! Started logfile: J1625-2527_S_2017_01_21_pus_uvs.log on Sun May 5 15:58:43 2019 obs J1625-2527_S_2017_01_21_pus_uva.fits ! Reading UV FITS file: J1625-2527_S_2017_01_21_pus_uva.fits ! AN table 1: 8 integrations on 36 of 36 possible baselines. ! Apparent sampling: 0.666667 visibilities/baseline/integration-bin. ! Found source: J1625-2527 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 558 lines of history. ! ! Reading 768 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J1625-2527_S_2017_01_21_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 13 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 13 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 13 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 39 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.328507Jy sigma=0.001497 ! Fit after self-cal, rms=0.313411Jy sigma=0.001383 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.363 mas, bmaj=6.845 mas, bpa=-12.36 degrees ! Estimated noise=5904.04 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.705575 Jy ! Component: 100 - total flux cleaned = 0.873366 Jy ! Total flux subtracted in 100 components = 0.873366 Jy ! Clean residual min=-0.080560 max=0.135590 Jy/beam ! Clean residual mean=-0.000038 rms=0.024088 Jy/beam ! Combined flux in latest and established models = 0.873366 Jy ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 9 components and 0.873366 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.282662Jy sigma=0.001466 ! Fit after self-cal, rms=0.282723Jy sigma=0.001466 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.751 mas, bmaj=6.968 mas, bpa=-10.9 degrees ! Estimated noise=5084.07 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0794828 Jy ! Component: 100 - total flux cleaned = 0.123245 Jy ! Component: 150 - total flux cleaned = 0.149828 Jy ! Component: 200 - total flux cleaned = 0.166094 Jy ! Total flux subtracted in 200 components = 0.166094 Jy ! Clean residual min=-0.051030 max=0.123135 Jy/beam ! Clean residual mean=-0.000066 rms=0.022821 Jy/beam ! Combined flux in latest and established models = 1.03946 Jy ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 25 components and 1.03946 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.276594Jy sigma=0.001229 ! Fit after self-cal, rms=0.276721Jy sigma=0.001227 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.96 FD 1.00* HN 0.95 LA 0.98 ! MK 0.94 NL 0.92 OV 1.89 PT 0.91 ! SC 1.00 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 0.98 FD 1.00* HN 1.02 LA 0.91 ! MK 0.96 NL 0.94 OV 1.85 PT 0.89 ! SC 1.07 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 0.97 FD 1.00* HN 1.01 LA 0.91 ! MK 0.97 NL 0.92 OV 1.80 PT 0.89 ! SC 1.01 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 1.02 FD 1.00* HN 0.96 LA 1.00* ! MK 1.30 NL 1.00* OV 2.07 PT 0.92 ! SC 1.00* ! ! ! Fit before self-cal, rms=0.276721Jy sigma=0.001227 ! Fit after self-cal, rms=0.205408Jy sigma=0.000661 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.752 mas, bmaj=6.984 mas, bpa=-11.27 degrees ! Estimated noise=5087.68 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000164236 Jy ! Component: 100 - total flux cleaned = -0.00125138 Jy ! Component: 150 - total flux cleaned = -0.00155298 Jy ! Component: 200 - total flux cleaned = -0.0015604 Jy ! Total flux subtracted in 200 components = -0.0015604 Jy ! Clean residual min=-0.014284 max=0.015004 Jy/beam ! Clean residual mean=0.000031 rms=0.003693 Jy/beam ! Combined flux in latest and established models = 1.0379 Jy ! Performing phase self-cal ! Adding 7 model components to the UV plane model. ! The established model now contains 31 components and 1.0379 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.204098Jy sigma=0.000653 ! Fit after self-cal, rms=0.205776Jy sigma=0.000651 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.205776Jy sigma=0.000651 ! Fit after self-cal, rms=0.205825Jy sigma=0.000651 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.752 mas, bmaj=6.983 mas, bpa=-11.22 degrees ! Estimated noise=5083.82 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -8.60387e-05 Jy ! Component: 100 - total flux cleaned = -0.00169409 Jy ! Component: 150 - total flux cleaned = -0.00188094 Jy ! Component: 200 - total flux cleaned = -0.0020556 Jy ! Total flux subtracted in 200 components = -0.0020556 Jy ! Clean residual min=-0.013817 max=0.012716 Jy/beam ! Clean residual mean=0.000031 rms=0.003437 Jy/beam ! Combined flux in latest and established models = 1.03584 Jy selfcal ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 34 components and 1.03584 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.205142Jy sigma=0.000648 ! Fit after self-cal, rms=0.205218Jy sigma=0.000647 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 7.59432e-05 Jy ! Component: 100 - total flux cleaned = -0.000261464 Jy ! Component: 150 - total flux cleaned = -0.000266092 Jy ! Component: 200 - total flux cleaned = -0.000269741 Jy ! Total flux subtracted in 200 components = -0.000269741 Jy ! Clean residual min=-0.013514 max=0.012323 Jy/beam ! Clean residual mean=0.000031 rms=0.003329 Jy/beam ! Combined flux in latest and established models = 1.03557 Jy ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 40 components and 1.03557 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.204851Jy sigma=0.000646 ! Fit after self-cal, rms=0.204949Jy sigma=0.000645 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.204949Jy sigma=0.000645 ! Fit after self-cal, rms=0.204794Jy sigma=0.000645 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.753 mas, bmaj=6.985 mas, bpa=-11.19 degrees ! Estimated noise=5080.25 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00111628 Jy ! Component: 100 - total flux cleaned = -0.00149292 Jy ! Component: 150 - total flux cleaned = -0.00159922 Jy ! Component: 200 - total flux cleaned = -0.00169447 Jy ! Total flux subtracted in 200 components = -0.00169447 Jy ! Clean residual min=-0.013295 max=0.012231 Jy/beam ! Clean residual mean=0.000030 rms=0.003262 Jy/beam ! Combined flux in latest and established models = 1.03388 Jy selfcal ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 42 components and 1.03388 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.204521Jy sigma=0.000645 ! Fit after self-cal, rms=0.204587Jy sigma=0.000644 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000158325 Jy ! Component: 100 - total flux cleaned = -0.000260626 Jy ! Component: 150 - total flux cleaned = -0.000259998 Jy ! Component: 200 - total flux cleaned = -0.000184866 Jy ! Total flux subtracted in 200 components = -0.000184866 Jy ! Clean residual min=-0.013159 max=0.012347 Jy/beam ! Clean residual mean=0.000030 rms=0.003229 Jy/beam ! Combined flux in latest and established models = 1.03369 Jy ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 49 components and 1.03369 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.204418Jy sigma=0.000644 ! Fit after self-cal, rms=0.204499Jy sigma=0.000644 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.204499Jy sigma=0.000644 ! Fit after self-cal, rms=0.204431Jy sigma=0.000644 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=6.679 mas, bmaj=15.02 mas, bpa=-2.352 degrees ! Estimated noise=7302.33 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000805319 Jy ! Component: 100 - total flux cleaned = -0.000787765 Jy ! Component: 150 - total flux cleaned = -0.000793603 Jy ! Component: 200 - total flux cleaned = -0.000652029 Jy ! Total flux subtracted in 200 components = -0.000652029 Jy ! Clean residual min=-0.015471 max=0.017777 Jy/beam ! Clean residual mean=0.000064 rms=0.004926 Jy/beam ! Combined flux in latest and established models = 1.03304 Jy selfcal ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 55 components and 1.03304 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.204309Jy sigma=0.000644 ! Fit after self-cal, rms=0.204365Jy sigma=0.000644 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000140671 Jy ! Component: 100 - total flux cleaned = -5.38602e-05 Jy ! Component: 150 - total flux cleaned = 1.28658e-05 Jy ! Component: 200 - total flux cleaned = 0.000137925 Jy ! Total flux subtracted in 200 components = 0.000137925 Jy ! Clean residual min=-0.015491 max=0.017752 Jy/beam ! Clean residual mean=0.000064 rms=0.004911 Jy/beam ! Combined flux in latest and established models = 1.03318 Jy ! Performing phase self-cal ! Adding 8 model components to the UV plane model. ! The established model now contains 57 components and 1.03318 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.204300Jy sigma=0.000644 ! Fit after self-cal, rms=0.204341Jy sigma=0.000644 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=2.755 mas, bmaj=6.988 mas, bpa=-11.18 degrees ! Estimated noise=5079.65 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.755 x 6.988 at -11.18 degrees (North through East) ! Clean map min=-0.012839 max=0.91017 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if ! Performing amp+phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.204341Jy sigma=0.000644 ! Fit after self-cal, rms=0.198527Jy sigma=0.000585 ! Inverting map and beam ! Estimated beam: bmin=2.758 mas, bmaj=6.993 mas, bpa=-11.14 degrees ! Estimated noise=5085.11 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00163844 Jy ! Component: 100 - total flux cleaned = -0.00130235 Jy ! Component: 150 - total flux cleaned = -0.00108429 Jy ! Component: 200 - total flux cleaned = -0.00101818 Jy ! Total flux subtracted in 200 components = -0.00101818 Jy ! Clean residual min=-0.013359 max=0.012907 Jy/beam ! Clean residual mean=0.000028 rms=0.003204 Jy/beam ! Combined flux in latest and established models = 1.03216 Jy ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 62 components and 1.03216 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.198402Jy sigma=0.000584 ! Fit after self-cal, rms=0.198450Jy sigma=0.000584 ! Inverting map ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000152218 Jy ! Component: 100 - total flux cleaned = -0.000216212 Jy ! Component: 150 - total flux cleaned = -5.2518e-05 Jy ! Component: 200 - total flux cleaned = -5.87772e-07 Jy ! Total flux subtracted in 200 components = -5.87772e-07 Jy ! Clean residual min=-0.013238 max=0.012863 Jy/beam ! Clean residual mean=0.000028 rms=0.003194 Jy/beam ! Combined flux in latest and established models = 1.03216 Jy ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 65 components and 1.03216 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.198379Jy sigma=0.000584 ! Fit after self-cal, rms=0.198434Jy sigma=0.000584 ! Inverting map ! Performing amp+phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.198434Jy sigma=0.000584 ! Fit after self-cal, rms=0.198438Jy sigma=0.000584 print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.38 mas, bmaj=6.915 mas, bpa=-12.59 degrees ! Estimated noise=5868.43 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.700798 Jy ! Component: 100 - total flux cleaned = 0.866843 Jy ! Component: 150 - total flux cleaned = 0.932703 Jy ! Component: 200 - total flux cleaned = 0.967722 Jy ! Total flux subtracted in 200 components = 0.967722 Jy ! Clean residual min=-0.022803 max=0.024004 Jy/beam ! Clean residual mean=-0.000001 rms=0.006024 Jy/beam ! Combined flux in latest and established models = 0.967722 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 18 model components to the UV plane model. ! The established model now contains 18 components and 0.967722 Jy ! Inverting map and beam ! Estimated beam: bmin=2.761 mas, bmaj=6.998 mas, bpa=-11.13 degrees ! Estimated noise=5087.45 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0285189 Jy ! Component: 100 - total flux cleaned = 0.0416732 Jy ! Component: 150 - total flux cleaned = 0.045464 Jy ! Component: 200 - total flux cleaned = 0.0474121 Jy ! Total flux subtracted in 200 components = 0.0474121 Jy ! Clean residual min=-0.017099 max=0.016723 Jy/beam ! Clean residual mean=0.000026 rms=0.004341 Jy/beam ! Combined flux in latest and established