! Started logfile: J1617-1122_S_2017_08_05_pus_uvs.log on Thu May 9 19:33:31 2019 obs J1617-1122_S_2017_08_05_pus_uva.fits ! Reading UV FITS file: J1617-1122_S_2017_08_05_pus_uva.fits ! AN table 1: 95 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.607251 visibilities/baseline/integration-bin. ! Found source: J1617-1122 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 513 lines of history. ! ! Reading 10384 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J1617-1122_S_2017_08_05_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 200 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 200 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 200 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 758 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.902233Jy sigma=0.007469 ! Fit after self-cal, rms=0.883954Jy sigma=0.007324 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.253 mas, bmaj=6.821 mas, bpa=-5.639 degrees ! Estimated noise=1163.72 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0901018 Jy ! Component: 100 - total flux cleaned = 0.109884 Jy ! Total flux subtracted in 100 components = 0.109884 Jy ! Clean residual min=-0.004554 max=0.006320 Jy/beam ! Clean residual mean=0.000005 rms=0.001212 Jy/beam ! Combined flux in latest and established models = 0.109884 Jy ! Performing phase self-cal ! Adding 6 model components to the UV plane model. ! The established model now contains 6 components and 0.109884 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.086114Jy sigma=0.000670 ! Fit after self-cal, rms=0.086111Jy sigma=0.000670 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.744 mas, bmaj=7.615 mas, bpa=-4.506 degrees ! Estimated noise=968.409 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00900993 Jy ! Component: 100 - total flux cleaned = 0.0132433 Jy ! Component: 150 - total flux cleaned = 0.015471 Jy ! Component: 200 - total flux cleaned = 0.0167539 Jy ! Total flux subtracted in 200 components = 0.0167539 Jy ! Clean residual min=-0.003767 max=0.004064 Jy/beam ! Clean residual mean=0.000005 rms=0.000847 Jy/beam ! Combined flux in latest and established models = 0.126638 Jy ! Performing phase self-cal ! Adding 34 model components to the UV plane model. ! The established model now contains 35 components and 0.126638 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.085072Jy sigma=0.000664 ! Fit after self-cal, rms=0.085077Jy sigma=0.000664 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* HN 0.96 KP 1.02 ! LA 1.03 MK 0.97 NL 0.91 OV 1.04 ! PT 1.01 SC 1.00 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* HN 1.00 KP 1.06 ! LA 0.95 MK 0.99 NL 1.05 OV 1.06 ! PT 1.00 SC 1.03 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* HN 0.98 KP 0.92 ! LA 0.76 MK 1.05 NL 1.23 OV 0.95 ! PT 0.98 SC 0.98 ! ! ! Correcting IF 4. ! A total of 192 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.00* FD 0.00* HN 0.00* KP 0.00* ! LA 0.00* MK 0.00* NL 0.00* OV 0.00* ! PT 0.00* SC 0.00* ! ! ! Fit before self-cal, rms=0.085077Jy sigma=0.000664 ! Fit after self-cal, rms=0.081968Jy sigma=0.000658 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.792 mas, bmaj=7.637 mas, bpa=-3.694 degrees ! Estimated noise=975.329 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -9.42584e-05 Jy ! Component: 100 - total flux cleaned = -8.09024e-05 Jy ! Component: 150 - total flux cleaned = -8.08528e-05 Jy ! Component: 200 - total flux cleaned = -8.09112e-05 Jy ! Total flux subtracted in 200 components = -8.09112e-05 Jy ! Clean residual min=-0.002591 max=0.002469 Jy/beam ! Clean residual mean=0.000001 rms=0.000667 Jy/beam ! Combined flux in latest and established models = 0.126557 Jy ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 45 components and 0.126557 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.081964Jy sigma=0.000658 ! Fit after self-cal, rms=0.081940Jy sigma=0.000658 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.081940Jy sigma=0.000658 ! Fit after self-cal, rms=0.081827Jy sigma=0.000657 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.794 mas, bmaj=7.634 mas, bpa=-3.629 degrees ! Estimated noise=974.702 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 4.61512e-05 Jy ! Component: 100 - total flux cleaned = 6.93184e-05 Jy ! Component: 150 - total flux cleaned = 7.90053e-05 Jy ! Component: 200 - total flux cleaned = 7.07396e-05 Jy ! Total flux subtracted in 200 components = 7.07396e-05 Jy ! Clean residual min=-0.002556 max=0.002530 Jy/beam ! Clean residual mean=0.000002 rms=0.000648 Jy/beam ! Combined flux in latest and established models = 0.126627 Jy selfcal ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 56 components and 0.126627 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.081824Jy sigma=0.000657 ! Fit after self-cal, rms=0.081828Jy sigma=0.000657 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 5.41944e-05 Jy ! Component: 100 - total flux cleaned = 4.62637e-05 Jy ! Component: 150 - total flux cleaned = 4.66589e-05 Jy ! Component: 200 - total flux cleaned = 5.37277e-05 Jy ! Total flux subtracted in 200 components = 5.37277e-05 Jy ! Clean residual min=-0.002533 max=0.002506 Jy/beam ! Clean residual mean=0.000002 rms=0.000646 Jy/beam ! Combined flux in latest and established models = 0.126681 Jy ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 58 components and 0.126681 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.081826Jy sigma=0.000657 ! Fit after self-cal, rms=0.081825Jy sigma=0.000657 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.081825Jy sigma=0.000657 ! Fit after self-cal, rms=0.081782Jy sigma=0.000657 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.794 mas, bmaj=7.632 mas, bpa=-3.577 degrees ! Estimated noise=973.972 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -5.02173e-05 Jy ! Component: 100 - total flux cleaned = -3.10969e-05 Jy ! Component: 150 - total flux cleaned = -2.37398e-05 Jy ! Component: 200 - total flux cleaned = -3.06217e-05 Jy ! Total flux subtracted in 200 components = -3.06217e-05 Jy ! Clean residual min=-0.002531 max=0.002482 Jy/beam ! Clean residual mean=0.000002 rms=0.000645 Jy/beam ! Combined flux in latest and established models = 0.126651 Jy selfcal ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 59 components and 0.126651 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.081779Jy sigma=0.000657 ! Fit after self-cal, rms=0.081780Jy sigma=0.000657 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 8.99458e-06 Jy ! Component: 100 - total flux cleaned = 8.83652e-06 Jy ! Component: 150 - total flux cleaned = 8.58246e-06 Jy ! Component: 200 - total flux cleaned = 8.30806e-06 Jy ! Total flux subtracted in 200 components = 8.30806e-06 Jy ! Clean residual min=-0.002532 max=0.002471 Jy/beam ! Clean residual mean=0.000002 rms=0.000644 Jy/beam ! Combined flux in latest and established models = 0.126659 Jy ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 63 components and 0.126659 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.081779Jy sigma=0.000657 ! Fit after self-cal, rms=0.081779Jy sigma=0.000657 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.081779Jy sigma=0.000657 ! Fit after self-cal, rms=0.081738Jy sigma=0.000657 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=6.688 mas, bmaj=15.68 mas, bpa=-4.381 degrees ! Estimated noise=1325.57 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -9.54209e-06 