! Started logfile: J1623+0115_S_2017_04_28_pus_uvs.log on Thu May 2 16:29:21 2019 obs J1623+0115_S_2017_04_28_pus_uva.fits ! Reading UV FITS file: J1623+0115_S_2017_04_28_pus_uva.fits ! AN table 1: 114 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.807018 visibilities/baseline/integration-bin. ! Found source: J1623+0115 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 671 lines of history. ! ! Reading 16560 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J1623+0115_S_2017_04_28_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 118 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 165 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 128 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 593 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.955033Jy sigma=0.032561 ! Fit after self-cal, rms=0.934286Jy sigma=0.032499 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.953 mas, bmaj=7.85 mas, bpa=-8.58 degrees ! Estimated noise=785.692 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0354449 Jy ! Component: 100 - total flux cleaned = 0.047459 Jy ! Total flux subtracted in 100 components = 0.047459 Jy ! Clean residual min=-0.011006 max=0.010885 Jy/beam ! Clean residual mean=-0.000022 rms=0.003633 Jy/beam ! Combined flux in latest and established models = 0.047459 Jy ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 9 components and 0.047459 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.095776Jy sigma=0.001523 ! Fit after self-cal, rms=0.095649Jy sigma=0.001518 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=4.011 mas, bmaj=8.94 mas, bpa=-3.533 degrees ! Estimated noise=529.859 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.004581 Jy ! Component: 100 - total flux cleaned = 0.00417584 Jy ! Component: 150 - total flux cleaned = 0.0038568 Jy ! Component: 200 - total flux cleaned = 0.00368082 Jy ! Total flux subtracted in 200 components = 0.00368082 Jy ! Clean residual min=-0.013741 max=0.012353 Jy/beam ! Clean residual mean=-0.000197 rms=0.004399 Jy/beam ! Combined flux in latest and established models = 0.0511398 Jy ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 18 components and 0.0511398 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.093892Jy sigma=0.001651 ! Fit after self-cal, rms=0.093814Jy sigma=0.001651 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.78 FD 0.76 HN 1.25 KP 0.75 ! LA 0.76 MK 0.80 NL 0.87 OV 0.77 ! PT 0.77 SC 1.02 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 0.83 FD 0.71 HN 1.15 KP 0.76 ! LA 0.72 MK 0.78 NL 1.00 OV 0.82 ! PT 0.75 SC 1.11 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 0.84 FD 0.75 HN 1.23 KP 0.81 ! LA 0.76 MK 0.80 NL 0.91 OV 0.74 ! PT 0.79 SC 1.02 ! ! ! Correcting IF 4. ! A total of 15 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.21 FD 1.58 HN 1.07 KP 1.00* ! LA 15.26 MK 0.62 NL 1.00* OV 1.00* ! PT 1.23 SC 1.00* ! ! ! Fit before self-cal, rms=0.093814Jy sigma=0.001651 ! Fit after self-cal, rms=0.536173Jy sigma=0.000676 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.925 mas, bmaj=8.576 mas, bpa=-2.176 degrees ! Estimated noise=536.553 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-4.5, -4). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0040177 Jy ! Component: 100 - total flux cleaned = 0.00536171 Jy ! Component: 150 - total flux cleaned = 0.00591093 Jy ! Component: 200 - total flux cleaned = 0.0060827 Jy ! Total flux subtracted in 200 components = 0.0060827 Jy ! Clean residual min=-0.002415 max=0.002377 Jy/beam ! Clean residual mean=-0.000027 rms=0.000582 Jy/beam ! Combined flux in latest and established models = 0.0572225 Jy ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 30 components and 0.0572225 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.535911Jy sigma=0.000674 ! Fit after self-cal, rms=0.536374Jy sigma=0.000671 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.536374Jy