! Started logfile: J1615-2430_S_2017_10_21_pus_uvs.log on Sat May 11 21:01:46 2019 obs J1615-2430_S_2017_10_21_pus_uva.fits ! Reading UV FITS file: J1615-2430_S_2017_10_21_pus_uva.fits ! AN table 1: 58 integrations on 36 of 36 possible baselines. ! Apparent sampling: 0.979885 visibilities/baseline/integration-bin. ! Found source: J1615-2430 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 644 lines of history. ! ! Reading 8184 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J1615-2430_S_2017_10_21_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 6 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 64 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 64 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 239 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.688769Jy sigma=0.005400 ! Fit after self-cal, rms=0.603106Jy sigma=0.004609 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.576 mas, bmaj=17.02 mas, bpa=-18.38 degrees ! Estimated noise=1938.59 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.298547 Jy ! Component: 100 - total flux cleaned = 0.383602 Jy ! Total flux subtracted in 100 components = 0.383602 Jy ! Clean residual min=-0.023862 max=0.041659 Jy/beam ! Clean residual mean=-0.000075 rms=0.008887 Jy/beam ! Combined flux in latest and established models = 0.383602 Jy ! Performing phase self-cal ! Adding 31 model components to the UV plane model. ! The established model now contains 31 components and 0.383602 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.154538Jy sigma=0.001135 ! Fit after self-cal, rms=0.154477Jy sigma=0.001135 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.194 mas, bmaj=18.66 mas, bpa=-17.93 degrees ! Estimated noise=1220.18 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0728696 Jy ! Component: 100 - total flux cleaned = 0.113427 Jy ! Component: 150 - total flux cleaned = 0.137823 Jy ! Component: 200 - total flux cleaned = 0.153804 Jy ! Total flux subtracted in 200 components = 0.153804 Jy ! Clean residual min=-0.014822 max=0.014002 Jy/beam ! Clean residual mean=-0.000121 rms=0.004028 Jy/beam ! Combined flux in latest and established models = 0.537406 Jy ! Performing phase self-cal ! Adding 73 model components to the UV plane model. ! The established model now contains 102 components and 0.537406 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.115107Jy sigma=0.000806 ! Fit after self-cal, rms=0.114832Jy sigma=0.000804 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.12 FD 0.93 HN 1.01 KP 1.07 ! LA 0.99 MK 1.01 NL 0.89 OV 0.98 ! PT 0.99 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00 HN 1.08 KP 1.02 ! LA 0.94 MK 0.99 NL 1.00 OV 1.01 ! PT 0.95 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.02 HN 1.05 KP 1.03 ! LA 0.76 MK 1.05 NL 1.19 OV 0.94 ! PT 0.94 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.13 HN 1.07 KP 1.00* ! LA 0.85 MK 1.08 NL 1.00* OV 1.00* ! PT 1.03 ! ! ! Fit before self-cal, rms=0.114832Jy sigma=0.000804 ! Fit after self-cal, rms=0.102291Jy sigma=0.000719 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.247 mas, bmaj=18.91 mas, bpa=-17.99 degrees ! Estimated noise=1215.62 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-8, 7). