! Started logfile: J1624-3213_S_2017_07_09_pus_uvs.log on Wed May 8 14:52:55 2019 obs J1624-3213_S_2017_07_09_pus_uva.fits ! Reading UV FITS file: J1624-3213_S_2017_07_09_pus_uva.fits ! AN table 1: 75 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.702222 visibilities/baseline/integration-bin. ! Found source: J1624-3213 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 594 lines of history. ! ! Reading 9480 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J1624-3213_S_2017_07_09_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 267 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 230 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 117 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 494 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.880708Jy sigma=0.006180 ! Fit after self-cal, rms=0.865450Jy sigma=0.006083 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.648 mas, bmaj=8.686 mas, bpa=4.674 degrees ! Estimated noise=1960.3 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0957663 Jy ! Component: 100 - total flux cleaned = 0.129595 Jy ! Total flux subtracted in 100 components = 0.129595 Jy ! Clean residual min=-0.010164 max=0.015681 Jy/beam ! Clean residual mean=-0.000232 rms=0.003704 Jy/beam ! Combined flux in latest and established models = 0.129595 Jy ! Performing phase self-cal ! Adding 23 model components to the UV plane model. ! The established model now contains 23 components and 0.129595 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.112994Jy sigma=0.000754 ! Fit after self-cal, rms=0.112873Jy sigma=0.000753 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.247 mas, bmaj=9.878 mas, bpa=3.269 degrees ! Estimated noise=1356.02 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0336057 Jy ! Component: 100 - total flux cleaned = 0.048235 Jy ! Component: 150 - total flux cleaned = 0.0550062 Jy ! Component: 200 - total flux cleaned = 0.0582718 Jy ! Total flux subtracted in 200 components = 0.0582718 Jy ! Clean residual min=-0.006459 max=0.008013 Jy/beam ! Clean residual mean=-0.000108 rms=0.001900 Jy/beam ! Combined flux in latest and established models = 0.187867 Jy ! Performing phase self-cal ! Adding 50 model components to the UV plane model. ! The established model now contains 65 components and 0.187867 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.105299Jy sigma=0.000676 ! Fit after self-cal, rms=0.105211Jy sigma=0.000675 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 0.94 HN 1.00* KP 0.98 ! LA 0.97 MK 1.13 NL 1.00* OV 0.98 ! PT 0.98 SC 1.00 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 0.96 HN 1.00* KP 0.96 ! LA 0.95 MK 1.02 NL 1.06 OV 1.02 ! PT 0.95 SC 1.04 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 2.61 FD 1.00 HN 1.00* KP 0.95 ! LA 0.94 MK 1.00 NL 1.01 OV 0.93 ! PT 0.97 SC 0.99 ! ! ! Correcting IF 4. ! A total of 108 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.03 HN 1.00* KP 1.00* ! LA 0.89 MK 0.98 NL 1.00* OV 1.00* ! PT 0.93 SC 1.00* ! ! ! Fit before self-cal, rms=0.105211Jy sigma=0.000675 ! Fit after self-cal, rms=0.143955Jy sigma=0.000653 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.238 mas, bmaj=9.887 mas, bpa=3.212 degrees ! Estimated noise=1379.04 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000262915 Jy ! Component: 100 - total flux cleaned = -0.000356587 Jy ! Component: 150 - total flux cleaned = -0.000355663 Jy ! Component: 200 - total flux cleaned = -0.000355794 Jy ! Total flux subtracted in 200 components = -0.000355794 Jy ! Clean residual min=-0.003895 max=0.003796 Jy/beam ! Clean residual mean=-0.000027 rms=0.000971 Jy/beam ! Combined flux in latest and established models = 0.187511 Jy ! Performing phase