sigma=0.000671 ! Fit after self-cal, rms=0.934024Jy sigma=0.000663 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.9 mas, bmaj=8.466 mas, bpa=-2.188 degrees ! Estimated noise=540.088 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00261813 Jy ! Component: 100 - total flux cleaned = 0.00388378 Jy ! Component: 150 - total flux cleaned = 0.00407121 Jy ! Component: 200 - total flux cleaned = 0.00416845 Jy ! Total flux subtracted in 200 components = 0.00416845 Jy ! Clean residual min=-0.001597 max=0.002181 Jy/beam ! Clean residual mean=-0.000025 rms=0.000446 Jy/beam ! Combined flux in latest and established models = 0.061391 Jy selfcal ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 39 components and 0.061391 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.933870Jy sigma=0.000662 ! Fit after self-cal, rms=0.933947Jy sigma=0.000660 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-127, 74). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00200851 Jy ! Component: 100 - total flux cleaned = 0.00271154 Jy ! Component: 150 - total flux cleaned = 0.00275383 Jy ! Component: 200 - total flux cleaned = 0.00272262 Jy ! Total flux subtracted in 200 components = 0.00272262 Jy ! Clean residual min=-0.001607 max=0.001667 Jy/beam ! Clean residual mean=-0.000020 rms=0.000425 Jy/beam ! Combined flux in latest and established models = 0.0641136 Jy ! Performing phase self-cal ! Adding 22 model components to the UV plane model. ! The established model now contains 54 components and 0.0641136 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.933830Jy sigma=0.000660 ! Fit after self-cal, rms=0.933880Jy sigma=0.000660 ! Inverting map ! Added new window around map position (-11.5, -19.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00164619 Jy ! Component: 100 - total flux cleaned = 0.00189869 Jy ! Component: 150 - total flux cleaned = 0.00186312 Jy ! Component: 200 - total flux cleaned = 0.00186212 Jy ! Total flux subtracted in 200 components = 0.00186212 Jy ! Clean residual min=-0.001564 max=0.001505 Jy/beam ! Clean residual mean=-0.000018 rms=0.000408 Jy/beam ! Combined flux in latest and established models = 0.0659757 Jy ! Performing phase self-cal ! Adding 25 model components to the UV plane model. ! The established model now contains 70 components and 0.0659757 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.933818Jy sigma=0.000659 ! Fit after self-cal, rms=0.933832Jy sigma=0.000659 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.933832Jy sigma=0.000659 ! Fit after self-cal, rms=0.074439Jy sigma=0.000656 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.887 mas, bmaj=8.426 mas, bpa=-1.916 degrees ! Estimated noise=540.44 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00138211 Jy ! Component: 100 - total flux cleaned = 0.00180683 Jy ! Component: 150 - total flux cleaned = 0.00183244 Jy ! Component: 200 - total flux cleaned = 0.00178779 Jy ! Total flux subtracted in 200 components = 0.00178779 Jy ! Clean residual min=-0.001263 max=0.001205 Jy/beam ! Clean residual mean=-0.000005 rms=0.000332 Jy/beam ! Combined flux in latest and established models = 0.0677635 Jy selfcal ! Performing phase self-cal ! Adding 25 model components to the UV plane model. ! The established model now contains 88 components and 0.0677635 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.074380Jy sigma=0.000655 ! Fit after self-cal, rms=0.074211Jy sigma=0.000655 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000696 Jy ! Component: 100 - total flux cleaned = 0.000748774 Jy ! Component: 150 - total flux cleaned = 0.000725649 Jy ! Component: 200 - total flux cleaned = 0.000684725 Jy ! Total flux subtracted in 200 components = 0.000684725 Jy ! Clean residual min=-0.001363 max=0.001211 Jy/beam ! Clean residual mean=-0.000006 rms=0.000332 Jy/beam ! Combined flux in latest and established models = 0.0684482 Jy ! Performing phase self-cal ! Adding 28 model components to the UV plane model. ! The established model now contains 99 components and 0.0684482 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.074181Jy sigma=0.000654 ! Fit after self-cal, rms=0.074166Jy sigma=0.000654 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.074166Jy sigma=0.000654 ! Fit after self-cal, rms=0.074343Jy sigma=0.000654 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.11 mas, bmaj=12.53 mas, bpa=6.153 degrees ! Estimated noise=612.02 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000889836 Jy ! Component: 100 - total flux cleaned = 0.0013816 Jy ! Component: 150 - total flux cleaned = 0.00165447 Jy ! Component: 200 - total flux cleaned = 0.0016878 Jy ! Total flux subtracted in 200 components = 0.0016878 Jy ! Clean residual min=-0.001280 max=0.001288 Jy/beam ! Clean residual mean=-0.000005 rms=0.000357 Jy/beam ! Combined flux in latest and established models = 0.070136 Jy selfcal ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 115 components and 0.070136 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.074311Jy sigma=0.000654 ! Fit after self-cal, rms=0.074277Jy sigma=0.000654 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000309319 Jy ! Component: 100 - total flux cleaned = 0.000348771 Jy ! Component: 150 - total flux cleaned = 0.00034902 Jy ! Component: 200 - total flux cleaned = 0.000369093 Jy ! Total flux subtracted in 200 components = 0.000369093 Jy ! Clean residual min=-0.001269 max=0.001313 Jy/beam ! Clean residual mean=-0.000005 rms=0.000356 Jy/beam ! Combined flux in latest and established models = 0.0705051 Jy ! Performing phase self-cal ! Adding 26 model components to the UV plane model. ! The established model now contains 128 components and 0.0705051 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.074265Jy sigma=0.000654 ! Fit after self-cal, rms=0.074259Jy sigma=0.000654 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.88 mas, bmaj=8.415 mas, bpa=-1.847 degrees ! Estimated noise=542.907 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.88 x 8.415 at -1.847 degrees (North through East) ! Clean map min=-0.0012612 max=0.046582 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.974 mas, bmaj=7.349 mas, bpa=-6.646 degrees ! Estimated noise=790.374 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0360398 Jy ! Component: 100 - total flux cleaned = 0.049343 Jy ! Component: 150 - total flux cleaned = 0.0567116 Jy ! Component: 200 - total flux cleaned = 0.0615474 Jy ! Total flux subtracted in 200 components = 0.0615474 Jy ! Clean residual min=-0.002547 max=0.002867 Jy/beam ! Clean residual mean=-0.000002 rms=0.000602 Jy/beam ! Combined flux in latest and established models = 0.0615474 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 20 model components to the UV plane model. ! The established model now contains 20 components and 0.0615474 Jy ! Inverting map and beam ! Estimated beam: bmin=3.88 mas, bmaj=8.415 mas, bpa=-1.847 degrees ! Estimated noise=542.907 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00385657 Jy ! Component: 100 - total flux cleaned = 0.00618622 Jy ! Component: 150 - total flux cleaned = 0.00682907 Jy ! Component: 200 - total flux cleaned = 0.0071808 Jy ! Total flux subtracted in 200 components = 0.0071808 Jy ! Clean residual min=-0.001532 max=0.001357 Jy/beam ! Clean residual mean=-0.000007 rms=0.000399 Jy/beam ! Combined flux in latest and established models = 0.0687282 Jy ! Adding 29 model components to the UV plane model. ! The established model now contains 42 components and 0.0687281 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.11 mas, bmaj=12.53 mas, bpa=6.153 degrees ! Estimated noise=612.02 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00121173 Jy ! Component: 100 - total flux cleaned = 0.00138553 Jy ! Component: 150 - total flux cleaned = 0.00141669 