! Started logfile: J1616-3509_S_2017_10_21_pus_uvs.log on Sat May 11 21:01:51 2019 obs J1616-3509_S_2017_10_21_pus_uva.fits ! Reading UV FITS file: J1616-3509_S_2017_10_21_pus_uva.fits ! AN table 1: 115 integrations on 36 of 36 possible baselines. ! Apparent sampling: 0.64372 visibilities/baseline/integration-bin. ! Found source: J1616-3509 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 644 lines of history. ! ! Reading 10660 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J1616-3509_S_2017_10_21_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 280 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 240 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 196 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 669 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.867772Jy sigma=0.005811 ! Fit after self-cal, rms=0.840705Jy sigma=0.005630 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.734 mas, bmaj=11.49 mas, bpa=-18.85 degrees ! Estimated noise=1810.7 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.113494 Jy ! Component: 100 - total flux cleaned = 0.164291 Jy ! Total flux subtracted in 100 components = 0.164291 Jy ! Clean residual min=-0.018391 max=0.037880 Jy/beam ! Clean residual mean=-0.000053 rms=0.007241 Jy/beam ! Combined flux in latest and established models = 0.164291 Jy ! Performing phase self-cal ! Adding 28 model components to the UV plane model. ! The established model now contains 28 components and 0.164291 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.165368Jy sigma=0.001051 ! Fit after self-cal, rms=0.165209Jy sigma=0.001049 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.483 mas, bmaj=14.19 mas, bpa=-19.08 degrees ! Estimated noise=1227.99 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0522283 Jy ! Component: 100 - total flux cleaned = 0.0770262 Jy ! Component: 150 - total flux cleaned = 0.0894521 Jy ! Component: 200 - total flux cleaned = 0.0960387 Jy ! Total flux subtracted in 200 components = 0.0960387 Jy ! Clean residual min=-0.022665 max=0.047994 Jy/beam ! Clean residual mean=-0.000193 rms=0.009396 Jy/beam ! Combined flux in latest and established models = 0.260329 Jy ! Performing phase self-cal ! Adding 50 model components to the UV plane model. ! The established model now contains 69 components and 0.260329 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.149668Jy sigma=0.000939 ! Fit after self-cal, rms=0.149543Jy sigma=0.000938 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.02 HN 1.00* KP 1.14 ! LA 1.04 MK 1.03 NL 0.95 OV 1.05 ! PT 0.84 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.06 HN 1.05 KP 1.07 ! LA 0.99 MK 1.10 NL 1.15 OV 1.08 ! PT 0.84 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.10 HN 1.04 KP 1.13 ! LA 0.74 MK 1.17 NL 1.25 OV 1.02 ! PT 0.81 ! ! ! Correcting IF 4. ! A total of 90 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.02 HN 1.00* KP 1.00* ! LA 0.86 MK 0.99 NL 1.00* OV 1.00* ! PT 0.78 ! ! ! Fit before self-cal, rms=0.149543Jy sigma=0.000938 ! Fit after self-cal, rms=0.146470Jy sigma=0.000913 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.615 mas, bmaj=14.63 mas, bpa=-19.64 degrees ! Estimated noise=1264.45 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-13.5, -40.