! Started logfile: J1608+1029_S_2017_02_19_pus_uvs.log on Sat May 4 18:54:20 2019 obs J1608+1029_S_2017_02_19_pus_uva.fits ! Reading UV FITS file: J1608+1029_S_2017_02_19_pus_uva.fits ! AN table 1: 8 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.705556 visibilities/baseline/integration-bin. ! Found source: J1608+1029 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 482 lines of history. ! ! Reading 1016 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J1608+1029_S_2017_02_19_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 13 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 13 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 13 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 39 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.429873Jy sigma=0.003173 ! Fit after self-cal, rms=0.420267Jy sigma=0.003104 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.778 mas, bmaj=7.413 mas, bpa=-18.67 degrees ! Estimated noise=3708.58 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.469706 Jy ! Component: 100 - total flux cleaned = 0.598973 Jy ! Total flux subtracted in 100 components = 0.598973 Jy ! Clean residual min=-0.035726 max=0.056527 Jy/beam ! Clean residual mean=-0.000092 rms=0.011920 Jy/beam ! Combined flux in latest and established models = 0.598973 Jy ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 11 components and 0.598973 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.191680Jy sigma=0.001159 ! Fit after self-cal, rms=0.191605Jy sigma=0.001158 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.268 mas, bmaj=7.41 mas, bpa=-15.9 degrees ! Estimated noise=3377.02 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0698094 Jy ! Component: 100 - total flux cleaned = 0.108605 Jy ! Component: 150 - total flux cleaned = 0.132683 Jy ! Component: 200 - total flux cleaned = 0.148421 Jy ! Total flux subtracted in 200 components = 0.148421 Jy ! Clean residual min=-0.036101 max=0.029038 Jy/beam ! Clean residual mean=-0.000131 rms=0.008068 Jy/beam ! Combined flux in latest and established models = 0.747394 Jy ! Performing phase self-cal ! Adding 35 model components to the UV plane model. ! The established model now contains 42 components and 0.747394 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.155999Jy sigma=0.000970 ! Fit after self-cal, rms=0.155863Jy sigma=0.000969 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.09 FD 0.82 HN 1.00 KP 1.07 ! LA 1.04 MK 0.94 NL 0.92 OV 1.07 ! PT 1.00* SC 0.96 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.16 FD 0.91 HN 1.03 KP 1.03 ! LA 1.02 MK 0.97 NL 1.04 OV 1.13 ! PT 1.00* SC 1.07 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 0.97 FD 0.92 HN 0.97 KP 0.91 ! LA 0.79 MK 1.04 NL 1.17 OV 1.02 ! PT 1.00* SC 1.03 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 1.22 FD 0.65 HN 0.92 KP 1.00* ! LA 0.80 MK 1.29 NL 1.00* OV 1.05 ! PT 1.00* SC 1.00* ! ! ! Fit before self-cal, rms=0.155863Jy sigma=0.000969 ! Fit after self-cal, rms=0.097178Jy sigma=0.000670 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.288 mas, bmaj=7.543 mas, bpa=-15.77 degrees ! Estimated noise=3364.62 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0030148 Jy ! Component: 100 - total flux cleaned = 0.00302798 Jy ! Component: 150 - total flux cleaned = 0.00304726 Jy ! Component: 200 - total flux cleaned = 0.00287964 Jy ! Total flux subtracted in 200 components = 0.00287964 Jy ! Clean residual min=-0.011353 max=0.010170 Jy/beam ! Clean residual mean=-0.000017 rms=0.002424 Jy/beam ! Combined flux in latest and established models = 0.750274 Jy ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 53 components and 0.750274 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.096299Jy sigma=0.000663 ! Fit after self-cal, rms=0.096266Jy sigma=0.000663 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.096266Jy sigma=0.000663 ! Fit after self-cal, rms=0.096300Jy sigma=0.000663 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.29 mas, bmaj=7.542 mas, bpa=-15.74 degrees ! Estimated noise=3366.8 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000826405 Jy ! Component: 100 - total flux cleaned = 0.000536564 Jy ! Component: 150 - total flux