! Started logfile: J1608-1625_S_2017_08_05_pus_uvs.log on Thu May 9 19:33:26 2019 obs J1608-1625_S_2017_08_05_pus_uva.fits ! Reading UV FITS file: J1608-1625_S_2017_08_05_pus_uva.fits ! AN table 1: 96 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.759954 visibilities/baseline/integration-bin. ! Found source: J1608-1625 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 513 lines of history. ! ! Reading 13132 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J1608-1625_S_2017_08_05_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 119 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 154 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 154 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 690 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.920195Jy sigma=0.006976 ! Fit after self-cal, rms=0.903163Jy sigma=0.006852 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.353 mas, bmaj=6.311 mas, bpa=-4.294 degrees ! Estimated noise=1474.56 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0755363 Jy ! Component: 100 - total flux cleaned = 0.0925231 Jy ! Total flux subtracted in 100 components = 0.0925231 Jy ! Clean residual min=-0.005136 max=0.007698 Jy/beam ! Clean residual mean=-0.000011 rms=0.001533 Jy/beam ! Combined flux in latest and established models = 0.092523 Jy ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 12 components and 0.092523 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.094486Jy sigma=0.000665 ! Fit after self-cal, rms=0.094469Jy sigma=0.000664 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.823 mas, bmaj=7.394 mas, bpa=-3.678 degrees ! Estimated noise=968.748 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00985927 Jy ! Component: 100 - total flux cleaned = 0.0148 Jy ! Component: 150 - total flux cleaned = 0.0175704 Jy ! Component: 200 - total flux cleaned = 0.0192099 Jy ! Total flux subtracted in 200 components = 0.0192099 Jy ! Clean residual min=-0.003230 max=0.004044 Jy/beam ! Clean residual mean=-0.000010 rms=0.000936 Jy/beam ! Combined flux in latest and established models = 0.111733 Jy ! Performing phase self-cal ! Adding 41 model components to the UV plane model. ! The established model now contains 50 components and 0.111733 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.093392Jy sigma=0.000657 ! Fit after self-cal, rms=0.093377Jy sigma=0.000657 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.13 FD 1.00* HN 1.00 KP 1.06 ! LA 0.96 MK 1.02 NL 0.92 OV 1.01 ! PT 1.03 SC 0.93 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.03 FD 1.00* HN 1.06 KP 0.99 ! LA 0.94 MK 1.02 NL 1.07 OV 1.06 ! PT 0.97 SC 1.06 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 0.84 FD 1.00* HN 1.04 KP 0.86 ! LA 0.80 MK 1.00 NL 1.19 OV 1.00 ! PT 0.97 SC 1.04 ! ! ! Correcting IF 4. ! A total of 270 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.00* FD 0.00* HN 0.00* KP 0.00* ! LA 0.00* MK 0.00* NL 0.00* OV 0.00* ! PT 0.00* SC 0.00* ! ! ! Fit before self-cal, rms=0.093377Jy sigma=0.000657 ! Fit after self-cal, rms=0.091533Jy sigma=0.000654 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.894 mas, bmaj=7.456 mas, bpa=-2.513 degrees ! Estimated noise=982.039 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000171359 Jy ! Component: 100 - total flux cleaned = 0.00015491 Jy ! Component: 150 - total flux cleaned = 0.000167365 Jy ! Component: 200 - total flux cleaned = 0.000166739 Jy ! Total flux subtracted in 200 components = 0.000166739 Jy ! Clean residual min=-0.002727 max=0.003184 Jy/beam ! Clean residual mean=-0.000002 rms=0.000728 Jy/beam ! Combined flux in latest and established models = 0.1119 Jy ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 55 components and 0.1119 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.091528Jy sigma=0.000654 ! Fit after self-cal, rms=0.091521Jy sigma=0.000654 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.091521Jy sigma=0.000654 ! Fit after self-cal, rms=0.093389Jy sigma=0.000652 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.894 mas, bmaj=7.472 mas, bpa=-2.541 degrees ! Estimated noise=982.91 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 7.79887e-05 Jy ! Component: 100 - total flux cleaned = 4.72227e-05 Jy ! Component: 150 - total flux cleaned = 4.67075e-05 Jy ! Component: 200 - total flux cleaned = 4.66649e-05 Jy ! Total flux subtracted in 200 components = 4.66649e-05 Jy ! Clean residual min=-0.002668 max=0.003071 Jy/beam ! Clean residual mean=-0.000002 rms=0.000654 Jy/beam ! Combined flux in latest and established models = 0.111946 Jy selfcal ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 59 components and 0.111946 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.093384Jy sigma=0.000652 ! Fit after self-cal, rms=0.093444Jy sigma=0.000652 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (41, 0). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00201681 Jy ! Component: 100 - total flux cleaned = 0.00208907 Jy ! Component: 150 - total flux cleaned = 0.00195781 Jy ! Component: 200 - total flux cleaned = 0.00199025 Jy ! Total flux subtracted in 200 components = 0.00199025 Jy ! Clean residual min=-0.002257 max=0.002353 Jy/beam ! Clean residual mean=-0.000002 rms=0.000599 Jy/beam ! Combined flux in latest and established models = 0.113937 Jy ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 72 components and 0.113937 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.093355Jy sigma=0.000651 ! Fit after self-cal, rms=0.093338Jy sigma=0.000651 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.093338Jy sigma=0.000651 ! Fit after self-cal, rms=0.093890Jy sigma=0.000651 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.894 mas, bmaj=7.487 mas, bpa=-2.57 degrees ! Estimated noise=981.976 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000440471 Jy ! Component: 100 - total flux cleaned = 0.000371879 Jy ! Component: 150 - total flux cleaned = 0.000314899 Jy ! Component: 200 - total flux cleaned = 0.000289009 Jy ! Total flux subtracted in 200 components = 0.000289009 Jy ! Clean residual min=-0.002132 max=0.002318 Jy/beam ! Clean residual mean=-0.000000 rms=0.000572 Jy/beam ! Combined flux in latest and established models = 0.114226 Jy selfcal ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 80 components and 0.114226 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.093861Jy sigma=0.000651 ! Fit after self-cal, rms=0.093870Jy sigma=0.000651 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 6.44389e-05 Jy ! Component: 100 - total flux cleaned = 1.65753e-05 Jy ! Component: 150 - total flux cleaned = -5.82742e-06 Jy ! Component: 200 - total flux cleaned = -2.71295e-05 Jy ! Total flux subtracted in 200 components = -2.71295e-05 Jy ! Clean residual min=-0.002152 max=0.002296 Jy/beam ! Clean residual mean=-0.000000 rms=0.000568 Jy/beam ! Combined flux in latest and established models = 0.114198 Jy ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 85 components and 0.114198 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.093856Jy sigma=0.000651 ! Fit after self-cal, rms=0.093853Jy sigma=0.000651 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.093853Jy sigma=0.000651 ! Fit after self-cal, rms=0.094090Jy sigma=0.000651 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.131 mas, bmaj=15.76 mas, bpa=-1.127 degrees ! Estimated noise=1302.04 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000718473 Jy ! Component: 100 - total flux cleaned = 0.000996109 Jy ! Component: 150 - total flux cleaned = 0.0010601 Jy ! Component: 200 - total flux cleaned = 0.00110559 Jy ! Total flux subtracted in 200 components = 0.00110559 Jy ! Clean residual min=-0.002232 max=0.002353 Jy/beam ! Clean residual mean=-0.000001 rms=0.000733 Jy/beam ! Combined flux in latest and established models = 0.115304 Jy selfcal ! Performing phase self-cal ! Adding 8 model components to the UV plane model. ! The established model now contains 92 components and 0.115304 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.094091Jy sigma=0.000651 ! Fit after self-cal, rms=0.094097Jy sigma=0.000651 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000216496 Jy ! Component: 100 - total flux cleaned = 0.000275866 Jy ! Component: 150 - total flux cleaned = 0.000329548 Jy ! Component: 200 - total flux cleaned = 0.000367769 Jy ! Total flux subtracted in 200 components = 0.000367769 Jy ! Clean residual min=-0.002275 max=0.002347 Jy/beam ! Clean residual mean=-0.000000 rms=0.000732 Jy/beam ! Combined flux in latest and established models = 0.115672 Jy ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 95 components and 0.115672 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.094099Jy sigma=0.000651 ! Fit after self-cal, rms=0.094097Jy sigma=0.000651 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=2.895 mas, bmaj=7.494 mas, bpa=-2.572 degrees ! Estimated noise=982.881 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.895 x 7.494 at -2.572 degrees (North through East) ! Clean map min=-0.0020862 max=0.099038 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.4 mas, bmaj=6.288 mas, bpa=-3.272 degrees ! Estimated noise=1438.88 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0759603 