! Started logfile: J1615-2430_S_2017_02_24_pus_uvs.log on Sat May 4 11:30:27 2019 obs J1615-2430_S_2017_02_24_pus_uva.fits ! Reading UV FITS file: J1615-2430_S_2017_02_24_pus_uva.fits ! AN table 1: 96 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.978704 visibilities/baseline/integration-bin. ! Found source: J1615-2430 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 823 lines of history. ! ! Reading 16912 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J1615-2430_S_2017_02_24_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 12 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 12 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 12 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 302 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.673570Jy sigma=0.025969 ! Fit after self-cal, rms=0.654799Jy sigma=0.025934 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.693 mas, bmaj=7.096 mas, bpa=-12.37 degrees ! Estimated noise=992.872 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.195896 Jy ! Component: 100 - total flux cleaned = 0.262958 Jy ! Total flux subtracted in 100 components = 0.262958 Jy ! Clean residual min=-0.058401 max=0.064154 Jy/beam ! Clean residual mean=0.000060 rms=0.019818 Jy/beam ! Combined flux in latest and established models = 0.262958 Jy ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 12 components and 0.262958 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.242356Jy sigma=0.006365 ! Fit after self-cal, rms=0.242356Jy sigma=0.006365 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.324 mas, bmaj=8.661 mas, bpa=-9.786 degrees ! Estimated noise=646.393 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0431551 Jy ! Component: 100 - total flux cleaned = 0.0579343 Jy ! Component: 150 - total flux cleaned = 0.0594378 Jy ! Component: 200 - total flux cleaned = 0.0607315 Jy ! Total flux subtracted in 200 components = 0.0607315 Jy ! Clean residual min=-0.060523 max=0.064612 Jy/beam ! Clean residual mean=-0.000131 rms=0.020261 Jy/beam ! Combined flux in latest and established models = 0.32369 Jy ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 31 components and 0.32369 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.211801Jy sigma=0.007718 ! Fit after self-cal, rms=0.211715Jy sigma=0.007718 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.91 FD 0.81 HN 1.09 KP 0.75 ! LA 0.74 MK 0.95 NL 0.79 OV 0.87 ! PT 0.77 SC 1.06 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 0.96 FD 0.75 HN 1.12 KP 0.73 ! LA 0.71 MK 0.95 NL 0.79 OV 0.90 ! PT 0.75 SC 1.14 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 1.04 FD 0.78 HN 1.08 KP 0.80 ! LA 0.78 MK 0.99 NL 0.88 OV 0.83 ! PT 0.75 SC 1.14 ! ! ! Correcting IF 4. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.03 FD 0.87 HN 1.05 KP 1.00* ! LA 36.21 MK 1.01 NL 1.00* OV 0.84 ! PT 0.81 SC 1.00* ! ! ! Fit before self-cal, rms=0.211715Jy sigma=0.007718 ! Fit after self-cal, rms=5.117668Jy sigma=0.000904 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.327 mas, bmaj=8.701 mas, bpa=-7.818 degrees ! Estimated noise=658.982 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-4.5, 11.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.022682 Jy ! Component: 100 - total flux cleaned = 0.0293351 Jy ! Component: 150 - total flux cleaned = 0.0316827 Jy ! Component: 200 - total flux cleaned = 0.0321526 Jy ! Total flux subtracted in 200 components = 0.0321526 Jy ! Clean residual min=-0.009651 max=0.010704 Jy/beam ! Clean residual mean=0.000009 rms=0.002605 Jy/beam ! Combined flux in latest and established models = 0.355843 Jy ! Performing phase self-cal ! Adding 22 model components to the UV plane model. ! The established model now contains 52 components and 0.355843 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=5.115784Jy sigma=0.000878 ! Fit after self-cal, rms=5.116007Jy sigma=0.000868 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=5.116007Jy sigma=0.000868 ! Fit after self-cal, rms=5.926670Jy sigma=0.000842 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.279 mas, bmaj=8.592 mas, bpa=-7.71 degrees ! Estimated noise=673.456 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0132332 Jy ! Component: 100 - total flux cleaned = 0.0203634 Jy ! Component: 150 - total flux cleaned = 0.0237816 Jy ! Component: 200 - total flux cleaned = 0.024667 Jy ! Total flux subtracted in 200 components = 0.024667 Jy ! Clean residual min=-0.008268 max=0.007183 Jy/beam ! Clean residual mean=-0.000017 rms=0.002276 Jy/beam ! Combined flux in latest and established models = 0.38051 Jy selfcal ! Performing phase