! Started logfile: J1625-2527_S_2017_08_05_pus_uvs.log on Thu May 9 19:33:52 2019 obs J1625-2527_S_2017_08_05_pus_uva.fits ! Reading UV FITS file: J1625-2527_S_2017_08_05_pus_uva.fits ! AN table 1: 13 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.42735 visibilities/baseline/integration-bin. ! *** This seems a bit low - see "help observe" on the binwid argument. ! Found source: J1625-2527 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 513 lines of history. ! ! Reading 1000 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J1625-2527_S_2017_08_05_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 43 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 43 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 43 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 130 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.237553Jy sigma=0.001440 ! Fit after self-cal, rms=0.236568Jy sigma=0.001430 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.137 mas, bmaj=12.24 mas, bpa=7.823 degrees ! Estimated noise=4241.52 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.772627 Jy ! Component: 100 - total flux cleaned = 0.954828 Jy ! Total flux subtracted in 100 components = 0.954828 Jy ! Clean residual min=-0.050374 max=0.087472 Jy/beam ! Clean residual mean=0.000274 rms=0.020399 Jy/beam ! Combined flux in latest and established models = 0.954828 Jy ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 11 components and 0.954828 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.246285Jy sigma=0.001465 ! Fit after self-cal, rms=0.246256Jy sigma=0.001465 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.565 mas, bmaj=13.13 mas, bpa=7.44 degrees ! Estimated noise=3776.02 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.113788 Jy ! Component: 100 - total flux cleaned = 0.176504 Jy ! Component: 150 - total flux cleaned = 0.213423 Jy ! Component: 200 - total flux cleaned = 0.235442 Jy ! Total flux subtracted in 200 components = 0.235442 Jy ! Clean residual min=-0.037537 max=0.032989 Jy/beam ! Clean residual mean=-0.000057 rms=0.009352 Jy/beam ! Combined flux in latest and established models = 1.19027 Jy ! Performing phase self-cal ! Adding 57 model components to the UV plane model. ! The established model now contains 64 components and 1.19027 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.176188Jy sigma=0.001042 ! Fit after self-cal, rms=0.176189Jy sigma=0.001042 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* HN 1.03 KP 1.07 ! LA 1.02 MK 1.00* NL 0.89 OV 1.03 ! PT 1.03 SC 0.95 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* HN 1.06 KP 1.02 ! LA 0.98 MK 1.00* NL 1.02 OV 1.05 ! PT 1.00 SC 1.04 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* HN 1.06 KP 0.89 ! LA 0.75 MK 1.00* NL 1.15 OV 0.96 ! PT 0.98 SC 1.03 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 0.00* FD 0.00* HN 0.00* KP 0.00* ! LA 0.00* MK 0.00* NL 0.00* OV 0.00* ! PT 0.00* SC 0.00* ! ! ! Fit before self-cal, rms=0.176189Jy sigma=0.001042 ! Fit after self-cal, rms=0.101211Jy sigma=0.000672 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.581 mas, bmaj=13.28 mas, bpa=7.569 degrees ! Estimated noise=3755.98 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.0067564 Jy ! Component: 100 - total flux cleaned = -0.00814923 Jy ! Component: 150 - total flux cleaned = -0.00876405 Jy ! Component: 200 - total flux cleaned = -0.00918873 Jy ! Total flux subtracted in 200 components = -0.00918873 Jy ! Clean residual min=-0.012975 max=0.009665 Jy/beam ! Clean residual mean=0.000005 rms=0.003101 Jy/beam ! Combined flux in latest and established models = 1.18108 Jy ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 74 components and 1.18108 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.100693Jy sigma=0.000670 ! Fit after self-cal, rms=0.100664Jy sigma=0.000669 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.100664Jy sigma=0.000669 ! Fit after self-cal, rms=0.100593Jy sigma=0.000668 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.581 mas, bmaj=13.31 mas, bpa=7.6 