Jy ! Component: 200 - total flux cleaned = 0.00141662 Jy ! Total flux subtracted in 200 components = 0.00141662 Jy ! Clean residual min=-0.001275 max=0.001258 Jy/beam ! Clean residual mean=-0.000007 rms=0.000367 Jy/beam ! Combined flux in latest and established models = 0.0701448 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -2.78815e-05 Jy ! Component: 100 - total flux cleaned = -2.80224e-05 Jy ! Component: 150 - total flux cleaned = -2.85371e-05 Jy ! Component: 200 - total flux cleaned = -2.86126e-05 Jy ! Total flux subtracted in 200 components = -2.86126e-05 Jy ! Clean residual min=-0.001295 max=0.001205 Jy/beam ! Clean residual mean=-0.000006 rms=0.000359 Jy/beam ! Combined flux in latest and established models = 0.0701161 Jy ! Adding 61 model components to the UV plane model. ! The established model now contains 98 components and 0.0701161 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.88 mas, bmaj=8.415 mas, bpa=-1.847 degrees ! Estimated noise=542.907 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000209848 Jy ! Component: 100 - total flux cleaned = 0.00011088 Jy ! Component: 150 - total flux cleaned = 0.000110476 Jy ! Component: 200 - total flux cleaned = 0.000217028 Jy ! Total flux subtracted in 200 components = 0.000217028 Jy ! Clean residual min=-0.001330 max=0.001242 Jy/beam ! Clean residual mean=-0.000003 rms=0.000340 Jy/beam ! Combined flux in latest and established models = 0.0703332 Jy selfcal ! Performing phase self-cal ! Adding 23 model components to the UV plane model. ! The established model now contains 117 components and 0.0703332 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.074357Jy sigma=0.000654 ! Fit after self-cal, rms=0.074411Jy sigma=0.000654 wmodel J1623+0115_S_2017_04_28_pus_map.mod ! Writing 117 model components to file: J1623+0115_S_2017_04_28_pus_map.mod wobs J1623+0115_S_2017_04_28_pus_uvs.fits ! Writing UV FITS file: J1623+0115_S_2017_04_28_pus_uvs.fits wwins J1623+0115_S_2017_04_28_pus_map.win ! wwins: Wrote 4 windows to J1623+0115_S_2017_04_28_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.000560299 Jy ! Component: 100 - total flux cleaned = -0.000879556 Jy ! Component: 150 - total flux cleaned = -0.00114142 Jy ! Component: 200 - total flux cleaned = -0.00145671 Jy ! Component: 250 - total flux cleaned = -0.00174278 Jy ! Component: 300 - total flux cleaned = -0.00204054 Jy ! Component: 350 - total flux cleaned = -0.00223427 Jy ! Component: 400 - total flux cleaned = -0.00249886 Jy ! Component: 450 - total flux cleaned = -0.00268369 Jy ! Component: 500 - total flux cleaned = -0.00281067 Jy ! Component: 550 - total flux cleaned = -0.00293542 Jy ! Component: 600 - total flux cleaned = -0.00304052 Jy ! Component: 650 - total flux cleaned = -0.0031265 Jy ! Component: 700 - total flux cleaned = -0.00321122 Jy ! Component: 750 - total flux cleaned = -0.00334411 Jy ! Component: 800 - total flux cleaned = -0.0034095 Jy ! Component: 850 - total flux cleaned = -0.00353857 Jy ! Component: 900 - total flux cleaned = -0.00361797 Jy ! Component: 950 - total flux cleaned = -0.00368096 Jy ! Component: 1000 - total flux cleaned = -0.0037435 Jy ! Component: 1050 - total flux cleaned = -0.00383563 Jy ! Component: 1100 - total flux cleaned = -0.00391156 Jy ! Component: 1150 - total flux cleaned = -0.00401648 Jy ! Component: 1200 - total flux cleaned = -0.00411981 Jy ! Component: 1250 - total flux cleaned = -0.00425141 Jy ! Component: 1300 - total flux cleaned = -0.00433807 Jy ! Component: 1350 - total flux cleaned = -0.00443817 Jy ! Component: 1400 - total flux cleaned = -0.00452299 Jy ! Component: 1450 - total flux cleaned = -0.00464883 Jy ! Component: 1500 - total flux cleaned = -0.00475957 Jy ! Component: 1550 - total flux cleaned = -0.00484136 Jy ! Component: 1600 - total flux cleaned = -0.00496341 Jy ! Component: 1650 - total flux cleaned = -0.00501696 Jy ! Component: 1700 - total