self-cal ! Adding 26 model components to the UV plane model. ! The established model now contains 73 components and 0.38051 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=5.924997Jy sigma=0.000840 ! Fit after self-cal, rms=5.925004Jy sigma=0.000839 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00380781 Jy ! Component: 100 - total flux cleaned = 0.00421715 Jy ! Component: 150 - total flux cleaned = 0.004221 Jy ! Component: 200 - total flux cleaned = 0.00422166 Jy ! Total flux subtracted in 200 components = 0.00422166 Jy ! Clean residual min=-0.007690 max=0.006915 Jy/beam ! Clean residual mean=-0.000016 rms=0.002194 Jy/beam ! Combined flux in latest and established models = 0.384731 Jy ! Performing phase self-cal ! Adding 27 model components to the UV plane model. ! The established model now contains 86 components and 0.384731 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=5.924767Jy sigma=0.000839 ! Fit after self-cal, rms=5.924777Jy sigma=0.000838 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=5.924777Jy sigma=0.000838 ! Fit after self-cal, rms=5.605744Jy sigma=0.000731 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.265 mas, bmaj=8.561 mas, bpa=-7.649 degrees ! Estimated noise=677.573 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00613828 Jy ! Component: 100 - total flux cleaned = 0.00876539 Jy ! Component: 150 - total flux cleaned = 0.00905493 Jy ! Component: 200 - total flux cleaned = 0.00923002 Jy ! Total flux subtracted in 200 components = 0.00923002 Jy ! Clean residual min=-0.004432 max=0.004821 Jy/beam ! Clean residual mean=0.000025 rms=0.001155 Jy/beam ! Combined flux in latest and established models = 0.393961 Jy selfcal ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 97 components and 0.393961 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=5.605276Jy sigma=0.000729 ! Fit after self-cal, rms=5.605287Jy sigma=0.000728 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00191256 Jy ! Component: 100 - total flux cleaned = 0.00199961 Jy ! Component: 150 - total flux cleaned = 0.00200165 Jy ! Component: 200 - total flux cleaned = 0.00212624 Jy ! Total flux subtracted in 200 components = 0.00212624 Jy ! Clean residual min=-0.004139 max=0.004231 Jy/beam ! Clean residual mean=0.000027 rms=0.001104 Jy/beam ! Combined flux in latest and established models = 0.396087 Jy ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 103 components and 0.396087 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=5.605174Jy sigma=0.000728 ! Fit after self-cal, rms=5.605182Jy sigma=0.000728 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=5.605182Jy sigma=0.000728 ! Fit after self-cal, rms=5.711350Jy sigma=0.000726 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.012 mas, bmaj=19.1 mas, bpa=-1.143 degrees ! Estimated noise=805.951 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00552755 Jy ! Component: 100 - total flux cleaned = 0.00791186 Jy ! Component: 150 - total flux cleaned = 0.00922721 Jy ! Component: 200 - total flux cleaned = 0.0095158 Jy ! Total flux subtracted in 200 components = 0.0095158 Jy ! Clean residual min=-0.005098 max=0.004642 Jy/beam ! Clean residual mean=0.000031 rms=0.001649 Jy/beam ! Combined flux in latest and established models = 0.405603 Jy selfcal ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 120 components and 0.405603 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=5.710886Jy sigma=0.000726 ! Fit after self-cal, rms=5.710895Jy sigma=0.000726 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00122017 Jy ! Component: 100 - total flux cleaned = 0.001344 Jy ! Component: 150 - total flux cleaned = 0.00130743 Jy ! Component: 200 - total flux cleaned = 0.00124018 Jy ! Total flux subtracted in 200 components = 0.00124018 Jy ! Clean residual min=-0.005126 max=0.004559 Jy/beam ! Clean residual mean=0.000034 rms=0.001616 Jy/beam ! Combined flux in latest and established models = 0.406843 Jy ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 125 components and 0.406843 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=5.710832Jy sigma=0.000726 ! Fit after self-cal, rms=5.710835Jy sigma=0.000726 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.255 mas, bmaj=8.537 mas, bpa=-7.565 degrees ! Estimated noise=682.968 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.255 x 8.537 at -7.565 degrees (North through East) ! Clean map min=-0.0038842 max=0.28575 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.699 mas, bmaj=7.215 mas, bpa=-7.324 degrees ! Estimated noise=1124.5 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.219372 