degrees ! Estimated noise=3754.4 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00440513 Jy ! Component: 100 - total flux cleaned = -0.00534159 Jy ! Component: 150 - total flux cleaned = -0.00578353 Jy ! Component: 200 - total flux cleaned = -0.00597614 Jy ! Total flux subtracted in 200 components = -0.00597614 Jy ! Clean residual min=-0.012052 max=0.009418 Jy/beam ! Clean residual mean=-0.000001 rms=0.002882 Jy/beam ! Combined flux in latest and established models = 1.17511 Jy selfcal ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 80 components and 1.17511 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.100339Jy sigma=0.000667 ! Fit after self-cal, rms=0.100340Jy sigma=0.000667 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -6.18353e-05 Jy ! Component: 100 - total flux cleaned = -0.000117183 Jy ! Component: 150 - total flux cleaned = -0.000169268 Jy ! Component: 200 - total flux cleaned = -0.00016883 Jy ! Total flux subtracted in 200 components = -0.00016883 Jy ! Clean residual min=-0.011928 max=0.009448 Jy/beam ! Clean residual mean=-0.000001 rms=0.002863 Jy/beam ! Combined flux in latest and established models = 1.17494 Jy ! Performing phase self-cal ! Adding 8 model components to the UV plane model. ! The established model now contains 84 components and 1.17494 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.100289Jy sigma=0.000666 ! Fit after self-cal, rms=0.100289Jy sigma=0.000666 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.100289Jy sigma=0.000666 ! Fit after self-cal, rms=0.100343Jy sigma=0.000666 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.582 mas, bmaj=13.33 mas, bpa=7.621 degrees ! Estimated noise=3754.02 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00306126 Jy ! Component: 100 - total flux cleaned = -0.00366438 Jy ! Component: 150 - total flux cleaned = -0.00392067 Jy ! Component: 200 - total flux cleaned = -0.00403405 Jy ! Total flux subtracted in 200 components = -0.00403405 Jy ! Clean residual min=-0.011287 max=0.009049 Jy/beam ! Clean residual mean=-0.000006 rms=0.002741 Jy/beam ! Combined flux in latest and established models = 1.1709 Jy selfcal ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 90 components and 1.1709 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.100199Jy sigma=0.000665 ! Fit after self-cal, rms=0.100201Jy sigma=0.000665 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000108246 Jy ! Component: 100 - total flux cleaned = -0.000158504 Jy ! Component: 150 - total flux cleaned = -0.000205578 Jy ! Component: 200 - total flux cleaned = -0.000203553 Jy ! Total flux subtracted in 200 components = -0.000203553 Jy ! Clean residual min=-0.011209 max=0.009029 Jy/beam ! Clean residual mean=-0.000006 rms=0.002724 Jy/beam ! Combined flux in latest and established models = 1.1707 Jy ! Performing phase self-cal ! Adding 8 model components to the UV plane model. ! The established model now contains 94 components and 1.1707 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.100157Jy sigma=0.000665 ! Fit after self-cal, rms=0.100157Jy sigma=0.000665 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.100157Jy sigma=0.000665 ! Fit after self-cal, rms=0.100225Jy sigma=0.000665 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.062 mas, bmaj=18.44 mas, bpa=-4.106 degrees ! Estimated noise=4597.79 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000857895 Jy ! Component: 100 - total flux cleaned = -0.000864078 Jy ! Component: 150 - total flux cleaned = -0.000862076 Jy ! Component: 200 - total flux cleaned = -0.000824368 Jy ! Total flux subtracted in 200 components = -0.000824368 Jy ! Clean residual min=-0.009928 max=0.009525 Jy/beam ! Clean residual mean=-0.000024 rms=0.003535 Jy/beam ! Combined flux in latest and established models = 1.16988 Jy selfcal ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 102 components and 1.16988 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.100213Jy sigma=0.000665 ! Fit after self-cal, rms=0.100213Jy sigma=0.000665 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 