! Started logfile: J1625-2527_S_2017_10_09_pus_uvs.log on Sun May 12 13:16:04 2019 obs J1625-2527_S_2017_10_09_pus_uva.fits ! Reading UV FITS file: J1625-2527_S_2017_10_09_pus_uva.fits ! AN table 1: 13 integrations on 36 of 36 possible baselines. ! Apparent sampling: 0.510684 visibilities/baseline/integration-bin. ! Found source: J1625-2527 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 496 lines of history. ! ! Reading 956 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J1625-2527_S_2017_10_09_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 32 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 45 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 45 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 90 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.386732Jy sigma=0.002473 ! Fit after self-cal, rms=0.353202Jy sigma=0.002232 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=4.743 mas, bmaj=32.98 mas, bpa=-14.04 degrees ! Estimated noise=5635.78 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.938104 Jy ! Component: 100 - total flux cleaned = 1.17557 Jy ! Total flux subtracted in 100 components = 1.17557 Jy ! Clean residual min=-0.064507 max=0.098719 Jy/beam ! Clean residual mean=0.002768 rms=0.031421 Jy/beam ! Combined flux in latest and established models = 1.17557 Jy ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 13 components and 1.17557 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.253412Jy sigma=0.001528 ! Fit after self-cal, rms=0.253430Jy sigma=0.001528 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=5.433 mas, bmaj=36.43 mas, bpa=-15.16 degrees ! Estimated noise=4402.96 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.115166 Jy ! Component: 100 - total flux cleaned = 0.177658 Jy ! Component: 150 - total flux cleaned = 0.218715 Jy ! Component: 200 - total flux cleaned = 0.246583 Jy ! Total flux subtracted in 200 components = 0.246583 Jy ! Clean residual min=-0.038398 max=0.038370 Jy/beam ! Clean residual mean=0.000831 rms=0.011396 Jy/beam ! Combined flux in latest and established models = 1.42215 Jy ! Performing phase self-cal ! Adding 102 model components to the UV plane model. ! The established model now contains 113 components and 1.42215 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.185989Jy sigma=0.001115 ! Fit after self-cal, rms=0.186014Jy sigma=0.001115 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.02 FD 0.93 HN 1.01 KP 1.09 ! LA 1.01 MK 1.00* NL 0.88 OV 1.00* ! PT 1.01 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00 HN 1.04 KP 1.05 ! LA 0.98 MK 1.00* NL 1.08 OV 1.00* ! PT 0.98 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.02 HN 1.03 KP 0.92 ! LA 0.77 MK 1.00* NL 1.14 OV 1.00* ! PT 0.98 ! ! ! Correcting IF 4. ! A total of 27 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.00* FD 0.00* HN 0.00* KP 0.00* ! LA 0.00* MK 0.00* NL 0.00* OV 0.00* ! PT 0.00* ! ! ! Fit before self-cal, rms=0.186014Jy sigma=0.001115 ! Fit after self-cal, rms=0.101829Jy sigma=0.000654 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=5.63 mas, bmaj=36.3 mas, bpa=-15.24 degrees ! Estimated noise=4478.81 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000829164 Jy ! Component: 100 - total flux cleaned = 0.00035302 Jy ! Component: 150 - total flux cleaned = 0.00147798 Jy ! Component: 200 - total flux cleaned = 0.00282538 Jy ! Total flux subtracted in 200 components = 0.00282538 Jy ! Clean residual min=-0.010694 max=0.008635 Jy/beam ! Clean residual mean=0.000064 rms=0.002708 Jy/beam ! Combined flux in latest and established models = 1.42498 Jy ! Performing phase self-cal ! Adding 33 model components to the UV plane model. ! The established model now contains 146 components and 1.42498 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.100739Jy sigma=0.000648 ! Fit after self-cal, rms=0.100705Jy sigma=0.000648 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.100705Jy sigma=0.000648 ! Fit after self-cal, rms=0.100753Jy sigma=0.000647 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=5.633 