! Started logfile: J1625-2527_S_2017_02_24_pus_uvs.log on Sat May 4 11:30:36 2019 obs J1625-2527_S_2017_02_24_pus_uva.fits ! Reading UV FITS file: J1625-2527_S_2017_02_24_pus_uva.fits ! AN table 1: 16 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.775 visibilities/baseline/integration-bin. ! Found source: J1625-2527 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 823 lines of history. ! ! Reading 2232 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J1625-2527_S_2017_02_24_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 20 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 20 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 20 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 70 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.547826Jy sigma=0.045994 ! Fit after self-cal, rms=0.528911Jy sigma=0.044572 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.674 mas, bmaj=7.58 mas, bpa=-17.18 degrees ! Estimated noise=1792.35 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.569809 Jy ! Component: 100 - total flux cleaned = 0.749559 Jy ! Total flux subtracted in 100 components = 0.749559 Jy ! Clean residual min=-0.244879 max=0.292307 Jy/beam ! Clean residual mean=-0.001203 rms=0.095003 Jy/beam ! Combined flux in latest and established models = 0.749559 Jy ! Performing phase self-cal ! Adding 8 model components to the UV plane model. ! The established model now contains 8 components and 0.749559 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.756441Jy sigma=0.031431 ! Fit after self-cal, rms=0.756415Jy sigma=0.031431 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.538 mas, bmaj=8.845 mas, bpa=-15.12 degrees ! Estimated noise=1294.46 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.0749236 Jy ! Component: 100 - total flux cleaned = -0.0878119 Jy ! Component: 150 - total flux cleaned = -0.0960204 Jy ! Component: 200 - total flux cleaned = -0.10082 Jy ! Total flux subtracted in 200 components = -0.10082 Jy ! Clean residual min=-0.249121 max=0.287208 Jy/beam ! Clean residual mean=-0.002584 rms=0.088873 Jy/beam ! Combined flux in latest and established models = 0.648739 Jy ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 22 components and 0.648739 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.747375Jy sigma=0.028753 ! Fit after self-cal, rms=0.747298Jy sigma=0.028753 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.65 FD 0.69 HN 0.96 KP 0.64 ! LA 0.63 MK 0.86 NL 0.69 OV 0.73 ! PT 0.67 SC 1.09 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 0.69 FD 0.64 HN 1.00 KP 0.62 ! LA 0.61 MK 0.85 NL 0.68 OV 0.75 ! PT 0.65 SC 1.18 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 0.74 FD 0.67 HN 0.97 KP 0.68 ! LA 0.66 MK 0.88 NL 0.74 OV 0.68 ! PT 0.65 SC 1.18 ! ! ! Correcting IF 4. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.74 FD 0.72 HN 0.99 KP 1.00* ! LA 40.01 MK 0.92 NL 1.00* OV 0.70 ! PT 0.69 SC 1.00* ! ! ! Fit before self-cal, rms=0.747298Jy sigma=0.028753 ! Fit after self-cal, rms=14.078451Jy sigma=0.001637 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.489 mas, bmaj=8.797 mas, bpa=-9.568 degrees ! Estimated noise=1315.78 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0320963 Jy ! Component: 100 - total flux cleaned = 0.034982 Jy ! Component: 150 - total flux cleaned = 0.0355691 Jy ! Component: 200 - total flux cleaned = 0.0360784 Jy ! Total flux subtracted in 200 components = 0.0360784 Jy ! Clean residual min=-0.018790 max=0.023919 Jy/beam ! Clean residual mean=-0.000059 rms=0.005301 Jy/beam ! Combined flux in latest and established models = 0.684817 Jy ! Performing phase self-cal ! Adding 7 model components to the UV plane model. ! The established model now contains 25 components and 0.684817 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=14.076825Jy sigma=0.001564 ! Fit after self-cal, rms=14.076850Jy sigma=0.001558 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=14.076850Jy sigma=0.001558 ! Fit after self-cal, rms=15.166080Jy sigma=0.001468 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.437 