! Started logfile: J1624-3516_S_2017_10_21_pus_uvs.log on Sat May 11 21:02:07 2019 obs J1624-3516_S_2017_10_21_pus_uva.fits ! Reading UV FITS file: J1624-3516_S_2017_10_21_pus_uva.fits ! AN table 1: 145 integrations on 36 of 36 possible baselines. ! Apparent sampling: 0.604598 visibilities/baseline/integration-bin. ! Found source: J1624-3516 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 644 lines of history. ! ! Reading 12624 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J1624-3516_S_2017_10_21_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 368 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 323 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 280 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 898 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.939289Jy sigma=0.006331 ! Fit after self-cal, rms=0.900586Jy sigma=0.006069 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.716 mas, bmaj=11.87 mas, bpa=-20.48 degrees ! Estimated noise=2303.04 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0760477 Jy ! Component: 100 - total flux cleaned = 0.0959617 Jy ! Total flux subtracted in 100 components = 0.0959617 Jy ! Clean residual min=-0.007309 max=0.008804 Jy/beam ! Clean residual mean=-0.000023 rms=0.002046 Jy/beam ! Combined flux in latest and established models = 0.0959617 Jy ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 15 components and 0.0959617 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.118702Jy sigma=0.000717 ! Fit after self-cal, rms=0.118564Jy sigma=0.000716 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.568 mas, bmaj=14.6 mas, bpa=-19.04 degrees ! Estimated noise=1122.78 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0144849 Jy ! Component: 100 - total flux cleaned = 0.0210484 Jy ! Component: 150 - total flux cleaned = 0.024299 Jy ! Component: 200 - total flux cleaned = 0.0259577 Jy ! Total flux subtracted in 200 components = 0.0259577 Jy ! Clean residual min=-0.005102 max=0.006112 Jy/beam ! Clean residual mean=-0.000029 rms=0.001414 Jy/beam ! Combined flux in latest and established models = 0.121919 Jy ! Performing phase self-cal ! Adding 36 model components to the UV plane model. ! The established model now contains 47 components and 0.121919 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.116817Jy sigma=0.000706 ! Fit after self-cal, rms=0.116852Jy sigma=0.000705 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.07 HN 1.00* KP 1.12 ! LA 1.01 MK 1.02 NL 0.88 OV 0.95 ! PT 0.95 ! ! ! Correcting IF 2. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.09 HN 1.01 KP 1.02 ! LA 1.02 MK 1.04 NL 1.17 OV 1.03 ! PT 0.89 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.12 HN 1.10 KP 1.07 ! LA 0.78 MK 1.00 NL 1.21 OV 0.92 ! PT 0.92 ! ! ! Correcting IF 4. ! A total of 213 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.17 HN 0.71 KP 1.00* ! LA 0.83 MK 1.14 NL 1.00* OV 1.00* ! PT 0.78 ! ! ! Fit before self-cal, rms=0.116852Jy sigma=0.000705 ! Fit after self-cal, rms=0.115453Jy sigma=0.000701 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.621 mas, bmaj=14.74 mas, bpa=-19.53 degrees ! Estimated noise=1148.19 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000203221 Jy ! Component: 100 - total flux cleaned = 0.000264285 Jy ! Component: 150 - total flux cleaned = 0.000309475 Jy ! Component: 200 - total flux cleaned = 0.000329475 Jy ! Total flux subtracted in 200 components = 0.000329475 Jy ! Clean residual min=-0.003535 max=0.003723 Jy/beam ! Clean residual mean=0.000002 rms=0.000917 Jy/beam ! Combined flux in latest and established models = 0.122249 Jy ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 59 components