! Started logfile: J1628-0041_S_2017_05_27_pus_uvs.log on Fri May 3 11:10:39 2019 obs J1628-0041_S_2017_05_27_pus_uva.fits ! Reading UV FITS file: J1628-0041_S_2017_05_27_pus_uva.fits ! AN table 1: 174 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.85198 visibilities/baseline/integration-bin. ! Found source: J1628-0041 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 1211 lines of history. ! ! Reading 26684 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J1628-0041_S_2017_05_27_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 138 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 183 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 139 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 1014 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.915784Jy sigma=0.040596 ! Fit after self-cal, rms=0.899140Jy sigma=0.040549 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.613 mas, bmaj=7.239 mas, bpa=6.108 degrees ! Estimated noise=508.937 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0430657 Jy ! Component: 100 - total flux cleaned = 0.0603461 Jy ! Total flux subtracted in 100 components = 0.0603461 Jy ! Clean residual min=-0.014535 max=0.017815 Jy/beam ! Clean residual mean=-0.000014 rms=0.004251 Jy/beam ! Combined flux in latest and established models = 0.0603461 Jy ! Performing phase self-cal ! Adding 3 model components to the UV plane model. ! The established model now contains 3 components and 0.0603461 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.136990Jy sigma=0.001685 ! Fit after self-cal, rms=0.136707Jy sigma=0.001681 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=4.023 mas, bmaj=7.423 mas, bpa=6.8 degrees ! Estimated noise=364.071 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0148636 Jy ! Component: 100 - total flux cleaned = 0.0239519 Jy ! Component: 150 - total flux cleaned = 0.0287081 Jy ! Component: 200 - total flux cleaned = 0.0290839 Jy ! Total flux subtracted in 200 components = 0.0290839 Jy ! Clean residual min=-0.013980 max=0.014069 Jy/beam ! Clean residual mean=-0.000015 rms=0.003988 Jy/beam ! Combined flux in latest and established models = 0.0894299 Jy ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 19 components and 0.0894299 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.132007Jy sigma=0.001864 ! Fit after self-cal, rms=0.131652Jy sigma=0.001864 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.51 FD 0.70 HN 0.79 KP 0.89 ! LA 0.87 MK 0.88 NL 0.79 OV 0.86 ! PT 0.91 SC 0.67 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 0.49 FD 0.75 HN 0.87 KP 0.88 ! LA 0.84 MK 0.90 NL 0.90 OV 0.83 ! PT 0.93 SC 0.71 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 16.47 FD 0.79 HN 0.93 KP 0.90 ! LA 0.91 MK 1.07 NL 0.91 OV 0.84 ! PT 0.94 SC 0.74 ! ! ! Correcting IF 4. ! A total of 165 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 0.84 HN 0.85 KP 1.00* ! LA 0.79 MK 0.90 NL 1.00* OV 1.00* ! PT 0.99 SC 1.00* ! ! ! Fit before self-cal, rms=0.131652Jy sigma=0.001864 ! Fit after self-cal, rms=0.832579Jy sigma=0.000704 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.687 mas, bmaj=7.973 mas, bpa=4.716 degrees ! Estimated noise=450.413 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00190054 Jy ! Component: 100 - total flux cleaned = -0.00316999 Jy ! Component: 150 - total flux cleaned = -0.00438524 Jy ! Component: 200 - total flux cleaned = -0.00519387 Jy ! Total flux subtracted in 200 components = -0.00519387 Jy ! Clean residual min=-0.003115 max=0.003244 Jy/beam ! Clean residual mean=0.000004 rms=0.000770 Jy/beam ! Combined flux in latest and established models = 0.0842361 Jy ! Performing phase self-cal ! Adding 4 model components to the UV plane model. ! The established model now contains 20 components and 0.0842361 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.831071Jy sigma=0.000693 ! Fit after self-cal, rms=0.830999Jy sigma=0.000678 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.830999Jy sigma=0.000678 ! Fit after self-cal, rms=0.955382Jy sigma=0.000670 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.664 mas, bmaj=8.031 mas, bpa=3.913 degrees ! Estimated noise=453.036 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000292949 Jy ! Component: 100 - total flux cleaned = -0.000887616 Jy ! Component: 150 - total flux cleaned = -0.0012501 Jy ! Component: 200 - total flux cleaned = -0.00155211 Jy ! Total flux subtracted in 200 components = -0.00155211 Jy ! Clean residual min=-0.002373 max=0.002312 Jy/beam ! Clean residual mean=0.000005 rms=0.000555 Jy/beam ! Combined flux in latest and established models = 