! Started logfile: J1625-2527_S_2017_07_16_pus_uvs.log on Thu May 9 11:13:06 2019 obs J1625-2527_S_2017_07_16_pus_uva.fits ! Reading UV FITS file: J1625-2527_S_2017_07_16_pus_uva.fits ! AN table 1: 15 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.12 visibilities/baseline/integration-bin. ! *** This seems a bit low - see "help observe" on the binwid argument. ! Found source: J1625-2527 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 815 lines of history. ! ! Reading 324 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J1625-2527_S_2017_07_16_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 114 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 114 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 93 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 150 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.572780Jy sigma=0.003192 ! Fit after self-cal, rms=0.273193Jy sigma=0.001315 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.877 mas, bmaj=12.82 mas, bpa=26.54 degrees ! Estimated noise=12627.1 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.628179 Jy ! Component: 100 - total flux cleaned = 0.766389 Jy ! Total flux subtracted in 100 components = 0.766389 Jy ! Clean residual min=-0.074709 max=0.074219 Jy/beam ! Clean residual mean=0.000014 rms=0.035218 Jy/beam ! Combined flux in latest and established models = 0.766389 Jy ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 16 components and 0.766389 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.173469Jy sigma=0.000848 ! Fit after self-cal, rms=0.173535Jy sigma=0.000847 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.177 mas, bmaj=13.13 mas, bpa=29.36 degrees ! Estimated noise=11141.4 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0286089 Jy ! Component: 100 - total flux cleaned = 0.0373014 Jy ! Component: 150 - total flux cleaned = 0.0438207 Jy ! Component: 200 - total flux cleaned = 0.0456325 Jy ! Total flux subtracted in 200 components = 0.0456325 Jy ! Clean residual min=-0.032970 max=0.032586 Jy/beam ! Clean residual mean=0.000011 rms=0.010663 Jy/beam ! Combined flux in latest and established models = 0.812022 Jy ! Performing phase self-cal ! Adding 35 model components to the UV plane model. ! The established model now contains 48 components and 0.812022 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.145970Jy sigma=0.000703 ! Fit after self-cal, rms=0.144577Jy sigma=0.000696 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! A total of 36 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.00* FD 0.00* HN 0.00* KP 0.00* ! LA 0.00* MK 0.00* NL 0.00* OV 0.00* ! PT 0.00* SC 0.00* ! ! ! Correcting IF 2. ! A total of 36 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.00* FD 0.00* HN 0.00* KP 0.00* ! LA 0.00* MK 0.00* NL 0.00* OV 0.00* ! PT 0.00* SC 0.00* ! ! ! Correcting IF 3. ! A total of 9 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.03 FD 1.00* HN 1.00 KP 1.00* ! LA 1.00* MK 1.00* NL 0.95 OV 1.00* ! PT 1.00* SC 0.96 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 0.00* FD 0.00* HN 0.00* KP 0.00* ! LA 0.00* MK 0.00* NL 0.00* OV 0.00* ! PT 0.00* SC 0.00* ! ! ! Fit before self-cal, rms=0.144577Jy sigma=0.000696 ! Fit after self-cal, rms=0.148434Jy sigma=0.000655 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.904 mas, bmaj=12.35 mas, bpa=25.07 degrees ! Estimated noise=16261.9 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00203489 Jy ! Component: 100 - total flux cleaned = 0.00201807 Jy ! Component: 150 - total flux cleaned = -3.98299e-05 Jy ! Component: 200 - total flux cleaned = -0.00133627 Jy ! Total flux subtracted in 200 components = -0.00133627 Jy ! Clean residual min=-0.012550 max=0.012221 Jy/beam ! Clean residual mean=-0.000002 rms=0.003384 Jy/beam ! Combined flux in latest and established models = 0.810685 Jy ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 65 components and 0.810685 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.147032Jy