! Started logfile: J1616+4632_S_2017_03_23_pus_uvs.log on Mon May 13 10:03:37 2019 obs J1616+4632_S_2017_03_23_pus_uva.fits ! Reading UV FITS file: J1616+4632_S_2017_03_23_pus_uva.fits ! AN table 1: 83 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.770817 visibilities/baseline/integration-bin. ! Found source: J1616+4632 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 481 lines of history. ! ! Reading 11516 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J1616+4632_S_2017_03_23_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 102 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 102 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 102 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 367 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.894328Jy sigma=0.007958 ! Fit after self-cal, rms=0.886890Jy sigma=0.007903 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.075 mas, bmaj=5.327 mas, bpa=-14.88 degrees ! Estimated noise=1156.76 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0892933 Jy ! Component: 100 - total flux cleaned = 0.109103 Jy ! Total flux subtracted in 100 components = 0.109103 Jy ! Clean residual min=-0.004793 max=0.006491 Jy/beam ! Clean residual mean=0.000030 rms=0.001221 Jy/beam ! Combined flux in latest and established models = 0.109103 Jy ! Performing phase self-cal ! Adding 6 model components to the UV plane model. ! The established model now contains 6 components and 0.109103 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.085145Jy sigma=0.000679 ! Fit after self-cal, rms=0.085138Jy sigma=0.000679 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.65 mas, bmaj=6.089 mas, bpa=-14.12 degrees ! Estimated noise=825.102 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0079217 Jy ! Component: 100 - total flux cleaned = 0.01143 Jy ! Component: 150 - total flux cleaned = 0.0134995 Jy ! Component: 200 - total flux cleaned = 0.0143895 Jy ! Total flux subtracted in 200 components = 0.0143895 Jy ! Clean residual min=-0.003546 max=0.003888 Jy/beam ! Clean residual mean=0.000039 rms=0.000915 Jy/beam ! Combined flux in latest and established models = 0.123492 Jy ! Performing phase self-cal ! Adding 34 model components to the UV plane model. ! The established model now contains 35 components and 0.123492 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.084405Jy sigma=0.000673 ! Fit after self-cal, rms=0.084426Jy sigma=0.000673 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.02 FD 0.94 HN 0.98 KP 1.02 ! LA 1.01 MK 1.04 NL 0.86 OV 1.01 ! PT 0.99 SC 0.95 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.10 FD 1.03 HN 0.97 KP 0.97 ! LA 0.94 MK 1.02 NL 1.10 OV 1.08 ! PT 0.97 SC 1.04 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 0.94 FD 1.00 HN 0.94 KP 0.91 ! LA 0.76 MK 1.09 NL 1.17 OV 0.97 ! PT 0.96 SC 1.04 ! ! ! Correcting IF 4. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.16 FD 1.03 HN 1.01 KP 1.00* ! LA 0.83 MK 1.20 NL 1.00* OV 1.78 ! PT 0.97 SC 1.00* ! ! ! Fit before self-cal, rms=0.084426Jy sigma=0.000673 ! Fit after self-cal, rms=0.085420Jy sigma=0.000657 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.697 mas, bmaj=6.132 mas, bpa=-13.86 degrees ! Estimated noise=826.043 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000943237 Jy ! Component: 100 - total flux cleaned = -0.00101284 Jy ! Component: 150 - total flux cleaned = -0.00112513 Jy ! Component: 200 - total flux cleaned = -0.00122392 Jy ! Total flux subtracted in 200 components = -0.00122392 Jy ! Clean residual min=-0.002607 max=0.002490 Jy/beam ! Clean residual mean=0.000013 rms=0.000636 Jy/beam ! Combined flux in latest and established models = 0.122268 Jy ! Performing phase self-cal ! Adding 8 