models = 1.01513 Jy ! Adding 19 model components to the UV plane model. ! The established model now contains 31 components and 1.01513 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=6.681 mas, bmaj=15.05 mas, bpa=-2.349 degrees ! Estimated noise=7293.85 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0101391 Jy ! Component: 100 - total flux cleaned = 0.0112337 Jy ! Component: 150 - total flux cleaned = 0.0120861 Jy ! Component: 200 - total flux cleaned = 0.0127589 Jy ! Total flux subtracted in 200 components = 0.0127589 Jy ! Clean residual min=-0.015452 max=0.017445 Jy/beam ! Clean residual mean=0.000060 rms=0.005110 Jy/beam ! Combined flux in latest and established models = 1.02789 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000544267 Jy ! Component: 100 - total flux cleaned = 0.000993417 Jy ! Component: 150 - total flux cleaned = 0.0013622 Jy ! Component: 200 - total flux cleaned = 0.00167452 Jy ! Total flux subtracted in 200 components = 0.00167452 Jy ! Clean residual min=-0.015199 max=0.017995 Jy/beam ! Clean residual mean=0.000060 rms=0.004922 Jy/beam ! Combined flux in latest and established models = 1.02957 Jy ! Adding 16 model components to the UV plane model. ! The established model now contains 42 components and 1.02957 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=2.761 mas, bmaj=6.998 mas, bpa=-11.13 degrees ! Estimated noise=5087.45 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.0040187 Jy ! Component: 100 - total flux cleaned = -0.00458966 Jy ! Component: 150 - total flux cleaned = -0.00481163 Jy ! Component: 200 - total flux cleaned = -0.00421554 Jy ! Total flux subtracted in 200 components = -0.00421554 Jy ! Clean residual min=-0.016385 max=0.015519 Jy/beam ! Clean residual mean=0.000027 rms=0.003599 Jy/beam ! Combined flux in latest and established models = 1.02535 Jy selfcal ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 56 components and 1.02535 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.198630Jy sigma=0.000592 ! Fit after self-cal, rms=0.198708Jy sigma=0.000591 wmodel J1625-2527_S_2017_01_21_pus_map.mod ! Writing 56 model components to file: J1625-2527_S_2017_01_21_pus_map.mod wobs J1625-2527_S_2017_01_21_pus_uvs.fits ! Writing UV FITS file: J1625-2527_S_2017_01_21_pus_uvs.fits wwins J1625-2527_S_2017_01_21_pus_map.win ! wwins: Wrote 1 windows to J1625-2527_S_2017_01_21_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.00114648 Jy ! Component: 100 - total flux cleaned = -0.000239225 Jy ! Component: 150 - total flux cleaned = 0.00159913 Jy ! Component: 200 - total flux cleaned = 0.0016046 Jy ! Component: 250 - total flux cleaned = 0.00143823 Jy ! Component: 300 - total flux cleaned = 0.00193133 Jy ! Component: 350 - total flux cleaned = 0.00223738 Jy ! Component: 400 - total flux cleaned = 0.00267465 Jy ! Component: 450 - total flux cleaned = 0.00323384 Jy ! Component: 500 - total flux cleaned = 0.00377002 Jy ! Component: 550 - total flux cleaned = 0.00363628 Jy ! Component: 600 - total flux cleaned = 0.00338396 Jy ! Component: 650 - total flux cleaned = 0.00338383 Jy ! Component: 700 - total flux cleaned = 0.00326415 Jy ! Component: 750 - total flux cleaned = 0.00326507 Jy ! Component: 800 - total flux cleaned = 0.00337719 Jy ! Component: 850 - total flux cleaned = 0.00337669 Jy ! Component: 900 - total flux cleaned = 0.00348508 Jy ! Component: 950 - total flux cleaned = 0.00400426 Jy ! Component: 1000 - total flux cleaned = 0.00410555 Jy ! Component: 1050 - total flux cleaned = 0.00460554 Jy ! Component: 1100 - total flux cleaned = 0.00538861 Jy ! Component: 1150 - total flux cleaned = 0.00615611 Jy ! Component: 1200 - total flux cleaned = 0.00672403 Jy ! Component: 1250 - total flux cleaned = 0.00747006 Jy ! Component: 1300 - total flux cleaned = 0.00811233 Jy ! Component: 1350 - total flux cleaned = 0.00856688 Jy ! Component: 1400 - total flux cleaned = 0.00910538 Jy ! Component: 1450 - total flux cleaned = 0.00963825 Jy ! Component: 1500 - total flux cleaned = 0.0102538 Jy ! Component: 1550 - total flux cleaned = 0.0107754 Jy ! Component: 1600 - total flux cleaned = 0.011293 Jy ! Component: 1650 - total flux cleaned = 0.0119774 Jy ! Component: 1700 - total flux cleaned = 0.0124858 Jy ! Component: 1750 - total flux cleaned = 0.0130741 Jy ! Component: 1800 - total flux cleaned = 0.0135751 Jy ! Component: 1850 - total flux cleaned = 0.0143197 Jy ! Component: 1900 - total flux cleaned = 0.0149764 Jy ! Component: 1950 - total flux cleaned = 0.0155466 Jy ! Component: 2000 - total flux cleaned = 0.0159519 Jy ! Component: 2050 - total flux cleaned = 0.0161137 Jy ! Component: 2100 - total flux cleaned = 0.0162758 Jy ! Component: 2150 - total flux cleaned = 0.0166804 Jy ! Component: 2200 - total flux cleaned = 0.0170043 Jy ! Component: 2250 - total flux cleaned = 0.0173292 Jy ! Component: 2300 - total flux cleaned = 0.0175729 Jy ! Component: 2350 - total flux cleaned = 0.0179796 Jy ! Component: 2400 - total flux cleaned = 0.0181421 Jy ! Component: 2450 - total flux cleaned = 0.0185511 Jy ! Component: 2500 - total flux cleaned = 0.018798 Jy ! Component: 2550 - total flux cleaned = 0.0188804 Jy ! Component: 2600 - total flux cleaned = 0.0192121 Jy ! Component: 2650 - total flux cleaned = 0.0192958 Jy ! Component: 2700 - total flux cleaned = 0.0194641 Jy ! Component: 2750 - total flux cleaned = 0.0196344 Jy ! Component: 2800 - total flux cleaned = 0.0197199 Jy ! Component: 2850 - total flux cleaned = 0.0199804 Jy ! Component: 2900 - total flux cleaned = 0.0199804 Jy ! Component: 2950 - total flux cleaned = 0.0200694 Jy ! Component: 3000 - total flux cleaned = 0.0201602 Jy ! Component: 3050 - total flux cleaned = 0.0200697 Jy ! Component: 3100 - total flux cleaned = 0.0203444 Jy ! Component: 3150 - total flux cleaned = 0.0204371 Jy ! Component: 3200 - total flux cleaned = 0.0204377 Jy ! Component: 3250 - total flux cleaned = 0.020724 Jy ! Component: 3300 - total flux cleaned = 0.0206279 Jy ! Component: 3350 - total flux cleaned = 0.0207256 Jy ! Component: 3400 - total flux cleaned = 0.0208247 Jy ! Component: 3450 - total flux cleaned = 0.0208242 Jy ! Component: 3500 - total flux cleaned = 0.0208237 Jy ! Component: 3550 - total flux cleaned = 0.0208242 Jy ! Component: 3600 - total flux cleaned = 0.0207177 Jy ! Component: 3650 - total flux cleaned = 0.0208264 Jy ! Component: 3700 - total flux cleaned = 0.0207139 Jy ! Component: 3750 - total flux cleaned = 0.0207132 Jy ! Component: 3800 - total flux cleaned = 0.0208281 Jy ! Component: 3850 - total flux cleaned = 0.0208284 Jy ! Component: 3900 - total flux cleaned = 0.0207076 Jy ! Component: 3950 - total flux cleaned = 0.0207068 Jy ! Component: 4000 - total flux cleaned = 0.0207053 Jy ! Component: 4050 - total flux cleaned = 0.0207038 Jy ! Total flux subtracted in 4096 components = 0.0205725 Jy ! Clean residual min=-0.007490 max=0.008058 Jy/beam ! Clean residual mean=-0.000023 rms=0.001951 Jy/beam ! Combined flux in latest and established models = 1.04592 Jy keep ! Adding 210 model components to the UV plane model. ! The established model now contains 266 components and 1.04592 Jy ![Exited script file: muppet] wmap "J1625-2527_S_2017_01_21_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.761 x 6.998 at -11.13 degrees (North through East) ! Clean map min=-0.012579 max=0.91216 Jy/beam ! Writing clean map to FITS file: J1625-2527_S_2017_01_21_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.91216 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.00198594 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.653156 0.653156 1.30631 2.61262 5.22524 10.4505 20.901 41.802 83.6039 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0059 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.912 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.761 x 6.998 at -11.13 degrees (North through East) ! Clean map min=-0.012579 max=0.91216 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J1625-2527_S_2017_01_21_pus_uvs.log closed on Sun May 5 15:58:48 2019