mas, bmaj=8.663 mas, bpa=-9.584 degrees ! Estimated noise=1337.99 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0233411 Jy ! Component: 100 - total flux cleaned = 0.0322459 Jy ! Component: 150 - total flux cleaned = 0.0336547 Jy ! Component: 200 - total flux cleaned = 0.0339663 Jy ! Total flux subtracted in 200 components = 0.0339663 Jy ! Clean residual min=-0.017501 max=0.018969 Jy/beam ! Clean residual mean=-0.000057 rms=0.004834 Jy/beam ! Combined flux in latest and established models = 0.718784 Jy selfcal ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 36 components and 0.718783 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=15.163475Jy sigma=0.001455 ! Fit after self-cal, rms=15.163483Jy sigma=0.001455 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000279181 Jy ! Component: 100 - total flux cleaned = 0.000554283 Jy ! Component: 150 - total flux cleaned = 0.000555723 Jy ! Component: 200 - total flux cleaned = 0.000561556 Jy ! Total flux subtracted in 200 components = 0.000561556 Jy ! Clean residual min=-0.017494 max=0.018946 Jy/beam ! Clean residual mean=-0.000059 rms=0.004798 Jy/beam ! Combined flux in latest and established models = 0.719345 Jy ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 46 components and 0.719345 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=15.163487Jy sigma=0.001448 ! Fit after self-cal, rms=15.163488Jy sigma=0.001448 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=15.163488Jy sigma=0.001448 ! Fit after self-cal, rms=0.087207Jy sigma=0.000816 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.405 mas, bmaj=8.623 mas, bpa=-9.6 degrees ! Estimated noise=1334.56 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00941886 Jy ! Component: 100 - total flux cleaned = 0.00912983 Jy ! Component: 150 - total flux cleaned = 0.00913297 Jy ! Component: 200 - total flux cleaned = 0.00864509 Jy ! Total flux subtracted in 200 components = 0.00864509 Jy ! Clean residual min=-0.007285 max=0.011681 Jy/beam ! Clean residual mean=-0.000000 rms=0.002264 Jy/beam ! Combined flux in latest and established models = 0.72799 Jy selfcal ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 55 components and 0.72799 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.084187Jy sigma=0.000790 ! Fit after self-cal, rms=0.084103Jy sigma=0.000790 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-35, 62.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00574447 Jy ! Component: 100 - total flux cleaned = 0.00675044 Jy ! Component: 150 - total flux cleaned = 0.00651696 Jy ! Component: 200 - total flux cleaned = 0.00652168 Jy ! Total flux subtracted in 200 components = 0.00652168 Jy ! Clean residual min=-0.007400 max=0.008277 Jy/beam ! Clean residual mean=0.000003 rms=0.001983 Jy/beam ! Combined flux in latest and established models = 0.734512 Jy ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 69 components and 0.734512 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.081160Jy sigma=0.000763 ! Fit after self-cal, rms=0.081108Jy sigma=0.000763 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.081108Jy sigma=0.000763 ! Fit after self-cal, rms=0.077227Jy sigma=0.000754 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.367 mas, bmaj=19.57 mas, bpa=-2.475 degrees ! Estimated noise=1508.87 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00440735 Jy ! Component: 100 - total flux cleaned = 0.00497033 Jy ! Component: 150 - total flux cleaned = 0.00533983 Jy ! Component: 200 - total flux cleaned = 0.00566355 Jy ! Total flux subtracted in 200 components = 0.00566355 Jy ! Clean residual min=-0.006724 max=0.006824 Jy/beam ! Clean residual mean=0.000002 rms=0.001911 Jy/beam ! Combined flux in latest and established models = 0.740175 Jy selfcal ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 85 components and 0.740175 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.076191Jy sigma=0.000746 ! Fit after self-cal, rms=0.076180Jy sigma=0.000746 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000155326 Jy ! Component: 100 - total flux