May 10 15:03:09 2019