9.10164e-05 Jy ! Component: 100 - total flux cleaned = 0.00012869 Jy ! Component: 150 - total flux cleaned = 0.000163476 Jy ! Component: 200 - total flux cleaned = 0.000196301 Jy ! Total flux subtracted in 200 components = 0.000196301 Jy ! Clean residual min=-0.009801 max=0.009446 Jy/beam ! Clean residual mean=-0.000025 rms=0.003521 Jy/beam ! Combined flux in latest and established models = 1.17007 Jy ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 104 components and 1.17007 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.100213Jy sigma=0.000665 ! Fit after self-cal, rms=0.100209Jy sigma=0.000665 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.583 mas, bmaj=13.35 mas, bpa=7.634 degrees ! Estimated noise=3753.36 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.583 x 13.35 at 7.634 degrees (North through East) ! Clean map min=-0.010332 max=0.99837 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if ! Performing amp+phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.100209Jy sigma=0.000665 ! Fit after self-cal, rms=0.090761Jy sigma=0.000593 ! Inverting map and beam ! Estimated beam: bmin=3.585 mas, bmaj=13.35 mas, bpa=7.618 degrees ! Estimated noise=3752.39 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00258617 Jy ! Component: 100 - total flux cleaned = -0.00317994 Jy ! Component: 150 - total flux cleaned = -0.00345742 Jy ! Component: 200 - total flux cleaned = -0.00355593 Jy ! Total flux subtracted in 200 components = -0.00355593 Jy ! Clean residual min=-0.010324 max=0.008757 Jy/beam ! Clean residual mean=-0.000006 rms=0.002616 Jy/beam ! Combined flux in latest and established models = 1.16652 Jy ! Performing phase self-cal ! Adding 24 model components to the UV plane model. ! The established model now contains 115 components and 1.16652 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.090643Jy sigma=0.000593 ! Fit after self-cal, rms=0.090641Jy sigma=0.000593 ! Inverting map ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000221736 Jy ! Component: 100 - total flux cleaned = -0.000220737 Jy ! Component: 150 - total flux cleaned = -0.000222391 Jy ! Component: 200 - total flux cleaned = -0.000222745 Jy ! Total flux subtracted in 200 components = -0.000222745 Jy ! Clean residual min=-0.010204 max=0.008680 Jy/beam ! Clean residual mean=-0.000005 rms=0.002600 Jy/beam ! Combined flux in latest and established models = 1.16629 Jy ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 120 components and 1.16629 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.090601Jy sigma=0.000592 ! Fit after self-cal, rms=0.090601Jy sigma=0.000592 ! Inverting map ! Performing amp+phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.090601Jy sigma=0.000592 ! Fit after self-cal, rms=0.090667Jy sigma=0.000592 print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.145 mas, bmaj=12.46 mas, bpa=8.007 degrees ! Estimated noise=4256.46 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.775299 Jy ! Component: 100 - total flux cleaned = 0.956396 Jy ! Component: 150 - total flux cleaned = 1.03535 Jy ! Component: 200 - total flux cleaned = 1.0799 Jy ! Total flux subtracted in 200 components = 1.0799 Jy ! Clean residual min=-0.016254 max=0.032333 Jy/beam ! Clean residual mean=0.000100 rms=0.006570 Jy/beam ! Combined flux in latest and established models = 1.0799 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 37 model components to the UV plane model. ! The established model now contains 37 components and 1.0799 Jy ! Inverting map and beam ! Estimated beam: bmin=3.586 mas, bmaj=13.37 mas, bpa=7.627 degrees ! Estimated noise=3751.69 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-44, 76.