model components to the UV plane model. ! The established model now contains 42 components and 0.122268 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.085403Jy sigma=0.000657 ! Fit after self-cal, rms=0.085629Jy sigma=0.000657 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.085629Jy sigma=0.000657 ! Fit after self-cal, rms=0.087439Jy sigma=0.000654 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.703 mas, bmaj=6.155 mas, bpa=-13.68 degrees ! Estimated noise=827.004 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000457633 Jy ! Component: 100 - total flux cleaned = -0.000493093 Jy ! Component: 150 - total flux cleaned = -0.000525562 Jy ! Component: 200 - total flux cleaned = -0.000570169 Jy ! Total flux subtracted in 200 components = -0.000570169 Jy ! Clean residual min=-0.002074 max=0.001925 Jy/beam ! Clean residual mean=0.000012 rms=0.000505 Jy/beam ! Combined flux in latest and established models = 0.121698 Jy selfcal ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 48 components and 0.121698 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.087429Jy sigma=0.000654 ! Fit after self-cal, rms=0.087487Jy sigma=0.000654 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -3.08492e-05 Jy ! Component: 100 - total flux cleaned = -4.45115e-05 Jy ! Component: 150 - total flux cleaned = -8.3597e-05 Jy ! Component: 200 - total flux cleaned = -0.000107958 Jy ! Total flux subtracted in 200 components = -0.000107958 Jy ! Clean residual min=-0.002058 max=0.001935 Jy/beam ! Clean residual mean=0.000012 rms=0.000504 Jy/beam ! Combined flux in latest and established models = 0.12159 Jy ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 51 components and 0.12159 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.087482Jy sigma=0.000654 ! Fit after self-cal, rms=0.087483Jy sigma=0.000654 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.087483Jy sigma=0.000654 ! Fit after self-cal, rms=0.087706Jy sigma=0.000654 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.704 mas, bmaj=6.169 mas, bpa=-13.65 degrees ! Estimated noise=827.058 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000285819 Jy ! Component: 100 - total flux cleaned = -0.000329797 Jy ! Component: 150 - total flux cleaned = -0.000356391 Jy ! Component: 200 - total flux cleaned = -0.000381369 Jy ! Total flux subtracted in 200 components = -0.000381369 Jy ! Clean residual min=-0.002058 max=0.001923 Jy/beam ! Clean residual mean=0.000012 rms=0.000501 Jy/beam ! Combined flux in latest and established models = 0.121209 Jy selfcal ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 52 components and 0.121209 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.087700Jy sigma=0.000654 ! Fit after self-cal, rms=0.087704Jy sigma=0.000654 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -1.32023e-05 Jy ! Component: 100 - total flux cleaned = -3.70455e-05 Jy ! Component: 150 - total flux cleaned = -5.96621e-05 Jy ! Component: 200 - total flux cleaned = -8.16888e-05 Jy ! Total flux subtracted in 200 components = -8.16888e-05 Jy ! Clean residual min=-0.002057 max=0.001925 Jy/beam ! Clean residual mean=0.000012 rms=0.000500 Jy/beam ! Combined flux in latest and established models = 0.121127 Jy ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 53 components and 0.121127 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.087700Jy sigma=0.000654 ! Fit after self-cal, rms=0.087700Jy sigma=0.000654 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.087700Jy sigma=0.000654 ! Fit after self-cal, rms=0.087797Jy sigma=0.000654 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.707 mas, bmaj=9.21 mas, bpa=-16.6 degrees ! Estimated noise=980.743 