cleaned = -5.65882e-05 Jy ! Component: 150 - total flux cleaned = 4.36542e-05 Jy ! Component: 200 - total flux cleaned = 0.000138716 Jy ! Total flux subtracted in 200 components = 0.000138716 Jy ! Clean residual min=-0.006634 max=0.006705 Jy/beam ! Clean residual mean=0.000001 rms=0.001877 Jy/beam ! Combined flux in latest and established models = 0.740314 Jy ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 88 components and 0.740314 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.075705Jy sigma=0.000743 ! Fit after self-cal, rms=0.075709Jy sigma=0.000743 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.38 mas, bmaj=8.573 mas, bpa=-9.565 degrees ! Estimated noise=1330.15 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.38 x 8.573 at -9.565 degrees (North through East) ! Clean map min=-0.012062 max=0.74555 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if ! Performing amp+phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.075709Jy sigma=0.000743 ! Fit after self-cal, rms=0.071252Jy sigma=0.000696 ! Inverting map and beam ! Estimated beam: bmin=3.366 mas, bmaj=8.543 mas, bpa=-9.63 degrees ! Estimated noise=1329.61 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00496222 Jy ! Component: 100 - total flux cleaned = 0.00460838 Jy ! Component: 150 - total flux cleaned = 0.00428204 Jy ! Component: 200 - total flux cleaned = 0.00397452 Jy ! Total flux subtracted in 200 components = 0.00397452 Jy ! Clean residual min=-0.006582 max=0.007032 Jy/beam ! Clean residual mean=-0.000005 rms=0.001656 Jy/beam ! Combined flux in latest and established models = 0.744289 Jy ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 91 components and 0.744289 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.069876Jy sigma=0.000685 ! Fit after self-cal, rms=0.069833Jy sigma=0.000685 ! Inverting map ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000623583 Jy ! Component: 100 - total flux cleaned = -0.000759015 Jy ! Component: 150 - total flux cleaned = -0.000758712 Jy ! Component: 200 - total flux cleaned = -0.000762989 Jy ! Total flux subtracted in 200 components = -0.000762989 Jy ! Clean residual min=-0.006476 max=0.006770 Jy/beam ! Clean residual mean=-0.000006 rms=0.001617 Jy/beam ! Combined flux in latest and established models = 0.743526 Jy ! Performing phase self-cal ! Adding 22 model components to the UV plane model. ! The established model now contains 98 components and 0.743525 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.069142Jy sigma=0.000680 ! Fit after self-cal, rms=0.069115Jy sigma=0.000680 ! Inverting map ! Performing amp+phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.069115Jy sigma=0.000680 ! Fit after self-cal, rms=0.067731Jy sigma=0.000677 print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.674 mas, bmaj=7.527 mas, bpa=-12 degrees ! Estimated noise=1808.34 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.5725 Jy ! Component: 100 - total flux cleaned = 0.704942 Jy ! Component: 150 - total flux cleaned = 0.732906 Jy ! Component: 200 - total flux cleaned = 0.73887 Jy ! Total flux subtracted in 200 components = 0.73887 Jy ! Clean residual min=-0.024703 max=0.020598 Jy/beam ! Clean residual mean=-0.000002 rms=0.004570 Jy/beam ! Combined flux in latest and established models = 0.73887 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 9 model components to the UV plane model. ! The established model now contains 9 components and 0.73887 Jy ! Inverting map and beam ! Estimated beam: bmin=3.353 mas, bmaj=8.522 mas, bpa=-9.58 degrees ! Estimated noise=1328.41 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00406912 Jy ! Component: 100 - total flux cleaned = 0.00415927 Jy ! Component: 150 - total flux cleaned = 0.00421215 Jy ! Component: 200 - total flux cleaned = 0.00370915 Jy ! Total flux subtracted in 200 components = 0.00370915 Jy ! Clean residual min=-0.010568 max=0.009939 Jy/beam ! Clean residual mean=0.000004 rms=0.002309 Jy/beam ! Combined flux in latest and established models = 0.742579 Jy ! Adding 17 model components to the UV plane