! Started logfile: J1609-0547_S_2017_05_01_pus_uvs.log on Wed May 1 18:39:59 2019 obs J1609-0547_S_2017_05_01_pus_uva.fits ! Reading UV FITS file: J1609-0547_S_2017_05_01_pus_uva.fits ! AN table 1: 143 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.952292 visibilities/baseline/integration-bin. ! Found source: J1609-0547 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 788 lines of history. ! ! Reading 24512 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J1609-0547_S_2017_05_01_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 37 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 37 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 37 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 685 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.898846Jy sigma=0.296889 ! Fit after self-cal, rms=0.884523Jy sigma=0.296886 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.624 mas, bmaj=8.117 mas, bpa=-6.237 degrees ! Estimated noise=373.604 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.028235 Jy ! Component: 100 - total flux cleaned = 0.0268025 Jy ! Total flux subtracted in 100 components = 0.0268025 Jy ! Clean residual min=-0.015159 max=0.012664 Jy/beam ! Clean residual mean=-0.000011 rms=0.004641 Jy/beam ! Combined flux in latest and established models = 0.0268025 Jy ! Performing phase self-cal ! Adding 4 model components to the UV plane model. ! The established model now contains 4 components and 0.0268025 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.181281Jy sigma=0.008164 ! Fit after self-cal, rms=0.181267Jy sigma=0.008134 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=4.729 mas, bmaj=9.418 mas, bpa=-3.08 degrees ! Estimated noise=217.935 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00619365 Jy ! Component: 100 - total flux cleaned = 0.00664236 Jy ! Component: 150 - total flux cleaned = 0.00700202 Jy ! Component: 200 - total flux cleaned = 0.00715606 Jy ! Total flux subtracted in 200 components = 0.00715606 Jy ! Clean residual min=-0.016534 max=0.011657 Jy/beam ! Clean residual mean=-0.000043 rms=0.004767 Jy/beam ! Combined flux in latest and established models = 0.0339585 Jy ! Performing phase self-cal ! Adding 8 model components to the UV plane model. ! The established model now contains 8 components and 0.0339585 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.177635Jy sigma=0.007873 ! Fit after self-cal, rms=0.177603Jy sigma=0.007871 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.42 FD 0.34 HN 0.74 KP 0.48 ! LA 0.45 MK 0.91 NL 0.49 OV 5.19 ! PT 0.46 SC 0.98 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 0.43 FD 0.35 HN 0.82 KP 0.46 ! LA 0.42 MK 0.91 NL 0.54 OV 2.00 ! PT 0.44 SC 1.05 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 15.88 FD 0.43 HN 1.05 KP 0.49 ! LA 16.64 MK 0.88 NL 0.61 OV 3.79 ! PT 7.07 SC 1.17 ! ! ! Correcting IF 4. ! A total of 6 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 18.76 FD 0.48 HN 0.89 KP 1.00* ! LA 10.07 MK 1.26 NL 1.00* OV 1.00* ! PT 3.06 SC 1.00* ! ! ! Fit before self-cal, rms=0.177603Jy sigma=0.007871 ! Fit after self-cal, rms=4.557618Jy sigma=0.000877 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.916 mas, bmaj=9.123 mas, bpa=-4.989 degrees ! Estimated noise=337.364 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0144903 Jy ! Component: 100 - total flux cleaned = 0.0197956 Jy ! Component: 150 - total flux cleaned = 0.0224327 Jy ! Component: 200 - total flux cleaned = 0.0229639 Jy ! Total flux subtracted in 200 components = 0.0229639 Jy ! Clean residual min=-0.009051 max=0.006062 Jy/beam ! Clean residual mean=-0.000006 rms=0.001745 Jy/beam ! Combined flux in latest and established models = 0.0569224 Jy ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 19 components and 0.0569224 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=4.554469Jy sigma=0.000946 ! Fit after self-cal, rms=4.555212Jy sigma=0.000925 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=4.555212Jy sigma=0.000925 ! Fit after self-cal, rms=13.086638Jy sigma=0.000764 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.802 