! Started logfile: J1625-2527_S_2017_06_10_pus_uvs.log on Mon May 6 14:57:50 2019 obs J1625-2527_S_2017_06_10_pus_uva.fits ! Reading UV FITS file: J1625-2527_S_2017_06_10_pus_uva.fits ! AN table 1: 23 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.635749 visibilities/baseline/integration-bin. ! Found source: J1625-2527 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 1154 lines of history. ! ! Reading 2632 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J1625-2527_S_2017_06_10_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 46 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 46 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 46 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 165 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.522866Jy sigma=0.003845 ! Fit after self-cal, rms=0.433541Jy sigma=0.003247 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.756 mas, bmaj=8.354 mas, bpa=-1.927 degrees ! Estimated noise=2770.02 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.728256 Jy ! Component: 100 - total flux cleaned = 0.904664 Jy ! Total flux subtracted in 100 components = 0.904664 Jy ! Clean residual min=-0.100470 max=0.152984 Jy/beam ! Clean residual mean=0.002313 rms=0.034728 Jy/beam ! Combined flux in latest and established models = 0.904664 Jy ! Performing phase self-cal ! Adding 6 model components to the UV plane model. ! The established model now contains 6 components and 0.904664 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.438990Jy sigma=0.003292 ! Fit after self-cal, rms=0.438981Jy sigma=0.003292 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.392 mas, bmaj=9.662 mas, bpa=-2.045 degrees ! Estimated noise=2213.8 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0954171 Jy ! Component: 100 - total flux cleaned = 0.142869 Jy ! Component: 150 - total flux cleaned = 0.168935 Jy ! Component: 200 - total flux cleaned = 0.175739 Jy ! Total flux subtracted in 200 components = 0.175739 Jy ! Clean residual min=-0.082265 max=0.139962 Jy/beam ! Clean residual mean=0.004545 rms=0.036767 Jy/beam ! Combined flux in latest and established models = 1.0804 Jy ! Performing phase self-cal ! Adding 29 model components to the UV plane model. ! The established model now contains 32 components and 1.0804 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.419671Jy sigma=0.003148 ! Fit after self-cal, rms=0.419664Jy sigma=0.003148 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 0.85 HN 1.21 KP 0.91 ! LA 0.89 MK 0.94 NL 0.93 OV 1.73 ! PT 0.89 SC 0.96 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 0.88 HN 1.27 KP 0.87 ! LA 0.84 MK 0.94 NL 1.09 OV 1.78 ! PT 0.86 SC 1.01 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 0.91 HN 1.26 KP 0.86 ! LA 0.84 MK 0.98 NL 0.94 OV 1.62 ! PT 0.85 SC 0.99 ! ! ! Correcting IF 4. ! A total of 33 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 0.93 HN 1.68 KP 1.00* ! LA 1.00* MK 0.97 NL 1.00* OV 1.00* ! PT 0.91 SC 1.00* ! ! ! Fit before self-cal, rms=0.419664Jy sigma=0.003148 ! Fit after self-cal, rms=0.460274Jy sigma=0.002459 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.406 mas, bmaj=9.743 mas, bpa=-1.634 degrees ! Estimated noise=2216.43 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.0267638 Jy ! Component: 100 - total flux cleaned = -0.0312809 Jy ! Component: 150 - total flux cleaned = -0.0329755 Jy ! Component: 200 - total flux cleaned = -0.0340289 Jy ! Total flux subtracted in 200 components = -0.0340289 Jy ! Clean residual min=-0.115162 max=0.102139 Jy/beam ! Clean residual mean=0.003214 rms=0.027248 Jy/beam ! Combined flux in latest and established models = 1.04637 Jy ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 42 components and 1.04637 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.457176Jy sigma=0.002449 ! Fit after self-cal, rms=0.457419Jy sigma=0.002449 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.457419Jy sigma=0.002449 ! Fit after self-cal, rms=0.734616Jy sigma=0.000710 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.419 mas, bmaj=9.587 mas, bpa=-1.662 degrees ! Estimated noise=2200.71 