! Started logfile: J1625-2527_S_2017_05_27_pus_uvs.log on Fri May 3 11:10:34 2019 obs J1625-2527_S_2017_05_27_pus_uva.fits ! Reading UV FITS file: J1625-2527_S_2017_05_27_pus_uva.fits ! AN table 1: 16 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.316667 visibilities/baseline/integration-bin. ! *** This seems a bit low - see "help observe" on the binwid argument. ! Found source: J1625-2527 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 1211 lines of history. ! ! Reading 912 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J1625-2527_S_2017_05_27_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 67 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 67 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 67 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 100 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.474690Jy sigma=0.003349 ! Fit after self-cal, rms=0.405694Jy sigma=0.002797 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.959 mas, bmaj=29.39 mas, bpa=-25.9 degrees ! Estimated noise=4507.23 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.945241 Jy ! Component: 100 - total flux cleaned = 1.1929 Jy ! Total flux subtracted in 100 components = 1.1929 Jy ! Clean residual min=-0.067844 max=0.106983 Jy/beam ! Clean residual mean=-0.000507 rms=0.027127 Jy/beam ! Combined flux in latest and established models = 1.1929 Jy ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 12 components and 1.1929 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.282519Jy sigma=0.001756 ! Fit after self-cal, rms=0.282534Jy sigma=0.001756 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.641 mas, bmaj=27.96 mas, bpa=-25.53 degrees ! Estimated noise=3384.07 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.148372 Jy ! Component: 100 - total flux cleaned = 0.20531 Jy ! Component: 150 - total flux cleaned = 0.234245 Jy ! Component: 200 - total flux cleaned = 0.254134 Jy ! Total flux subtracted in 200 components = 0.254134 Jy ! Clean residual min=-0.047392 max=0.029284 Jy/beam ! Clean residual mean=-0.000420 rms=0.013796 Jy/beam ! Combined flux in latest and established models = 1.44703 Jy ! Performing phase self-cal ! Adding 78 model components to the UV plane model. ! The established model now contains 90 components and 1.44703 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.191945Jy sigma=0.001063 ! Fit after self-cal, rms=0.191971Jy sigma=0.001063 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 0.98 HN 1.00* KP 1.01 ! LA 0.99 MK 1.00 NL 1.00* OV 1.00 ! PT 1.06 SC 1.00* ! ! ! Correcting IF 2. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.02 HN 1.00* KP 0.97 ! LA 0.94 MK 1.01 NL 1.00* OV 1.03 ! PT 1.02 SC 1.00* ! ! ! Correcting IF 3. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.06 HN 1.00* KP 1.00 ! LA 0.96 MK 1.04 NL 1.00* OV 0.93 ! PT 1.01 SC 1.00* ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.08 HN 1.00* KP 1.00* ! LA 0.64 MK 0.98 NL 1.00* OV 1.00* ! PT 1.05 SC 1.00* ! ! ! Fit before self-cal, rms=0.191971Jy sigma=0.001063 ! Fit after self-cal, rms=0.097039Jy sigma=0.000702 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.632 mas, bmaj=27.89 mas, bpa=-25.57 degrees ! Estimated noise=3379.91 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00596112 Jy ! Component: 100 - total flux cleaned = 0.00734252 Jy ! Component: 150 - total flux cleaned = 0.00878813 Jy ! Component: 200 - total flux cleaned = 0.00980941 Jy ! Total flux subtracted in 200 components = 0.00980941 Jy ! Clean residual min=-0.008670 max=0.010041 Jy/beam ! Clean residual mean=-0.000099 rms=0.002917 Jy/beam ! Combined flux in latest and established models = 1.45684 Jy ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 101 components and 1.45684 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.095577Jy sigma=0.000694 ! Fit after self-cal, rms=0.095382Jy sigma=0.000693 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.095382Jy sigma=0.000693 ! Fit after self-cal, rms=0.095364Jy sigma=0.000693 