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0440131 Jy ! Component: 100 - total flux cleaned = 0.0597803 Jy ! Component: 150 - total flux cleaned = 0.0653922 Jy ! Component: 200 - total flux cleaned = 0.0663868 Jy ! Total flux subtracted in 200 components = 0.0663868 Jy ! Clean residual min=-0.015728 max=0.027734 Jy/beam ! Clean residual mean=-0.000082 rms=0.005592 Jy/beam ! Combined flux in latest and established models = 0.326716 Jy ! Performing phase self-cal ! Adding 71 model components to the UV plane model. ! The established model now contains 140 components and 0.326716 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.133726Jy sigma=0.000810 ! Fit after self-cal, rms=0.130879Jy sigma=0.000787 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.130879Jy sigma=0.000787 ! Fit after self-cal, rms=0.126450Jy sigma=0.000760 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.558 mas, bmaj=14.62 mas, bpa=-20.15 degrees ! Estimated noise=1226.05 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0150239 Jy ! Component: 100 - total flux cleaned = 0.01768 Jy ! Component: 150 - total flux cleaned = 0.0187666 Jy ! Component: 200 - total flux cleaned = 0.0187766 Jy ! Total flux subtracted in 200 components = 0.0187766 Jy ! Clean residual min=-0.007441 max=0.013029 Jy/beam ! Clean residual mean=-0.000075 rms=0.002946 Jy/beam ! Combined flux in latest and established models = 0.345493 Jy selfcal ! Performing phase self-cal ! Adding 57 model components to the UV plane model. ! The established model now contains 183 components and 0.345493 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.123418Jy sigma=0.000738 ! Fit after self-cal, rms=0.122884Jy sigma=0.000734 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-63, 69.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0120958 Jy ! Component: 100 - total flux cleaned = 0.0153171 Jy ! Component: 150 - total flux cleaned = 0.0166848 Jy ! Component: 200 - total flux cleaned = 0.0178221 Jy ! Total flux subtracted in 200 components = 0.0178221 Jy ! Clean residual min=-0.006139 max=0.008042 Jy/beam ! Clean residual mean=-0.000012 rms=0.002261 Jy/beam ! Combined flux in latest and established models = 0.363315 Jy ! Performing phase self-cal ! Adding 81 model components to the UV plane model. ! The established model now contains 255 components and 0.363315 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.121368Jy sigma=0.000725 ! Fit after self-cal, rms=0.121087Jy sigma=0.000723 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.121087Jy sigma=0.000723 ! Fit after self-cal, rms=0.118277Jy sigma=0.000720 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.56 mas, bmaj=14.61 mas, bpa=-20.35 degrees ! Estimated noise=1209.34 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00465478 Jy ! Component: 100 - total flux cleaned = 0.00484036 Jy ! Component: 150 - total flux cleaned = 0.00532357 Jy ! Component: 200 - total flux cleaned = 0.005727 Jy ! Total flux subtracted in 200 components = 0.005727 Jy ! Clean residual min=-0.005967 max=0.006433 Jy/beam ! Clean residual mean=-0.000002 rms=0.001626 Jy/beam ! Combined flux in latest and established models = 0.369042 Jy selfcal ! Performing phase self-cal ! Adding 68 model components to the UV plane model. ! The established model now contains 302 components and 0.369042 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.117675Jy sigma=0.000715 ! Fit after self-cal, rms=0.117550Jy sigma=0.000715 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (38, -127.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00427294 Jy ! Component: 100 - total flux cleaned = 0.00470408 Jy ! Component: 150 - total flux cleaned = 0.00449421 Jy ! Component: 200 - total flux cleaned = 0.0042078 Jy ! Total flux subtracted in 200 components = 0.0042078 Jy ! Clean residual min=-0.005540 max=0.005085 Jy/beam ! Clean residual mean=0.000003 rms=0.001345 Jy/beam ! Combined flux in latest and established models = 0.37325 Jy ! Performing phase self-cal ! Adding 50 model components to the UV plane model. ! The established model now contains 340 components and 0.37325 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.117144Jy sigma=0.000712 ! Fit after self-cal, rms=0.117123Jy sigma=0.000712 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.117123Jy sigma=0.000712 ! Fit after self-cal, rms=0.117289Jy sigma=0.000711 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=9.52 mas, bmaj=31.09 mas, bpa=-7.955 degrees ! Estimated noise=1425.31 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00263752 Jy ! Component: 100 - total flux cleaned = 0.00267509 Jy ! Component: 150 - total flux cleaned = 0.00229825 Jy ! Component: 200 - total flux cleaned = 0.00189144 Jy ! Total flux subtracted in 200 components = 0.00189144 Jy ! Clean residual min=-0.005443 max=0.005234 Jy/beam ! Clean residual mean=-0.000005 rms=0.001485 Jy/beam ! Combined flux in latest and established models = 0.375141 Jy selfcal ! Performing phase self-cal ! Adding 35 model components to the UV plane model. ! The established model now contains 370 components and 0.375141 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.117132Jy sigma=0.000710 ! Fit after self-cal, rms=0.117084Jy sigma=0.000710 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000411608 Jy ! Component: 100 - total flux cleaned = 0.000163271 Jy ! Component: 150 - total flux cleaned = -4.73656e-05 Jy ! Component: 200 - total flux cleaned = -0.000292537 Jy ! Total flux subtracted in 200 components = -0.000292537 Jy ! Clean residual min=-0.004779 max=0.004782 Jy/beam ! Clean residual mean=-0.000015 rms=0.001322 Jy/beam ! Combined flux in latest and established models = 0.374848 Jy ! Performing phase self-cal ! Adding 29 model components to the UV plane model. ! The established model now contains 391 components and 0.374848 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.117046Jy sigma=0.000710 ! Fit after self-cal, rms=0.117053Jy sigma=0.000709 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.576 mas, bmaj=14.65 mas, bpa=-20.4 degrees ! Estimated noise=1213.07 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.576 x 14.65 at -20.4 degrees (North through East) ! Clean map min=-0.0042152 max=0.12163 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.788 mas, bmaj=11.87 mas, bpa=-20.54 degrees ! Estimated noise=1877.87 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.115921 Jy ! Component: 100 - total flux cleaned = 0.176722 Jy ! Component: 150 - total flux cleaned = 0.218487 Jy ! Component: 200 - total flux cleaned = 0.247856 Jy ! Total flux subtracted in 200 components = 0.247856 Jy ! Clean residual min=-0.012407 max=0.016916 Jy/beam ! Clean residual mean=-0.000023 rms=0.004004 Jy/beam ! Combined flux in latest and established models = 0.247856 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 88 model components to the UV plane model. ! The established model now contains 88 components and 0.247856 Jy ! Inverting map and beam ! Estimated beam: bmin=3.576 mas, bmaj=14.65 mas, bpa=-20.4 degrees ! Estimated noise=1213.07 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0337549 Jy ! Component: 100 - total flux cleaned = 0.0555346 Jy ! Component: 150 - total flux cleaned = 0.0715064 Jy ! Component: 200 - total flux cleaned = 0.0836003 Jy ! Total flux subtracted in 200 components = 0.0836003 Jy ! Clean residual min=-0.007386 max=0.008801 Jy/beam ! Clean residual mean=-0.000039 rms=0.002342 Jy/beam ! Combined flux in latest and established models = 0.331457 Jy ! Adding 116 model components to the UV plane model. ! The established model now contains 194 components and 0.331456 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=9.52 mas, bmaj=31.09 mas, bpa=-7.955 degrees ! Estimated noise=1425.31 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0135837 Jy ! Component: 100 - total flux cleaned = 0.0228629 Jy ! Component: 150 - total flux cleaned = 0.0294166 Jy ! Component: 200 - total flux cleaned = 0.032755 Jy ! Total flux subtracted in 200 components = 0.032755 Jy ! Clean residual min=-0.004908 max=0.005149 Jy/beam ! Clean residual