mas, bmaj=9.081 mas, bpa=-6.121 degrees ! Estimated noise=400.164 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0101115 Jy ! Component: 100 - total flux cleaned = 0.0129682 Jy ! Component: 150 - total flux cleaned = 0.0133017 Jy ! Component: 200 - total flux cleaned = 0.013353 Jy ! Total flux subtracted in 200 components = 0.013353 Jy ! Clean residual min=-0.004933 max=0.006363 Jy/beam ! Clean residual mean=0.000015 rms=0.001342 Jy/beam ! Combined flux in latest and established models = 0.0702754 Jy selfcal ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 26 components and 0.0702754 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=13.085886Jy sigma=0.000780 ! Fit after self-cal, rms=13.085865Jy sigma=0.000774 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-88, -114.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00483847 Jy ! Component: 100 - total flux cleaned = 0.00545364 Jy ! Component: 150 - total flux cleaned = 0.0056219 Jy ! Component: 200 - total flux cleaned = 0.00562089 Jy ! Total flux subtracted in 200 components = 0.00562089 Jy ! Clean residual min=-0.005144 max=0.006049 Jy/beam ! Clean residual mean=0.000009 rms=0.001326 Jy/beam ! Combined flux in latest and established models = 0.0758962 Jy ! Performing phase self-cal ! Adding 23 model components to the UV plane model. ! The established model now contains 48 components and 0.0758962 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=13.085443Jy sigma=0.000777 ! Fit after self-cal, rms=13.085457Jy sigma=0.000776 ! Inverting map ! Added new window around map position (62.5, -88.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00266954 Jy ! Component: 100 - total flux cleaned = 0.00355996 Jy ! Component: 150 - total flux cleaned = 0.0035472 Jy ! Component: 200 - total flux cleaned = 0.00345165 Jy ! Total flux subtracted in 200 components = 0.00345165 Jy ! Clean residual min=-0.005188 max=0.005566 Jy/beam ! Clean residual mean=0.000011 rms=0.001324 Jy/beam ! Combined flux in latest and established models = 0.0793479 Jy ! Performing phase self-cal ! Adding 27 model components to the UV plane model. ! The established model now contains 73 components and 0.0793479 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=13.085145Jy sigma=0.000779 ! Fit after self-cal, rms=13.085114Jy sigma=0.000778 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=13.085114Jy sigma=0.000778 ! Fit after self-cal, rms=17.124434Jy sigma=0.000674 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.717 mas, bmaj=8.91 mas, bpa=-5.806 degrees ! Estimated noise=425.652 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00136871 Jy ! Component: 100 - total flux cleaned = 0.00117217 Jy ! Component: 150 - total flux cleaned = 0.000943344 Jy ! Component: 200 - total flux cleaned = 0.000674676 Jy ! Total flux subtracted in 200 components = 0.000674676 Jy ! Clean residual min=-0.002475 max=0.002389 Jy/beam ! Clean residual mean=0.000007 rms=0.000576 Jy/beam ! Combined flux in latest and established models = 0.0800226 Jy selfcal ! Performing phase self-cal ! Adding 25 model components to the UV plane model. ! The established model now contains 94 components and 0.0800226 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=17.124378Jy sigma=0.000672 ! Fit after self-cal, rms=17.124409Jy sigma=0.000669 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (7, 2.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000664516 Jy ! Component: 100 - total flux cleaned = 0.000385675 Jy ! Component: 150 - total flux cleaned = -0.00017871 Jy ! Component: 200 - total flux cleaned = -0.000521942 Jy ! Total flux subtracted in 200 components = -0.000521942 Jy ! Clean residual min=-0.002107 max=0.001903 Jy/beam ! Clean residual mean=0.000007 rms=0.000541 Jy/beam ! Combined flux in latest and established models = 0.0795006 Jy ! Performing phase self-cal ! Adding 28 model components to the UV plane model. ! The established model now contains 114 components and 0.0795007 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=17.124388Jy sigma=0.000668 ! Fit after self-cal, rms=17.124363Jy sigma=0.000667 