sigma=0.000648 ! Fit after self-cal, rms=0.146935Jy sigma=0.000646 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.146935Jy sigma=0.000646 ! Fit after self-cal, rms=0.144966Jy sigma=0.000645 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.896 mas, bmaj=12.34 mas, bpa=24.99 degrees ! Estimated noise=16192.5 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000725707 Jy ! Component: 100 - total flux cleaned = 0.00257624 Jy ! Component: 150 - total flux cleaned = 0.00509491 Jy ! Component: 200 - total flux cleaned = 0.00464114 Jy ! Total flux subtracted in 200 components = 0.00464114 Jy ! Clean residual min=-0.007259 max=0.007089 Jy/beam ! Clean residual mean=-0.000002 rms=0.001560 Jy/beam ! Combined flux in latest and established models = 0.815327 Jy selfcal ! Performing phase self-cal ! Adding 30 model components to the UV plane model. ! The established model now contains 95 components and 0.815326 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.144580Jy sigma=0.000644 ! Fit after self-cal, rms=0.144583Jy sigma=0.000644 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000177663 Jy ! Component: 100 - total flux cleaned = -0.00137865 Jy ! Component: 150 - total flux cleaned = -0.00330785 Jy ! Component: 200 - total flux cleaned = -0.00323193 Jy ! Total flux subtracted in 200 components = -0.00323193 Jy ! Clean residual min=-0.004540 max=0.004548 Jy/beam ! Clean residual mean=0.000000 rms=0.001164 Jy/beam ! Combined flux in latest and established models = 0.812095 Jy ! Performing phase self-cal ! Adding 29 model components to the UV plane model. ! The established model now contains 124 components and 0.812095 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.144365Jy sigma=0.000643 ! Fit after self-cal, rms=0.144334Jy sigma=0.000643 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.144334Jy sigma=0.000643 ! Fit after self-cal, rms=0.144606Jy sigma=0.000642 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.898 mas, bmaj=12.33 mas, bpa=25.01 degrees ! Estimated noise=16201.9 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000298814 Jy ! Component: 100 - total flux cleaned = 0.000833492 Jy ! Component: 150 - total flux cleaned = 3.48164e-05 Jy ! Component: 200 - total flux cleaned = -0.000716869 Jy ! Total flux subtracted in 200 components = -0.000716869 Jy ! Clean residual min=-0.007343 max=0.006943 Jy/beam ! Clean residual mean=-0.000001 rms=0.001664 Jy/beam ! Combined flux in latest and established models = 0.811378 Jy selfcal ! Performing phase self-cal ! Adding 25 model components to the UV plane model. ! The established model now contains 143 components and 0.811378 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.144224Jy sigma=0.000642 ! Fit after self-cal, rms=0.144191Jy sigma=0.000641 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00222202 Jy ! Component: 100 - total flux cleaned = 0.00207284 Jy ! Component: 150 - total flux cleaned = 0.00189489 Jy ! Component: 200 - total flux cleaned = 0.000918934 Jy ! Total flux subtracted in 200 components = 0.000918934 Jy ! Clean residual min=-0.004714 max=0.004882 Jy/beam ! Clean residual mean=0.000000 rms=0.001151 Jy/beam ! Combined flux in latest and established models = 0.812297 Jy ! Performing phase self-cal ! Adding 35 model components to the UV plane model. ! The established model now contains 178 components and 0.812297 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.144033Jy sigma=0.000640 ! Fit after self-cal, rms=0.144066Jy sigma=0.000640 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.144066Jy sigma=0.000640 ! Fit after self-cal, rms=0.144311Jy sigma=0.000640 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=4.508 mas, bmaj=12.28 mas, bpa=25.11 degrees ! Estimated noise=21025.4 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00232863 Jy ! Component: 100 - total flux cleaned = 0.000322056 Jy ! Component: 150 - total flux cleaned = -0.0020329 Jy ! Component: 200 - total flux cleaned = -0.0045936 Jy ! Total