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.036942 Jy ! Component: 100 - total flux cleaned = 0.0557793 Jy ! Component: 150 - total flux cleaned = 0.0674686 Jy ! Component: 200 - total flux cleaned = 0.0750843 Jy ! Total flux subtracted in 200 components = 0.0750843 Jy ! Clean residual min=-0.009081 max=0.007578 Jy/beam ! Clean residual mean=0.000006 rms=0.002436 Jy/beam ! Combined flux in latest and established models = 1.15498 Jy ! Adding 75 model components to the UV plane model. ! The established model now contains 104 components and 1.15498 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.07 mas, bmaj=18.5 mas, bpa=-4.146 degrees ! Estimated noise=4587.94 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00807729 Jy ! Component: 100 - total flux cleaned = 0.0122727 Jy ! Component: 150 - total flux cleaned = 0.0148932 Jy ! Component: 200 - total flux cleaned = 0.0166205 Jy ! Total flux subtracted in 200 components = 0.0166205 Jy ! Clean residual min=-0.007120 max=0.008246 Jy/beam ! Clean residual mean=-0.000057 rms=0.002999 Jy/beam ! Combined flux in latest and established models = 1.1716 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000618979 Jy ! Component: 100 - total flux cleaned = 0.000855304 Jy ! Component: 150 - total flux cleaned = 0.00108038 Jy ! Component: 200 - total flux cleaned = 0.00129591 Jy ! Total flux subtracted in 200 components = 0.00129591 Jy ! Clean residual min=-0.007145 max=0.008260 Jy/beam ! Clean residual mean=-0.000059 rms=0.002936 Jy/beam ! Combined flux in latest and established models = 1.1729 Jy ! Adding 48 model components to the UV plane model. ! The established model now contains 146 components and 1.1729 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.586 mas, bmaj=13.37 mas, bpa=7.627 degrees ! Estimated noise=3751.69 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00178848 Jy ! Component: 100 - total flux cleaned = -0.00206221 Jy ! Component: 150 - total flux cleaned = -0.00236214 Jy ! Component: 200 - total flux cleaned = -0.00242849 Jy ! Total flux subtracted in 200 components = -0.00242849 Jy ! Clean residual min=-0.007005 max=0.007085 Jy/beam ! Clean residual mean=-0.000027 rms=0.002036 Jy/beam ! Combined flux in latest and established models = 1.17047 Jy selfcal ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 162 components and 1.17047 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.089613Jy sigma=0.000585 ! Fit after self-cal, rms=0.089508Jy sigma=0.000585 wmodel J1625-2527_S_2017_08_05_pus_map.mod ! Writing 162 model components to file: J1625-2527_S_2017_08_05_pus_map.mod wobs J1625-2527_S_2017_08_05_pus_uvs.fits ! Writing UV FITS file: J1625-2527_S_2017_08_05_pus_uvs.fits wwins J1625-2527_S_2017_08_05_pus_map.win ! wwins: Wrote 2 windows to J1625-2527_S_2017_08_05_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.000400019 Jy ! Component: 100 - total flux cleaned = -0.000627559 Jy ! Component: 150 - total flux cleaned = -0.000328965 Jy ! Component: 200 - total flux cleaned = 0.000129484 Jy ! Component: 250 - total flux cleaned = 0.000550744 Jy ! Component: 300 - total flux cleaned = 0.00054892 Jy ! Component: 350 - total flux cleaned = 0.0004732 Jy ! Component: 400 - total flux cleaned = 0.000617578 Jy ! Component: 450 - total flux cleaned = 0.00109501 Jy ! Component: 500 - total flux cleaned = 0.00155204 Jy ! Component: 550 - total flux cleaned = 0.0019923 Jy ! Component: 600 - total flux cleaned = 0.0022958 Jy ! Component: 650 - total flux cleaned = 0.00253025 Jy ! Component: 700 - total flux cleaned = 0.00281449 Jy ! Component: 750 - total flux cleaned = 0.00303419 Jy ! Component: 800 - total flux cleaned = 0.00319433 Jy ! Component: 850 - total flux cleaned = 0.00345453 Jy ! Component: 900 - total flux cleaned = 0.00360532 Jy ! Component: 950 - total flux cleaned = 0.00375365 Jy ! Component: 1000 - total flux cleaned = 0.0039462 Jy ! Component: 1050 - total flux cleaned = 0.00418121 Jy ! Component: 1100 - total flux cleaned = 0.00427322 Jy ! Component: 1150 - total flux cleaned = 0.00440902 Jy ! Component: 1200 - total flux cleaned = 0.00463066 Jy ! Component: 1250 - total flux cleaned = 0.00476009 Jy ! Component: 1300 - total flux cleaned = 0.00501511 Jy ! Component: 1350 - total flux cleaned = 0.00514015 Jy ! Component: 1400 - total flux cleaned = 0.00526354 Jy ! Component: 1450 - total flux cleaned = 0.00546526 Jy ! Component: 1500 - total flux