0.082684 Jy selfcal ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 26 components and 0.082684 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.954437Jy sigma=0.000668 ! Fit after self-cal, rms=0.954442Jy sigma=0.000668 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000279212 Jy ! Component: 100 - total flux cleaned = -0.00042866 Jy ! Component: 150 - total flux cleaned = -0.000554273 Jy ! Component: 200 - total flux cleaned = -0.000656737 Jy ! Total flux subtracted in 200 components = -0.000656737 Jy ! Clean residual min=-0.002119 max=0.002094 Jy/beam ! Clean residual mean=0.000004 rms=0.000528 Jy/beam ! Combined flux in latest and established models = 0.0820272 Jy ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 31 components and 0.0820272 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.954028Jy sigma=0.000668 ! Fit after self-cal, rms=0.954030Jy sigma=0.000668 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.954030Jy sigma=0.000668 ! Fit after self-cal, rms=1.020898Jy sigma=0.000664 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.646 mas, bmaj=8.044 mas, bpa=3.092 degrees ! Estimated noise=466.891 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000903341 Jy ! Component: 100 - total flux cleaned = 0.000546166 Jy ! Component: 150 - total flux cleaned = 0.000323673 Jy ! Component: 200 - total flux cleaned = 0.000136162 Jy ! Total flux subtracted in 200 components = 0.000136162 Jy ! Clean residual min=-0.002627 max=0.001736 Jy/beam ! Clean residual mean=0.000005 rms=0.000482 Jy/beam ! Combined flux in latest and established models = 0.0821634 Jy selfcal ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 32 components and 0.0821634 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=1.020388Jy sigma=0.000664 ! Fit after self-cal, rms=1.020388Jy sigma=0.000664 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000111427 Jy ! Component: 100 - total flux cleaned = -0.000110581 Jy ! Component: 150 - total flux cleaned = -0.000109201 Jy ! Component: 200 - total flux cleaned = -0.000144637 Jy ! Total flux subtracted in 200 components = -0.000144637 Jy ! Clean residual min=-0.002398 max=0.001624 Jy/beam ! Clean residual mean=0.000004 rms=0.000472 Jy/beam ! Combined flux in latest and established models = 0.0820187 Jy ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 43 components and 0.0820187 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=1.020204Jy sigma=0.000664 ! Fit after self-cal, rms=1.020205Jy sigma=0.000664 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=1.020205Jy sigma=0.000664 ! Fit after self-cal, rms=1.107683Jy sigma=0.000663 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.588 mas, bmaj=12.55 mas, bpa=0.2846 degrees ! Estimated noise=585.965 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00129747 Jy ! Component: 100 - total flux cleaned = 0.00104667 Jy ! Component: 150 - total flux cleaned = 0.000829625 Jy ! Component: 200 - total flux cleaned = 0.000643115 Jy ! Total flux subtracted in 200 components = 0.000643115 Jy ! Clean residual min=-0.002553 max=0.002091 Jy/beam ! Clean residual mean=0.000009 rms=0.000585 Jy/beam ! Combined flux in latest and established models = 0.0826619 Jy selfcal ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 46 components and 0.0826619 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=1.107189Jy sigma=0.000664 ! Fit after self-cal, rms=1.107192Jy sigma=0.000664 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000111308 Jy ! Component: 100 - total flux cleaned = -0.000253413 Jy ! Component: 150 - total flux cleaned = -0.000336792 Jy ! Component: 200 - total flux cleaned = -0.000374485 Jy ! Total flux subtracted in 200 components = -0.000374485 Jy ! Clean residual min=-0.002609 max=0.002087 Jy/beam ! Clean residual mean=0.000008 rms=0.000572 Jy/beam ! Combined flux in latest and established models = 0.0822874 Jy ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 49 components and 0.0822874 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=1.107008Jy sigma=0.000665 ! Fit after self-cal, rms=1.107009Jy sigma=0.000665 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.637 mas, bmaj=8.058 mas, bpa=2.409 degrees ! Estimated noise=481.248 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.637 x 8.058 at 2.409 degrees (North through East) ! Clean map min=-0.0030904 max=0.080754 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.108 mas, bmaj=7.236 mas, bpa=1.227 degrees ! Estimated noise=719.85 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0615362 Jy ! Component: 100 - total flux cleaned = 0.0751833 