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.631 mas, bmaj=27.88 mas, bpa=-25.57 degrees ! Estimated noise=3380.79 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00297993 Jy ! Component: 100 - total flux cleaned = 0.00406101 Jy ! Component: 150 - total flux cleaned = 0.00468676 Jy ! Component: 200 - total flux cleaned = 0.00537083 Jy ! Total flux subtracted in 200 components = 0.00537083 Jy ! Clean residual min=-0.007306 max=0.008426 Jy/beam ! Clean residual mean=-0.000072 rms=0.002489 Jy/beam ! Combined flux in latest and established models = 1.46221 Jy selfcal ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 105 components and 1.46221 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.094716Jy sigma=0.000689 ! Fit after self-cal, rms=0.094713Jy sigma=0.000689 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000895826 Jy ! Component: 100 - total flux cleaned = 0.00152035 Jy ! Component: 150 - total flux cleaned = 0.00198634 Jy ! Component: 200 - total flux cleaned = 0.00249052 Jy ! Total flux subtracted in 200 components = 0.00249052 Jy ! Clean residual min=-0.006923 max=0.007897 Jy/beam ! Clean residual mean=-0.000074 rms=0.002357 Jy/beam ! Combined flux in latest and established models = 1.4647 Jy ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 114 components and 1.4647 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.094493Jy sigma=0.000688 ! Fit after self-cal, rms=0.094493Jy sigma=0.000688 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.094493Jy sigma=0.000688 ! Fit after self-cal, rms=0.094450Jy sigma=0.000687 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.631 mas, bmaj=27.88 mas, bpa=-25.57 degrees ! Estimated noise=3381.59 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00145972 Jy ! Component: 100 - total flux cleaned = 0.00173465 Jy ! Component: 150 - total flux cleaned = 0.00224117 Jy ! Component: 200 - total flux cleaned = 0.00261878 Jy ! Total flux subtracted in 200 components = 0.00261878 Jy ! Clean residual min=-0.006589 max=0.007586 Jy/beam ! Clean residual mean=-0.000044 rms=0.002174 Jy/beam ! Combined flux in latest and established models = 1.46732 Jy selfcal ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 120 components and 1.46732 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.094257Jy sigma=0.000687 ! Fit after self-cal, rms=0.094254Jy sigma=0.000687 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 9.18885e-05 Jy ! Component: 100 - total flux cleaned = 0.00022636 Jy ! Component: 150 - total flux cleaned = 0.000468906 Jy ! Component: 200 - total flux cleaned = 0.000525215 Jy ! Total flux subtracted in 200 components = 0.000525215 Jy ! Clean residual min=-0.006539 max=0.007418 Jy/beam ! Clean residual mean=-0.000045 rms=0.002114 Jy/beam ! Combined flux in latest and established models = 1.46785 Jy ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 128 components and 1.46785 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.094169Jy sigma=0.000686 ! Fit after self-cal, rms=0.094168Jy sigma=0.000686 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.094168Jy sigma=0.000686 ! Fit after self-cal, rms=0.094196Jy sigma=0.000686 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=12.1 mas, bmaj=32.53 mas, bpa=-8.814 degrees ! Estimated noise=3924.49 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00133571 Jy ! Component: 100 - total flux cleaned = 0.00169602 Jy ! Component: 150 - total flux cleaned = 0.00191678 Jy ! Component: 200 - total flux cleaned = 0.00208963 Jy ! Total flux subtracted in 200 components = 0.00208963 Jy ! Clean residual min=-0.007238 max=0.007128 Jy/beam ! Clean residual mean=-0.000044 rms=0.002362 Jy/beam ! Combined flux in latest and established models = 1.46994 Jy selfcal ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 146 components and 1.46994 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.094182Jy sigma=0.000686 ! Fit after self-cal, rms=0.094180Jy sigma=0.000686 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00020122 Jy ! Component: 