cleaned = 0.00566401 Jy ! Component: 1550 - total flux cleaned = 0.00589854 Jy ! Component: 1600 - total flux cleaned = 0.00605287 Jy ! Component: 1650 - total flux cleaned = 0.00628169 Jy ! Component: 1700 - total flux cleaned = 0.00647078 Jy ! Component: 1750 - total flux cleaned = 0.00673458 Jy ! Component: 1800 - total flux cleaned = 0.00695966 Jy ! Component: 1850 - total flux cleaned = 0.00722213 Jy ! Component: 1900 - total flux cleaned = 0.00740922 Jy ! Component: 1950 - total flux cleaned = 0.00763359 Jy ! Component: 2000 - total flux cleaned = 0.00770866 Jy ! Component: 2050 - total flux cleaned = 0.00797243 Jy ! Component: 2100 - total flux cleaned = 0.0080483 Jy ! Component: 2150 - total flux cleaned = 0.00820096 Jy ! Component: 2200 - total flux cleaned = 0.00827801 Jy ! Component: 2250 - total flux cleaned = 0.00835598 Jy ! Component: 2300 - total flux cleaned = 0.00843474 Jy ! Component: 2350 - total flux cleaned = 0.00851408 Jy ! Component: 2400 - total flux cleaned = 0.00855444 Jy ! Component: 2450 - total flux cleaned = 0.00859495 Jy ! Component: 2500 - total flux cleaned = 0.00867803 Jy ! Component: 2550 - total flux cleaned = 0.00876254 Jy ! Component: 2600 - total flux cleaned = 0.00880564 Jy ! Component: 2650 - total flux cleaned = 0.00884971 Jy ! Component: 2700 - total flux cleaned = 0.00889428 Jy ! Component: 2750 - total flux cleaned = 0.00903257 Jy ! Component: 2800 - total flux cleaned = 0.00903296 Jy ! Component: 2850 - total flux cleaned = 0.00912936 Jy ! Component: 2900 - total flux cleaned = 0.00917801 Jy ! Component: 2950 - total flux cleaned = 0.00922887 Jy ! Component: 3000 - total flux cleaned = 0.00917672 Jy ! Component: 3050 - total flux cleaned = 0.00923031 Jy ! Component: 3100 - total flux cleaned = 0.00917565 Jy ! Component: 3150 - total flux cleaned = 0.00912041 Jy ! Component: 3200 - total flux cleaned = 0.00911969 Jy ! Component: 3250 - total flux cleaned = 0.00911839 Jy ! Component: 3300 - total flux cleaned = 0.0091182 Jy ! Component: 3350 - total flux cleaned = 0.00911821 Jy ! Component: 3400 - total flux cleaned = 0.00905513 Jy ! Component: 3450 - total flux cleaned = 0.00905579 Jy ! Component: 3500 - total flux cleaned = 0.00898904 Jy ! Component: 3550 - total flux cleaned = 0.00885091 Jy ! Component: 3600 - total flux cleaned = 0.0088512 Jy ! Component: 3650 - total flux cleaned = 0.00870596 Jy ! Component: 3700 - total flux cleaned = 0.00863177 Jy ! Component: 3750 - total flux cleaned = 0.00855583 Jy ! Component: 3800 - total flux cleaned = 0.00840031 Jy ! Component: 3850 - total flux cleaned = 0.00823909 Jy ! Component: 3900 - total flux cleaned = 0.00815493 Jy ! Component: 3950 - total flux cleaned = 0.00798414 Jy ! Component: 4000 - total flux cleaned = 0.00780713 Jy ! Component: 4050 - total flux cleaned = 0.00771679 Jy ! Total flux subtracted in 4096 components = 0.00753147 Jy ! Clean residual min=-0.004938 max=0.005471 Jy/beam ! Clean residual mean=0.000022 rms=0.001385 Jy/beam ! Combined flux in latest and established models = 1.178 Jy keep ! Adding 206 model components to the UV plane model. ! The established model now contains 368 components and 1.178 Jy ![Exited script file: muppet] wmap "J1625-2527_S_2017_08_05_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.586 x 13.37 at 7.627 degrees (North through East) ! Clean map min=-0.0094916 max=1.0012 Jy/beam ! Writing clean map to FITS file: J1625-2527_S_2017_08_05_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 1.00115 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.00152021 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.455536 0.455536 0.911072 1.82214 3.64429 7.28858 14.5772 29.1543 58.3086 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0045 print "peak=",int(1000*peak_flux)/1000 ! peak= 1.001 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.586 x 13.37 at 7.627 degrees (North through East) ! Clean map min=-0.0094916 max=1.0012 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J1625-2527_S_2017_08_05_pus_uvs.log closed on Thu May 9 19:33:57 2019