self-cal ! Adding 7 model components to the UV plane model. ! The established model now contains 66 components and 0.187511 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.143908Jy sigma=0.000653 ! Fit after self-cal, rms=0.144710Jy sigma=0.000653 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.144710Jy sigma=0.000653 ! Fit after self-cal, rms=0.153594Jy sigma=0.000651 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.234 mas, bmaj=9.84 mas, bpa=3.204 degrees ! Estimated noise=1377.1 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000194574 Jy ! Component: 100 - total flux cleaned = 8.71312e-05 Jy ! Component: 150 - total flux cleaned = 5.44172e-05 Jy ! Component: 200 - total flux cleaned = 5.2584e-05 Jy ! Total flux subtracted in 200 components = 5.2584e-05 Jy ! Clean residual min=-0.003356 max=0.003721 Jy/beam ! Clean residual mean=-0.000037 rms=0.000875 Jy/beam ! Combined flux in latest and established models = 0.187564 Jy selfcal ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 68 components and 0.187564 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.153571Jy sigma=0.000651 ! Fit after self-cal, rms=0.153629Jy sigma=0.000651 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-40, 106.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00223434 Jy ! Component: 100 - total flux cleaned = 0.00205242 Jy ! Component: 150 - total flux cleaned = 0.00205642 Jy ! Component: 200 - total flux cleaned = 0.00192773 Jy ! Total flux subtracted in 200 components = 0.00192773 Jy ! Clean residual min=-0.003266 max=0.003260 Jy/beam ! Clean residual mean=-0.000024 rms=0.000842 Jy/beam ! Combined flux in latest and established models = 0.189491 Jy ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 85 components and 0.189491 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.153500Jy sigma=0.000650 ! Fit after self-cal, rms=0.153489Jy sigma=0.000650 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.153489Jy sigma=0.000650 ! Fit after self-cal, rms=0.152963Jy sigma=0.000650 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.229 mas, bmaj=9.816 mas, bpa=3.305 degrees ! Estimated noise=1374.93 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00112355 Jy ! Component: 100 - total flux cleaned = 0.00112719 Jy ! Component: 150 - total flux cleaned = 0.00109054 Jy ! Component: 200 - total flux cleaned = 0.00101919 Jy ! Total flux subtracted in 200 components = 0.00101919 Jy ! Clean residual min=-0.003267 max=0.003033 Jy/beam ! Clean residual mean=-0.000031 rms=0.000829 Jy/beam ! Combined flux in latest and established models = 0.190511 Jy selfcal ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 92 components and 0.190511 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.152903Jy sigma=0.000650 ! Fit after self-cal, rms=0.152898Jy sigma=0.000650 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000128488 Jy ! Component: 100 - total flux cleaned = 9.36173e-05 Jy ! Component: 150 - total flux cleaned = 2.7428e-05 Jy ! Component: 200 - total flux cleaned = -6.63e-05 Jy ! Total flux subtracted in 200 components = -6.63e-05 Jy ! Clean residual min=-0.003300 max=0.002997 Jy/beam ! Clean residual mean=-0.000030 rms=0.000826 Jy/beam ! Combined flux in latest and established models = 0.190444 Jy ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 96 components and 0.190444 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.152872Jy sigma=0.000650 ! Fit after self-cal, rms=0.152874Jy sigma=0.000650 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.152874Jy sigma=0.000650 ! Fit after self-cal, rms=0.152223Jy sigma=0.000650 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=9.849 mas, bmaj=28.33 mas, bpa=1.372 