100 - total flux cleaned = 0.000390234 Jy ! Component: 150 - total flux cleaned = 0.000571746 Jy ! Component: 200 - total flux cleaned = 0.000744708 Jy ! Total flux subtracted in 200 components = 0.000744708 Jy ! Clean residual min=-0.007295 max=0.007102 Jy/beam ! Clean residual mean=-0.000044 rms=0.002336 Jy/beam ! Combined flux in latest and established models = 1.47068 Jy ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 158 components and 1.47068 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.094158Jy sigma=0.000685 ! Fit after self-cal, rms=0.094159Jy sigma=0.000685 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.631 mas, bmaj=27.88 mas, bpa=-25.57 degrees ! Estimated noise=3382.9 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.631 x 27.88 at -25.57 degrees (North through East) ! Clean map min=-0.0077551 max=1.2054 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if ! Performing amp+phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.094159Jy sigma=0.000685 ! Fit after self-cal, rms=0.075442Jy sigma=0.000545 ! Inverting map and beam ! Estimated beam: bmin=3.632 mas, bmaj=27.87 mas, bpa=-25.57 degrees ! Estimated noise=3383.17 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00117912 Jy ! Component: 100 - total flux cleaned = 0.00124352 Jy ! Component: 150 - total flux cleaned = 0.00118272 Jy ! Component: 200 - total flux cleaned = 0.0011288 Jy ! Total flux subtracted in 200 components = 0.0011288 Jy ! Clean residual min=-0.006443 max=0.006859 Jy/beam ! Clean residual mean=-0.000027 rms=0.001975 Jy/beam ! Combined flux in latest and established models = 1.47181 Jy ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 167 components and 1.47181 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.075322Jy sigma=0.000545 ! Fit after self-cal, rms=0.075322Jy sigma=0.000545 ! Inverting map ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -4.95367e-05 Jy ! Component: 100 - total flux cleaned = -9.9018e-05 Jy ! Component: 150 - total flux cleaned = -0.000193751 Jy ! Component: 200 - total flux cleaned = -0.000193487 Jy ! Total flux subtracted in 200 components = -0.000193487 Jy ! Clean residual min=-0.006357 max=0.006766 Jy/beam ! Clean residual mean=-0.000026 rms=0.001941 Jy/beam ! Combined flux in latest and established models = 1.47162 Jy ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 174 components and 1.47162 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.075255Jy sigma=0.000545 ! Fit after self-cal, rms=0.075255Jy sigma=0.000545 ! Inverting map ! Performing amp+phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.075255Jy sigma=0.000545 ! Fit after self-cal, rms=0.075278Jy sigma=0.000545 print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.935 mas, bmaj=29.57 mas, bpa=-25.98 degrees ! Estimated noise=4473.22 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.936825 Jy ! Component: 100 - total flux cleaned = 1.1866 Jy ! Component: 150 - total flux cleaned = 1.30042 Jy ! Component: 200 - total flux cleaned = 1.35353 Jy ! Total flux subtracted in 200 components = 1.35353 Jy ! Clean residual min=-0.017628 max=0.023646 Jy/beam ! Clean residual mean=0.000005 rms=0.006432 Jy/beam ! Combined flux in latest and established models = 1.35353 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 16 model components to the UV plane model. ! The established model now contains 16 components and 1.35353 Jy ! Inverting map and beam ! Estimated beam: bmin=3.632 mas, bmaj=27.88 mas, bpa=-25.57 degrees ! Estimated noise=3384.24 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0349186 Jy ! Component: 100 - total flux cleaned = 0.0536066 Jy ! Component: 150 - total flux cleaned = 0.0660681 Jy ! Component: 200 - total flux cleaned = 0.0752485 Jy ! Total flux subtracted in 200 components = 0.0752485 Jy ! Clean residual min=-0.008248 max=0.007748 Jy/beam ! Clean residual mean=-0.000016 rms=0.003280 Jy/beam ! Combined flux in latest and established models = 1.42877 Jy ! Adding 116 model components to the UV plane