model. ! The established model now contains 19 components and 0.742579 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.332 mas, bmaj=19.47 mas, bpa=-2.428 degrees ! Estimated noise=1519.93 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00473129 Jy ! Component: 100 - total flux cleaned = 0.00542711 Jy ! Component: 150 - total flux cleaned = 0.00562999 Jy ! Component: 200 - total flux cleaned = 0.00581367 Jy ! Total flux subtracted in 200 components = 0.00581367 Jy ! Clean residual min=-0.006928 max=0.005912 Jy/beam ! Clean residual mean=0.000013 rms=0.001873 Jy/beam ! Combined flux in latest and established models = 0.748392 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000179069 Jy ! Component: 100 - total flux cleaned = 0.000346076 Jy ! Component: 150 - total flux cleaned = 0.000504711 Jy ! Component: 200 - total flux cleaned = 0.000506959 Jy ! Total flux subtracted in 200 components = 0.000506959 Jy ! Clean residual min=-0.006726 max=0.005661 Jy/beam ! Clean residual mean=0.000011 rms=0.001797 Jy/beam ! Combined flux in latest and established models = 0.748899 Jy ! Adding 20 model components to the UV plane model. ! The established model now contains 36 components and 0.748899 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.353 mas, bmaj=8.522 mas, bpa=-9.58 degrees ! Estimated noise=1328.41 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000374138 Jy ! Component: 100 - total flux cleaned = -0.00142282 Jy ! Component: 150 - total flux cleaned = -0.00202513 Jy ! Component: 200 - total flux cleaned = -0.00257517 Jy ! Total flux subtracted in 200 components = -0.00257517 Jy ! Clean residual min=-0.008532 max=0.007492 Jy/beam ! Clean residual mean=0.000001 rms=0.001783 Jy/beam ! Combined flux in latest and established models = 0.746324 Jy selfcal ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 46 components and 0.746324 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.071849Jy sigma=0.000700 ! Fit after self-cal, rms=0.071813Jy sigma=0.000699 wmodel J1625-2527_S_2017_02_24_pus_map.mod ! Writing 46 model components to file: J1625-2527_S_2017_02_24_pus_map.mod wobs J1625-2527_S_2017_02_24_pus_uvs.fits ! Writing UV FITS file: J1625-2527_S_2017_02_24_pus_uvs.fits wwins J1625-2527_S_2017_02_24_pus_map.win ! wwins: Wrote 2 windows to J1625-2527_S_2017_02_24_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.000379239 Jy ! Component: 100 - total flux cleaned = -0.000515757 Jy ! Component: 150 - total flux cleaned = -0.00039191 Jy ! Component: 200 - total flux cleaned = -0.000509957 Jy ! Component: 250 - total flux cleaned = -0.000506254 Jy ! Component: 300 - total flux cleaned = -0.000725329 Jy ! Component: 350 - total flux cleaned = -0.001043 Jy ! Component: 400 - total flux cleaned = -0.00135134 Jy ! Component: 450 - total flux cleaned = -0.00165182 Jy ! Component: 500 - total flux cleaned = -0.00175323 Jy ! Component: 550 - total flux cleaned = -0.00185109 Jy ! Component: 600 - total flux cleaned = -0.00166858 Jy ! Component: 650 - total flux cleaned = -0.00157927 Jy ! Component: 700 - total flux cleaned = -0.00131532 Jy ! Component: 750 - total flux cleaned = -0.00131419 Jy ! Component: 800 - total flux cleaned = -0.00106232 Jy ! Component: 850 - total flux cleaned = -0.000898499 Jy ! Component: 900 - total flux cleaned = -0.000978415 Jy ! Component: 950 - total flux cleaned = -0.000820412 Jy ! Component: 1000 - total flux cleaned = -0.000897137 Jy ! Component: 1050 - total flux cleaned = -0.0008951 Jy ! Component: 1100 - total flux cleaned = -0.000819483 Jy ! Component: 1150 - total flux cleaned = -0.000819729 Jy ! Component: 1200 - total flux cleaned = -0.000965325 Jy ! Component: 1250 - total flux cleaned = -0.00110858 Jy ! Component: 1300 - total flux cleaned = -0.00118073 Jy ! Component: 1350 - total flux cleaned = -0.00125014 Jy ! Component: 1400 - total flux cleaned = -0.00138788 Jy ! Component: 1450 - total flux cleaned = -0.00125293 Jy ! Component: 1500 - total flux cleaned = -0.00151983 Jy ! Component: 1550 - total flux cleaned = -0.00132196 Jy ! Component: 