! Started logfile: J1617-2537_S_2017_02_24_pus_uvs.log on Sat May 4 11:30:32 2019 obs J1617-2537_S_2017_02_24_pus_uva.fits ! Reading UV FITS file: J1617-2537_S_2017_02_24_pus_uva.fits ! AN table 1: 75 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.970074 visibilities/baseline/integration-bin. ! Found source: J1617-2537 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 823 lines of history. ! ! Reading 13096 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J1617-2537_S_2017_02_24_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 13 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 13 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 13 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 240 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.893566Jy sigma=0.006133 ! Fit after self-cal, rms=0.884018Jy sigma=0.006073 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.504 mas, bmaj=6.903 mas, bpa=-7.41 degrees ! Estimated noise=1657.55 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0921175 Jy ! Component: 100 - total flux cleaned = 0.112274 Jy ! Total flux subtracted in 100 components = 0.112274 Jy ! Clean residual min=-0.004846 max=0.006954 Jy/beam ! Clean residual mean=-0.000001 rms=0.001262 Jy/beam ! Combined flux in latest and established models = 0.112274 Jy ! Performing phase self-cal ! Adding 5 model components to the UV plane model. ! The established model now contains 5 components and 0.112274 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.120432Jy sigma=0.000679 ! Fit after self-cal, rms=0.120436Jy sigma=0.000679 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.104 mas, bmaj=8.113 mas, bpa=-6.859 degrees ! Estimated noise=985.312 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0105112 Jy ! Component: 100 - total flux cleaned = 0.0158363 Jy ! Component: 150 - total flux cleaned = 0.0187667 Jy ! Component: 200 - total flux cleaned = 0.0204208 Jy ! Total flux subtracted in 200 components = 0.0204208 Jy ! Clean residual min=-0.004428 max=0.004591 Jy/beam ! Clean residual mean=-0.000010 rms=0.000933 Jy/beam ! Combined flux in latest and established models = 0.132694 Jy ! Performing phase self-cal ! Adding 22 model components to the UV plane model. ! The established model now contains 27 components and 0.132694 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.119234Jy sigma=0.000672 ! Fit after self-cal, rms=0.119272Jy sigma=0.000672 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.95 FD 1.02 HN 1.16 KP 0.97 ! LA 0.93 MK 1.00 NL 1.02 OV 1.05 ! PT 1.02 SC 0.95 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.03 FD 0.99 HN 1.19 KP 0.89 ! LA 0.92 MK 0.95 NL 1.02 OV 1.04 ! PT 0.99 SC 1.00 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 1.07 FD 0.97 HN 1.08 KP 1.02 ! LA 1.04 MK 1.02 NL 1.06 OV 0.96 ! PT 0.97 SC 0.99 ! ! ! Correcting IF 4. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.03 FD 1.01 HN 1.01 KP 1.00* ! LA 0.75 MK 1.09 NL 1.00* OV 1.02 ! PT 1.04 SC 1.00* ! ! ! Fit before self-cal, rms=0.119272Jy sigma=0.000672 ! Fit after self-cal, rms=0.114094Jy sigma=0.000669 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.115 mas, bmaj=8.092 mas, bpa=-6.527 degrees ! Estimated noise=990.149 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000885163 Jy ! Component: 100 - total flux cleaned = 0.000948998 Jy ! Component: 150 - total flux cleaned = 0.000925813 Jy ! Component: 200 - total flux cleaned = 0.000885483 Jy ! Total flux subtracted in 200 components = 0.000885483 Jy ! Clean residual min=-0.003188 max=0.002945 Jy/beam ! Clean residual mean=0.000000 rms=0.000757 Jy/beam ! Combined flux in latest and established models = 0.13358 Jy ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 