model. ! The established model now contains 126 components and 1.42877 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=12.11 mas, bmaj=32.54 mas, bpa=-8.8 degrees ! Estimated noise=3925.12 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00971628 Jy ! Component: 100 - total flux cleaned = 0.0164681 Jy ! Component: 150 - total flux cleaned = 0.0215642 Jy ! Component: 200 - total flux cleaned = 0.0255698 Jy ! Total flux subtracted in 200 components = 0.0255698 Jy ! Clean residual min=-0.007983 max=0.005376 Jy/beam ! Clean residual mean=-0.000023 rms=0.002874 Jy/beam ! Combined flux in latest and established models = 1.45434 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00318681 Jy ! Component: 100 - total flux cleaned = 0.00574061 Jy ! Component: 150 - total flux cleaned = 0.00779238 Jy ! Component: 200 - total flux cleaned = 0.00944787 Jy ! Total flux subtracted in 200 components = 0.00944787 Jy ! Clean residual min=-0.007377 max=0.005641 Jy/beam ! Clean residual mean=-0.000023 rms=0.002540 Jy/beam ! Combined flux in latest and established models = 1.46379 Jy ! Adding 98 model components to the UV plane model. ! The established model now contains 218 components and 1.46379 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.632 mas, bmaj=27.88 mas, bpa=-25.57 degrees ! Estimated noise=3384.24 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000351286 Jy ! Component: 100 - total flux cleaned = 0.000938318 Jy ! Component: 150 - total flux cleaned = 0.001608 Jy ! Component: 200 - total flux cleaned = 0.00227985 Jy ! Total flux subtracted in 200 components = 0.00227985 Jy ! Clean residual min=-0.006756 max=0.005625 Jy/beam ! Clean residual mean=-0.000018 rms=0.002035 Jy/beam ! Combined flux in latest and established models = 1.46607 Jy selfcal ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 233 components and 1.46607 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.075322Jy sigma=0.000545 ! Fit after self-cal, rms=0.075307Jy sigma=0.000545 wmodel J1625-2527_S_2017_05_27_pus_map.mod ! Writing 233 model components to file: J1625-2527_S_2017_05_27_pus_map.mod wobs J1625-2527_S_2017_05_27_pus_uvs.fits ! Writing UV FITS file: J1625-2527_S_2017_05_27_pus_uvs.fits wwins J1625-2527_S_2017_05_27_pus_map.win ! wwins: Wrote 1 windows to J1625-2527_S_2017_05_27_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.00298257 Jy ! Component: 100 - total flux cleaned = -0.00447044 Jy ! Component: 150 - total flux cleaned = -0.0053336 Jy ! Component: 200 - total flux cleaned = -0.0054113 Jy ! Component: 250 - total flux cleaned = -0.00575348 Jy ! Component: 300 - total flux cleaned = -0.0059467 Jy ! Component: 350 - total flux cleaned = -0.00606902 Jy ! Component: 400 - total flux cleaned = -0.00618422 Jy ! Component: 450 - total flux cleaned = -0.00624037 Jy ! Component: 500 - total flux cleaned = -0.00629068 Jy ! Component: 550 - total flux cleaned = -0.00624516 Jy ! Component: 600 - total flux cleaned = -0.00646971 Jy ! Component: 650 - total flux cleaned = -0.00672456 Jy ! Component: 700 - total flux cleaned = -0.00692647 Jy ! Component: 750 - total flux cleaned = -0.00715841 Jy ! Component: 800 - total flux cleaned = -0.00745541 Jy ! Component: 850 - total flux cleaned = -0.00767019 Jy ! Component: 900 - total flux cleaned = -0.00798296 Jy ! Component: 950 - total flux cleaned = -0.00815277 Jy ! Component: 1000 - total flux cleaned = -0.00841856 Jy ! Component: 1050 - total flux cleaned = -0.00864586 Jy ! Component: 1100 - total flux cleaned = -0.00883667 Jy ! Component: 1150 - total flux cleaned = -0.00911769 Jy ! Component: 1200 - total flux cleaned = -0.00924064 Jy ! Component: 1250 - total flux cleaned = -0.00942208 Jy ! Component: 1300 - total flux cleaned = -0.00963002 Jy ! Component: 1350 - total flux cleaned = -0.00971784 Jy ! Component: 1400 - total flux cleaned = -0.00983408 Jy ! Component: 1450 - total flux cleaned = -0.0100063 Jy ! Component: 1500 - total flux cleaned = -0.0101202 Jy ! Component: 1550 - total flux cleaned = -0.0101768 Jy ! Component: 1600 - total flux cleaned = -0.0102608 Jy ! Component: 1650 - total flux cleaned = -0.0102884 Jy ! Component: 1700 - total flux cleaned = -0.0103994 Jy ! Component: 1750 - total flux cleaned = -0.0103439 Jy ! Component: 1800 - total flux cleaned = -0.0103163 Jy ! Component: 1850 - total flux cleaned = -0.0103162 Jy ! Component: 1900 - total flux cleaned = -0.0102612 Jy ! Component: 1950 - total flux cleaned = -0.010206 Jy ! Component: 2000 - total flux cleaned = -0.0100952 Jy ! Component: 2050 - total flux cleaned = -0.0100117 Jy ! Component: 2100 - total flux cleaned = -0.00992768 Jy ! Component: 2150 - total flux cleaned = -0.00987192 Jy ! Component: 2200 - total flux cleaned = -0.00984384 Jy ! Component: 2250 - total flux cleaned = -0.00981535 Jy ! Component: 2300 - total flux cleaned = -0.00978687 Jy ! Component: 2350 - total flux cleaned = -0.00975815 Jy ! Component: 2400 - total flux cleaned = -0.00972859 Jy ! Component: 2450 - total flux cleaned = -0.00975785 Jy ! Component: 2500 - total flux cleaned = -0.00972791 Jy ! Component: 2550 - total flux cleaned = -0.00969767 Jy ! Component: 2600 - total flux cleaned = -0.00969754 Jy ! Component: 2650 - total flux cleaned = -0.0096976 Jy ! Component: 2700 - total flux cleaned = -0.00963547 Jy ! Component: 2750 - total flux cleaned = -0.00963579 Jy ! Component: 2800 - total flux cleaned = -0.00954034 Jy ! Component: 2850 - total flux cleaned = -0.00947613 Jy ! Component: 2900 - total flux cleaned = -0.009411 Jy ! Component: 2950 - total flux cleaned = -0.00937797 Jy ! Component: 3000 - total flux cleaned = -0.00934417 Jy ! Component: 3050 - total flux cleaned = -0.00927574 Jy ! Component: 3100 - total flux cleaned = -0.00920676 Jy ! Component: 3150 - total flux cleaned = -0.00913627 Jy ! Component: 3200 - total flux cleaned = -0.00906452 Jy ! Component: 3250 - total flux cleaned = -0.00895562 Jy ! Component: 3300 - total flux cleaned = -0.00888145 Jy ! Component: 3350 - total flux cleaned = -0.00880635 Jy ! Component: 3400 - total flux cleaned = -0.00865355 Jy ! Component: 3450 - total flux cleaned = -0.00849848 Jy ! Component: 3500 - total flux cleaned = -0.00838034 Jy ! Component: 3550 - total flux cleaned = -0.00822039 Jy ! Component: 3600 - total flux cleaned = -0.00809833 Jy ! Component: 3650 - total flux cleaned = -0.00793287 Jy ! Component: 3700 - total flux cleaned = -0.00776516 Jy ! Component: 3750 - total flux cleaned = -0.00755074 Jy ! Component: 3800 - total flux cleaned = -0.00741971 Jy ! Component: 3850 - total flux cleaned = -0.00724193 Jy ! Component: 3900 - total flux cleaned = -0.00710617 Jy ! Component: 3950 - total flux cleaned = -0.00687719 Jy ! Component: 4000 - total flux cleaned = -0.00673759 Jy ! Component: 4050 - total flux cleaned = -0.00654745 Jy ! Total flux subtracted in 4096 components = -0.00640264 Jy ! Clean residual min=-0.002525 max=0.002816 Jy/beam ! Clean residual mean=0.000009 rms=0.000902 Jy/beam ! Combined flux in latest and established models = 1.45967 Jy keep ! Adding 285 model components to the UV plane model. ! The established model now contains 518 components and 1.45967 Jy ![Exited script file: muppet] wmap "J1625-2527_S_2017_05_27_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.632 x 27.88 at -25.57 degrees (North through East) ! Clean map min=-0.0073872 max=1.2453 Jy/beam ! Writing clean map to FITS file: J1625-2527_S_2017_05_27_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 1.24534 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000987137 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.237799 0.237799 0.475598 0.951196 1.90239 3.80478 7.60957 15.2191 30.4383 60.8766 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0029 print "peak=",int(1000*peak_flux)/1000 ! peak= 1.245 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.632 x 27.88 at -25.57 degrees (North through East) ! Clean map min=-0.0073872 max=1.2453 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J1625-2527_S_2017_05_27_pus_uvs.log closed on Fri May 3 11:10:38 2019