Jy ! Component: 150 - total flux cleaned = 0.0801353 Jy ! Component: 200 - total flux cleaned = 0.0827233 Jy ! Total flux subtracted in 200 components = 0.0827233 Jy ! Clean residual min=-0.002788 max=0.002524 Jy/beam ! Clean residual mean=0.000002 rms=0.000654 Jy/beam ! Combined flux in latest and established models = 0.0827233 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 27 model components to the UV plane model. ! The established model now contains 27 components and 0.0827233 Jy ! Inverting map and beam ! Estimated beam: bmin=3.637 mas, bmaj=8.058 mas, bpa=2.409 degrees ! Estimated noise=481.248 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000386543 Jy ! Component: 100 - total flux cleaned = -0.000436076 Jy ! Component: 150 - total flux cleaned = -0.000389952 Jy ! Component: 200 - total flux cleaned = -0.000389781 Jy ! Total flux subtracted in 200 components = -0.000389781 Jy ! Clean residual min=-0.002385 max=0.001653 Jy/beam ! Clean residual mean=0.000004 rms=0.000494 Jy/beam ! Combined flux in latest and established models = 0.0823335 Jy ! Adding 17 model components to the UV plane model. ! The established model now contains 43 components and 0.0823335 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.588 mas, bmaj=12.55 mas, bpa=0.2846 degrees ! Estimated noise=585.965 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -8.45157e-05 Jy ! Component: 100 - total flux cleaned = -0.000210798 Jy ! Component: 150 - total flux cleaned = -0.000319393 Jy ! Component: 200 - total flux cleaned = -0.000382553 Jy ! Total flux subtracted in 200 components = -0.000382553 Jy ! Clean residual min=-0.002629 max=0.002080 Jy/beam ! Clean residual mean=0.000007 rms=0.000560 Jy/beam ! Combined flux in latest and established models = 0.081951 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -5.78967e-05 Jy ! Component: 100 - total flux cleaned = -8.42963e-05 Jy ! Component: 150 - total flux cleaned = -0.000134986 Jy ! Component: 200 - total flux cleaned = -0.000205031 Jy ! Total flux subtracted in 200 components = -0.000205031 Jy ! Clean residual min=-0.002647 max=0.002103 Jy/beam ! Clean residual mean=0.000006 rms=0.000558 Jy/beam ! Combined flux in latest and established models = 0.0817459 Jy ! Adding 22 model components to the UV plane model. ! The established model now contains 61 components and 0.0817459 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.637 mas, bmaj=8.058 mas, bpa=2.409 degrees ! Estimated noise=481.248 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000162815 Jy ! Component: 100 - total flux cleaned = 0.000196909 Jy ! Component: 150 - total flux cleaned = 0.000277103 Jy ! Component: 200 - total flux cleaned = 0.000348509 Jy ! Total flux subtracted in 200 components = 0.000348509 Jy ! Clean residual min=-0.002264 max=0.001737 Jy/beam ! Clean residual mean=0.000004 rms=0.000486 Jy/beam ! Combined flux in latest and established models = 0.0820944 Jy selfcal ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 69 components and 0.0820944 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=1.106632Jy sigma=0.000665 ! Fit after self-cal, rms=1.106621Jy sigma=0.000665 wmodel J1628-0041_S_2017_05_27_pus_map.mod ! Writing 69 model components to file: J1628-0041_S_2017_05_27_pus_map.mod wobs J1628-0041_S_2017_05_27_pus_uvs.fits ! Writing UV FITS file: J1628-0041_S_2017_05_27_pus_uvs.fits wwins J1628-0041_S_2017_05_27_pus_map.win ! wwins: Wrote 1 windows to J1628-0041_S_2017_05_27_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.000972267 Jy ! Component: 100 - total flux cleaned = -0.00184094 Jy ! Component: 150 - total flux cleaned = -0.00236404 Jy ! Component: 200 - total flux cleaned = -0.00279992 Jy ! Component: 250 - total flux cleaned = -0.00295024 Jy ! Component: 300 - total flux cleaned = -0.00303847 Jy ! Component: 350 - total flux cleaned = -0.00315253 Jy ! Component: 400 - total flux cleaned = -0.00320814 Jy ! Component: 450 - total flux cleaned = -0.00339925 Jy ! Component: 500 - total flux cleaned = -0.0035332 Jy ! Component: 550 - total flux cleaned = -0.00366516 Jy ! Component: 600 - total flux cleaned = -0.0038212 Jy ! Component: 650 - total flux cleaned = -0.00400087 Jy ! Component: 700 - total flux cleaned = -0.00415252 Jy ! Component: 750 - total flux cleaned = -0.00427747 Jy ! Component: 800 - total flux cleaned = -0.00440085 Jy ! Component: 850 - total flux cleaned = -0.00442524 Jy ! Component: 900 - total flux cleaned = -0.00452208 Jy ! Component: 950 - total flux cleaned = -0.0045941 Jy ! Component: 1000 - total flux cleaned = -0.00466529 Jy ! Component: 1050 - total flux cleaned = -0.00468873 Jy ! Component: 1100 - total flux cleaned = -0.0047354 Jy ! Component: 1150 - total flux cleaned = -0.00473563 Jy ! Component: 1200 - total flux cleaned = -0.00480448 Jy ! Component: 1250 - total flux cleaned = -0.00482707 Jy ! Component: 1300 - total flux cleaned = -0.00484946 Jy ! Component: 1350 - total flux cleaned = -0.00484912 Jy ! Component: 1400 - total flux cleaned = -0.00484908 Jy ! Component: 1450 - total flux cleaned = -0.00484914 Jy ! Component: 1500 - total flux cleaned = -0.00487092 Jy ! Component: 1550 - total flux cleaned = -0.00484911 Jy ! Component: 1600 - total flux cleaned = -0.00482763 Jy ! Component: 1650 - total flux cleaned = -0.00484904 Jy ! Component: 1700 - total flux cleaned = -0.00482765 Jy ! Component: 1750 - total flux cleaned = -0.00484865 Jy ! Component: 1800 - total flux cleaned = -0.00489045 Jy ! Component: 1850 - total flux cleaned = -0.00491106 Jy ! Component: 1900 - total flux cleaned = -0.00486955 Jy ! Component: 1950 - total flux cleaned = -0.00491069 Jy ! Component: 2000 - total flux cleaned = -0.00486964 Jy ! Component: 2050 - total flux cleaned = -0.00489005 Jy ! Component: 2100 - total flux cleaned = -0.00484951 Jy ! Component: 2150 - total flux cleaned = -0.00484962 Jy ! Component: 2200 - total flux cleaned = -0.00486957 Jy ! Component: 2250 - total flux cleaned = -0.00486965 Jy ! Component: 2300 - total flux cleaned = -0.00490906 Jy ! Component: 2350 - total flux cleaned = -0.00490889 Jy ! Component: 2400 - total flux cleaned = -0.00488945 Jy ! Component: 2450 - total flux cleaned = -0.00492833 Jy ! Component: 2500 - total flux cleaned = -0.00492814 Jy ! Component: 2550 - total flux cleaned = -0.00487066 Jy ! Component: 2600 - total flux cleaned = -0.00485166 Jy ! Component: 2650 - total flux cleaned = -0.0048897 Jy ! Component: 2700 - total flux cleaned = -0.00487067 Jy ! Component: 2750 - total flux cleaned = -0.00487073 Jy ! Component: 2800 - total flux cleaned = -0.00479568 Jy ! Component: 2850 - total flux cleaned = -0.00483298 Jy ! Component: 2900 - total flux cleaned = -0.00481431 Jy ! Component: 2950 - total flux cleaned = -0.00475878 Jy ! Component: 3000 - total flux cleaned = -0.0047773 Jy ! Component: 3050 - total flux cleaned = -0.00481396 Jy ! Component: 3100 - total flux cleaned = -0.00474076 Jy ! Component: 3150 - total flux cleaned = -0.00472264 Jy ! Component: 3200 - total flux cleaned = -0.00466827 Jy ! Component: 3250 - total flux cleaned = -0.00465034 Jy ! Component: 3300 - total flux cleaned = -0.00465027 Jy ! Component: 3350 - total flux cleaned = -0.00463226 Jy ! Component: 3400 - total flux cleaned = -0.00459659 Jy ! Component: 3450 - total flux cleaned = -0.00456094 Jy ! Component: 3500 - total flux cleaned = -0.00457874 Jy ! Component: 3550 - total flux cleaned = -0.00452572 Jy ! Component: 3600 - total flux cleaned = -0.00452567 Jy ! Component: 3650 - total flux cleaned = -0.00456067 Jy ! Component: 3700 - total flux cleaned = -0.00450824 Jy ! Component: 3750 - total flux cleaned = -0.00445609 Jy ! Component: 3800 - total flux cleaned = -0.00452563 Jy ! Component: 3850 - total flux cleaned = -0.00450832 Jy ! Component: 3900 - total flux cleaned = -0.00449115 Jy ! Component: 3950 - total flux cleaned = -0.00445669 Jy ! Component: 4000 - total flux cleaned = -0.00443973 Jy ! Component: 4050 - total flux cleaned = -0.00443979 Jy ! Total flux subtracted in 4096 components = -0.00450796 Jy ! Clean residual min=-0.000973 max=0.001086 Jy/beam ! Clean residual mean=0.000004 rms=0.000314 Jy/beam ! Combined flux in latest and established models = 0.0775865 Jy keep ! Adding 268 model components to the UV plane model. ! The established model now contains 336 components and 0.0775864 Jy ![Exited script file: muppet] wmap "J1628-0041_S_2017_05_27_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.637 x 8.058 at 2.409 degrees (North through East) ! Clean map min=-0.0024703 max=0.081694 Jy/beam ! Writing clean map to FITS file: J1628-0041_S_2017_05_27_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.0816944 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000312972 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -1.1493 1.1493 2.29861 4.59721 9.19443 18.3889 36.7777 73.5554 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0009 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.081 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.637 x 8.058 at 2.409 degrees (North through East) ! Clean map min=-0.0024703 max=0.081694 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J1628-0041_S_2017_05_27_pus_uvs.log closed on Fri May 3 11:10:43 2019