mas, bmaj=36.3 mas, bpa=-15.24 degrees ! Estimated noise=4482.16 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00191193 Jy ! Component: 100 - total flux cleaned = 0.00310864 Jy ! Component: 150 - total flux cleaned = 0.00379168 Jy ! Component: 200 - total flux cleaned = 0.00428744 Jy ! Total flux subtracted in 200 components = 0.00428744 Jy ! Clean residual min=-0.009307 max=0.007307 Jy/beam ! Clean residual mean=0.000055 rms=0.002351 Jy/beam ! Combined flux in latest and established models = 1.42927 Jy selfcal ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 156 components and 1.42927 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.100412Jy sigma=0.000646 ! Fit after self-cal, rms=0.100408Jy sigma=0.000645 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00024125 Jy ! Component: 100 - total flux cleaned = 0.000407537 Jy ! Component: 150 - total flux cleaned = 0.000640762 Jy ! Component: 200 - total flux cleaned = 0.000860736 Jy ! Total flux subtracted in 200 components = 0.000860736 Jy ! Clean residual min=-0.008701 max=0.007020 Jy/beam ! Clean residual mean=0.000054 rms=0.002227 Jy/beam ! Combined flux in latest and established models = 1.43013 Jy ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 168 components and 1.43013 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.100277Jy sigma=0.000645 ! Fit after self-cal, rms=0.100274Jy sigma=0.000645 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.100274Jy sigma=0.000645 ! Fit after self-cal, rms=0.100278Jy sigma=0.000644 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=5.634 mas, bmaj=36.31 mas, bpa=-15.24 degrees ! Estimated noise=4483.23 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00134798 Jy ! Component: 100 - total flux cleaned = 0.00181848 Jy ! Component: 150 - total flux cleaned = 0.00222861 Jy ! Component: 200 - total flux cleaned = 0.002475 Jy ! Total flux subtracted in 200 components = 0.002475 Jy ! Clean residual min=-0.007911 max=0.006767 Jy/beam ! Clean residual mean=0.000046 rms=0.002063 Jy/beam ! Combined flux in latest and established models = 1.4326 Jy selfcal ! Performing phase self-cal ! Adding 25 model components to the UV plane model. ! The established model now contains 178 components and 1.4326 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.100168Jy sigma=0.000644 ! Fit after self-cal, rms=0.100165Jy sigma=0.000644 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 5.50848e-05 Jy ! Component: 100 - total flux cleaned = 0.000218666 Jy ! Component: 150 - total flux cleaned = 0.000270423 Jy ! Component: 200 - total flux cleaned = 0.000318165 Jy ! Total flux subtracted in 200 components = 0.000318165 Jy ! Clean residual min=-0.007636 max=0.006708 Jy/beam ! Clean residual mean=0.000046 rms=0.002002 Jy/beam ! Combined flux in latest and established models = 1.43292 Jy ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 182 components and 1.43292 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.100112Jy sigma=0.000643 ! Fit after self-cal, rms=0.100111Jy sigma=0.000643 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.100111Jy sigma=0.000643 ! Fit after self-cal, rms=0.100102Jy sigma=0.000643 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.297 mas, bmaj=36.15 mas, bpa=-17.42 degrees ! Estimated noise=4722.22 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000247927 Jy ! Component: 100 - total flux cleaned = 0.000138002 Jy ! Component: 150 - total flux cleaned = 0.000309415 Jy ! Component: 200 - total flux cleaned = 0.000468122 Jy ! Total flux subtracted in 200 components = 0.000468122 Jy ! Clean residual min=-0.005424 max=0.005155 Jy/beam ! Clean residual mean=0.000057 rms=0.001699 Jy/beam ! Combined flux in latest and established models = 1.43339 Jy selfcal ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 187 components and 1.43339 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.100077Jy sigma=0.000643 ! Fit after self-cal, rms=0.100071Jy sigma=0.000643 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000104283 Jy ! Component: 100 - total flux