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00398905 Jy ! Component: 100 - total flux cleaned = 0.00373714 Jy ! Component: 150 - total flux cleaned = 0.00312006 Jy ! Component: 200 - total flux cleaned = 0.00253357 Jy ! Total flux subtracted in 200 components = 0.00253357 Jy ! Clean residual min=-0.003245 max=0.003855 Jy/beam ! Clean residual mean=-0.000000 rms=0.001015 Jy/beam ! Combined flux in latest and established models = 0.53994 Jy ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 121 components and 0.53994 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.101720Jy sigma=0.000716 ! Fit after self-cal, rms=0.101591Jy sigma=0.000715 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.101591Jy sigma=0.000715 ! Fit after self-cal, rms=0.101640Jy sigma=0.000715 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.249 mas, bmaj=18.89 mas, bpa=-17.99 degrees ! Estimated noise=1215.58 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00134569 Jy ! Component: 100 - total flux cleaned = 0.00120508 Jy ! Component: 150 - total flux cleaned = 0.000815553 Jy ! Component: 200 - total flux cleaned = 0.000639962 Jy ! Total flux subtracted in 200 components = 0.000639962 Jy ! Clean residual min=-0.002916 max=0.002930 Jy/beam ! Clean residual mean=-0.000000 rms=0.000830 Jy/beam ! Combined flux in latest and established models = 0.54058 Jy selfcal ! Performing phase self-cal ! Adding 38 model components to the UV plane model. ! The established model now contains 157 components and 0.54058 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.101480Jy sigma=0.000714 ! Fit after self-cal, rms=0.101439Jy sigma=0.000714 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000208046 Jy ! Component: 100 - total flux cleaned = 9.92521e-05 Jy ! Component: 150 - total flux cleaned = -4.26025e-05 Jy ! Component: 200 - total flux cleaned = -0.000216562 Jy ! Total flux subtracted in 200 components = -0.000216562 Jy ! Clean residual min=-0.002761 max=0.002695 Jy/beam ! Clean residual mean=-0.000001 rms=0.000752 Jy/beam ! Combined flux in latest and established models = 0.540363 Jy ! Performing phase self-cal ! Adding 34 model components to the UV plane model. ! The established model now contains 177 components and 0.540363 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.101362Jy sigma=0.000713 ! Fit after self-cal, rms=0.101342Jy sigma=0.000713 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.101342Jy sigma=0.000713 ! Fit after self-cal, rms=0.101500Jy sigma=0.000713 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.251 mas, bmaj=18.89 mas, bpa=-18 degrees ! Estimated noise=1215.65 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000384546 Jy ! Component: 100 - total flux cleaned = 0.000468516 Jy ! Component: 150 - total flux cleaned = 0.000468078 Jy ! Component: 200 - total flux cleaned = 0.000506006 Jy ! Total flux subtracted in 200 components = 0.000506006 Jy ! Clean residual min=-0.002517 max=0.002374 Jy/beam ! Clean residual mean=0.000000 rms=0.000676 Jy/beam ! Combined flux in latest and established models = 0.540869 Jy selfcal ! Performing phase self-cal ! Adding 42 model components to the UV plane model. ! The established model now contains 198 components and 0.540869 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.101447Jy sigma=0.000713 ! Fit after self-cal, rms=0.101439Jy sigma=0.000713 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000239274 Jy ! Component: 100 - total flux cleaned = 0.00034816 Jy ! Component: 150 - total flux cleaned = 0.000315896 Jy ! Component: 200 - total flux cleaned = 0.000286443 Jy ! Total flux subtracted in 200 components = 0.000286443 Jy ! Clean residual min=-0.002407 max=0.002294 Jy/beam ! Clean residual mean=0.000000 rms=0.000644 Jy/beam ! Combined flux in latest and established models = 0.541155 Jy ! Performing phase self-cal ! Adding 41 model components to the UV plane model. ! The established model now contains 213 components and 0.541155 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.101407Jy sigma=0.000713 ! Fit after self-cal, rms=0.101401Jy sigma=0.000713 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.101401Jy sigma=0.000713 ! Fit after self-cal, rms=0.101552Jy sigma=0.000712 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.987 