cleaned = 0.000279145 Jy ! Component: 200 - total flux cleaned = 0.000159915 Jy ! Total flux subtracted in 200 components = 0.000159915 Jy ! Clean residual min=-0.010602 max=0.009949 Jy/beam ! Clean residual mean=-0.000014 rms=0.002294 Jy/beam ! Combined flux in latest and established models = 0.750434 Jy selfcal ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 57 components and 0.750434 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.095927Jy sigma=0.000660 ! Fit after self-cal, rms=0.095913Jy sigma=0.000660 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000387829 Jy ! Component: 100 - total flux cleaned = -2.33156e-05 Jy ! Component: 150 - total flux cleaned = -0.00020828 Jy ! Component: 200 - total flux cleaned = -0.000209494 Jy ! Total flux subtracted in 200 components = -0.000209494 Jy ! Clean residual min=-0.010273 max=0.009734 Jy/beam ! Clean residual mean=-0.000014 rms=0.002235 Jy/beam ! Combined flux in latest and established models = 0.750224 Jy ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 62 components and 0.750224 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.095728Jy sigma=0.000659 ! Fit after self-cal, rms=0.095723Jy sigma=0.000659 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.095723Jy sigma=0.000659 ! Fit after self-cal, rms=0.095557Jy sigma=0.000658 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.294 mas, bmaj=7.538 mas, bpa=-15.67 degrees ! Estimated noise=3363.93 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000743277 Jy ! Component: 100 - total flux cleaned = -0.00125561 Jy ! Component: 150 - total flux cleaned = -0.00133401 Jy ! Component: 200 - total flux cleaned = -0.00133766 Jy ! Total flux subtracted in 200 components = -0.00133766 Jy ! Clean residual min=-0.010054 max=0.009522 Jy/beam ! Clean residual mean=-0.000012 rms=0.002175 Jy/beam ! Combined flux in latest and established models = 0.748887 Jy selfcal ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 63 components and 0.748887 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.095413Jy sigma=0.000657 ! Fit after self-cal, rms=0.095409Jy sigma=0.000657 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -6.44321e-05 Jy ! Component: 100 - total flux cleaned = -0.000196193 Jy ! Component: 150 - total flux cleaned = -0.000130849 Jy ! Component: 200 - total flux cleaned = -0.000194739 Jy ! Total flux subtracted in 200 components = -0.000194739 Jy ! Clean residual min=-0.010007 max=0.009467 Jy/beam ! Clean residual mean=-0.000012 rms=0.002147 Jy/beam ! Combined flux in latest and established models = 0.748692 Jy ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 64 components and 0.748692 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.095321Jy sigma=0.000657 ! Fit after self-cal, rms=0.095318Jy sigma=0.000657 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.095318Jy sigma=0.000657 ! Fit after self-cal, rms=0.095188Jy sigma=0.000657 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.281 mas, bmaj=9.973 mas, bpa=3.415 degrees ! Estimated noise=4238.41 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00233784 Jy ! Component: 100 - total flux cleaned = 0.00189579 Jy ! Component: 150 - total flux cleaned = 0.0015272 Jy ! Component: 200 - total flux cleaned = 0.00118127 Jy ! Total flux subtracted in 200 components = 0.00118127 Jy ! Clean residual min=-0.010713 max=0.007678 Jy/beam ! Clean residual mean=-0.000024 rms=0.002477 Jy/beam ! Combined flux in latest and established models = 0.749873 Jy selfcal ! Performing phase self-cal ! Adding 8 model components to the UV plane model. ! The established model now contains 70 components and 0.749873 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.095233Jy sigma=0.000657 ! Fit after self-cal, rms=0.095182Jy sigma=0.000657 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000306518 Jy ! Component: 100 - total flux cleaned = -0.000586008 Jy ! Component: 150 - total flux cleaned = -0.000538089 Jy ! Component: 200 - total flux cleaned = -0.000495523 Jy ! Total flux subtracted in 200 components = -0.000495523 Jy ! Clean residual min=-0.010908 max=0.007589 Jy/beam ! Clean residual mean=-0.000024 rms=0.002439 Jy/beam ! Combined flux in