cleaned = 0.000128127 Jy ! Component: 150 - total flux cleaned = 0.000296866 Jy ! Component: 200 - total flux cleaned = 0.000411434 Jy ! Total flux subtracted in 200 components = 0.000411434 Jy ! Clean residual min=-0.005158 max=0.005071 Jy/beam ! Clean residual mean=0.000059 rms=0.001641 Jy/beam ! Combined flux in latest and established models = 1.4338 Jy ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 190 components and 1.4338 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.100068Jy sigma=0.000643 ! Fit after self-cal, rms=0.100066Jy sigma=0.000643 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=5.635 mas, bmaj=36.31 mas, bpa=-15.24 degrees ! Estimated noise=4482.95 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 5.635 x 36.31 at -15.24 degrees (North through East) ! Clean map min=-0.0073936 max=1.2172 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if ! Performing amp+phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.100066Jy sigma=0.000643 ! Fit after self-cal, rms=0.087389Jy sigma=0.000547 ! Inverting map and beam ! Estimated beam: bmin=5.637 mas, bmaj=36.31 mas, bpa=-15.25 degrees ! Estimated noise=4482.49 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000396565 Jy ! Component: 100 - total flux cleaned = 0.000447307 Jy ! Component: 150 - total flux cleaned = 0.000489588 Jy ! Component: 200 - total flux cleaned = 0.000487151 Jy ! Total flux subtracted in 200 components = 0.000487151 Jy ! Clean residual min=-0.007569 max=0.006520 Jy/beam ! Clean residual mean=0.000061 rms=0.001775 Jy/beam ! Combined flux in latest and established models = 1.43429 Jy ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 205 components and 1.43429 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.087321Jy sigma=0.000547 ! Fit after self-cal, rms=0.087320Jy sigma=0.000547 ! Inverting map ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -2.58207e-05 Jy ! Component: 100 - total flux cleaned = 1.03453e-05 Jy ! Component: 150 - total flux cleaned = 7.92945e-05 Jy ! Component: 200 - total flux cleaned = 0.000112081 Jy ! Total flux subtracted in 200 components = 0.000112081 Jy ! Clean residual min=-0.007454 max=0.006483 Jy/beam ! Clean residual mean=0.000061 rms=0.001758 Jy/beam ! Combined flux in latest and established models = 1.4344 Jy ! Performing phase self-cal ! Adding 25 model components to the UV plane model. ! The established model now contains 220 components and 1.4344 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.087286Jy sigma=0.000547 ! Fit after self-cal, rms=0.087287Jy sigma=0.000547 ! Inverting map ! Performing amp+phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.087287Jy sigma=0.000547 ! Fit after self-cal, rms=0.087273Jy sigma=0.000547 print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=4.955 mas, bmaj=32.79 mas, bpa=-14.16 degrees ! Estimated noise=5706.45 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.938487 Jy ! Component: 100 - total flux cleaned = 1.16496 Jy ! Component: 150 - total flux cleaned = 1.25695 Jy ! Component: 200 - total flux cleaned = 1.29973 Jy ! Total flux subtracted in 200 components = 1.29973 Jy ! Clean residual min=-0.017558 max=0.028655 Jy/beam ! Clean residual mean=0.000516 rms=0.008591 Jy/beam ! Combined flux in latest and established models = 1.29973 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 51 model components to the UV plane model. ! The established model now contains 51 components and 1.29973 Jy ! Inverting map and beam ! Estimated beam: bmin=5.637 mas, bmaj=36.32 mas, bpa=-15.25 degrees ! Estimated noise=4481.3 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0381261 Jy ! Component: 100 - total flux cleaned = 0.0627624 Jy ! Component: 150 - total flux cleaned = 0.0795663 Jy ! Component: 200 - total flux cleaned = 0.0916649 Jy ! Total flux subtracted in 200 components = 0.0916649 Jy ! Clean residual min=-0.011488 max=0.011354 Jy/beam ! Clean residual mean=0.000048 rms=0.003481 Jy/beam ! Combined flux in latest and established models = 1.39139 Jy ! Adding 139 model components to