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000136356 Jy ! Component: 100 - total flux cleaned = 0.000157486 Jy ! Component: 150 - total flux cleaned = 0.000167502 Jy ! Component: 200 - total flux cleaned = 0.000177054 Jy ! Total flux subtracted in 200 components = 0.000177054 Jy ! Clean residual min=-0.002119 max=0.002652 Jy/beam ! Clean residual mean=0.000022 rms=0.000580 Jy/beam ! Combined flux in latest and established models = 0.121304 Jy selfcal ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 58 components and 0.121304 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.087797Jy sigma=0.000654 ! Fit after self-cal, rms=0.087799Jy sigma=0.000654 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-56.5, -99). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00223648 Jy ! Component: 100 - total flux cleaned = 0.00270747 Jy ! Component: 150 - total flux cleaned = 0.00304705 Jy ! Component: 200 - total flux cleaned = 0.00324126 Jy ! Total flux subtracted in 200 components = 0.00324126 Jy ! Clean residual min=-0.001927 max=0.002060 Jy/beam ! Clean residual mean=0.000015 rms=0.000516 Jy/beam ! Combined flux in latest and established models = 0.124546 Jy ! Performing phase self-cal ! Adding 29 model components to the UV plane model. ! The established model now contains 87 components and 0.124546 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.087756Jy sigma=0.000653 ! Fit after self-cal, rms=0.087746Jy sigma=0.000653 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.705 mas, bmaj=6.178 mas, bpa=-13.59 degrees ! Estimated noise=826.951 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.705 x 6.178 at -13.59 degrees (North through East) ! Clean map min=-0.001933 max=0.1166 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.118 mas, bmaj=5.391 mas, bpa=-14.4 degrees ! Estimated noise=1169.77 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0901889 Jy ! Component: 100 - total flux cleaned = 0.110017 Jy ! Component: 150 - total flux cleaned = 0.11572 Jy ! Component: 200 - total flux cleaned = 0.117504 Jy ! Total flux subtracted in 200 components = 0.117504 Jy ! Clean residual min=-0.002964 max=0.002792 Jy/beam ! Clean residual mean=0.000011 rms=0.000716 Jy/beam ! Combined flux in latest and established models = 0.117504 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 20 model components to the UV plane model. ! The established model now contains 20 components and 0.117504 Jy ! Inverting map and beam ! Estimated beam: bmin=3.705 mas, bmaj=6.178 mas, bpa=-13.59 degrees ! Estimated noise=826.951 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00254478 Jy ! Component: 100 - total flux cleaned = 0.00406348 Jy ! Component: 150 - total flux cleaned = 0.00471609 Jy ! Component: 200 - total flux cleaned = 0.00518847 Jy ! Total flux subtracted in 200 components = 0.00518847 Jy ! Clean residual min=-0.002143 max=0.001877 Jy/beam ! Clean residual mean=0.000010 rms=0.000483 Jy/beam ! Combined flux in latest and established models = 0.122692 Jy ! Adding 35 model components to the UV plane model. ! The established model now contains 50 components and 0.122692 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.707 mas, bmaj=9.21 mas, bpa=-16.6 degrees ! Estimated noise=980.743 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00141985 Jy ! Component: 100 - total flux cleaned = 0.00213985 Jy ! Component: 150 - total flux cleaned = 0.00246433 Jy ! Component: 200 - total flux cleaned = 0.00260597 Jy ! Total flux subtracted in 200 components = 0.00260597 Jy ! Clean residual min=-0.002003 max=0.002025 Jy/beam ! Clean residual mean=0.000013 rms=0.000516 Jy/beam ! Combined flux in latest and established models = 0.125298 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000101965 