Jy ! Component: 100 - total flux cleaned = -3.71972e-05 Jy ! Component: 150 - total flux cleaned = -5.59898e-05 Jy ! Component: 200 - total flux cleaned = -7.19943e-05 Jy ! Total flux subtracted in 200 components = -7.19943e-05 Jy ! Clean residual min=-0.002498 max=0.003185 Jy/beam ! Clean residual mean=0.000002 rms=0.000813 Jy/beam ! Combined flux in latest and established models = 0.126587 Jy selfcal ! Performing phase self-cal ! Adding 7 model components to the UV plane model. ! The established model now contains 66 components and 0.126587 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.081746Jy sigma=0.000657 ! Fit after self-cal, rms=0.081740Jy sigma=0.000657 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -8.15538e-05 Jy ! Component: 100 - total flux cleaned = -0.00010135 Jy ! Component: 150 - total flux cleaned = -0.000115932 Jy ! Component: 200 - total flux cleaned = -0.00012802 Jy ! Total flux subtracted in 200 components = -0.00012802 Jy ! Clean residual min=-0.002481 max=0.003168 Jy/beam ! Clean residual mean=0.000002 rms=0.000806 Jy/beam ! Combined flux in latest and established models = 0.126459 Jy ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 68 components and 0.126459 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.081752Jy sigma=0.000657 ! Fit after self-cal, rms=0.081748Jy sigma=0.000657 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=2.795 mas, bmaj=7.63 mas, bpa=-3.526 degrees ! Estimated noise=973.393 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.795 x 7.63 at -3.526 degrees (North through East) ! Clean map min=-0.0023558 max=0.11759 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.296 mas, bmaj=6.793 mas, bpa=-4.46 degrees ! Estimated noise=1167.86 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0899921 Jy ! Component: 100 - total flux cleaned = 0.109625 Jy ! Component: 150 - total flux cleaned = 0.11583 Jy ! Component: 200 - total flux cleaned = 0.119566 Jy ! Total flux subtracted in 200 components = 0.119566 Jy ! Clean residual min=-0.003276 max=0.003103 Jy/beam ! Clean residual mean=0.000002 rms=0.000799 Jy/beam ! Combined flux in latest and established models = 0.119566 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 22 model components to the UV plane model. ! The established model now contains 22 components and 0.119566 Jy ! Inverting map and beam ! Estimated beam: bmin=2.795 mas, bmaj=7.63 mas, bpa=-3.526 degrees ! Estimated noise=973.393 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00359384 Jy ! Component: 100 - total flux cleaned = 0.00542188 Jy ! Component: 150 - total flux cleaned = 0.00629378 Jy ! Component: 200 - total flux cleaned = 0.00650488 Jy ! Total flux subtracted in 200 components = 0.00650488 Jy ! Clean residual min=-0.002523 max=0.002378 Jy/beam ! Clean residual mean=0.000002 rms=0.000644 Jy/beam ! Combined flux in latest and established models = 0.126071 Jy ! Adding 34 model components to the UV plane model. ! The established model now contains 50 components and 0.126071 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=6.688 mas, bmaj=15.68 mas, bpa=-4.381 degrees ! Estimated noise=1325.57 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000530806 Jy ! Component: 100 - total flux cleaned = 0.000526547 Jy ! Component: 150 - total flux cleaned = 0.000508668 Jy ! Component: 200 - total flux cleaned = 0.000494125 Jy ! Total flux subtracted in 200 components = 0.000494125 Jy ! Clean residual min=-0.002483 max=0.003184 Jy/beam ! Clean residual mean=0.000002 rms=0.000812 Jy/beam ! Combined flux in latest and established models = 0.126565 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -1.19602e-05 Jy ! Component: 100 - total flux cleaned = -2.25983e-05 Jy ! Component: 150 - total flux cleaned = -3.22313e-05 Jy ! Component: 200 - total flux cleaned = -4.11376e-05 Jy ! Total flux subtracted in 200 components = -4.11376e-05 Jy ! Clean residual min=-0.002454 max=0.003172 Jy/beam ! Clean residual mean=0.000002 rms=0.000803 Jy/beam ! Combined flux in latest and established models = 0.126523 Jy ! Adding 12 model components to the UV plane model. ! The established model now contains 53 components and 0.126524 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=2.795 mas, bmaj=7.63 mas, bpa=-3.526 degrees ! Estimated noise=973.393 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000395918 Jy ! Component: 100 - total flux cleaned = -0.000329826 Jy ! Component: 150 - total flux cleaned = -0.000242379 Jy ! Component: 200 - total flux cleaned = -0.000213873 Jy ! Total flux subtracted in 200 components = -0.000213873 Jy ! Clean residual min=-0.002502 max=0.002427 Jy/beam ! Clean residual mean=0.000002 rms=0.000637 Jy/beam ! Combined flux in latest and established models = 0.12631 Jy selfcal ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 61 components and 0.12631 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.081738Jy sigma=0.000657 ! Fit after self-cal, rms=0.081736Jy sigma=0.000657 wmodel J1617-1122_S_2017_08_05_pus_map.mod ! Writing 61 model components to file: J1617-1122_S_2017_08_05_pus_map.mod wobs J1617-1122_S_2017_08_05_pus_uvs.fits ! Writing UV FITS file: J1617-1122_S_2017_08_05_pus_uvs.fits wwins J1617-1122_S_2017_08_05_pus_map.win ! wwins: Wrote 1 windows to J1617-1122_S_2017_08_05_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -5.9094e-06 Jy ! Component: 100 - total flux cleaned = -0.000174581 Jy ! Component: 150 - total flux cleaned = -0.000214173 Jy ! Component: 200 - total flux cleaned = -0.000213824 Jy ! Component: 250 - total flux cleaned = -0.000357403 Jy ! Component: 300 - total flux cleaned = -0.000565249 Jy ! Component: 350 - total flux cleaned = -0.000731232 Jy ! Component: 400 - total flux cleaned = -0.00079487 Jy ! Component: 450 - total flux cleaned = -0.000950672 Jy ! Component: 500 - total flux cleaned = -0.00110224 Jy ! Component: 550 - total flux cleaned = -0.00121989 Jy ! Component: 600 - total flux cleaned = -0.00139137 Jy ! Component: 650 - total flux cleaned = -0.00147425 Jy ! Component: 700 - total flux cleaned = -0.0015288 Jy ! Component: 750 - total flux cleaned = -0.00166002 Jy ! Component: 800 - total flux cleaned = -0.00160771 Jy ! Component: 850 - total flux cleaned = -0.00160715 Jy ! Component: 900 - total flux cleaned = -0.00160692 Jy ! Component: 950 - total flux cleaned = -0.00175219 Jy ! Component: 1000 - total flux cleaned = -0.0017047 Jy ! Component: 1050 - total flux cleaned = -0.0017046 Jy ! Component: 1100 - total flux cleaned = -0.00165921 Jy ! Component: 1150 - total flux cleaned = -0.0016598 Jy ! Component: 1200 - total flux cleaned = -0.0017029 Jy ! Component: 1250 - total flux cleaned = -0.00168093 Jy ! Component: 1300 - total flux cleaned = -0.00170176 Jy ! Component: 1350 - total flux cleaned = -0.00166106 Jy ! Component: 1400 - total flux cleaned = -0.00176227 Jy ! Component: 1450 - total flux cleaned = -0.00176247 Jy ! Component: 1500 - total flux cleaned = -0.00180193 Jy ! Component: 1550 - total flux cleaned = -0.0018014 Jy ! Component: 1600 - total flux cleaned = -0.00176366 Jy ! Component: 1650 - total flux cleaned = -0.00180078 Jy ! Component: 1700 - total flux cleaned = -0.00178236 Jy ! Component: 1750 - total flux cleaned = -0.0017827 Jy ! Component: 1800 - total flux cleaned = -0.0018532 Jy ! Component: 1850 - total flux cleaned = -0.00180058 Jy ! Component: 1900 - total flux cleaned = -0.00181805 Jy ! Component: 1950 - total flux cleaned = -0.00183529 Jy ! Component: 2000 - total flux cleaned = -0.00185239 Jy ! Component: 2050 - total flux cleaned = -0.0018196 Jy ! Component: 2100 - total flux cleaned = -0.00190096 Jy ! Component: 2150 - total flux cleaned = -0.00185254 Jy ! Component: 2200 - total flux cleaned = -0.00180501 Jy ! Component: 2250 - total flux cleaned = -0.0018362 Jy ! Component: 2300 - total flux cleaned = -0.00183593 Jy ! Component: 2350 - total flux cleaned = -0.00179015 Jy ! Component: 2400 - total flux cleaned = -0.00173 Jy ! Component: 2450 - total flux cleaned = -0.00167088 Jy ! Component: 2500 - total flux cleaned = -0.00171512 Jy ! Component: 2550 - total flux cleaned = -0.00165685 Jy ! Component: 2600 - total flux cleaned = -0.00164234 Jy ! Component: 2650 - total flux cleaned = -0.00161374 Jy ! Component: 2700 - total flux cleaned = -0.00161362 Jy ! Component: 2750 - total flux cleaned = -0.00155803 Jy ! Component: 2800 - total flux cleaned = -0.00146195 Jy ! Component: 2850 - total flux cleaned = -0.00146189 Jy ! Component: 2900 - total flux cleaned = -0.00142158 Jy ! Component: 2950 - total flux cleaned = -0.00136856 Jy ! Component: 3000 - total flux cleaned = -0.00134222 Jy ! Component: 3050 - total flux cleaned = -0.00130319 Jy ! Component: 3100 - total flux cleaned = -0.00130298 Jy ! Component: 3150 - total flux cleaned = -0.00125179 Jy ! Component: 3200 - total flux cleaned = -0.00118857 Jy ! Component: 3250 - total flux cleaned = -0.00116365 Jy ! Component: 3300 - total flux cleaned = -0.00112645 Jy ! Component: 3350 - total flux cleaned = -0.00104072 Jy ! Component: 3400 - total flux cleaned = -0.00106503 Jy ! Component: 3450 - total flux cleaned = -0.0010168 Jy ! Component: 3500 - total flux cleaned = -0.000993053 Jy ! Component: 3550 - total flux cleaned = -0.000969397 Jy ! Component: 3600 - total flux cleaned = -0.000969407 Jy ! Component: 3650 - total flux cleaned = -0.000957636 Jy ! Component: 3700 - total flux cleaned = -0.000888553 Jy ! Component: 3750 - total flux cleaned = -0.000899976 Jy ! Component: 3800 - total flux cleaned = -0.000865916 Jy ! Component: 3850 - total flux cleaned = -0.000854687 Jy ! Component: 3900 - total flux cleaned = -0.000843529 Jy ! Component: 3950 - total flux cleaned = -0.000832386 Jy ! Component: 4000 - total flux cleaned = -0.000821342 Jy ! Component: 4050 - total flux cleaned = -0.000843112 Jy ! Total flux subtracted in 4096 components = -0.000832285 Jy ! Clean residual min=-0.000691 max=0.000711 Jy/beam ! Clean residual mean=0.000001 rms=0.000191 Jy/beam ! Combined flux in latest and established models = 0.125477 Jy keep ! Adding 274 model components to the UV plane model. ! The established model now contains 335 components and 0.125477 Jy ![Exited script file: muppet] wmap "J1617-1122_S_2017_08_05_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.795 x 7.63 at -3.526 degrees (North through East) ! Clean map min=-0.0014198 max=0.11699 Jy/beam ! Writing clean map to FITS file: J1617-1122_S_2017_08_05_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.116988 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000186467 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.478171 0.478171 0.956341 1.91268 3.82537 7.65073 15.3015 30.6029 61.2059 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0005 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.116 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.795 x 7.63 at -3.526 degrees (North through East) ! Clean map min=-0.0014198 max=0.11699 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J1617-1122_S_2017_08_05_pus_uvs.log closed on Thu May 9 19:33:36 2019