Jy ! Component: 100 - total flux cleaned = 0.0931191 Jy ! Component: 150 - total flux cleaned = 0.0997834 Jy ! Component: 200 - total flux cleaned = 0.104379 Jy ! Total flux subtracted in 200 components = 0.104379 Jy ! Clean residual min=-0.003822 max=0.004171 Jy/beam ! Clean residual mean=-0.000003 rms=0.001053 Jy/beam ! Combined flux in latest and established models = 0.104379 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 28 model components to the UV plane model. ! The established model now contains 28 components and 0.104379 Jy ! Inverting map and beam ! Estimated beam: bmin=2.895 mas, bmaj=7.494 mas, bpa=-2.572 degrees ! Estimated noise=982.881 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00482861 Jy ! Component: 100 - total flux cleaned = 0.00692372 Jy ! Component: 150 - total flux cleaned = 0.00783933 Jy ! Component: 200 - total flux cleaned = 0.00824454 Jy ! Total flux subtracted in 200 components = 0.00824454 Jy ! Clean residual min=-0.002336 max=0.002325 Jy/beam ! Clean residual mean=-0.000002 rms=0.000613 Jy/beam ! Combined flux in latest and established models = 0.112623 Jy ! Adding 29 model components to the UV plane model. ! The established model now contains 52 components and 0.112623 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.131 mas, bmaj=15.76 mas, bpa=-1.127 degrees ! Estimated noise=1302.04 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00181946 Jy ! Component: 100 - total flux cleaned = 0.00260886 Jy ! Component: 150 - total flux cleaned = 0.00288735 Jy ! Component: 200 - total flux cleaned = 0.00292083 Jy ! Total flux subtracted in 200 components = 0.00292083 Jy ! Clean residual min=-0.002274 max=0.002378 Jy/beam ! Clean residual mean=-0.000001 rms=0.000737 Jy/beam ! Combined flux in latest and established models = 0.115544 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 4.67576e-05 Jy ! Component: 100 - total flux cleaned = 0.000107092 Jy ! Component: 150 - total flux cleaned = 0.000150058 Jy ! Component: 200 - total flux cleaned = 0.000204252 Jy ! Total flux subtracted in 200 components = 0.000204252 Jy ! Clean residual min=-0.002291 max=0.002364 Jy/beam ! Clean residual mean=-0.000000 rms=0.000731 Jy/beam ! Combined flux in latest and established models = 0.115748 Jy ! Adding 21 model components to the UV plane model. ! The established model now contains 69 components and 0.115748 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=2.895 mas, bmaj=7.494 mas, bpa=-2.572 degrees ! Estimated noise=982.881 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000491913 Jy ! Component: 100 - total flux cleaned = -0.000570597 Jy ! Component: 150 - total flux cleaned = -0.000640381 Jy ! Component: 200 - total flux cleaned = -0.000701668 Jy ! Total flux subtracted in 200 components = -0.000701668 Jy ! Clean residual min=-0.002203 max=0.002286 Jy/beam ! Clean residual mean=0.000000 rms=0.000570 Jy/beam ! Combined flux in latest and established models = 0.115047 Jy selfcal ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 79 components and 0.115047 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.094112Jy sigma=0.000651 ! Fit after self-cal, rms=0.094109Jy sigma=0.000651 wmodel J1608-1625_S_2017_08_05_pus_map.mod ! Writing 79 model components to file: J1608-1625_S_2017_08_05_pus_map.mod wobs J1608-1625_S_2017_08_05_pus_uvs.fits ! Writing UV FITS file: J1608-1625_S_2017_08_05_pus_uvs.fits wwins J1608-1625_S_2017_08_05_pus_map.win ! wwins: Wrote 2 windows to J1608-1625_S_2017_08_05_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.000684211 Jy ! Component: 100 - total flux cleaned = 0.00102856 Jy ! Component: 150 - total flux cleaned = 0.00131707 Jy ! Component: 200 - total flux cleaned = 0.00148974 Jy ! Component: 250 - total flux cleaned = 0.00168938 Jy ! Component: 300 - total flux cleaned = 0.00175418 Jy ! Component: 350 - total flux cleaned = 0.00190896 Jy ! Component: 400 - total flux cleaned = 0.00196871 Jy ! Component: 450 - total flux cleaned = 0.00211586 Jy ! Component: 500 - total flux cleaned = 0.00225867 Jy ! Component: 550 - total flux cleaned = 0.00237026 Jy ! Component: 600 - total flux cleaned = 0.0024792 Jy ! Component: 650 - total flux cleaned = 0.00261299 Jy ! Component: 700 - total flux cleaned = 0.00276955 Jy ! Component: 750 - total flux cleaned = 0.00284565 Jy ! Component: 800 - total flux cleaned = 0.00299568 Jy ! Component: 850 - total flux cleaned = 0.00311849 Jy ! Component: 900 - total flux cleaned = 0.00326281 Jy ! Component: 950 - total flux cleaned = 0.00335724 Jy ! Component: 1000 - total flux cleaned = 0.00349666 