degrees ! Estimated noise=1701.35 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000638144 Jy ! Component: 100 - total flux cleaned = 0.000618835 Jy ! Component: 150 - total flux cleaned = 0.000636078 Jy ! Component: 200 - total flux cleaned = 0.000619231 Jy ! Total flux subtracted in 200 components = 0.000619231 Jy ! Clean residual min=-0.002799 max=0.002965 Jy/beam ! Clean residual mean=-0.000058 rms=0.000895 Jy/beam ! Combined flux in latest and established models = 0.191064 Jy selfcal ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 104 components and 0.191064 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.152212Jy sigma=0.000650 ! Fit after self-cal, rms=0.152213Jy sigma=0.000650 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 9.0179e-05 Jy ! Component: 100 - total flux cleaned = 7.50075e-05 Jy ! Component: 150 - total flux cleaned = 5.9517e-05 Jy ! Component: 200 - total flux cleaned = 4.37485e-05 Jy ! Total flux subtracted in 200 components = 4.37485e-05 Jy ! Clean residual min=-0.002808 max=0.002897 Jy/beam ! Clean residual mean=-0.000057 rms=0.000895 Jy/beam ! Combined flux in latest and established models = 0.191107 Jy ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 108 components and 0.191107 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.152213Jy sigma=0.000650 ! Fit after self-cal, rms=0.152215Jy sigma=0.000650 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.231 mas, bmaj=9.821 mas, bpa=3.321 degrees ! Estimated noise=1376.03 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.231 x 9.821 at 3.321 degrees (North through East) ! Clean map min=-0.0031201 max=0.13238 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.612 mas, bmaj=8.585 mas, bpa=4.741 degrees ! Estimated noise=2051.35 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.100111 Jy ! Component: 100 - total flux cleaned = 0.138553 Jy ! Component: 150 - total flux cleaned = 0.15881 Jy ! Component: 200 - total flux cleaned = 0.170346 Jy ! Total flux subtracted in 200 components = 0.170346 Jy ! Clean residual min=-0.006581 max=0.006935 Jy/beam ! Clean residual mean=-0.000084 rms=0.001781 Jy/beam ! Combined flux in latest and established models = 0.170346 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 45 model components to the UV plane model. ! The established model now contains 45 components and 0.170346 Jy ! Inverting map and beam ! Estimated beam: bmin=3.231 mas, bmaj=9.821 mas, bpa=3.321 degrees ! Estimated noise=1376.03 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.010109 Jy ! Component: 100 - total flux cleaned = 0.0150385 Jy ! Component: 150 - total flux cleaned = 0.0179241 Jy ! Component: 200 - total flux cleaned = 0.0186765 Jy ! Total flux subtracted in 200 components = 0.0186765 Jy ! Clean residual min=-0.003608 max=0.003034 Jy/beam ! Clean residual mean=-0.000042 rms=0.000871 Jy/beam ! Combined flux in latest and established models = 0.189022 Jy ! Adding 30 model components to the UV plane model. ! The established model now contains 70 components and 0.189022 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=9.849 mas, bmaj=28.33 mas, bpa=1.372 degrees ! Estimated noise=1701.35 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00137472 Jy ! Component: 100 - total flux cleaned = 0.0015419 Jy ! Component: 150 - total flux cleaned = 0.0016484 Jy ! Component: 200 - total flux cleaned = 0.00169564 Jy ! Total flux subtracted in 200 components = 0.00169564 Jy ! Clean residual min=-0.002901 max=0.003041 Jy/beam ! Clean residual mean=-0.000061 rms=0.000920 Jy/beam ! Combined flux in latest and established models = 0.190718 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -6.21855e-07 Jy ! Component: 