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=17.124363Jy sigma=0.000667 ! Fit after self-cal, rms=19.924454Jy sigma=0.000666 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.159 mas, bmaj=13.97 mas, bpa=3.493 degrees ! Estimated noise=482.849 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0020506 Jy ! Component: 100 - total flux cleaned = 0.00189193 Jy ! Component: 150 - total flux cleaned = 0.00201671 Jy ! Component: 200 - total flux cleaned = 0.00201806 Jy ! Total flux subtracted in 200 components = 0.00201806 Jy ! Clean residual min=-0.002150 max=0.002868 Jy/beam ! Clean residual mean=0.000012 rms=0.000637 Jy/beam ! Combined flux in latest and established models = 0.0815187 Jy selfcal ! Performing phase self-cal ! Adding 28 model components to the UV plane model. ! The established model now contains 132 components and 0.0815187 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=19.924397Jy sigma=0.000666 ! Fit after self-cal, rms=19.924391Jy sigma=0.000666 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (127.5, 32.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00195593 Jy ! Component: 100 - total flux cleaned = 0.00200048 Jy ! Component: 150 - total flux cleaned = 0.00214092 Jy ! Component: 200 - total flux cleaned = 0.00222283 Jy ! Total flux subtracted in 200 components = 0.00222283 Jy ! Clean residual min=-0.002117 max=0.002084 Jy/beam ! Clean residual mean=0.000005 rms=0.000571 Jy/beam ! Combined flux in latest and established models = 0.0837415 Jy ! Performing phase self-cal ! Adding 46 model components to the UV plane model. ! The established model now contains 167 components and 0.0837415 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=19.924366Jy sigma=0.000666 ! Fit after self-cal, rms=19.924360Jy sigma=0.000666 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.688 mas, bmaj=8.856 mas, bpa=-5.716 degrees ! Estimated noise=441.228 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.688 x 8.856 at -5.716 degrees (North through East) ! Clean map min=-0.0020154 max=0.072386 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.932 mas, bmaj=7.512 mas, bpa=-5.656 degrees ! Estimated noise=735.937 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0626323 Jy ! Component: 100 - total flux cleaned = 0.0739258 Jy ! Component: 150 - total flux cleaned = 0.0766112 Jy ! Component: 200 - total flux cleaned = 0.0779039 Jy ! Total flux subtracted in 200 components = 0.0779039 Jy ! Clean residual min=-0.003068 max=0.004353 Jy/beam ! Clean residual mean=0.000004 rms=0.000790 Jy/beam ! Combined flux in latest and established models = 0.0779039 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 15 model components to the UV plane model. ! The established model now contains 15 components and 0.0779039 Jy ! Inverting map and beam ! Estimated beam: bmin=3.688 mas, bmaj=8.856 mas, bpa=-5.716 degrees ! Estimated noise=441.228 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-7, 0). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00226033 Jy ! Component: 100 - total flux cleaned = 0.00333902 Jy ! Component: 150 - total flux cleaned = 0.00393303 Jy ! Component: 200 - total flux cleaned = 0.00423773 Jy ! Total flux subtracted in 200 components = 0.00423773 Jy ! Clean residual min=-0.002090 max=0.002404 Jy/beam ! Clean residual mean=0.000005 rms=0.000522 Jy/beam ! Combined flux in latest and established models = 0.0821416 Jy ! Adding 34 model components to the UV plane model. ! The established model now contains 46 components and 0.0821417 Jy ! Inverting map ! Added new window around map position (0, 13). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00108642 Jy ! Component: 100 - total flux cleaned = 0.00135427 Jy ! Component: 150 - total flux cleaned = 0.00147382 Jy ! Component: 200 - total flux cleaned = 0.00141662 Jy ! Total flux subtracted in 200 components = 0.00141662 Jy ! Clean residual min=-0.001997 max=0.001854 Jy/beam ! Clean residual mean=0.000005 rms=0.000484 Jy/beam ! Combined flux in latest and established models = 0.0835583 Jy ! Adding 30 model components to the UV plane model. ! The established model now contains 63 components and 0.0835583 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.159 mas, bmaj=13.97 mas, bpa=3.493 degrees ! Estimated noise=482.849 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000917592 Jy ! Component: 100 - total flux cleaned = 0.00132391 Jy ! Component: 150 - total flux cleaned = 0.00149031 Jy ! Component: 200 - total flux cleaned = 0.00159931 Jy ! Total flux subtracted in 200 components = 0.00159931 Jy ! Clean residual min=-0.002180 max=0.002340 Jy/beam ! Clean residual mean=0.000005 rms=0.000524 Jy/beam ! Combined flux in latest and established models = 0.0851576 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-128, -23.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00193298 Jy ! Component: 100 - total flux cleaned = 0.0027289 Jy ! Component: 150 - total flux cleaned = 0.00310714 Jy ! Component: 200 - total flux cleaned = 0.00332987 Jy ! Total flux subtracted in 200 components = 0.00332987 Jy ! Clean residual min=-0.001898 max=0.001690 Jy/beam ! Clean residual mean=-0.000002 rms=0.000487 Jy/beam ! Combined flux in latest and established models = 0.0884874 Jy ! Adding 89 model components to the UV plane model. ! The established model now contains 149 components and 0.0884874 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.688 mas, bmaj=8.856 mas, bpa=-5.716 degrees ! Estimated noise=441.228 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000219783 Jy ! Component: 100 - total flux cleaned = -0.000364794 Jy ! Component: 150 - total flux cleaned = -0.000455084 Jy ! Component: 200 - total flux cleaned = -0.00053931 Jy ! Total flux subtracted in 200 components = -0.00053931 Jy ! Clean residual min=-0.002004 max=0.001679 Jy/beam ! Clean residual mean=0.000000 rms=0.000448 Jy/beam ! Combined flux in latest and established models = 0.0879481 Jy selfcal ! Performing phase self-cal ! Adding 39 model components to the UV plane model. ! The established model now contains 175 components and 0.0879481 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=19.924328Jy sigma=0.000665 ! Fit after self-cal, rms=19.924345Jy sigma=0.000665 wmodel J1609-0547_S_2017_05_01_pus_map.mod ! Writing 175 model components to file: J1609-0547_S_2017_05_01_pus_map.mod wobs J1609-0547_S_2017_05_01_pus_uvs.fits ! Writing UV FITS file: J1609-0547_S_2017_05_01_pus_uvs.fits wwins J1609-0547_S_2017_05_01_pus_map.win ! wwins: Wrote 8 windows to J1609-0547_S_2017_05_01_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.00082964 Jy ! Component: 100 - total flux cleaned = -0.00121135 Jy ! Component: 150 - total flux cleaned = -0.00121101 Jy ! Component: 200 - total flux cleaned = -0.00115297 Jy ! Component: 250 - total flux cleaned = -0.000984201 Jy ! Component: 300 - total flux cleaned = -0.00098413 Jy ! Component: 350 - total flux cleaned = -0.000957109 Jy ! Component: 400 - total flux cleaned = -0.000852305 Jy ! Component: 450 - total flux cleaned = -0.000775681 Jy ! Component: 500 - total flux cleaned = -0.000801349 Jy ! Component: 550 - total flux cleaned = -0.000702263 Jy ! Component: 600 - total flux cleaned = -0.000727142 Jy ! Component: 650 - total flux cleaned = -0.000727143 Jy ! Component: 700 - total flux cleaned = -0.000703194 Jy ! Component: 750 - total flux cleaned = -0.00067998 Jy ! Component: 800 - total flux cleaned = -0.000657239 Jy ! Component: 850 - total flux cleaned = -0.000634682 Jy ! Component: 900 - total flux cleaned = -0.000657519 Jy ! Component: 950 - total flux cleaned = -0.000589935 Jy ! Component: 1000 - total flux cleaned = -0.000656773 Jy ! Component: 1050 - total flux cleaned = -0.000612411 Jy ! Component: 1100 - total flux cleaned = -0.00067832 Jy ! Component: 1150 - total flux cleaned = -0.000569329 Jy ! Component: 1200 - total flux cleaned = -0.00061276 Jy ! Component: 1250 - total flux cleaned = -0.000612803 Jy ! Component: 1300 - total flux cleaned = -0.000655621 Jy ! Component: 1350 - total flux cleaned = -0.000655775 Jy ! Component: 1400 - total flux cleaned = -0.000739919 Jy ! Component: 1450 - total flux cleaned = -0.000698005 Jy ! Component: 1500 - total flux cleaned = -0.00067736 