flux subtracted in 200 components = -0.0045936 Jy ! Clean residual min=-0.006280 max=0.006177 Jy/beam ! Clean residual mean=-0.000002 rms=0.001674 Jy/beam ! Combined flux in latest and established models = 0.807703 Jy selfcal ! Performing phase self-cal ! Adding 27 model components to the UV plane model. ! The established model now contains 204 components and 0.807703 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.144170Jy sigma=0.000640 ! Fit after self-cal, rms=0.144155Jy sigma=0.000640 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00140648 Jy ! Component: 100 - total flux cleaned = -0.00273216 Jy ! Component: 150 - total flux cleaned = -0.00376056 Jy ! Component: 200 - total flux cleaned = -0.00554845 Jy ! Total flux subtracted in 200 components = -0.00554845 Jy ! Clean residual min=-0.005777 max=0.005834 Jy/beam ! Clean residual mean=-0.000002 rms=0.001497 Jy/beam ! Combined flux in latest and established models = 0.802155 Jy ! Performing phase self-cal ! Adding 30 model components to the UV plane model. ! The established model now contains 230 components and 0.802155 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.144124Jy sigma=0.000640 ! Fit after self-cal, rms=0.144057Jy sigma=0.000639 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=2.902 mas, bmaj=12.32 mas, bpa=25.01 degrees ! Estimated noise=16233.8 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.902 x 12.32 at 25.01 degrees (North through East) ! Clean map min=-0.02515 max=0.62485 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if ! Performing amp+phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.144057Jy sigma=0.000639 ! Fit after self-cal, rms=0.111116Jy sigma=0.000469 ! Inverting map and beam ! Estimated beam: bmin=2.898 mas, bmaj=12.32 mas, bpa=24.94 degrees ! Estimated noise=16176.8 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000663584 Jy ! Component: 100 - total flux cleaned = 0.0018691 Jy ! Component: 150 - total flux cleaned = 0.00202085 Jy ! Component: 200 - total flux cleaned = 0.00202178 Jy ! Total flux subtracted in 200 components = 0.00202178 Jy ! Clean residual min=-0.004378 max=0.004251 Jy/beam ! Clean residual mean=0.000000 rms=0.001096 Jy/beam ! Combined flux in latest and established models = 0.804176 Jy ! Performing phase self-cal ! Adding 34 model components to the UV plane model. ! The established model now contains 264 components and 0.804176 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.110693Jy sigma=0.000468 ! Fit after self-cal, rms=0.110746Jy sigma=0.000468 ! Inverting map ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00281438 Jy ! Component: 100 - total flux cleaned = -0.00246935 Jy ! Component: 150 - total flux cleaned = -0.00217279 Jy ! Component: 200 - total flux cleaned = -0.00198147 Jy ! Total flux subtracted in 200 components = -0.00198147 Jy ! Clean residual min=-0.003646 max=0.003685 Jy/beam ! Clean residual mean=-0.000001 rms=0.000972 Jy/beam ! Combined flux in latest and established models = 0.802195 Jy ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 282 components and 0.802195 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.110751Jy sigma=0.000467 ! Fit after self-cal, rms=0.110695Jy sigma=0.000467 ! Inverting map ! Performing amp+phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.110695Jy sigma=0.000467 ! Fit after self-cal, rms=0.110206Jy sigma=0.000466 print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.898 mas, bmaj=12.31 mas, bpa=24.91 degrees ! Estimated noise=16148 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.490739 Jy ! Component: 100 - total flux cleaned = 0.488857 Jy ! Component: 150 - total flux cleaned = 0.488565 Jy ! Component: 200 - total flux cleaned = 0.514414 Jy ! Total flux subtracted in 200 components = 0.514414 Jy ! Clean residual min=-0.513463 max=0.531013 Jy/beam ! Clean residual mean=-0.000100 rms=0.110974 Jy/beam ! Combined flux in latest and established models = 0.514414 