latest and established models = 0.749378 Jy ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 75 components and 0.749378 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.095232Jy sigma=0.000658 ! Fit after self-cal, rms=0.095209Jy sigma=0.000657 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.297 mas, bmaj=7.536 mas, bpa=-15.63 degrees ! Estimated noise=3361 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.297 x 7.536 at -15.63 degrees (North through East) ! Clean map min=-0.01027 max=0.60584 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if ! Performing amp+phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.095209Jy sigma=0.000657 ! Fit after self-cal, rms=0.089740Jy sigma=0.000611 ! Inverting map and beam ! Estimated beam: bmin=3.305 mas, bmaj=7.514 mas, bpa=-15.45 degrees ! Estimated noise=3363.17 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 1.3271e-05 Jy ! Component: 100 - total flux cleaned = -0.000225512 Jy ! Component: 150 - total flux cleaned = -0.000363089 Jy ! Component: 200 - total flux cleaned = -0.000486435 Jy ! Total flux subtracted in 200 components = -0.000486435 Jy ! Clean residual min=-0.009934 max=0.009575 Jy/beam ! Clean residual mean=-0.000010 rms=0.002064 Jy/beam ! Combined flux in latest and established models = 0.748891 Jy ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 83 components and 0.748891 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.089617Jy sigma=0.000610 ! Fit after self-cal, rms=0.089613Jy sigma=0.000610 ! Inverting map ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -6.84298e-07 Jy ! Component: 100 - total flux cleaned = -0.000102188 Jy ! Component: 150 - total flux cleaned = -0.000194248 Jy ! Component: 200 - total flux cleaned = -0.000321669 Jy ! Total flux subtracted in 200 components = -0.000321669 Jy ! Clean residual min=-0.009875 max=0.009495 Jy/beam ! Clean residual mean=-0.000010 rms=0.002047 Jy/beam ! Combined flux in latest and established models = 0.74857 Jy ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 85 components and 0.74857 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.089561Jy sigma=0.000610 ! Fit after self-cal, rms=0.089558Jy sigma=0.000610 ! Inverting map ! Performing amp+phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.089558Jy sigma=0.000610 ! Fit after self-cal, rms=0.089507Jy sigma=0.000610 print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.81 mas, bmaj=7.505 mas, bpa=-18.17 degrees ! Estimated noise=3698.86 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.468212 Jy ! Component: 100 - total flux cleaned = 0.596951 Jy ! Component: 150 - total flux cleaned = 0.656008 Jy ! Component: 200 - total flux cleaned = 0.686158 Jy ! Total flux subtracted in 200 components = 0.686158 Jy ! Clean residual min=-0.014293 max=0.016706 Jy/beam ! Clean residual mean=-0.000014 rms=0.003716 Jy/beam ! Combined flux in latest and established models = 0.686157 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 23 model components to the UV plane model. ! The established model now contains 23 components and 0.686157 Jy ! Inverting map and beam ! Estimated beam: bmin=3.306 mas, bmaj=7.515 mas, bpa=-15.44 degrees ! Estimated noise=3360.97 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (3, 70). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0224742 Jy ! Component: 100 - total flux cleaned = 0.0369053 Jy ! Component: 150 - total flux cleaned = 0.046538 Jy ! Component: 200 - total flux cleaned = 0.0532765 Jy ! Total flux subtracted in 200 components = 0.0532765 Jy ! Clean residual min=-0.009442 max=0.008858 Jy/beam ! Clean residual mean=-0.000014 rms=0.002120 Jy/beam ! Combined flux in latest and established models = 0.739434 Jy ! Adding 32 model components to the UV plane model. ! The established model now contains 52 components and 0.739434 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.277 mas, bmaj=9.975 mas, bpa=3.854 degrees ! Estimated noise=4231.56 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00752259 Jy ! Component: 100 - total flux cleaned = 0.0107742 Jy ! Component: 150 - total flux cleaned = 0.0122531 Jy ! Component: 200 - total flux cleaned = 0.0134435 Jy ! Total flux