Jy ! Component: 1050 - total flux cleaned = 0.00356522 Jy ! Component: 1100 - total flux cleaned = 0.0036327 Jy ! Component: 1150 - total flux cleaned = 0.00369902 Jy ! Component: 1200 - total flux cleaned = 0.00374226 Jy ! Component: 1250 - total flux cleaned = 0.00374251 Jy ! Component: 1300 - total flux cleaned = 0.00384812 Jy ! Component: 1350 - total flux cleaned = 0.00391044 Jy ! Component: 1400 - total flux cleaned = 0.00401283 Jy ! Component: 1450 - total flux cleaned = 0.00407301 Jy ! Component: 1500 - total flux cleaned = 0.00419155 Jy ! Component: 1550 - total flux cleaned = 0.00428913 Jy ! Component: 1600 - total flux cleaned = 0.00434679 Jy ! Component: 1650 - total flux cleaned = 0.00442272 Jy ! Component: 1700 - total flux cleaned = 0.00447883 Jy ! Component: 1750 - total flux cleaned = 0.00449743 Jy ! Component: 1800 - total flux cleaned = 0.00457044 Jy ! Component: 1850 - total flux cleaned = 0.00460663 Jy ! Component: 1900 - total flux cleaned = 0.00462481 Jy ! Component: 1950 - total flux cleaned = 0.0047127 Jy ! Component: 2000 - total flux cleaned = 0.00474721 Jy ! Component: 2050 - total flux cleaned = 0.00486735 Jy ! Component: 2100 - total flux cleaned = 0.0049014 Jy ! Component: 2150 - total flux cleaned = 0.00498523 Jy ! Component: 2200 - total flux cleaned = 0.00508502 Jy ! Component: 2250 - total flux cleaned = 0.00519999 Jy ! Component: 2300 - total flux cleaned = 0.00523242 Jy ! Component: 2350 - total flux cleaned = 0.00528078 Jy ! Component: 2400 - total flux cleaned = 0.00532877 Jy ! Component: 2450 - total flux cleaned = 0.00543876 Jy ! Component: 2500 - total flux cleaned = 0.00548555 Jy ! Component: 2550 - total flux cleaned = 0.00551637 Jy ! Component: 2600 - total flux cleaned = 0.00559307 Jy ! Component: 2650 - total flux cleaned = 0.00566876 Jy ! Component: 2700 - total flux cleaned = 0.00574398 Jy ! Component: 2750 - total flux cleaned = 0.00581828 Jy ! Component: 2800 - total flux cleaned = 0.0058772 Jy ! Component: 2850 - total flux cleaned = 0.0058774 Jy ! Component: 2900 - total flux cleaned = 0.00596457 Jy ! Component: 2950 - total flux cleaned = 0.0060508 Jy ! Component: 3000 - total flux cleaned = 0.0060793 Jy ! Component: 3050 - total flux cleaned = 0.0061076 Jy ! Component: 3100 - total flux cleaned = 0.00614977 Jy ! Component: 3150 - total flux cleaned = 0.00619151 Jy ! Component: 3200 - total flux cleaned = 0.00626051 Jy ! Component: 3250 - total flux cleaned = 0.00627414 Jy ! Component: 3300 - total flux cleaned = 0.00631494 Jy ! Component: 3350 - total flux cleaned = 0.00638237 Jy ! Component: 3400 - total flux cleaned = 0.00634189 Jy ! Component: 3450 - total flux cleaned = 0.00634199 Jy ! Component: 3500 - total flux cleaned = 0.00638165 Jy ! Component: 3550 - total flux cleaned = 0.00639498 Jy ! Component: 3600 - total flux cleaned = 0.00643407 Jy ! Component: 3650 - total flux cleaned = 0.00645994 Jy ! Component: 3700 - total flux cleaned = 0.00645997 Jy ! Component: 3750 - total flux cleaned = 0.00649838 Jy ! Component: 3800 - total flux cleaned = 0.00646043 Jy ! Component: 3850 - total flux cleaned = 0.0065111 Jy ! Component: 3900 - total flux cleaned = 0.00648608 Jy ! Component: 3950 - total flux cleaned = 0.00656093 Jy ! Component: 4000 - total flux cleaned = 0.00658554 Jy ! Component: 4050 - total flux cleaned = 0.00657315 Jy ! Total flux subtracted in 4096 components = 0.00656088 Jy ! Clean residual min=-0.000789 max=0.000756 Jy/beam ! Clean residual mean=-0.000000 rms=0.000214 Jy/beam ! Combined flux in latest and established models = 0.121608 Jy keep ! Adding 277 model components to the UV plane model. ! The established model now contains 356 components and 0.121608 Jy ![Exited script file: muppet] wmap "J1608-1625_S_2017_08_05_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.895 x 7.494 at -2.572 degrees (North through East) ! Clean map min=-0.0014686 max=0.099265 Jy/beam ! Writing clean map to FITS file: J1608-1625_S_2017_08_05_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.0992648 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000209128 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.632032 0.632032 1.26406 2.52813 5.05626 10.1125 20.225 40.4501 80.9001 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0006 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.099 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.895 x 7.494 at -2.572 degrees (North through East) ! Clean map min=-0.0014686 max=0.099265 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J1608-1625_S_2017_08_05_pus_uvs.log closed on Thu May 9 19:33:31 2019