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 20 model components to the UV plane model. ! The established model now contains 20 components and 0.514414 Jy ! Inverting map and beam ! Estimated beam: bmin=2.898 mas, bmaj=12.31 mas, bpa=24.91 degrees ! Estimated noise=16148 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.194652 Jy ! Component: 100 - total flux cleaned = 0.165688 Jy ! Component: 150 - total flux cleaned = 0.1526 Jy ! Component: 200 - total flux cleaned = 0.127982 Jy ! Total flux subtracted in 200 components = 0.127982 Jy ! Clean residual min=-0.170781 max=0.171191 Jy/beam ! Clean residual mean=0.000007 rms=0.035082 Jy/beam ! Combined flux in latest and established models = 0.642396 Jy ! Adding 27 model components to the UV plane model. ! The established model now contains 46 components and 0.642396 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=4.508 mas, bmaj=12.27 mas, bpa=24.99 degrees ! Estimated noise=20940.5 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0355441 Jy ! Component: 100 - total flux cleaned = 0.0356839 Jy ! Component: 150 - total flux cleaned = 0.0355543 Jy ! Component: 200 - total flux cleaned = 0.0353476 Jy ! Total flux subtracted in 200 components = 0.0353476 Jy ! Clean residual min=-0.080231 max=0.083357 Jy/beam ! Clean residual mean=0.000009 rms=0.023537 Jy/beam ! Combined flux in latest and established models = 0.677744 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000272673 Jy ! Component: 100 - total flux cleaned = -0.000630588 Jy ! Component: 150 - total flux cleaned = -0.00108645 Jy ! Component: 200 - total flux cleaned = -0.00169864 Jy ! Total flux subtracted in 200 components = -0.00169864 Jy ! Clean residual min=-0.261212 max=0.271596 Jy/beam ! Clean residual mean=0.000053 rms=0.082454 Jy/beam ! Combined flux in latest and established models = 0.676045 Jy ! Adding 29 model components to the UV plane model. ! The established model now contains 75 components and 0.676045 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=2.898 mas, bmaj=12.31 mas, bpa=24.91 degrees ! Estimated noise=16148 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.0450741 Jy ! Component: 100 - total flux cleaned = -0.0449353 Jy ! Component: 150 - total flux cleaned = -0.0454608 Jy ! Component: 200 - total flux cleaned = -0.0463341 Jy ! Total flux subtracted in 200 components = -0.0463341 Jy ! Clean residual min=-0.194248 max=0.201374 Jy/beam ! Clean residual mean=0.000000 rms=0.043969 Jy/beam ! Combined flux in latest and established models = 0.629711 Jy selfcal ! Performing phase self-cal ! Adding 29 model components to the UV plane model. ! The established model now contains 100 components and 0.629711 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.165273Jy sigma=0.000852 ! Fit after self-cal, rms=0.154186Jy sigma=0.000811 wmodel J1625-2527_S_2017_07_16_pus_map.mod ! Writing 100 model components to file: J1625-2527_S_2017_07_16_pus_map.mod wobs J1625-2527_S_2017_07_16_pus_uvs.fits ! Writing UV FITS file: J1625-2527_S_2017_07_16_pus_uvs.fits wwins J1625-2527_S_2017_07_16_pus_map.win ! wwins: No CLEAN windows to write. ! Error occured in command: wwins ![Exited script file: muppet] ! wmap "J1625-2527_S_2017_07_16_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.898 x 12.31 at 24.91 degrees (North through East) ! Clean map min=-0.77631 max=0.36422 Jy/beam ! Writing clean map to FITS file: J1625-2527_S_2017_07_16_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.364224 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.0360377 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -29.6832 29.6832 59.3663 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.1081 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.364 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.898 x 12.31 at 24.91 degrees (North through East) ! Clean map min=-0.77631 max=0.36422 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J1625-2527_S_2017_07_16_pus_uvs.log closed on Thu May 9 11:13:10 2019