Jy ! Component: 1550 - total flux cleaned = -0.000780589 Jy ! Component: 1600 - total flux cleaned = -0.000698533 Jy ! Component: 1650 - total flux cleaned = -0.000759895 Jy ! Component: 1700 - total flux cleaned = -0.000759899 Jy ! Component: 1750 - total flux cleaned = -0.000739588 Jy ! Component: 1800 - total flux cleaned = -0.000779909 Jy ! Component: 1850 - total flux cleaned = -0.000859753 Jy ! Component: 1900 - total flux cleaned = -0.000780141 Jy ! Component: 1950 - total flux cleaned = -0.000819577 Jy ! Component: 2000 - total flux cleaned = -0.000799764 Jy ! Component: 2050 - total flux cleaned = -0.000799652 Jy ! Component: 2100 - total flux cleaned = -0.000799742 Jy ! Component: 2150 - total flux cleaned = -0.000761005 Jy ! Component: 2200 - total flux cleaned = -0.000799711 Jy ! Component: 2250 - total flux cleaned = -0.000818905 Jy ! Component: 2300 - total flux cleaned = -0.000818832 Jy ! Component: 2350 - total flux cleaned = -0.000799716 Jy ! Component: 2400 - total flux cleaned = -0.00083759 Jy ! Component: 2450 - total flux cleaned = -0.000856384 Jy ! Component: 2500 - total flux cleaned = -0.000818828 Jy ! Component: 2550 - total flux cleaned = -0.000875098 Jy ! Component: 2600 - total flux cleaned = -0.000856454 Jy ! Component: 2650 - total flux cleaned = -0.00093081 Jy ! Component: 2700 - total flux cleaned = -0.00102326 Jy ! Component: 2750 - total flux cleaned = -0.00102323 Jy ! Component: 2800 - total flux cleaned = -0.00104165 Jy ! Component: 2850 - total flux cleaned = -0.00111489 Jy ! Component: 2900 - total flux cleaned = -0.00116963 Jy ! Component: 2950 - total flux cleaned = -0.00115145 Jy ! Component: 3000 - total flux cleaned = -0.00124199 Jy ! Component: 3050 - total flux cleaned = -0.00127806 Jy ! Component: 3100 - total flux cleaned = -0.00134999 Jy ! Component: 3150 - total flux cleaned = -0.00136787 Jy ! Component: 3200 - total flux cleaned = -0.00142146 Jy ! Component: 3250 - total flux cleaned = -0.00142144 Jy ! Component: 3300 - total flux cleaned = -0.00147485 Jy ! Component: 3350 - total flux cleaned = -0.00161659 Jy ! Component: 3400 - total flux cleaned = -0.0016519 Jy ! Component: 3450 - total flux cleaned = -0.00170485 Jy ! Component: 3500 - total flux cleaned = -0.00173997 Jy ! Component: 3550 - total flux cleaned = -0.001775 Jy ! Component: 3600 - total flux cleaned = -0.00182741 Jy ! Component: 3650 - total flux cleaned = -0.00186231 Jy ! Component: 3700 - total flux cleaned = -0.00191455 Jy ! Component: 3750 - total flux cleaned = -0.00201837 Jy ! Component: 3800 - total flux cleaned = -0.00203564 Jy ! Component: 3850 - total flux cleaned = -0.0021046 Jy ! Component: 3900 - total flux cleaned = -0.00219045 Jy ! Component: 3950 - total flux cleaned = -0.00217333 Jy ! Component: 4000 - total flux cleaned = -0.00224167 Jy ! Component: 4050 - total flux cleaned = -0.00224166 Jy ! Total flux subtracted in 4096 components = -0.00227564 Jy ! Clean residual min=-0.000990 max=0.000993 Jy/beam ! Clean residual mean=0.000001 rms=0.000318 Jy/beam ! Combined flux in latest and established models = 0.0856725 Jy keep ! Adding 278 model components to the UV plane model. ! The established model now contains 451 components and 0.0856725 Jy ![Exited script file: muppet] wmap "J1609-0547_S_2017_05_01_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.688 x 8.856 at -5.716 degrees (North through East) ! Clean map min=-0.0021193 max=0.077048 Jy/beam ! Writing clean map to FITS file: J1609-0547_S_2017_05_01_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.0770483 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000317327 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -1.23556 1.23556 2.47112 4.94225 9.88449 19.769 39.538 79.076 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0009 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.077 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.688 x 8.856 at -5.716 degrees (North through East) ! Clean map min=-0.0021193 max=0.077048 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J1609-0547_S_2017_05_01_pus_uvs.log closed on Wed May 1 18:40:04 2019