Jy ! Component: 100 - total flux cleaned = 0.290151 Jy ! Component: 150 - total flux cleaned = 0.327803 Jy ! Component: 200 - total flux cleaned = 0.351524 Jy ! Total flux subtracted in 200 components = 0.351524 Jy ! Clean residual min=-0.007127 max=0.012769 Jy/beam ! Clean residual mean=0.000048 rms=0.002072 Jy/beam ! Combined flux in latest and established models = 0.351524 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 38 model components to the UV plane model. ! The established model now contains 38 components and 0.351524 Jy ! Inverting map and beam ! Estimated beam: bmin=3.255 mas, bmaj=8.537 mas, bpa=-7.565 degrees ! Estimated noise=682.968 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0223925 Jy ! Component: 100 - total flux cleaned = 0.0357763 Jy ! Component: 150 - total flux cleaned = 0.0441483 Jy ! Component: 200 - total flux cleaned = 0.0495786 Jy ! Total flux subtracted in 200 components = 0.0495786 Jy ! Clean residual min=-0.004211 max=0.004433 Jy/beam ! Clean residual mean=0.000026 rms=0.001170 Jy/beam ! Combined flux in latest and established models = 0.401102 Jy ! Adding 58 model components to the UV plane model. ! The established model now contains 88 components and 0.401102 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.012 mas, bmaj=19.1 mas, bpa=-1.143 degrees ! Estimated noise=805.951 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00479822 Jy ! Component: 100 - total flux cleaned = 0.00567603 Jy ! Component: 150 - total flux cleaned = 0.00623532 Jy ! Component: 200 - total flux cleaned = 0.00637294 Jy ! Total flux subtracted in 200 components = 0.00637294 Jy ! Clean residual min=-0.004829 max=0.004837 Jy/beam ! Clean residual mean=0.000042 rms=0.001641 Jy/beam ! Combined flux in latest and established models = 0.407475 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 5.59109e-05 Jy ! Component: 100 - total flux cleaned = 0.000103539 Jy ! Component: 150 - total flux cleaned = 5.76665e-05 Jy ! Component: 200 - total flux cleaned = 0.000101287 Jy ! Total flux subtracted in 200 components = 0.000101287 Jy ! Clean residual min=-0.004892 max=0.004626 Jy/beam ! Clean residual mean=0.000039 rms=0.001628 Jy/beam ! Combined flux in latest and established models = 0.407576 Jy ! Adding 36 model components to the UV plane model. ! The established model now contains 120 components and 0.407576 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.255 mas, bmaj=8.537 mas, bpa=-7.565 degrees ! Estimated noise=682.968 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000754755 Jy ! Component: 100 - total flux cleaned = -0.000683899 Jy ! Component: 150 - total flux cleaned = -0.000682109 Jy ! Component: 200 - total flux cleaned = -0.000617779 Jy ! Total flux subtracted in 200 components = -0.000617779 Jy ! Clean residual min=-0.003523 max=0.004175 Jy/beam ! Clean residual mean=0.000019 rms=0.001048 Jy/beam ! Combined flux in latest and established models = 0.406959 Jy selfcal ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 135 components and 0.406959 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=5.710847Jy sigma=0.000725 ! Fit after self-cal, rms=5.710858Jy sigma=0.000725 wmodel J1615-2430_S_2017_02_24_pus_map.mod ! Writing 135 model components to file: J1615-2430_S_2017_02_24_pus_map.mod wobs J1615-2430_S_2017_02_24_pus_uvs.fits ! Writing UV FITS file: J1615-2430_S_2017_02_24_pus_uvs.fits wwins J1615-2430_S_2017_02_24_pus_map.win ! wwins: Wrote 2 windows to J1615-2430_S_2017_02_24_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.00056571 Jy ! Component: 100 - total flux cleaned = -0.000827125 Jy ! Component: 150 - total flux cleaned = -0.000951667 Jy ! Component: 200 - total flux cleaned = -0.00130616 Jy ! Component: 250 - total flux cleaned = -0.00164864 Jy ! Component: 300 - total flux cleaned = -0.001926 Jy ! Component: 350 - total flux cleaned = -0.00203508 Jy ! Component: 400 - total flux cleaned = -0.00203565 Jy ! Component: 450 - total flux cleaned = -0.00198383 Jy ! Component: 500 - total flux cleaned = -0.00188463 Jy ! Component: 550 - total flux cleaned = -0.00188536 Jy ! Component: 600 - total flux cleaned = -0.0018856 Jy ! Component: 650 - total flux cleaned = -0.00193253 Jy ! Component: 700 - total flux cleaned = -0.00188555 Jy ! Component: 750 - total flux cleaned = -0.00193198 Jy ! Component: 800 - total flux cleaned = -0.00193167 Jy ! Component: 850 - total flux cleaned = -0.00188756 Jy ! Component: 900 - total flux cleaned = -0.00171448 Jy ! Component: 950 - total flux cleaned = -0.00154365 Jy ! Component: 1000 - total flux cleaned = -0.00133324 Jy ! Component: 1050 - total flux cleaned = -0.0010434 Jy ! Component: 1100 - total flux cleaned = -0.000962284 Jy ! Component: 1150 - total flux cleaned = -0.000841281 Jy ! Component: 1200 - total flux cleaned = -0.000603648 Jy ! Component: 1250 - total flux cleaned = -0.000407799 Jy ! Component: 1300 - total flux cleaned = -0.000214684 Jy ! Component: 1350 - total flux cleaned = -2.39613e-05 Jy ! Component: 1400 - total flux cleaned = 5.14233e-05 Jy ! Component: 1450 - total flux cleaned = 0.000312283 Jy ! Component: 1500 - total flux cleaned = 0.00045915 Jy ! Component: 1550 - total flux cleaned = 0.000604801 Jy ! Component: 1600 - total flux cleaned = 0.000749035 Jy ! Component: 1650 - total flux cleaned = 0.000891528 Jy ! Component: 1700 - total flux cleaned = 0.000996894 Jy ! Component: 1750 - total flux cleaned = 0.00106667 Jy ! Component: 1800 - total flux cleaned = 0.00117049 Jy ! Component: 1850 - total flux cleaned = 0.00117067 Jy ! Component: 1900 - total flux cleaned = 0.00130649 Jy ! Component: 1950 - total flux cleaned = 0.00144096 Jy ! Component: 2000 - total flux cleaned = 0.00154083 Jy ! Component: 2050 - total flux cleaned = 0.00157367 Jy ! Component: 2100 - total flux cleaned = 0.00170424 Jy ! Component: 2150 - total flux cleaned = 0.00173639 Jy ! Component: 2200 - total flux cleaned = 0.00170407 Jy ! Component: 2250 - total flux cleaned = 0.00176786 Jy ! Component: 2300 - total flux cleaned = 0.00189434 Jy ! Component: 2350 - total flux cleaned = 0.00189449 Jy ! Component: 2400 - total flux cleaned = 0.00198802 Jy ! Component: 2450 - total flux cleaned = 0.00204944 Jy ! Component: 2500 - total flux cleaned = 0.00207995 Jy ! Component: 2550 - total flux cleaned = 0.00201926 Jy ! Component: 2600 - total flux cleaned = 0.00204954 Jy ! Component: 2650 - total flux cleaned = 0.00207964 Jy ! Component: 2700 - total flux cleaned = 0.00202033 Jy ! Component: 2750 - total flux cleaned = 0.00210865 Jy ! Component: 2800 - total flux cleaned = 0.0020791 Jy ! Component: 2850 - total flux cleaned = 0.00210816 Jy ! Component: 2900 - total flux cleaned = 0.00207916 Jy ! Component: 2950 - total flux cleaned = 0.00210772 Jy ! Component: 3000 - total flux cleaned = 0.00213614 Jy ! Component: 3050 - total flux cleaned = 0.00207953 Jy ! Component: 3100 - total flux cleaned = 0.00213582 Jy ! Component: 3150 - total flux cleaned = 0.00219185 Jy ! Component: 3200 - total flux cleaned = 0.00216408 Jy ! Component: 3250 - total flux cleaned = 0.00224663 Jy ! Component: 3300 - total flux cleaned = 0.00230146 Jy ! Component: 3350 - total flux cleaned = 0.00224723 Jy ! Component: 3400 - total flux cleaned = 0.00235555 Jy ! Component: 3450 - total flux cleaned = 0.00243634 Jy ! Component: 3500 - total flux cleaned = 0.0024365 Jy ! Component: 3550 - total flux cleaned = 0.00251639 Jy ! Component: 3600 - total flux cleaned = 0.00251664 Jy ! Component: 3650 - total flux cleaned = 0.00256918 Jy ! Component: 3700 - total flux cleaned = 0.00256915 Jy ! Component: 3750 - total flux cleaned = 0.00264715 Jy ! Component: 3800 - total flux cleaned = 0.0026472 Jy ! Component: 3850 - total flux cleaned = 0.00267317 Jy ! Component: 3900 - total flux cleaned = 0.00267318 Jy ! Component: 3950 - total flux cleaned = 0.00264776 Jy ! Component: 4000 - total flux cleaned = 0.00262246 Jy ! Component: 4050 - total flux cleaned = 0.00264775 Jy ! Total flux subtracted in 4096 components = 0.00264771 Jy ! Clean residual min=-0.001423 max=0.001412 Jy/beam ! Clean residual mean=-0.000003 rms=0.000506 Jy/beam ! Combined flux in latest and established models = 0.409606 Jy keep ! Adding 334 model components to the UV plane model. ! The established model now contains 469 components and 0.409606 Jy ![Exited script file: muppet] wmap "J1615-2430_S_2017_02_24_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.255 x 8.537 at -7.565 degrees (North through East) ! Clean map min=-0.0028513 max=0.28398 Jy/beam ! Writing clean map to FITS file: J1615-2430_S_2017_02_24_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.283985 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000497052 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.525084 0.525084 1.05017 2.10033 4.20067 8.40134 16.8027 33.6054 67.2107 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0014 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.283 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.255 x 8.537 at -7.565 degrees (North through East) ! Clean map min=-0.0028513 max=0.28398 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J1615-2430_S_2017_02_24_pus_uvs.log closed on Sat May 4 11:30:32 2019