Jy ! Component: 100 - total flux cleaned = 0.000194792 Jy ! Component: 150 - total flux cleaned = 0.000236873 Jy ! Component: 200 - total flux cleaned = 0.000276303 Jy ! Total flux subtracted in 200 components = 0.000276303 Jy ! Clean residual min=-0.001907 max=0.002041 Jy/beam ! Clean residual mean=0.000012 rms=0.000509 Jy/beam ! Combined flux in latest and established models = 0.125574 Jy ! Adding 58 model components to the UV plane model. ! The established model now contains 108 components and 0.125574 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.705 mas, bmaj=6.178 mas, bpa=-13.59 degrees ! Estimated noise=826.951 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000363754 Jy ! Component: 100 - total flux cleaned = -0.000432812 Jy ! Component: 150 - total flux cleaned = -0.000465864 Jy ! Component: 200 - total flux cleaned = -0.000496671 Jy ! Total flux subtracted in 200 components = -0.000496671 Jy ! Clean residual min=-0.002001 max=0.001823 Jy/beam ! Clean residual mean=0.000006 rms=0.000460 Jy/beam ! Combined flux in latest and established models = 0.125078 Jy selfcal ! Performing phase self-cal ! Adding 22 model components to the UV plane model. ! The established model now contains 127 components and 0.125078 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.087701Jy sigma=0.000653 ! Fit after self-cal, rms=0.087674Jy sigma=0.000653 wmodel J1616+4632_S_2017_03_23_pus_map.mod ! Writing 127 model components to file: J1616+4632_S_2017_03_23_pus_map.mod wobs J1616+4632_S_2017_03_23_pus_uvs.fits ! Writing UV FITS file: J1616+4632_S_2017_03_23_pus_uvs.fits wwins J1616+4632_S_2017_03_23_pus_map.win ! wwins: Wrote 2 windows to J1616+4632_S_2017_03_23_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.000224922 Jy ! Component: 100 - total flux cleaned = -0.000225474 Jy ! Component: 150 - total flux cleaned = -0.000195745 Jy ! Component: 200 - total flux cleaned = -0.000137184 Jy ! Component: 250 - total flux cleaned = -0.000193957 Jy ! Component: 300 - total flux cleaned = -8.33784e-05 Jy ! Component: 350 - total flux cleaned = -2.4623e-06 Jy ! Component: 400 - total flux cleaned = 7.60087e-05 Jy ! Component: 450 - total flux cleaned = 7.56942e-05 Jy ! Component: 500 - total flux cleaned = 7.58069e-05 Jy ! Component: 550 - total flux cleaned = 0.000100623 Jy ! Component: 600 - total flux cleaned = 5.15818e-05 Jy ! Component: 650 - total flux cleaned = 2.74359e-05 Jy ! Component: 700 - total flux cleaned = 2.72332e-05 Jy ! Component: 750 - total flux cleaned = 2.71045e-05 Jy ! Component: 800 - total flux cleaned = 5.04235e-05 Jy ! Component: 850 - total flux cleaned = 2.82919e-05 Jy ! Component: 900 - total flux cleaned = 7.35946e-05 Jy ! Component: 950 - total flux cleaned = 0.000140396 Jy ! Component: 1000 - total flux cleaned = 7.50411e-05 Jy ! Component: 1050 - total flux cleaned = 0.000183079 Jy ! Component: 1100 - total flux cleaned = 0.000268347 Jy ! Component: 1150 - total flux cleaned = 0.00037333 Jy ! Component: 1200 - total flux cleaned = 0.00031092 Jy ! Component: 1250 - total flux cleaned = 0.000476222 Jy ! Component: 1300 - total flux cleaned = 0.000557845 Jy ! Component: 1350 - total flux cleaned = 0.000658678 Jy ! Component: 1400 - total flux cleaned = 0.000698511 Jy ! Component: 1450 - total flux cleaned = 0.000757767 Jy ! Component: 1500 - total flux cleaned = 0.000835638 Jy ! Component: 1550 - total flux cleaned = 0.00087446 Jy ! Component: 1600 - total flux cleaned = 0.00102752 Jy ! Component: 1650 - total flux cleaned = 0.00102738 Jy ! Component: 1700 - total flux cleaned = 0.00114018 Jy ! Component: 1750 - total flux cleaned = 0.00112188 Jy ! Component: 1800 - total flux cleaned = 0.00119572 Jy ! Component: 1850 - total flux cleaned = 0.00132361 Jy ! Component: 1900 - total flux cleaned = 0.00139614 Jy ! Component: 1950 - total flux cleaned = 0.00143216 Jy ! Component: 2000 - total flux cleaned = 0.00152153 Jy ! Component: 2050 - total flux cleaned = 0.00162775 Jy ! Component: 2100 - total flux cleaned = 0.00175054 Jy ! Component: 2150 - total flux cleaned = 0.00188956 Jy ! Component: 2200 - total flux cleaned = 0.00188947 Jy ! Component: 2250 - total flux cleaned = 0.00199254 Jy ! Component: 2300 - total flux cleaned = 0.00211177 Jy ! Component: 2350 - total flux cleaned = 0.00223007 Jy ! Component: 2400 - total flux cleaned = 0.00231386 Jy ! Component: 2450 - total flux cleaned = 0.00236399 Jy ! Component: 2500 - total flux cleaned = 0.00252932 Jy ! Component: 2550 - total flux cleaned = 0.00262773 Jy ! Component: 2600 - total flux cleaned = 0.00272544 Jy ! Component: 2650 - total flux cleaned = 0.00285475 Jy ! Component: 2700 - total flux cleaned = 0.00293502 Jy ! Component: 2750 - total flux cleaned = 0.00298283 Jy ! Component: 2800 - total flux cleaned = 0.00303058 Jy ! Component: 2850 - total flux cleaned = 0.00318801 Jy ! Component: 2900 - total flux cleaned = 0.00326599 Jy ! Component: 2950 - total flux cleaned = 0.00334384 Jy ! Component: 3000 - total flux cleaned = 0.00345186 Jy ! Component: 3050 - total flux cleaned = 0.00348258 Jy ! Component: 3100 - total flux cleaned = 0.00358907 Jy ! Component: 3150 - total flux cleaned = 0.00358898 Jy ! Component: 3200 - total flux cleaned = 0.00361895 Jy ! Component: 3250 - total flux cleaned = 0.00367866 Jy ! Component: 3300 - total flux cleaned = 0.00378248 Jy ! Component: 3350 - total flux cleaned = 0.00381185 Jy ! Component: 3400 - total flux cleaned = 0.00385577 Jy ! Component: 3450 - total flux cleaned = 0.00392843 Jy ! Component: 3500 - total flux cleaned = 0.00391395 Jy ! Component: 3550 - total flux cleaned = 0.00395703 Jy ! Component: 3600 - total flux cleaned = 0.00397128 Jy ! Component: 3650 - total flux cleaned = 0.00401399 Jy ! Component: 3700 - total flux cleaned = 0.00402806 Jy ! Component: 3750 - total flux cleaned = 0.00402813 Jy ! Component: 3800 - total flux cleaned = 0.00405605 Jy ! Component: 3850 - total flux cleaned = 0.00411151 Jy ! Component: 3900 - total flux cleaned = 0.00413909 Jy ! Component: 3950 - total flux cleaned = 0.00420762 Jy ! Component: 4000 - total flux cleaned = 0.00412565 Jy ! Component: 4050 - total flux cleaned = 0.00426149 Jy ! Total flux subtracted in 4096 components = 0.00427499 Jy ! Clean residual min=-0.000733 max=0.000867 Jy/beam ! Clean residual mean=0.000004 rms=0.000245 Jy/beam ! Combined flux in latest and established models = 0.129353 Jy keep ! Adding 296 model components to the UV plane model. ! The established model now contains 423 components and 0.129353 Jy ![Exited script file: muppet] wmap "J1616+4632_S_2017_03_23_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.705 x 6.178 at -13.59 degrees (North through East) ! Clean map min=-0.0014338 max=0.11692 Jy/beam ! Writing clean map to FITS file: J1616+4632_S_2017_03_23_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.116916 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000243654 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.625204 0.625204 1.25041 2.50082 5.00163 10.0033 20.0065 40.013 80.0261 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0007 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.116 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.705 x 6.178 at -13.59 degrees (North through East) ! Clean map min=-0.0014338 max=0.11692 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J1616+4632_S_2017_03_23_pus_uvs.log closed on Mon May 13 10:03:42 2019