and 0.122249 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.115438Jy sigma=0.000701 ! Fit after self-cal, rms=0.115636Jy sigma=0.000700 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.115636Jy sigma=0.000700 ! Fit after self-cal, rms=0.116657Jy sigma=0.000699 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.626 mas, bmaj=14.82 mas, bpa=-19.64 degrees ! Estimated noise=1151.08 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000164885 Jy ! Component: 100 - total flux cleaned = -0.000185971 Jy ! Component: 150 - total flux cleaned = -0.000185546 Jy ! Component: 200 - total flux cleaned = -0.000168375 Jy ! Total flux subtracted in 200 components = -0.000168375 Jy ! Clean residual min=-0.003580 max=0.003204 Jy/beam ! Clean residual mean=0.000003 rms=0.000785 Jy/beam ! Combined flux in latest and established models = 0.12208 Jy selfcal ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 65 components and 0.12208 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.116649Jy sigma=0.000699 ! Fit after self-cal, rms=0.116763Jy sigma=0.000699 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 6.05573e-05 Jy ! Component: 100 - total flux cleaned = 6.0526e-05 Jy ! Component: 150 - total flux cleaned = 5.99984e-05 Jy ! Component: 200 - total flux cleaned = 5.98042e-05 Jy ! Total flux subtracted in 200 components = 5.98042e-05 Jy ! Clean residual min=-0.003556 max=0.003149 Jy/beam ! Clean residual mean=0.000001 rms=0.000779 Jy/beam ! Combined flux in latest and established models = 0.12214 Jy ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 67 components and 0.12214 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.116758Jy sigma=0.000699 ! Fit after self-cal, rms=0.116759Jy sigma=0.000699 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.116759Jy sigma=0.000699 ! Fit after self-cal, rms=0.117271Jy sigma=0.000699 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.629 mas, bmaj=14.84 mas, bpa=-19.59 degrees ! Estimated noise=1152.2 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000168639 Jy ! Component: 100 - total flux cleaned = -0.000169933 Jy ! Component: 150 - total flux cleaned = -0.000154936 Jy ! Component: 200 - total flux cleaned = -0.000139939 Jy ! Total flux subtracted in 200 components = -0.000139939 Jy ! Clean residual min=-0.003514 max=0.003132 Jy/beam ! Clean residual mean=0.000001 rms=0.000779 Jy/beam ! Combined flux in latest and established models = 0.122 Jy selfcal ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 69 components and 0.122 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.117266Jy sigma=0.000699 ! Fit after self-cal, rms=0.117299Jy sigma=0.000699 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 1.18515e-05 Jy ! Component: 100 - total flux cleaned = 1.12806e-05 Jy ! Component: 150 - total flux cleaned = 1.12342e-05 Jy ! Component: 200 - total flux cleaned = 1.04346e-05 Jy ! Total flux subtracted in 200 components = 1.04346e-05 Jy ! Clean residual min=-0.003500 max=0.003114 Jy/beam ! Clean residual mean=0.000001 rms=0.000776 Jy/beam ! Combined flux in latest and established models = 0.122011 Jy ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 73 components and 0.122011 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.117294Jy sigma=0.000699 ! Fit after self-cal, rms=0.117295Jy sigma=0.000699 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.117295Jy sigma=0.000699 ! Fit after self-cal, rms=0.117541Jy sigma=0.000699 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=9.556 mas, bmaj=31.32 mas, bpa=-8.336 degrees ! Estimated noise=1341.01 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -3.65499e-05 Jy ! Component: 100 - total flux cleaned = -2.87348e-05 Jy ! Component: 150 - total flux cleaned = -1.28097e-05 Jy ! Component: 200 - total flux cleaned = -6.00254e-06 Jy ! Total flux subtracted in 200 components = -6.00254e-06 Jy ! Clean residual min=-0.003354 max=0.002718 Jy/beam ! Clean residual mean=0.000002 rms=0.000881 Jy/beam ! Combined flux in latest and established models = 0.122005 Jy selfcal ! Performing phase self-cal ! Adding 6 model components to the UV plane model. ! The established model now contains 77 components and 0.122005 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.117541Jy sigma=0.000698 ! Fit after self-cal, rms=0.117552Jy sigma=0.000698 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 7.6212e-06 Jy ! Component: 100 - total flux cleaned = 2.46558e-05 Jy ! Component: 150 - total flux cleaned = 3.95299e-05 Jy ! Component: 200 - total flux cleaned = 4.00991e-05 Jy ! Total flux subtracted in 200 components = 4.00991e-05 Jy ! Clean residual min=-0.003357 max=0.002715 Jy/beam ! Clean residual mean=0.000002 rms=0.000880 Jy/beam ! Combined flux in latest and established models = 0.122045 Jy ! Performing phase self-cal ! Adding 7 model components to the UV plane model. ! The established model now contains 78 components and 0.122045 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.117552Jy sigma=0.000698 ! Fit after self-cal, rms=0.117551Jy sigma=0.000698 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.631 mas, bmaj=14.84 mas, bpa=-19.54 degrees ! Estimated noise=1152.63 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.631 x 14.84 at -19.54 degrees (North through East) ! Clean map min=-0.003346 max=0.10135 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.756 mas, bmaj=12.15 mas, bpa=-21.11 degrees ! Estimated noise=2418.51 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0776324 Jy ! Component: 100 - total flux cleaned = 0.0992918 Jy ! Component: 150 - total flux cleaned = 0.109925 Jy ! Component: 200 - total flux cleaned = 0.115512 Jy ! Total flux subtracted in 200 components = 0.115512 Jy ! Clean residual min=-0.006161 max=0.005368 Jy/beam ! Clean residual mean=-0.000003 rms=0.001528 Jy/beam ! Combined flux in latest and established models = 0.115512 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 34 model components to the UV plane model. ! The established model now contains 34 components and 0.115512 Jy ! Inverting map and beam ! Estimated beam: bmin=3.631 mas, bmaj=14.84 mas, bpa=-19.54 degrees ! Estimated noise=1152.63 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00390541 Jy ! Component: 100 - total flux cleaned = 0.00543495 Jy ! Component: 150 - total flux cleaned = 0.00568214 Jy ! Component: 200 - total flux cleaned = 0.00571668 Jy ! Total flux subtracted in 200 components = 0.00571668 Jy ! Clean residual min=-0.003621 max=0.003194 Jy/beam ! Clean residual mean=0.000000 rms=0.000817 Jy/beam ! Combined flux in latest and established models = 0.121229 Jy ! Adding 17 model components to the UV plane model. ! The established model now contains 50 components and 0.121229 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=9.556 mas, bmaj=31.32 mas, bpa=-8.336 degrees ! Estimated noise=1341.01 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000386739 Jy ! Component: 100 - total flux cleaned = 0.000407978 Jy ! Component: 150 - total flux cleaned = 0.000456591 Jy ! Component: 200 - total flux cleaned = 0.00049531 Jy ! Total flux subtracted in 200 components = 0.00049531 Jy ! Clean residual min=-0.003380 max=0.002726 Jy/beam ! Clean residual mean=0.000001 rms=0.000888 Jy/beam ! Combined flux in latest and established models = 0.121724 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 