34 components and 0.13358 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.114066Jy sigma=0.000669 ! Fit after self-cal, rms=0.114087Jy sigma=0.000669 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.114087Jy sigma=0.000669 ! Fit after self-cal, rms=0.113836Jy sigma=0.000667 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.107 mas, bmaj=8.074 mas, bpa=-6.455 degrees ! Estimated noise=997.577 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00126899 Jy ! Component: 100 - total flux cleaned = 0.00150504 Jy ! Component: 150 - total flux cleaned = 0.001575 Jy ! Component: 200 - total flux cleaned = 0.0015893 Jy ! Total flux subtracted in 200 components = 0.0015893 Jy ! Clean residual min=-0.003080 max=0.003237 Jy/beam ! Clean residual mean=-0.000003 rms=0.000708 Jy/beam ! Combined flux in latest and established models = 0.135169 Jy selfcal ! Performing phase self-cal ! Adding 8 model components to the UV plane model. ! The established model now contains 37 components and 0.135169 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.113806Jy sigma=0.000667 ! Fit after self-cal, rms=0.113814Jy sigma=0.000667 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-10, 64.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00211634 Jy ! Component: 100 - total flux cleaned = 0.00205255 Jy ! Component: 150 - total flux cleaned = 0.00199823 Jy ! Component: 200 - total flux cleaned = 0.00189953 Jy ! Total flux subtracted in 200 components = 0.00189953 Jy ! Clean residual min=-0.002924 max=0.002510 Jy/beam ! Clean residual mean=-0.000002 rms=0.000671 Jy/beam ! Combined flux in latest and established models = 0.137069 Jy ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 56 components and 0.137069 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.113694Jy sigma=0.000667 ! Fit after self-cal, rms=0.113679Jy sigma=0.000667 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.113679Jy sigma=0.000667 ! Fit after self-cal, rms=0.109089Jy sigma=0.000665 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.108 mas, bmaj=8.078 mas, bpa=-6.486 degrees ! Estimated noise=996.648 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000495368 Jy ! Component: 100 - total flux cleaned = -0.000654244 Jy ! Component: 150 - total flux cleaned = -0.00079082 Jy ! Component: 200 - total flux cleaned = -0.000821253 Jy ! Total flux subtracted in 200 components = -0.000821253 Jy ! Clean residual min=-0.002479 max=0.002461 Jy/beam ! Clean residual mean=-0.000006 rms=0.000590 Jy/beam ! Combined flux in latest and established models = 0.136248 Jy selfcal ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 65 components and 0.136248 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.109062Jy sigma=0.000665 ! Fit after self-cal, rms=0.109036Jy sigma=0.000664 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -9.36909e-05 Jy ! Component: 100 - total flux cleaned = -0.000119996 Jy ! Component: 150 - total flux cleaned = -0.000119509 Jy ! Component: 200 - total flux cleaned = -0.000118389 Jy ! Total flux subtracted in 200 components = -0.000118389 Jy ! Clean residual min=-0.002463 max=0.002432 Jy/beam ! Clean residual mean=-0.000006 rms=0.000584 Jy/beam ! Combined flux in latest and established models = 0.136129 Jy ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 68 components and 0.136129 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.109024Jy sigma=0.000664 ! Fit after self-cal, rms=0.109022Jy sigma=0.000664 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.109022Jy sigma=0.000664 ! Fit after self-cal, rms=0.109221Jy sigma=0.000664 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.934 mas, bmaj=18.76 mas, bpa=-0.2521 degrees ! Estimated noise=1244.27 