mean=-0.000039 rms=0.001551 Jy/beam ! Combined flux in latest and established models = 0.364212 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00214908 Jy ! Component: 100 - total flux cleaned = 0.00387232 Jy ! Component: 150 - total flux cleaned = 0.00526153 Jy ! Component: 200 - total flux cleaned = 0.00608851 Jy ! Total flux subtracted in 200 components = 0.00608851 Jy ! Clean residual min=-0.004452 max=0.004441 Jy/beam ! Clean residual mean=-0.000027 rms=0.001259 Jy/beam ! Combined flux in latest and established models = 0.3703 Jy ! Adding 112 model components to the UV plane model. ! The established model now contains 300 components and 0.3703 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.576 mas, bmaj=14.65 mas, bpa=-20.4 degrees ! Estimated noise=1213.07 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000875524 Jy ! Component: 100 - total flux cleaned = 0.00142216 Jy ! Component: 150 - total flux cleaned = 0.00190826 Jy ! Component: 200 - total flux cleaned = 0.00240927 Jy ! Total flux subtracted in 200 components = 0.00240927 Jy ! Clean residual min=-0.004403 max=0.004349 Jy/beam ! Clean residual mean=-0.000019 rms=0.001002 Jy/beam ! Combined flux in latest and established models = 0.372709 Jy selfcal ! Performing phase self-cal ! Adding 34 model components to the UV plane model. ! The established model now contains 332 components and 0.372709 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.117077Jy sigma=0.000709 ! Fit after self-cal, rms=0.116940Jy sigma=0.000708 wmodel J1616-3509_S_2017_10_21_pus_map.mod ! Writing 332 model components to file: J1616-3509_S_2017_10_21_pus_map.mod wobs J1616-3509_S_2017_10_21_pus_uvs.fits ! Writing UV FITS file: J1616-3509_S_2017_10_21_pus_uvs.fits wwins J1616-3509_S_2017_10_21_pus_map.win ! wwins: Wrote 4 windows to J1616-3509_S_2017_10_21_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.000290285 Jy ! Component: 100 - total flux cleaned = -0.000728373 Jy ! Component: 150 - total flux cleaned = -0.00108313 Jy ! Component: 200 - total flux cleaned = -0.00141877 Jy ! Component: 250 - total flux cleaned = -0.00164748 Jy ! Component: 300 - total flux cleaned = -0.00173553 Jy ! Component: 350 - total flux cleaned = -0.0016943 Jy ! Component: 400 - total flux cleaned = -0.00165324 Jy ! Component: 450 - total flux cleaned = -0.00161429 Jy ! Component: 500 - total flux cleaned = -0.00161448 Jy ! Component: 550 - total flux cleaned = -0.00161442 Jy ! Component: 600 - total flux cleaned = -0.0016501 Jy ! Component: 650 - total flux cleaned = -0.00168457 Jy ! Component: 700 - total flux cleaned = -0.00171845 Jy ! Component: 750 - total flux cleaned = -0.00175235 Jy ! Component: 800 - total flux cleaned = -0.00175238 Jy ! Component: 850 - total flux cleaned = -0.00178448 Jy ! Component: 900 - total flux cleaned = -0.00175341 Jy ! Component: 950 - total flux cleaned = -0.00178335 Jy ! Component: 1000 - total flux cleaned = -0.00175321 Jy ! Component: 1050 - total flux cleaned = -0.00175324 Jy ! Component: 1100 - total flux cleaned = -0.00169586 Jy ! Component: 1150 - total flux cleaned = -0.00166785 Jy ! Component: 1200 - total flux cleaned = -0.00166808 Jy ! Component: 1250 - total flux cleaned = -0.00164053 Jy ! Component: 1300 - total flux cleaned = -0.00164037 Jy ! Component: 1350 - total flux cleaned = -0.00153572 Jy ! Component: 1400 - total flux cleaned = -0.00153605 Jy ! Component: 1450 - total flux cleaned = -0.00143479 Jy ! Component: 1500 - total flux cleaned = -0.00143488 Jy ! Component: 1550 - total flux cleaned = -0.00141055 Jy ! Component: 1600 - total flux cleaned = -0.00145849 Jy ! Component: 1650 - total flux cleaned = -0.00148172 Jy ! Component: 1700 - total flux cleaned = -0.00148151 Jy ! Component: 1750 - total flux cleaned = -0.00148176 Jy ! Component: 1800 - total flux cleaned = -0.00148207 Jy ! Component: 1850 - total flux cleaned = -0.00154923 Jy ! Component: 1900 - total flux cleaned = -0.00161532 Jy ! Component: 1950 - total flux cleaned = -0.00165857 Jy ! Component: 2000 - total flux cleaned = -0.00170159 Jy ! Component: 2050 - total flux cleaned = -0.0017866 Jy ! Component: 2100 - total flux cleaned = -0.00191216 Jy ! Component: 2150 - total flux cleaned = -0.00197415 Jy ! Component: 2200 - total flux cleaned = -0.00201527 Jy ! Component: 2250 - total flux cleaned = -0.00213634 Jy ! Component: 2300 - total flux cleaned = -0.0021361 Jy ! Component: 2350 - total flux cleaned = -0.00219535 Jy ! Component: 2400 - total flux cleaned = -0.00219546 Jy ! Component: 2450 - total flux cleaned = -0.00225343 Jy ! Component: 2500 - total flux cleaned = -0.0022535 Jy ! Component: 2550 - total flux cleaned = -0.00225346 Jy ! Component: 2600 - total flux cleaned = -0.0022158 Jy ! Component: 2650 - total flux cleaned = -0.00221599 Jy ! Component: 2700 - total flux cleaned = -0.00223452 Jy ! Component: 2750 - total flux cleaned = -0.00221599 Jy ! Component: 2800 - total flux cleaned = -0.00221599 Jy ! Component: 2850 - total flux cleaned = -0.00221581 Jy ! Component: 2900 - total flux cleaned = -0.0021979 Jy ! Component: 2950 - total flux cleaned = -0.00223363 Jy ! Component: 3000 - total flux cleaned = -0.00225128 Jy ! Component: 3050 - total flux cleaned = -0.00228651 Jy ! Component: 3100 - total flux cleaned = -0.00228636 Jy ! Component: 3150 - total flux cleaned = -0.00226885 Jy ! Component: 3200 - total flux cleaned = -0.00230336 Jy ! Component: 3250 - total flux cleaned = -0.00223476 Jy ! Component: 3300 - total flux cleaned = -0.00223488 Jy ! Component: 3350 - total flux cleaned = -0.00225192 Jy ! Component: 3400 - total flux cleaned = -0.00221792 Jy ! Component: 3450 - total flux cleaned = -0.00215031 Jy ! Component: 3500 - total flux cleaned = -0.00213357 Jy ! Component: 3550 - total flux cleaned = -0.0021169 Jy ! Component: 3600 - total flux cleaned = -0.0020836 Jy ! Component: 3650 - total flux cleaned = -0.00201728 Jy ! Component: 3700 - total flux cleaned = -0.00200078 Jy ! Component: 3750 - total flux cleaned = -0.00196781 Jy ! Component: 3800 - total flux cleaned = -0.00188581 Jy ! Component: 3850 - total flux cleaned = -0.00186949 Jy ! Component: 3900 - total flux cleaned = -0.00185325 Jy ! Component: 3950 - total flux cleaned = -0.00180453 Jy ! Component: 4000 - total flux cleaned = -0.00172368 Jy ! Component: 4050 - total flux cleaned = -0.00169148 Jy ! Total flux subtracted in 4096 components = -0.0016593 Jy ! Clean residual min=-0.000870 max=0.000853 Jy/beam ! Clean residual mean=-0.000012 rms=0.000309 Jy/beam ! Combined flux in latest and established models = 0.37105 Jy keep ! Adding 277 model components to the UV plane model. ! The established model now contains 609 components and 0.37105 Jy ![Exited script file: muppet] wmap "J1616-3509_S_2017_10_21_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.576 x 14.65 at -20.4 degrees (North through East) ! Clean map min=-0.0026259 max=0.12088 Jy/beam ! Writing clean map to FITS file: J1616-3509_S_2017_10_21_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.120883 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000311234 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.772403 0.772403 1.54481 3.08961 6.17922 12.3584 24.7169 49.4338 98.8676 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0009 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.12 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.576 x 14.65 at -20.4 degrees (North through East) ! Clean map min=-0.0026259 max=0.12088 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J1616-3509_S_2017_10_21_pus_uvs.log closed on Sat May 11 21:01:56 2019