1600 - total flux cleaned = -0.00132186 Jy ! Component: 1650 - total flux cleaned = -0.00138518 Jy ! Component: 1700 - total flux cleaned = -0.00119667 Jy ! Component: 1750 - total flux cleaned = -0.00119647 Jy ! Component: 1800 - total flux cleaned = -0.00113503 Jy ! Component: 1850 - total flux cleaned = -0.00095386 Jy ! Component: 1900 - total flux cleaned = -0.00101389 Jy ! Component: 1950 - total flux cleaned = -0.000720146 Jy ! Component: 2000 - total flux cleaned = -0.000894878 Jy ! Component: 2050 - total flux cleaned = -0.000607744 Jy ! Component: 2100 - total flux cleaned = -0.000608951 Jy ! Component: 2150 - total flux cleaned = -0.000553442 Jy ! Component: 2200 - total flux cleaned = -0.000554629 Jy ! Component: 2250 - total flux cleaned = -0.000444937 Jy ! Component: 2300 - total flux cleaned = -0.000498868 Jy ! Component: 2350 - total flux cleaned = -0.000231266 Jy ! Component: 2400 - total flux cleaned = -0.000231157 Jy ! Component: 2450 - total flux cleaned = -0.000178739 Jy ! Component: 2500 - total flux cleaned = -0.000178619 Jy ! Component: 2550 - total flux cleaned = -0.000127597 Jy ! Component: 2600 - total flux cleaned = -0.000126971 Jy ! Component: 2650 - total flux cleaned = -0.000126433 Jy ! Component: 2700 - total flux cleaned = -7.644e-05 Jy ! Component: 2750 - total flux cleaned = 7.07971e-05 Jy ! Component: 2800 - total flux cleaned = -2.68665e-05 Jy ! Component: 2850 - total flux cleaned = 6.96103e-05 Jy ! Component: 2900 - total flux cleaned = -0.000122196 Jy ! Component: 2950 - total flux cleaned = -0.000122316 Jy ! Component: 3000 - total flux cleaned = -0.00016919 Jy ! Component: 3050 - total flux cleaned = -0.000308227 Jy ! Component: 3100 - total flux cleaned = -0.00039983 Jy ! Component: 3150 - total flux cleaned = -0.000490875 Jy ! Component: 3200 - total flux cleaned = -0.00062663 Jy ! Component: 3250 - total flux cleaned = -0.000446962 Jy ! Component: 3300 - total flux cleaned = -0.000668913 Jy ! Component: 3350 - total flux cleaned = -0.000580753 Jy ! Component: 3400 - total flux cleaned = -0.000537018 Jy ! Component: 3450 - total flux cleaned = -0.000494314 Jy ! Component: 3500 - total flux cleaned = -0.000537436 Jy ! Component: 3550 - total flux cleaned = -0.000495048 Jy ! Component: 3600 - total flux cleaned = -0.000621423 Jy ! Component: 3650 - total flux cleaned = -0.000537804 Jy ! Component: 3700 - total flux cleaned = -0.000454893 Jy ! Component: 3750 - total flux cleaned = -0.00066049 Jy ! Component: 3800 - total flux cleaned = -0.000538132 Jy ! Component: 3850 - total flux cleaned = -0.000740371 Jy ! Component: 3900 - total flux cleaned = -0.000740401 Jy ! Component: 3950 - total flux cleaned = -0.000819741 Jy ! Component: 4000 - total flux cleaned = -0.000859245 Jy ! Component: 4050 - total flux cleaned = -0.000781091 Jy ! Total flux subtracted in 4096 components = -0.00082027 Jy ! Clean residual min=-0.002142 max=0.001973 Jy/beam ! Clean residual mean=0.000001 rms=0.000730 Jy/beam ! Combined flux in latest and established models = 0.745504 Jy keep ! Adding 265 model components to the UV plane model. ! The established model now contains 309 components and 0.745504 Jy ![Exited script file: muppet] wmap "J1625-2527_S_2017_02_24_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.353 x 8.522 at -9.58 degrees (North through East) ! Clean map min=-0.010856 max=0.73928 Jy/beam ! Writing clean map to FITS file: J1625-2527_S_2017_02_24_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.73928 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000723248 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.293494 0.293494 0.586989 1.17398 2.34795 4.69591 9.39182 18.7836 37.5673 75.1345 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0021 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.739 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.353 x 8.522 at -9.58 degrees (North through East) ! Clean map min=-0.010856 max=0.73928 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J1625-2527_S_2017_02_24_pus_uvs.log closed on Sat May 4 11:30:41 2019