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000340275 Jy ! Component: 100 - total flux cleaned = -0.000363272 Jy ! Component: 150 - total flux cleaned = -0.000404157 Jy ! Component: 200 - total flux cleaned = -0.00043995 Jy ! Total flux subtracted in 200 components = -0.00043995 Jy ! Clean residual min=-0.002984 max=0.002331 Jy/beam ! Clean residual mean=-0.000013 rms=0.000678 Jy/beam ! Combined flux in latest and established models = 0.135689 Jy selfcal ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 75 components and 0.135689 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.109218Jy sigma=0.000664 ! Fit after self-cal, rms=0.109219Jy sigma=0.000664 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -8.35493e-05 Jy ! Component: 100 - total flux cleaned = -0.000155227 Jy ! Component: 150 - total flux cleaned = -0.000186012 Jy ! Component: 200 - total flux cleaned = -0.000199392 Jy ! Total flux subtracted in 200 components = -0.000199392 Jy ! Clean residual min=-0.002976 max=0.002318 Jy/beam ! Clean residual mean=-0.000013 rms=0.000673 Jy/beam ! Combined flux in latest and established models = 0.13549 Jy ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 77 components and 0.13549 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.109220Jy sigma=0.000664 ! Fit after self-cal, rms=0.109219Jy sigma=0.000664 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.108 mas, bmaj=8.079 mas, bpa=-6.515 degrees ! Estimated noise=997.604 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.108 x 8.079 at -6.515 degrees (North through East) ! Clean map min=-0.0027511 max=0.12004 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.495 mas, bmaj=6.861 mas, bpa=-7.049 degrees ! Estimated noise=1687.62 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0936115 Jy ! Component: 100 - total flux cleaned = 0.114407 Jy ! Component: 150 - total flux cleaned = 0.121899 Jy ! Component: 200 - total flux cleaned = 0.126688 Jy ! Total flux subtracted in 200 components = 0.126688 Jy ! Clean residual min=-0.004066 max=0.004172 Jy/beam ! Clean residual mean=-0.000001 rms=0.001029 Jy/beam ! Combined flux in latest and established models = 0.126688 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 35 model components to the UV plane model. ! The established model now contains 35 components and 0.126688 Jy ! Inverting map and beam ! Estimated beam: bmin=3.108 mas, bmaj=8.079 mas, bpa=-6.515 degrees ! Estimated noise=997.604 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-1, 7). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00524355 Jy ! Component: 100 - total flux cleaned = 0.00791499 Jy ! Component: 150 - total flux cleaned = 0.00841776 Jy ! Component: 200 - total flux cleaned = 0.00870128 Jy ! Total flux subtracted in 200 components = 0.00870128 Jy ! Clean residual min=-0.002715 max=0.002490 Jy/beam ! Clean residual mean=-0.000005 rms=0.000619 Jy/beam ! Combined flux in latest and established models = 0.135389 Jy ! Adding 40 model components to the UV plane model. ! The established model now contains 71 components and 0.135389 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.934 mas, bmaj=18.76 mas, bpa=-0.2521 degrees ! Estimated noise=1244.27 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00103611 Jy ! Component: 100 - total flux cleaned = 0.00103144 Jy ! Component: 150 - total flux cleaned = 0.00110344 Jy ! Component: 200 - total flux cleaned = 0.0011935 Jy ! Total flux subtracted in 200 components = 0.0011935 Jy ! Clean residual min=-0.002977 max=0.002269 Jy/beam ! Clean residual mean=-0.000011 rms=0.000673 Jy/beam ! Combined flux in latest and established models = 0.136583 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 7.52061e-05 