flux cleaned = -0.00511011 Jy ! Component: 1750 - total flux cleaned = -0.00521566 Jy ! Component: 1800 - total flux cleaned = -0.00529401 Jy ! Component: 1850 - total flux cleaned = -0.00535873 Jy ! Component: 1900 - total flux cleaned = -0.00546131 Jy ! Component: 1950 - total flux cleaned = -0.00556296 Jy ! Component: 2000 - total flux cleaned = -0.00566376 Jy ! Component: 2050 - total flux cleaned = -0.00577625 Jy ! Component: 2100 - total flux cleaned = -0.00590025 Jy ! Component: 2150 - total flux cleaned = -0.00591252 Jy ! Component: 2200 - total flux cleaned = -0.00602254 Jy ! Component: 2250 - total flux cleaned = -0.00611969 Jy ! Component: 2300 - total flux cleaned = -0.00623987 Jy ! Component: 2350 - total flux cleaned = -0.00628765 Jy ! Component: 2400 - total flux cleaned = -0.00633515 Jy ! Component: 2450 - total flux cleaned = -0.006441 Jy ! Component: 2500 - total flux cleaned = -0.00647614 Jy ! Component: 2550 - total flux cleaned = -0.00660362 Jy ! Component: 2600 - total flux cleaned = -0.00662646 Jy ! Component: 2650 - total flux cleaned = -0.00667219 Jy ! Component: 2700 - total flux cleaned = -0.00674034 Jy ! Component: 2750 - total flux cleaned = -0.00683045 Jy ! Component: 2800 - total flux cleaned = -0.00684181 Jy ! Component: 2850 - total flux cleaned = -0.00693078 Jy ! Component: 2900 - total flux cleaned = -0.00698592 Jy ! Component: 2950 - total flux cleaned = -0.00697499 Jy ! Component: 3000 - total flux cleaned = -0.00704048 Jy ! Component: 3050 - total flux cleaned = -0.00710554 Jy ! Component: 3100 - total flux cleaned = -0.00712699 Jy ! Component: 3150 - total flux cleaned = -0.00715908 Jy ! Component: 3200 - total flux cleaned = -0.00722274 Jy ! Component: 3250 - total flux cleaned = -0.00721222 Jy ! Component: 3300 - total flux cleaned = -0.00721232 Jy ! Component: 3350 - total flux cleaned = -0.00730587 Jy ! Component: 3400 - total flux cleaned = -0.00730592 Jy ! Component: 3450 - total flux cleaned = -0.00730594 Jy ! Component: 3500 - total flux cleaned = -0.00733667 Jy ! Component: 3550 - total flux cleaned = -0.0073571 Jy ! Component: 3600 - total flux cleaned = -0.00736714 Jy ! Component: 3650 - total flux cleaned = -0.00739715 Jy ! Component: 3700 - total flux cleaned = -0.00735727 Jy ! Component: 3750 - total flux cleaned = -0.00734738 Jy ! Component: 3800 - total flux cleaned = -0.00733744 Jy ! Component: 3850 - total flux cleaned = -0.00735708 Jy ! Component: 3900 - total flux cleaned = -0.0073668 Jy ! Component: 3950 - total flux cleaned = -0.00732803 Jy ! Component: 4000 - total flux cleaned = -0.00732794 Jy ! Component: 4050 - total flux cleaned = -0.00729921 Jy ! Total flux subtracted in 4096 components = -0.00730879 Jy ! Clean residual min=-0.000532 max=0.000593 Jy/beam ! Clean residual mean=-0.000000 rms=0.000174 Jy/beam ! Combined flux in latest and established models = 0.0630244 Jy keep ! Adding 270 model components to the UV plane model. ! The established model now contains 387 components and 0.0630244 Jy ![Exited script file: muppet] wmap "J1623+0115_S_2017_04_28_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.88 x 8.415 at -1.847 degrees (North through East) ! Clean map min=-0.0011251 max=0.045279 Jy/beam ! Writing clean map to FITS file: J1623+0115_S_2017_04_28_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.0452793 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000174109 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -1.15357 1.15357 2.30714 4.61427 9.22855 18.4571 36.9142 73.8284 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0005 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.045 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.88 x 8.415 at -1.847 degrees (North through East) ! Clean map min=-0.0011251 max=0.045279 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J1623+0115_S_2017_04_28_pus_uvs.log closed on Thu May 2 16:29:26 2019