100 - total flux cleaned = -4.09787e-05 Jy ! Component: 150 - total flux cleaned = -6.00649e-05 Jy ! Component: 200 - total flux cleaned = -7.83047e-05 Jy ! Total flux subtracted in 200 components = -7.83047e-05 Jy ! Clean residual min=-0.002904 max=0.003051 Jy/beam ! Clean residual mean=-0.000061 rms=0.000916 Jy/beam ! Combined flux in latest and established models = 0.19064 Jy ! Adding 20 model components to the UV plane model. ! The established model now contains 85 components and 0.19064 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.231 mas, bmaj=9.821 mas, bpa=3.321 degrees ! Estimated noise=1376.03 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000310015 Jy ! Component: 100 - total flux cleaned = -0.000352986 Jy ! Component: 150 - total flux cleaned = -0.000280315 Jy ! Component: 200 - total flux cleaned = -0.000350318 Jy ! Total flux subtracted in 200 components = -0.000350318 Jy ! Clean residual min=-0.003554 max=0.003068 Jy/beam ! Clean residual mean=-0.000036 rms=0.000844 Jy/beam ! Combined flux in latest and established models = 0.190289 Jy selfcal ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 95 components and 0.190289 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.152246Jy sigma=0.000650 ! Fit after self-cal, rms=0.152252Jy sigma=0.000650 wmodel J1624-3213_S_2017_07_09_pus_map.mod ! Writing 95 model components to file: J1624-3213_S_2017_07_09_pus_map.mod wobs J1624-3213_S_2017_07_09_pus_uvs.fits ! Writing UV FITS file: J1624-3213_S_2017_07_09_pus_uvs.fits wwins J1624-3213_S_2017_07_09_pus_map.win ! wwins: Wrote 2 windows to J1624-3213_S_2017_07_09_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.00102334 Jy ! Component: 100 - total flux cleaned = -0.000969777 Jy ! Component: 150 - total flux cleaned = -0.000969825 Jy ! Component: 200 - total flux cleaned = -0.00111297 Jy ! Component: 250 - total flux cleaned = -0.000976837 Jy ! Component: 300 - total flux cleaned = -0.000845767 Jy ! Component: 350 - total flux cleaned = -0.000760282 Jy ! Component: 400 - total flux cleaned = -0.000636232 Jy ! Component: 450 - total flux cleaned = -0.000635752 Jy ! Component: 500 - total flux cleaned = -0.000518609 Jy ! Component: 550 - total flux cleaned = -0.000367016 Jy ! Component: 600 - total flux cleaned = -0.000330347 Jy ! Component: 650 - total flux cleaned = -0.000257974 Jy ! Component: 700 - total flux cleaned = -0.000257938 Jy ! Component: 750 - total flux cleaned = -0.000189534 Jy ! Component: 800 - total flux cleaned = -0.000256424 Jy ! Component: 850 - total flux cleaned = -0.000191131 Jy ! Component: 900 - total flux cleaned = -0.000127596 Jy ! Component: 950 - total flux cleaned = -0.000128048 Jy ! Component: 1000 - total flux cleaned = -0.000128345 Jy ! Component: 1050 - total flux cleaned = -9.75313e-05 Jy ! Component: 1100 - total flux cleaned = -3.74802e-05 Jy ! Component: 1150 - total flux cleaned = 2.16109e-05 Jy ! Component: 1200 - total flux cleaned = 7.97859e-05 Jy ! Component: 1250 - total flux cleaned = 5.13655e-05 Jy ! Component: 1300 - total flux cleaned = 0.000136477 Jy ! Component: 1350 - total flux cleaned = 5.32949e-05 Jy ! Component: 1400 - total flux cleaned = 8.13383e-05 Jy ! Component: 1450 - total flux cleaned = 8.11776e-05 Jy ! Component: 1500 - total flux cleaned = 2.76022e-05 Jy ! Component: 1550 - total flux cleaned = 6.30335e-07 Jy ! Component: 1600 - total flux cleaned = -7.72251e-05 Jy ! Component: 1650 - total flux cleaned = -0.000128616 Jy ! Component: 1700 - total flux cleaned = -0.000153562 Jy ! Component: 1750 - total flux cleaned = -0.000128381 Jy ! Component: 1800 - total flux cleaned = -0.000104126 Jy ! Component: 1850 - total flux cleaned = -0.000104561 Jy ! Component: 