Jy ! Component: 100 - total flux cleaned = 7.46303e-05 Jy ! Component: 150 - total flux cleaned = 7.50218e-05 Jy ! Component: 200 - total flux cleaned = 7.55202e-05 Jy ! Total flux subtracted in 200 components = 7.55202e-05 Jy ! Clean residual min=-0.002944 max=0.002252 Jy/beam ! Clean residual mean=-0.000012 rms=0.000667 Jy/beam ! Combined flux in latest and established models = 0.136658 Jy ! Adding 30 model components to the UV plane model. ! The established model now contains 97 components and 0.136658 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.108 mas, bmaj=8.079 mas, bpa=-6.515 degrees ! Estimated noise=997.604 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 2.64863e-05 Jy ! Component: 100 - total flux cleaned = -1.66368e-05 Jy ! Component: 150 - total flux cleaned = -1.70752e-05 Jy ! Component: 200 - total flux cleaned = -5.37431e-05 Jy ! Total flux subtracted in 200 components = -5.37431e-05 Jy ! Clean residual min=-0.002449 max=0.002433 Jy/beam ! Clean residual mean=-0.000006 rms=0.000579 Jy/beam ! Combined flux in latest and established models = 0.136605 Jy selfcal ! Performing phase self-cal ! Adding 28 model components to the UV plane model. ! The established model now contains 123 components and 0.136605 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.109213Jy sigma=0.000664 ! Fit after self-cal, rms=0.109196Jy sigma=0.000664 wmodel J1617-2537_S_2017_02_24_pus_map.mod ! Writing 123 model components to file: J1617-2537_S_2017_02_24_pus_map.mod wobs J1617-2537_S_2017_02_24_pus_uvs.fits ! Writing UV FITS file: J1617-2537_S_2017_02_24_pus_uvs.fits wwins J1617-2537_S_2017_02_24_pus_map.win ! wwins: Wrote 3 windows to J1617-2537_S_2017_02_24_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.000315596 Jy ! Component: 100 - total flux cleaned = -0.000684412 Jy ! Component: 150 - total flux cleaned = -0.00107183 Jy ! Component: 200 - total flux cleaned = -0.00136798 Jy ! Component: 250 - total flux cleaned = -0.00147445 Jy ! Component: 300 - total flux cleaned = -0.00147434 Jy ! Component: 350 - total flux cleaned = -0.00150865 Jy ! Component: 400 - total flux cleaned = -0.00167163 Jy ! Component: 450 - total flux cleaned = -0.001735 Jy ! Component: 500 - total flux cleaned = -0.00179642 Jy ! Component: 550 - total flux cleaned = -0.00188674 Jy ! Component: 600 - total flux cleaned = -0.00203372 Jy ! Component: 650 - total flux cleaned = -0.00209124 Jy ! Component: 700 - total flux cleaned = -0.0022038 Jy ! Component: 750 - total flux cleaned = -0.00223057 Jy ! Component: 800 - total flux cleaned = -0.00233879 Jy ! Component: 850 - total flux cleaned = -0.00241805 Jy ! Component: 900 - total flux cleaned = -0.0023918 Jy ! Component: 950 - total flux cleaned = -0.00244342 Jy ! Component: 1000 - total flux cleaned = -0.00246888 Jy ! Component: 1050 - total flux cleaned = -0.00251848 Jy ! Component: 1100 - total flux cleaned = -0.00254302 Jy ! Component: 1150 - total flux cleaned = -0.00254254 Jy ! Component: 1200 - total flux cleaned = -0.00247054 Jy ! Component: 1250 - total flux cleaned = -0.00244642 Jy ! Component: 1300 - total flux cleaned = -0.00235341 Jy ! Component: 1350 - total flux cleaned = -0.00237673 Jy ! Component: 1400 - total flux cleaned = -0.00237652 Jy ! Component: 1450 - total flux cleaned = -0.00235381 Jy ! Component: 1500 - total flux cleaned = -0.00228704 Jy ! Component: 1550 - total flux cleaned = -0.00217779 Jy ! Component: 1600 - total flux cleaned = -0.0021138 Jy ! Component: 1650 - total flux cleaned = -0.00215633 Jy ! Component: 1700 - total flux cleaned = -0.0021565 Jy ! Component: 1750 - total flux cleaned = -0.002177 Jy ! Component: 1800 - total flux cleaned = -0.00213541 Jy ! Component: 1850 - total flux