mas, bmaj=28.67 mas, bpa=-5.965 degrees ! Estimated noise=1423.08 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000544997 Jy ! Component: 100 - total flux cleaned = 0.000817427 Jy ! Component: 150 - total flux cleaned = 0.000773284 Jy ! Component: 200 - total flux cleaned = 0.000752795 Jy ! Total flux subtracted in 200 components = 0.000752795 Jy ! Clean residual min=-0.002254 max=0.002347 Jy/beam ! Clean residual mean=-0.000002 rms=0.000639 Jy/beam ! Combined flux in latest and established models = 0.541908 Jy selfcal ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 224 components and 0.541908 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.101535Jy sigma=0.000712 ! Fit after self-cal, rms=0.101532Jy sigma=0.000712 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 4.11492e-05 Jy ! Component: 100 - total flux cleaned = 0.000127483 Jy ! Component: 150 - total flux cleaned = 0.000108825 Jy ! Component: 200 - total flux cleaned = 0.000109156 Jy ! Total flux subtracted in 200 components = 0.000109156 Jy ! Clean residual min=-0.002197 max=0.002268 Jy/beam ! Clean residual mean=-0.000001 rms=0.000618 Jy/beam ! Combined flux in latest and established models = 0.542017 Jy ! Performing phase self-cal ! Adding 23 model components to the UV plane model. ! The established model now contains 236 components and 0.542018 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.101522Jy sigma=0.000712 ! Fit after self-cal, rms=0.101518Jy sigma=0.000712 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.253 mas, bmaj=18.9 mas, bpa=-18.01 degrees ! Estimated noise=1215.94 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.253 x 18.9 at -18.01 degrees (North through East) ! Clean map min=-0.0055645 max=0.40738 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.619 mas, bmaj=17.15 mas, bpa=-18.45 degrees ! Estimated noise=1974.85 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.303773 Jy ! Component: 100 - total flux cleaned = 0.386829 Jy ! Component: 150 - total flux cleaned = 0.435742 Jy ! Component: 200 - total flux cleaned = 0.467785 Jy ! Total flux subtracted in 200 components = 0.467785 Jy ! Clean residual min=-0.010904 max=0.017074 Jy/beam ! Clean residual mean=-0.000013 rms=0.003790 Jy/beam ! Combined flux in latest and established models = 0.467785 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 44 model components to the UV plane model. ! The established model now contains 44 components and 0.467785 Jy ! Inverting map and beam ! Estimated beam: bmin=3.253 mas, bmaj=18.9 mas, bpa=-18.01 degrees ! Estimated noise=1215.94 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.029192 Jy ! Component: 100 - total flux cleaned = 0.045888 Jy ! Component: 150 - total flux cleaned = 0.0560466 Jy ! Component: 200 - total flux cleaned = 0.0624869 Jy ! Total flux subtracted in 200 components = 0.0624869 Jy ! Clean residual min=-0.004353 max=0.003868 Jy/beam ! Clean residual mean=-0.000009 rms=0.001153 Jy/beam ! Combined flux in latest and established models = 0.530272 Jy ! Adding 62 model components to the UV plane model. ! The established model now contains 97 components and 0.530272 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.987 mas, bmaj=28.67 mas, bpa=-5.965 degrees ! Estimated noise=1423.08 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00585161 Jy ! Component: 100 - total flux cleaned = 0.00924991 Jy ! Component: 150 - total flux cleaned = 0.0112441 Jy ! Component: 200 - total flux cleaned = 0.0120515 Jy ! Total flux subtracted in 200 components = 0.0120515 Jy ! Clean residual min=-0.002588 max=0.002215 Jy/beam ! Clean residual mean=0.000001 rms=0.000754 Jy/beam ! Combined flux in latest and established models = 0.542324 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000302413 