3.07989e-05 Jy ! Component: 100 - total flux cleaned = 6.23134e-05 Jy ! Component: 150 - total flux cleaned = 7.58729e-05 Jy ! Component: 200 - total flux cleaned = 8.91477e-05 Jy ! Total flux subtracted in 200 components = 8.91477e-05 Jy ! Clean residual min=-0.003368 max=0.002724 Jy/beam ! Clean residual mean=0.000001 rms=0.000884 Jy/beam ! Combined flux in latest and established models = 0.121813 Jy ! Adding 6 model components to the UV plane model. ! The established model now contains 56 components and 0.121813 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.631 mas, bmaj=14.84 mas, bpa=-19.54 degrees ! Estimated noise=1152.63 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000185579 Jy ! Component: 100 - total flux cleaned = -0.000159458 Jy ! Component: 150 - total flux cleaned = -0.000110404 Jy ! Component: 200 - total flux cleaned = -0.000110176 Jy ! Total flux subtracted in 200 components = -0.000110176 Jy ! Clean residual min=-0.003553 max=0.003227 Jy/beam ! Clean residual mean=0.000001 rms=0.000795 Jy/beam ! Combined flux in latest and established models = 0.121703 Jy selfcal ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 64 components and 0.121703 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.117567Jy sigma=0.000699 ! Fit after self-cal, rms=0.117554Jy sigma=0.000699 wmodel J1624-3516_S_2017_10_21_pus_map.mod ! Writing 64 model components to file: J1624-3516_S_2017_10_21_pus_map.mod wobs J1624-3516_S_2017_10_21_pus_uvs.fits ! Writing UV FITS file: J1624-3516_S_2017_10_21_pus_uvs.fits wwins J1624-3516_S_2017_10_21_pus_map.win ! wwins: Wrote 1 windows to J1624-3516_S_2017_10_21_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.000873924 Jy ! Component: 100 - total flux cleaned = -0.0014554 Jy ! Component: 150 - total flux cleaned = -0.00188721 Jy ! Component: 200 - total flux cleaned = -0.00215502 Jy ! Component: 250 - total flux cleaned = -0.00240308 Jy ! Component: 300 - total flux cleaned = -0.00252027 Jy ! Component: 350 - total flux cleaned = -0.00252016 Jy ! Component: 400 - total flux cleaned = -0.00238095 Jy ! Component: 450 - total flux cleaned = -0.00221387 Jy ! Component: 500 - total flux cleaned = -0.00201939 Jy ! Component: 550 - total flux cleaned = -0.00189452 Jy ! Component: 600 - total flux cleaned = -0.001743 Jy ! Component: 650 - total flux cleaned = -0.001625 Jy ! Component: 700 - total flux cleaned = -0.00148052 Jy ! Component: 750 - total flux cleaned = -0.00131204 Jy ! Component: 800 - total flux cleaned = -0.00117519 Jy ! Component: 850 - total flux cleaned = -0.000960961 Jy ! Component: 900 - total flux cleaned = -0.000777931 Jy ! Component: 950 - total flux cleaned = -0.000598525 Jy ! Component: 1000 - total flux cleaned = -0.000422426 Jy ! Component: 1050 - total flux cleaned = -0.00025019 Jy ! Component: 1100 - total flux cleaned = -5.68191e-05 Jy ! Component: 1150 - total flux cleaned = 0.000203286 Jy ! Component: 1200 - total flux cleaned = 0.000272931 Jy ! Component: 1250 - total flux cleaned = 0.000479167 Jy ! Component: 1300 - total flux cleaned = 0.000569095 Jy ! Component: 1350 - total flux cleaned = 0.000679859 Jy ! Component: 1400 - total flux cleaned = 0.000788399 Jy ! Component: 1450 - total flux cleaned = 0.000830757 Jy ! Component: 1500 - total flux cleaned = 0.000915705 Jy ! Component: 1550 - total flux cleaned = 0.00102019 Jy ! Component: 1600 - total flux cleaned = 0.00110231 Jy ! Component: 1650 - total flux cleaned = 0.00126386 Jy ! Component: 1700 - total flux cleaned = 0.00130356 Jy ! Component: 1750 - total flux cleaned = 0.00144162 Jy ! Component: 1800 - total flux cleaned = 0.00150025 Jy ! Component: 1850 - total flux cleaned = 0.00161569 Jy ! Component: 1900 - total flux cleaned = 0.00171069 Jy ! Component: 1950 - total flux cleaned = 0.00176729 Jy ! Component: 2000 - total flux cleaned = 0.00186046 Jy ! Component: 2050 - total flux cleaned = 0.00197107 Jy ! Component: 2100 - total flux cleaned = 0.00202573 Jy ! Component: 2150 - total flux cleaned = 0.0020619 Jy ! Component: 2200 - total flux cleaned = 0.00207991 Jy ! Component: 2250 - total flux cleaned = 0.00207975 Jy ! Component: 2300 - total flux cleaned = 0.00209732 Jy ! Component: 2350 - total flux cleaned = 0.00209722 Jy ! Component: 2400 - total flux cleaned = 0.00211468 Jy ! Component: 2450 - total flux cleaned = 0.00209734 Jy ! Component: 2500 - total flux cleaned = 0.002132 Jy ! Component: 2550 - total flux cleaned = 0.00213191 Jy ! Component: 2600 - total flux cleaned = 0.00216612 Jy ! Component: 2650 - total flux cleaned = 0.00211486 Jy ! Component: 2700 - total flux cleaned = 0.00211478 Jy ! Component: 2750 - total flux cleaned = 0.00211473 Jy ! Component: 2800 - total flux cleaned = 0.00208101 Jy ! Component: 2850 - total flux cleaned = 0.00203068 Jy ! Component: 2900 - total flux cleaned = 0.0019807 Jy ! Component: 2950 - total flux cleaned = 0.00193088 Jy ! Component: 3000 - total flux cleaned = 0.00191434 Jy ! Component: 3050 - total flux cleaned = 0.0018813 Jy ! Component: 3100 - total flux cleaned = 0.00181527 Jy ! Component: 3150 - total flux cleaned = 0.0017493 Jy ! Component: 3200 - total flux cleaned = 0.0017328 Jy ! Component: 3250 - total flux cleaned = 0.00169994 Jy ! Component: 3300 - total flux cleaned = 0.0016342 Jy ! Component: 3350 - total flux cleaned = 0.00161782 Jy ! Component: 3400 - total flux cleaned = 0.00158503 Jy ! Component: 3450 - total flux cleaned = 0.00151936 Jy ! Component: 3500 - total flux cleaned = 0.00151934 Jy ! Component: 3550 - total flux cleaned = 0.00145352 Jy ! Component: 3600 - total flux cleaned = 0.00142061 Jy ! Component: 3650 - total flux cleaned = 0.00137126 Jy ! Component: 3700 - total flux cleaned = 0.00132179 Jy ! Component: 3750 - total flux cleaned = 0.0012888 Jy ! Component: 3800 - total flux cleaned = 0.00122279 Jy ! Component: 3850 - total flux cleaned = 0.00117308 Jy ! Component: 3900 - total flux cleaned = 0.00113998 Jy ! Component: 3950 - total flux cleaned = 0.00105689 Jy ! Component: 4000 - total flux cleaned = 0.00102361 Jy ! Component: 4050 - total flux cleaned = 0.0010069 Jy ! Total flux subtracted in 4096 components = 0.000956719 Jy ! Clean residual min=-0.000959 max=0.001016 Jy/beam ! Clean residual mean=-0.000004 rms=0.000303 Jy/beam ! Combined flux in latest and established models = 0.12266 Jy keep ! Adding 227 model components to the UV plane model. ! The established model now contains 291 components and 0.12266 Jy ![Exited script file: muppet] wmap "J1624-3516_S_2017_10_21_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.631 x 14.84 at -19.54 degrees (North through East) ! Clean map min=-0.002267 max=0.10297 Jy/beam ! Writing clean map to FITS file: J1624-3516_S_2017_10_21_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.102966 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000321962 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.938065 0.938065 1.87613 3.75226 7.50452 15.009 30.0181 60.0362 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0009 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.102 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.631 x 14.84 at -19.54 degrees (North through East) ! Clean map min=-0.002267 max=0.10297 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J1624-3516_S_2017_10_21_pus_uvs.log closed on Sat May 11 21:02:12 2019