cleaned = -0.002176 Jy ! Component: 1900 - total flux cleaned = -0.00221652 Jy ! Component: 1950 - total flux cleaned = -0.0022366 Jy ! Component: 2000 - total flux cleaned = -0.00217708 Jy ! Component: 2050 - total flux cleaned = -0.00221667 Jy ! Component: 2100 - total flux cleaned = -0.00231402 Jy ! Component: 2150 - total flux cleaned = -0.00233356 Jy ! Component: 2200 - total flux cleaned = -0.00239092 Jy ! Component: 2250 - total flux cleaned = -0.00239076 Jy ! Component: 2300 - total flux cleaned = -0.00250368 Jy ! Component: 2350 - total flux cleaned = -0.00252221 Jy ! Component: 2400 - total flux cleaned = -0.00263314 Jy ! Component: 2450 - total flux cleaned = -0.00263303 Jy ! Component: 2500 - total flux cleaned = -0.00268723 Jy ! Component: 2550 - total flux cleaned = -0.00261506 Jy ! Component: 2600 - total flux cleaned = -0.00263294 Jy ! Component: 2650 - total flux cleaned = -0.00270407 Jy ! Component: 2700 - total flux cleaned = -0.00270399 Jy ! Component: 2750 - total flux cleaned = -0.00280892 Jy ! Component: 2800 - total flux cleaned = -0.00286092 Jy ! Component: 2850 - total flux cleaned = -0.00286104 Jy ! Component: 2900 - total flux cleaned = -0.00287811 Jy ! Component: 2950 - total flux cleaned = -0.0029291 Jy ! Component: 3000 - total flux cleaned = -0.00297982 Jy ! Component: 3050 - total flux cleaned = -0.00303012 Jy ! Component: 3100 - total flux cleaned = -0.00304673 Jy ! Component: 3150 - total flux cleaned = -0.00307952 Jy ! Component: 3200 - total flux cleaned = -0.00309589 Jy ! Component: 3250 - total flux cleaned = -0.00316086 Jy ! Component: 3300 - total flux cleaned = -0.00308004 Jy ! Component: 3350 - total flux cleaned = -0.00316036 Jy ! Component: 3400 - total flux cleaned = -0.00316049 Jy ! Component: 3450 - total flux cleaned = -0.00320816 Jy ! Component: 3500 - total flux cleaned = -0.0032711 Jy ! Component: 3550 - total flux cleaned = -0.00320896 Jy ! Component: 3600 - total flux cleaned = -0.00328641 Jy ! Component: 3650 - total flux cleaned = -0.0033633 Jy ! Component: 3700 - total flux cleaned = -0.00331749 Jy ! Component: 3750 - total flux cleaned = -0.00337819 Jy ! Component: 3800 - total flux cleaned = -0.0034083 Jy ! Component: 3850 - total flux cleaned = -0.00340847 Jy ! Component: 3900 - total flux cleaned = -0.00346821 Jy ! Component: 3950 - total flux cleaned = -0.00348311 Jy ! Component: 4000 - total flux cleaned = -0.00355666 Jy ! Component: 4050 - total flux cleaned = -0.00357128 Jy ! Total flux subtracted in 4096 components = -0.00360033 Jy ! Clean residual min=-0.000829 max=0.001011 Jy/beam ! Clean residual mean=-0.000005 rms=0.000269 Jy/beam ! Combined flux in latest and established models = 0.133004 Jy keep ! Adding 300 model components to the UV plane model. ! The established model now contains 423 components and 0.133004 Jy ![Exited script file: muppet] wmap "J1617-2537_S_2017_02_24_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.108 x 8.079 at -6.515 degrees (North through East) ! Clean map min=-0.0019287 max=0.12057 Jy/beam ! Writing clean map to FITS file: J1617-2537_S_2017_02_24_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.120572 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000270012 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.67183 0.67183 1.34366 2.68732 5.37464 10.7493 21.4986 42.9971 85.9942 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0008 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.12 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.108 x 8.079 at -6.515 degrees (North through East) ! Clean map min=-0.0019287 max=0.12057 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J1617-2537_S_2017_02_24_pus_uvs.log closed on Sat May 4 11:30:36 2019