Jy ! Component: 100 - total flux cleaned = 0.000351874 Jy ! Component: 150 - total flux cleaned = 0.000398616 Jy ! Component: 200 - total flux cleaned = 0.00044176 Jy ! Total flux subtracted in 200 components = 0.00044176 Jy ! Clean residual min=-0.002002 max=0.002107 Jy/beam ! Clean residual mean=0.000001 rms=0.000649 Jy/beam ! Combined flux in latest and established models = 0.542765 Jy ! Adding 65 model components to the UV plane model. ! The established model now contains 158 components and 0.542765 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.253 mas, bmaj=18.9 mas, bpa=-18.01 degrees ! Estimated noise=1215.94 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000180091 Jy ! Component: 100 - total flux cleaned = 0.000251369 Jy ! Component: 150 - total flux cleaned = 0.00025076 Jy ! Component: 200 - total flux cleaned = 0.000305345 Jy ! Total flux subtracted in 200 components = 0.000305345 Jy ! Clean residual min=-0.002881 max=0.002472 Jy/beam ! Clean residual mean=0.000003 rms=0.000663 Jy/beam ! Combined flux in latest and established models = 0.543071 Jy selfcal ! Performing phase self-cal ! Adding 23 model components to the UV plane model. ! The established model now contains 181 components and 0.543071 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.101627Jy sigma=0.000713 ! Fit after self-cal, rms=0.101601Jy sigma=0.000713 wmodel J1615-2430_S_2017_10_21_pus_map.mod ! Writing 181 model components to file: J1615-2430_S_2017_10_21_pus_map.mod wobs J1615-2430_S_2017_10_21_pus_uvs.fits ! Writing UV FITS file: J1615-2430_S_2017_10_21_pus_uvs.fits wwins J1615-2430_S_2017_10_21_pus_map.win ! wwins: Wrote 2 windows to J1615-2430_S_2017_10_21_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.000525704 Jy ! Component: 100 - total flux cleaned = -0.000199751 Jy ! Component: 150 - total flux cleaned = 2.8688e-05 Jy ! Component: 200 - total flux cleaned = 3.02526e-05 Jy ! Component: 250 - total flux cleaned = 0.000165543 Jy ! Component: 300 - total flux cleaned = 0.000361125 Jy ! Component: 350 - total flux cleaned = 0.00048726 Jy ! Component: 400 - total flux cleaned = 0.000729716 Jy ! Component: 450 - total flux cleaned = 0.000875743 Jy ! Component: 500 - total flux cleaned = 0.00104723 Jy ! Component: 550 - total flux cleaned = 0.00110323 Jy ! Component: 600 - total flux cleaned = 0.00113131 Jy ! Component: 650 - total flux cleaned = 0.00121087 Jy ! Component: 700 - total flux cleaned = 0.00121103 Jy ! Component: 750 - total flux cleaned = 0.00118611 Jy ! Component: 800 - total flux cleaned = 0.00121154 Jy ! Component: 850 - total flux cleaned = 0.00116316 Jy ! Component: 900 - total flux cleaned = 0.00113964 Jy ! Component: 950 - total flux cleaned = 0.00102342 Jy ! Component: 1000 - total flux cleaned = 0.000955422 Jy ! Component: 1050 - total flux cleaned = 0.000888543 Jy ! Component: 1100 - total flux cleaned = 0.00077879 Jy ! Component: 1150 - total flux cleaned = 0.000713678 Jy ! Component: 1200 - total flux cleaned = 0.000628721 Jy ! Component: 1250 - total flux cleaned = 0.000587027 Jy ! Component: 1300 - total flux cleaned = 0.000586885 Jy ! Component: 1350 - total flux cleaned = 0.000465143 Jy ! Component: 1400 - total flux cleaned = 0.000425753 Jy ! Component: 1450 - total flux cleaned = 0.000347696 Jy ! Component: 1500 - total flux cleaned = 0.00030952 Jy ! Component: 1550 - total flux cleaned = 0.0002908 Jy ! Component: 1600 - total flux cleaned = 0.000216488 Jy ! Component: 1650 - total flux cleaned = 0.000216816 Jy ! Component: 1700 - total flux cleaned = 0.000198972 Jy ! Component: 1750 - total flux cleaned = 0.00014532 Jy ! Component: 1800 - total flux cleaned = 5.7665e-05 Jy ! Component: 1850 - total flux cleaned = 5.78932e-05 Jy ! Component: 1900 - total flux cleaned = 4.05856e-05 Jy ! Component: 1950 - total flux cleaned = -1.03548e-05 Jy ! Component: 2000 - total flux cleaned = -6.0596e-05 Jy ! Component: 2050 - total flux cleaned = -0.000110265 Jy ! Component: 2100 - total flux cleaned = -0.000159385 Jy ! Component: 2150 - total flux cleaned = -0.000191925 Jy ! Component: 2200 - total flux cleaned = -0.000224108 Jy ! Component: 2250 - total flux cleaned = -0.000303706 Jy ! Component: 2300 - total flux cleaned = -0.000303791 Jy ! Component: 2350 - total flux cleaned = -0.000366193 Jy ! Component: 2400 - total flux cleaned = -0.000443407 Jy ! Component: 2450 - total flux cleaned = -0.000519942 Jy ! Component: 2500 - total flux cleaned = -0.000580465 Jy ! Component: 2550 - total flux cleaned = -0.000640617 Jy ! Component: 2600 - total flux cleaned = -0.000670553 Jy ! Component: 2650 - total flux cleaned = -0.000715195 Jy ! Component: 2700 - total flux cleaned = -0.000759173 Jy ! Component: 2750 - total flux cleaned = -0.000773734 Jy ! Component: 2800 - total flux cleaned = -0.000788374 Jy ! Component: 2850 - total flux cleaned = -0.000773939 Jy ! Component: 2900 - total flux cleaned = -0.000759718 Jy ! Component: 2950 - total flux cleaned = -0.000745492 Jy ! Component: 3000 - total flux cleaned = -0.000759511 Jy ! Component: 3050 - total flux cleaned = -0.000745292 Jy ! Component: 3100 - total flux cleaned = -0.000745299 Jy ! Component: 3150 - total flux cleaned = -0.000731351 Jy ! Component: 3200 - total flux cleaned = -0.000787166 Jy ! Component: 3250 - total flux cleaned = -0.000801107 Jy ! Component: 3300 - total flux cleaned = -0.000801086 Jy ! Component: 3350 - total flux cleaned = -0.000828752 Jy ! Component: 3400 - total flux cleaned = -0.000828711 Jy ! Component: 3450 - total flux cleaned = -0.000856255 Jy ! Component: 3500 - total flux cleaned = -0.000897464 Jy ! Component: 3550 - total flux cleaned = -0.000883837 Jy ! Component: 3600 - total flux cleaned = -0.000965902 Jy ! Component: 3650 - total flux cleaned = -0.00103408 Jy ! Component: 3700 - total flux cleaned = -0.00108871 Jy ! Component: 3750 - total flux cleaned = -0.0011297 Jy ! Component: 3800 - total flux cleaned = -0.00121146 Jy ! Component: 3850 - total flux cleaned = -0.00129319 Jy ! Component: 3900 - total flux cleaned = -0.00136114 Jy ! Component: 3950 - total flux cleaned = -0.0014292 Jy ! Component: 4000 - total flux cleaned = -0.00148364 Jy ! Component: 4050 - total flux cleaned = -0.00156519 Jy ! Total flux subtracted in 4096 components = -0.00163321 Jy ! Clean residual min=-0.000932 max=0.000735 Jy/beam ! Clean residual mean=-0.000007 rms=0.000245 Jy/beam ! Combined flux in latest and established models = 0.541437 Jy keep ! Adding 237 model components to the UV plane model. ! The established model now contains 418 components and 0.541437 Jy ![Exited script file: muppet] wmap "J1615-2430_S_2017_10_21_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.253 x 18.9 at -18.01 degrees (North through East) ! Clean map min=-0.0022623 max=0.41208 Jy/beam ! Writing clean map to FITS file: J1615-2430_S_2017_10_21_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.412082 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000251845 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.183346 0.183346 0.366691 0.733383 1.46677 2.93353 5.86706 11.7341 23.4682 46.9365 93.873 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0007 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.412 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.253 x 18.9 at -18.01 degrees (North through East) ! Clean map min=-0.0022623 max=0.41208 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J1615-2430_S_2017_10_21_pus_uvs.log closed on Sat May 11 21:01:51 2019