1900 - total flux cleaned = -0.000225116 Jy ! Component: 1950 - total flux cleaned = -0.000272316 Jy ! Component: 2000 - total flux cleaned = -0.000295815 Jy ! Component: 2050 - total flux cleaned = -0.000388588 Jy ! Component: 2100 - total flux cleaned = -0.000365505 Jy ! Component: 2150 - total flux cleaned = -0.000478889 Jy ! Component: 2200 - total flux cleaned = -0.000456435 Jy ! Component: 2250 - total flux cleaned = -0.000567162 Jy ! Component: 2300 - total flux cleaned = -0.000632674 Jy ! Component: 2350 - total flux cleaned = -0.000675673 Jy ! Component: 2400 - total flux cleaned = -0.000718571 Jy ! Component: 2450 - total flux cleaned = -0.000824538 Jy ! Component: 2500 - total flux cleaned = -0.000866375 Jy ! Component: 2550 - total flux cleaned = -0.000970512 Jy ! Component: 2600 - total flux cleaned = -0.00105295 Jy ! Component: 2650 - total flux cleaned = -0.00111389 Jy ! Component: 2700 - total flux cleaned = -0.0011339 Jy ! Component: 2750 - total flux cleaned = -0.00121406 Jy ! Component: 2800 - total flux cleaned = -0.0013137 Jy ! Component: 2850 - total flux cleaned = -0.00139275 Jy ! Component: 2900 - total flux cleaned = -0.00151014 Jy ! Component: 2950 - total flux cleaned = -0.00164573 Jy ! Component: 3000 - total flux cleaned = -0.001665 Jy ! Component: 3050 - total flux cleaned = -0.00172249 Jy ! Component: 3100 - total flux cleaned = -0.00181765 Jy ! Component: 3150 - total flux cleaned = -0.0018931 Jy ! Component: 3200 - total flux cleaned = -0.00194928 Jy ! Component: 3250 - total flux cleaned = -0.00207974 Jy ! Component: 3300 - total flux cleaned = -0.00211694 Jy ! Component: 3350 - total flux cleaned = -0.00220908 Jy ! Component: 3400 - total flux cleaned = -0.00222758 Jy ! Component: 3450 - total flux cleaned = -0.0023187 Jy ! Component: 3500 - total flux cleaned = -0.00235477 Jy ! Component: 3550 - total flux cleaned = -0.00240884 Jy ! Component: 3600 - total flux cleaned = -0.00246247 Jy ! Component: 3650 - total flux cleaned = -0.00249806 Jy ! Component: 3700 - total flux cleaned = -0.00251569 Jy ! Component: 3750 - total flux cleaned = -0.00256835 Jy ! Component: 3800 - total flux cleaned = -0.00262091 Jy ! Component: 3850 - total flux cleaned = -0.00272537 Jy ! Component: 3900 - total flux cleaned = -0.00276016 Jy ! Component: 3950 - total flux cleaned = -0.00284644 Jy ! Component: 4000 - total flux cleaned = -0.00291523 Jy ! Component: 4050 - total flux cleaned = -0.00301799 Jy ! Total flux subtracted in 4096 components = -0.00308617 Jy ! Clean residual min=-0.000997 max=0.000852 Jy/beam ! Clean residual mean=-0.000022 rms=0.000319 Jy/beam ! Combined flux in latest and established models = 0.187203 Jy keep ! Adding 232 model components to the UV plane model. ! The established model now contains 327 components and 0.187203 Jy ![Exited script file: muppet] wmap "J1624-3213_S_2017_07_09_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.231 x 9.821 at 3.321 degrees (North through East) ! Clean map min=-0.0025515 max=0.13526 Jy/beam ! Writing clean map to FITS file: J1624-3213_S_2017_07_09_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.135264 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000309272 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.685929 0.685929 1.37186 2.74371 5.48743 10.9749 21.9497 43.8994 87.7989 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0009 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.135 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.231 x 9.821 at 3.321 degrees (North through East) ! Clean map min=-0.0025515 max=0.13526 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J1624-3213_S_2017_07_09_pus_uvs.log closed on Wed May 8 14:52:59 2019