the UV plane model. ! The established model now contains 184 components and 1.3914 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.297 mas, bmaj=36.18 mas, bpa=-17.43 degrees ! Estimated noise=4719.98 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0115968 Jy ! Component: 100 - total flux cleaned = 0.0196451 Jy ! Component: 150 - total flux cleaned = 0.0255028 Jy ! Component: 200 - total flux cleaned = 0.0298856 Jy ! Total flux subtracted in 200 components = 0.0298856 Jy ! Clean residual min=-0.006633 max=0.005860 Jy/beam ! Clean residual mean=0.000075 rms=0.001957 Jy/beam ! Combined flux in latest and established models = 1.42128 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00332802 Jy ! Component: 100 - total flux cleaned = 0.00578485 Jy ! Component: 150 - total flux cleaned = 0.00685512 Jy ! Component: 200 - total flux cleaned = 0.00781714 Jy ! Total flux subtracted in 200 components = 0.00781714 Jy ! Clean residual min=-0.005265 max=0.005217 Jy/beam ! Clean residual mean=0.000082 rms=0.001600 Jy/beam ! Combined flux in latest and established models = 1.4291 Jy ! Adding 115 model components to the UV plane model. ! The established model now contains 295 components and 1.4291 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=5.637 mas, bmaj=36.32 mas, bpa=-15.25 degrees ! Estimated noise=4481.3 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00109148 Jy ! Component: 100 - total flux cleaned = 0.00160283 Jy ! Component: 150 - total flux cleaned = 0.00166044 Jy ! Component: 200 - total flux cleaned = 0.00176269 Jy ! Total flux subtracted in 200 components = 0.00176269 Jy ! Clean residual min=-0.006965 max=0.006504 Jy/beam ! Clean residual mean=0.000060 rms=0.001809 Jy/beam ! Combined flux in latest and established models = 1.43086 Jy selfcal ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 312 components and 1.43086 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.087322Jy sigma=0.000547 ! Fit after self-cal, rms=0.087298Jy sigma=0.000547 wmodel J1625-2527_S_2017_10_09_pus_map.mod ! Writing 312 model components to file: J1625-2527_S_2017_10_09_pus_map.mod wobs J1625-2527_S_2017_10_09_pus_uvs.fits ! Writing UV FITS file: J1625-2527_S_2017_10_09_pus_uvs.fits wwins J1625-2527_S_2017_10_09_pus_map.win ! wwins: Wrote 1 windows to J1625-2527_S_2017_10_09_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.00110217 Jy ! Component: 100 - total flux cleaned = -0.00163331 Jy ! Component: 150 - total flux cleaned = -0.0020082 Jy ! Component: 200 - total flux cleaned = -0.00201078 Jy ! Component: 250 - total flux cleaned = -0.00177035 Jy ! Component: 300 - total flux cleaned = -0.00169432 Jy ! Component: 350 - total flux cleaned = -0.00155224 Jy ! Component: 400 - total flux cleaned = -0.00142064 Jy ! Component: 450 - total flux cleaned = -0.00122865 Jy ! Component: 500 - total flux cleaned = -0.000923357 Jy ! Component: 550 - total flux cleaned = -0.00074802 Jy ! Component: 600 - total flux cleaned = -0.000804096 Jy ! Component: 650 - total flux cleaned = -0.000695163 Jy ! Component: 700 - total flux cleaned = -0.00048457 Jy ! Component: 750 - total flux cleaned = -0.00043239 Jy ! Component: 800 - total flux cleaned = -0.000282434 Jy ! Component: 850 - total flux cleaned = -0.000330165 Jy ! Component: 900 - total flux cleaned = -0.000235615 Jy ! Component: 950 - total flux cleaned = -0.000143258 Jy ! Component: 1000 - total flux cleaned = -0.000188037 Jy ! Component: 1050 - total flux cleaned = -0.000231924 Jy ! Component: 1100 - total flux cleaned = -0.000360347 Jy ! Component: 1150 - total flux cleaned = -0.000401892 Jy ! Component: 1200 - total flux cleaned = -0.000401477 Jy ! Component: 1250 - total flux cleaned = -0.000442018 Jy ! Component: 1300 - total flux cleaned = -0.000522791 Jy ! Component: 1350 - total flux cleaned = -0.00064265 Jy ! Component: 1400 - total flux cleaned = -0.000802159 Jy ! Component: 1450 - total flux cleaned = -0.00088157 Jy ! Component: 1500 - total flux cleaned = -0.000881345 Jy ! Component: 1550 - total flux cleaned = -0.000962919 Jy ! Component: 1600 - total flux cleaned = -0.000962584 Jy ! Component: 1650 - total flux cleaned = -0.0010455 Jy ! Component: 1700 - total flux cleaned = -0.0010874 Jy ! Component: 1750 - total flux cleaned = -0.00121442 Jy ! Component: 1800 - total flux cleaned = -0.00117176 Jy ! Component: 1850 - total flux cleaned = -0.00108285 Jy ! Component: 1900 - total flux cleaned = -0.000991547 Jy ! Component: 1950 - total flux cleaned = -0.000944023 Jy ! Component: 2000 - total flux cleaned = -0.000896539 Jy ! Component: 2050 - total flux cleaned = -0.000896355 Jy ! Component: 2100 - total flux cleaned = -0.00084646 Jy ! Component: 2150 - total flux cleaned = -0.000845799 Jy ! Component: 2200 - total flux cleaned = -0.000844939 Jy ! Component: 2250 - total flux cleaned = -0.000844172 Jy ! Component: 2300 - total flux cleaned = -0.00084441 Jy ! Component: 2350 - total flux cleaned = -0.000844992 Jy ! Component: 2400 - total flux cleaned = -0.000845997 Jy ! Component: 2450 - total flux cleaned = -0.000726329 Jy ! Component: 2500 - total flux cleaned = -0.000787364 Jy ! Component: 2550 - total flux cleaned = -0.000725289 Jy ! Component: 2600 - total flux cleaned = -0.00072387 Jy ! Component: 2650 - total flux cleaned = -0.000723988 Jy ! Component: 2700 - total flux cleaned = -0.000654007 Jy ! Component: 2750 - total flux cleaned = -0.000652428 Jy ! Component: 2800 - total flux cleaned = -0.000578964 Jy ! Component: 2850 - total flux cleaned = -0.000503511 Jy ! Component: 2900 - total flux cleaned = -0.000502827 Jy ! Component: 2950 - total flux cleaned = -0.000423863 Jy ! Component: 3000 - total flux cleaned = -0.000423378 Jy ! Component: 3050 - total flux cleaned = -0.000424621 Jy ! Component: 3100 - total flux cleaned = -0.000337006 Jy ! Component: 3150 - total flux cleaned = -0.000337529 Jy ! Component: 3200 - total flux cleaned = -0.000244331 Jy ! Component: 3250 - total flux cleaned = -0.000243642 Jy ! Component: 3300 - total flux cleaned = -0.000242694 Jy ! Component: 3350 - total flux cleaned = -0.000142044 Jy ! Component: 3400 - total flux cleaned = -3.81374e-05 Jy ! Component: 3450 - total flux cleaned = -3.79822e-05 Jy ! Component: 3500 - total flux cleaned = 7.33025e-05 Jy ! Component: 3550 - total flux cleaned = 7.25875e-05 Jy ! Component: 3600 - total flux cleaned = 0.000190959 Jy ! Component: 3650 - total flux cleaned = 0.000314253 Jy ! Component: 3700 - total flux cleaned = 0.000314611 Jy ! Component: 3750 - total flux cleaned = 0.000444167 Jy ! Component: 3800 - total flux cleaned = 0.000446015 Jy ! Component: 3850 - total flux cleaned = 0.000447649 Jy ! Component: 3900 - total flux cleaned = 0.000588653 Jy ! Component: 3950 - total flux cleaned = 0.000589672 Jy ! Component: 4000 - total flux cleaned = 0.00058842 Jy ! Component: 4050 - total flux cleaned = 0.000745429 Jy ! Total flux subtracted in 4096 components = 0.000584182 Jy ! Clean residual min=-0.008643 max=0.008647 Jy/beam ! Clean residual mean=0.000009 rms=0.002638 Jy/beam ! Combined flux in latest and established models = 1.43144 Jy keep ! Adding 160 model components to the UV plane model. ! The established model now contains 472 components and 1.43144 Jy ![Exited script file: muppet] wmap "J1625-2527_S_2017_10_09_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 5.637 x 36.32 at -15.25 degrees (North through East) ! Clean map min=-0.019627 max=1.2232 Jy/beam ! Writing clean map to FITS file: J1625-2527_S_2017_10_09_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 1.22324 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.00257285 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.630989 0.630989 1.26198 2.52396 5.04791 10.0958 20.1916 40.3833 80.7666 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0077 print "peak=",int(1000*peak_flux)/1000 ! peak= 1.223 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 5.637 x 36.32 at -15.25 degrees (North through East) ! Clean map min=-0.019627 max=1.2232 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J1625-2527_S_2017_10_09_pus_uvs.log closed on Sun May 12 13:16:09 2019