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00166785 Jy ! Component: 100 - total flux cleaned = -0.00334403 Jy ! Component: 150 - total flux cleaned = -0.00362549 Jy ! Component: 200 - total flux cleaned = -0.00385358 Jy ! Total flux subtracted in 200 components = -0.00385358 Jy ! Clean residual min=-0.011165 max=0.010599 Jy/beam ! Clean residual mean=-0.000104 rms=0.002592 Jy/beam ! Combined flux in latest and established models = 1.04252 Jy selfcal ! Performing phase self-cal ! Adding 5 model components to the UV plane model. ! The established model now contains 45 components and 1.04252 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.733833Jy sigma=0.000700 ! Fit after self-cal, rms=0.737341Jy sigma=0.000698 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000981037 Jy ! Component: 100 - total flux cleaned = -8.74213e-05 Jy ! Component: 150 - total flux cleaned = -0.000388851 Jy ! Component: 200 - total flux cleaned = -0.000662114 Jy ! Total flux subtracted in 200 components = -0.000662114 Jy ! Clean residual min=-0.010768 max=0.010280 Jy/beam ! Clean residual mean=-0.000103 rms=0.002525 Jy/beam ! Combined flux in latest and established models = 1.04186 Jy ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 50 components and 1.04186 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.737055Jy sigma=0.000695 ! Fit after self-cal, rms=0.737060Jy sigma=0.000694 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.737060Jy sigma=0.000694 ! Fit after self-cal, rms=0.749023Jy sigma=0.000690 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.411 mas, bmaj=9.593 mas, bpa=-1.642 degrees ! Estimated noise=2202.82 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000818918 Jy ! Component: 100 - total flux cleaned = -0.00199881 Jy ! Component: 150 - total flux cleaned = -0.00218995 Jy ! Component: 200 - total flux cleaned = -0.00235168 Jy ! Total flux subtracted in 200 components = -0.00235168 Jy ! Clean residual min=-0.009263 max=0.009622 Jy/beam ! Clean residual mean=-0.000098 rms=0.002276 Jy/beam ! Combined flux in latest and established models = 1.03951 Jy selfcal ! Performing phase self-cal ! Adding 6 model components to the UV plane model. ! The established model now contains 50 components and 1.03951 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.748616Jy sigma=0.000685 ! Fit after self-cal, rms=0.748744Jy sigma=0.000685 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000652429 Jy ! Component: 100 - total flux cleaned = -0.000140544 Jy ! Component: 150 - total flux cleaned = -0.000365356 Jy ! Component: 200 - total flux cleaned = -0.000571146 Jy ! Total flux subtracted in 200 components = -0.000571146 Jy ! Clean residual min=-0.008898 max=0.009485 Jy/beam ! Clean residual mean=-0.000100 rms=0.002242 Jy/beam ! Combined flux in latest and established models = 1.03894 Jy ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 50 components and 1.03894 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.748553Jy sigma=0.000683 ! Fit after self-cal, rms=0.748553Jy sigma=0.000683 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.748553Jy sigma=0.000683 ! Fit after self-cal, rms=0.754418Jy sigma=0.000681 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.842 mas, bmaj=18.73 mas, bpa=-3.12 degrees ! Estimated noise=2685.74 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00035294 Jy ! Component: 100 - total flux cleaned = 0.000243387 Jy ! Component: 150 - total flux cleaned = 6.23018e-05 Jy ! Component: 200 - total flux cleaned = -9.10032e-05 Jy ! Total flux subtracted in 200 components = -9.10032e-05 Jy ! Clean residual min=-0.007264 max=0.009872 Jy/beam ! Clean residual mean=-0.000179 rms=0.002326 Jy/beam ! Combined flux in latest and established models = 1.03884 Jy selfcal ! Performing phase self-cal ! Adding 7 model components to the UV plane model. ! The established model now contains 52 components and 1.03884 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.754333Jy sigma=0.000680 ! Fit after self-cal, rms=0.754462Jy sigma=0.000680 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 42). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00866128 Jy ! Component: 100 - total flux cleaned = 0.0121938 Jy ! Component: 150 - total flux cleaned = 0.0135376 Jy ! Component: 200 - total flux cleaned = 0.0139521 Jy ! Total flux subtracted in 200 components = 0.0139521 Jy ! Clean residual min=-0.006404 max=0.005922 Jy/beam ! Clean residual mean=-0.000103 rms=0.001855 Jy/beam ! Combined flux in latest and established models = 1.0528 Jy ! Performing phase self-cal ! Adding 29 model components to the UV plane model. ! The established model now contains 81 components and 1.0528 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.753935Jy sigma=0.000675 ! Fit after self-cal, rms=0.753959Jy sigma=0.000674 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.406 mas, bmaj=9.597 mas, bpa=-1.633 degrees ! Estimated noise=2204.4 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.406 x 9.597 at -1.633 degrees (North through East) ! Clean map min=-0.0073238 max=0.9537 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if ! Performing amp+phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.753959Jy sigma=0.000674 ! Fit after self-cal, rms=3.961329Jy sigma=0.000622 ! Inverting map and beam ! Estimated beam: bmin=3.407 mas, bmaj=9.598 mas, bpa=-1.589 degrees ! Estimated noise=2205.01 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000206506 Jy ! Component: 100 - total flux cleaned = 0.0013609 Jy ! Component: 150 - total flux cleaned = 0.00279961 Jy ! Component: 200 - total flux cleaned = 0.00389192 Jy ! Total flux subtracted in 200 components = 0.00389192 Jy ! Clean residual min=-0.006782 max=0.006646 Jy/beam ! Clean residual mean=-0.000058 rms=0.001631 Jy/beam ! Combined flux in latest and established models = 1.05669 Jy ! Performing phase self-cal ! Adding 27 model components to the UV plane model. ! The established model now contains 106 components and 1.05669 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=3.961294Jy sigma=0.000615 ! Fit after self-cal, rms=3.961034Jy sigma=0.000615 ! Inverting map ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000681641 Jy ! Component: 100 - total flux cleaned = 0.00163146 Jy ! Component: 150 - total flux cleaned = 0.00207733 Jy ! Component: 200 - total flux cleaned = 0.00263501 Jy ! Total flux subtracted in 200 components = 0.00263501 Jy ! Clean residual min=-0.006288 max=0.006342 Jy/beam ! Clean residual mean=-0.000052 rms=0.001536 Jy/beam ! Combined flux in latest and established models = 1.05932 Jy ! Performing phase self-cal ! Adding 36 model components to the UV plane model. ! The established model now contains 124 components and 1.05932 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=3.960997Jy sigma=0.000612 ! Fit after self-cal, rms=3.961015Jy sigma=0.000612 ! Inverting map ! Performing amp+phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=3.961015Jy sigma=0.000612 ! Fit after self-cal, rms=3.952248Jy sigma=0.000612 print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.769 mas, bmaj=8.258 mas, bpa=-0.9232 degrees ! Estimated noise=2772.58 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.738682 Jy ! Component: 100 - total flux cleaned = 0.914496 Jy ! Component: 150 - total flux cleaned = 0.980373 Jy ! Component: 200 - total flux cleaned = 1.01004 Jy ! Total flux subtracted in 200 components = 1.01004 Jy ! Clean residual min=-0.012912 max=0.016369 Jy/beam ! Clean residual mean=-0.000109 rms=0.003114 Jy/beam ! Combined flux in latest and established models = 1.01004 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 16 model components to the UV plane model. ! The established model now contains 16 components and 1.01004 Jy ! Inverting map and beam ! Estimated beam: bmin=3.406 mas, bmaj=9.597 mas, bpa=-1.569 degrees ! Estimated noise=2204.19 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-3, 6). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0182287 Jy ! Component: 100 - total flux cleaned = 0.0292372 Jy ! Component: 150 - total flux cleaned = 0.0356703 Jy ! Component: 200 - total flux cleaned = 0.0398365 Jy ! Total flux subtracted in 200 components = 0.0398365 Jy ! Clean residual min=-0.007634 max=0.007146 Jy/beam ! Clean residual mean=-0.000084 rms=0.001841 Jy/beam ! Combined flux in latest and established models = 1.04988 Jy ! Adding 50 model components to the UV plane model. ! The established model now contains 62 components and 1.04988 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.835 mas, bmaj=18.72 mas, bpa=-3.019 degrees ! Estimated noise=2686.75 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00491042 Jy ! Component: 100 - total flux cleaned = 0.00770536 Jy ! Component: 150 - total flux cleaned = 0.00974141 Jy ! Component: 200 - total flux cleaned = 0.0104982 Jy ! Total flux subtracted in 200 components = 0.0104982 Jy ! Clean residual min=-0.005342 max=0.005600 Jy/beam ! Clean residual mean=-0.000108 rms=0.001701 Jy/beam ! Combined flux in latest and established models = 1.06037 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000301339 Jy ! Component: 100 - total flux cleaned = 0.000572413 Jy ! Component: 150 - total flux cleaned = 0.000658857 Jy ! Component: 200 - total flux cleaned = 0.000662561 Jy ! Total flux subtracted in 200 components = 0.000662561 Jy ! Clean residual min=-0.005194 max=0.005269 Jy/beam ! Clean residual mean=-0.000104 rms=0.001665 Jy/beam ! Combined flux in latest and established models = 1.06104 Jy ! Adding 50 model components to the UV plane model. ! The established model now contains 105 components and 1.06104 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.406 mas, bmaj=9.597 mas, bpa=-1.569 degrees ! Estimated noise=2204.19 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00168364 Jy ! Component: 100 - total flux cleaned = -0.00187002 Jy ! Component: 150 - total flux cleaned = -0.00186217 Jy ! Component: 200 - total flux cleaned = -0.00185713 Jy ! Total flux subtracted in 200 components = -0.00185713 Jy ! Clean residual min=-0.006104 max=0.006370 Jy/beam ! Clean residual mean=-0.000061 rms=0.001542 Jy/beam ! Combined flux in latest and established models = 1.05918 Jy selfcal ! Performing phase self-cal ! Adding 29 model components to the UV plane model. ! The established model now contains 132 components and 1.05918 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=3.952149Jy sigma=0.000612 ! Fit after self-cal, rms=3.951641Jy sigma=0.000612 wmodel J1625-2527_S_2017_06_10_pus_map.mod ! Writing 132 model components to file: J1625-2527_S_2017_06_10_pus_map.mod wobs J1625-2527_S_2017_06_10_pus_uvs.fits ! Writing UV FITS file: J1625-2527_S_2017_06_10_pus_uvs.fits wwins J1625-2527_S_2017_06_10_pus_map.win ! wwins: Wrote 3 windows to J1625-2527_S_2017_06_10_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.000757556 Jy ! Component: 100 - total flux cleaned = -0.0013732 Jy ! Component: 150 - total flux cleaned = -0.0017624 Jy ! Component: 200 - total flux cleaned = -0.00213368 Jy ! Component: 250 - total flux cleaned = -0.00231192 Jy ! Component: 300 - total flux cleaned = -0.00248388 Jy ! Component: 350 - total flux cleaned = -0.00248397 Jy ! Component: 400 - total flux cleaned = -0.00232633 Jy ! Component: 450 - total flux cleaned = -0.00240232 Jy ! Component: 500 - total flux cleaned = -0.00269721 Jy ! Component: 550 - total flux cleaned = -0.00276857 Jy ! Component: 600 - total flux cleaned = -0.00304795 Jy ! Component: 650 - total flux cleaned = -0.00311621 Jy ! Component: 700 - total flux cleaned = -0.00324947 Jy ! Component: 750 - total flux cleaned = -0.00351262 Jy ! Component: 800 - total flux cleaned = -0.00370583 Jy ! Component: 850 - total flux cleaned = -0.00408548 Jy ! Component: 900 - total flux cleaned = -0.0041474 Jy ! Component: 950 - total flux cleaned = -0.00427103 Jy ! Component: 1000 - total flux cleaned = -0.00433167 Jy ! Component: 1050 - total flux cleaned = -0.0044511 Jy ! Component: 1100 - total flux cleaned = -0.00451017 Jy ! Component: 1150 - total flux cleaned = -0.0045682 Jy ! Component: 1200 - total flux cleaned = -0.00451138 Jy ! Component: 1250 - total flux cleaned = -0.00445535 Jy ! Component: 1300 - total flux cleaned = -0.00445652 Jy ! Component: 1350 - total flux cleaned = -0.0045121 Jy ! Component: 1400 - total flux cleaned = -0.00445815 Jy ! Component: 1450 - total flux cleaned = -0.00440483 Jy ! Component: 1500 - total flux cleaned = -0.0044585 Jy ! Component: 1550 - total flux cleaned = -0.00430132 Jy ! Component: 1600 - total flux cleaned = -0.00414629 Jy ! Component: 1650 - total flux cleaned = -0.00419773 Jy ! Component: 1700 - total flux cleaned = -0.0042473 Jy ! Component: 1750 - total flux cleaned = -0.0041466 Jy ! Component: 1800 - total flux cleaned = -0.00414656 Jy ! Component: 1850 - total flux cleaned = -0.00419555 Jy ! Component: 1900 - total flux cleaned = -0.00414598 Jy ! Component: 1950 - total flux cleaned = -0.00414514 Jy ! Component: 2000 - total flux cleaned = -0.0040972 Jy ! Component: 2050 - total flux cleaned = -0.00424091 Jy ! Component: 2100 - total flux cleaned = -0.0043358 Jy ! Component: 2150 - total flux cleaned = -0.00438327 Jy ! Component: 2200 - total flux cleaned = -0.0043369 Jy ! Component: 2250 - total flux cleaned = -0.00442903 Jy ! Component: 2300 - total flux cleaned = -0.00461256 Jy ! Component: 2350 - total flux cleaned = -0.00461245 Jy ! Component: 2400 - total flux cleaned = -0.00474803 Jy ! Component: 2450 - total flux cleaned = -0.00488294 Jy ! Component: 2500 - total flux cleaned = -0.00497231 Jy ! Component: 2550 - total flux cleaned = -0.00519434 Jy ! Component: 2600 - total flux cleaned = -0.0053708 Jy ! Component: 2650 - total flux cleaned = -0.00545825 Jy ! Component: 2700 - total flux cleaned = -0.00567639 Jy ! Component: 2750 - total flux cleaned = -0.00576299 Jy ! Component: 2800 - total flux cleaned = -0.00589254 Jy ! Component: 2850 - total flux cleaned = -0.00597846 Jy ! Component: 2900 - total flux cleaned = -0.00610663 Jy ! Component: 2950 - total flux cleaned = -0.00623406 Jy ! Component: 3000 - total flux cleaned = -0.00636118 Jy ! Component: 3050 - total flux cleaned = -0.0065717 Jy ! Component: 3100 - total flux cleaned = -0.00661372 Jy ! Component: 3150 - total flux cleaned = -0.0068221 Jy ! Component: 3200 - total flux cleaned = -0.00682226 Jy ! Component: 3250 - total flux cleaned = -0.00702871 Jy ! Component: 3300 - total flux cleaned = -0.00711064 Jy ! Component: 3350 - total flux cleaned = -0.00723337 Jy ! Component: 3400 - total flux cleaned = -0.00727434 Jy ! Component: 3450 - total flux cleaned = -0.00739616 Jy ! Component: 3500 - total flux cleaned = -0.00755777 Jy ! Component: 3550 - total flux cleaned = -0.00767836 Jy ! Component: 3600 - total flux cleaned = -0.00771867 Jy ! Component: 3650 - total flux cleaned = -0.00795825 Jy ! Component: 3700 - total flux cleaned = -0.00799811 Jy ! Component: 3750 - total flux cleaned = -0.00823574 Jy ! Component: 3800 - total flux cleaned = -0.00831482 Jy ! Component: 3850 - total flux cleaned = -0.00851121 Jy ! Component: 3900 - total flux cleaned = -0.00866787 Jy ! Component: 3950 - total flux cleaned = -0.00878468 Jy ! Component: 4000 - total flux cleaned = -0.00882376 Jy ! Component: 4050 - total flux cleaned = -0.00897865 Jy ! Total flux subtracted in 4096 components = -0.00917172 Jy ! Clean residual min=-0.002138 max=0.002220 Jy/beam ! Clean residual mean=-0.000022 rms=0.000714 Jy/beam ! Combined flux in latest and established models = 1.05001 Jy keep ! Adding 258 model components to the UV plane model. ! The established model now contains 390 components and 1.05001 Jy ![Exited script file: muppet] wmap "J1625-2527_S_2017_06_10_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.406 x 9.597 at -1.569 degrees (North through East) ! Clean map min=-0.0051794 max=0.95475 Jy/beam ! Writing clean map to FITS file: J1625-2527_S_2017_06_10_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.95475 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000707984 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.222462 0.222462 0.444923 0.889846 1.77969 3.55939 7.11877 14.2375 28.4751 56.9502 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0021 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.954 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.406 x 9.597 at -1.569 degrees (North through East) ! Clean map min=-0.0051794 max=0.95475 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J1625-2527_S_2017_06_10_pus_uvs.log closed on Mon May 6 14:57:54 2019