subtracted in 200 components = 0.0134435 Jy ! Clean residual min=-0.009803 max=0.007511 Jy/beam ! Clean residual mean=-0.000027 rms=0.002187 Jy/beam ! Combined flux in latest and established models = 0.752877 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00105006 Jy ! Component: 100 - total flux cleaned = 0.00185326 Jy ! Component: 150 - total flux cleaned = 0.00242379 Jy ! Component: 200 - total flux cleaned = 0.00267762 Jy ! Total flux subtracted in 200 components = 0.00267762 Jy ! Clean residual min=-0.009316 max=0.007405 Jy/beam ! Clean residual mean=-0.000026 rms=0.002132 Jy/beam ! Combined flux in latest and established models = 0.755555 Jy ! Adding 42 model components to the UV plane model. ! The established model now contains 88 components and 0.755554 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.306 mas, bmaj=7.515 mas, bpa=-15.44 degrees ! Estimated noise=3360.97 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000931047 Jy ! Component: 100 - total flux cleaned = -9.93536e-05 Jy ! Component: 150 - total flux cleaned = 0.000414334 Jy ! Component: 200 - total flux cleaned = 0.000499546 Jy ! Total flux subtracted in 200 components = 0.000499546 Jy ! Clean residual min=-0.008124 max=0.009265 Jy/beam ! Clean residual mean=-0.000010 rms=0.001886 Jy/beam ! Combined flux in latest and established models = 0.756054 Jy selfcal ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 106 components and 0.756054 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.089130Jy sigma=0.000607 ! Fit after self-cal, rms=0.089091Jy sigma=0.000607 wmodel J1608+1029_S_2017_02_19_pus_map.mod ! Writing 106 model components to file: J1608+1029_S_2017_02_19_pus_map.mod wobs J1608+1029_S_2017_02_19_pus_uvs.fits ! Writing UV FITS file: J1608+1029_S_2017_02_19_pus_uvs.fits wwins J1608+1029_S_2017_02_19_pus_map.win ! wwins: Wrote 2 windows to J1608+1029_S_2017_02_19_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.000611292 Jy ! Component: 100 - total flux cleaned = -0.000846849 Jy ! Component: 150 - total flux cleaned = -0.00168886 Jy ! Component: 200 - total flux cleaned = -0.00202566 Jy ! Component: 250 - total flux cleaned = -0.0023371 Jy ! Component: 300 - total flux cleaned = -0.00311343 Jy ! Component: 350 - total flux cleaned = -0.00357531 Jy ! Component: 400 - total flux cleaned = -0.00384156 Jy ! Component: 450 - total flux cleaned = -0.00418338 Jy ! Component: 500 - total flux cleaned = -0.00418042 Jy ! Component: 550 - total flux cleaned = -0.00410261 Jy ! Component: 600 - total flux cleaned = -0.00463394 Jy ! Component: 650 - total flux cleaned = -0.00485281 Jy ! Component: 700 - total flux cleaned = -0.00521029 Jy ! Component: 750 - total flux cleaned = -0.00541917 Jy ! Component: 800 - total flux cleaned = -0.00555461 Jy ! Component: 850 - total flux cleaned = -0.00555412 Jy ! Component: 900 - total flux cleaned = -0.00530177 Jy ! Component: 950 - total flux cleaned = -0.00530171 Jy ! Component: 1000 - total flux cleaned = -0.00499956 Jy ! Component: 1050 - total flux cleaned = -0.00470476 Jy ! Component: 1100 - total flux cleaned = -0.00441756 Jy ! Component: 1150 - total flux cleaned = -0.00430452 Jy ! Component: 1200 - total flux cleaned = -0.00413791 Jy ! Component: 1250 - total flux cleaned = -0.00381269 Jy ! Component: 1300 - total flux cleaned = -0.00365425 Jy ! Component: 1350 - total flux cleaned = -0.00355012 Jy ! Component: 1400 - total flux cleaned = -0.00329461 Jy ! Component: 1450 - total flux cleaned = -0.00304431 Jy ! Component: 1500 - total flux cleaned = -0.00289713 Jy ! Component: 1550 - total flux cleaned = -0.00275235 Jy ! Component: 1600 - total flux cleaned = -0.00289506 Jy ! Component: 1650 - total flux cleaned = -0.00275446 Jy ! Component: 1700 - total flux cleaned = -0.00284693 Jy ! Component: 1750 - total flux cleaned = -0.00275608 Jy ! Component: 1800 - total flux cleaned = -0.00280178 Jy ! Component: 1850 - total flux cleaned = -0.00284594 Jy ! Component: 1900 - total flux cleaned = -0.00288919 Jy ! Component: 1950 - total flux cleaned = -0.00288899 Jy ! Component: 2000 - total flux cleaned = -0.00301729 Jy ! Component: 2050 - total flux cleaned = -0.00314413 Jy ! Component: 2100 - total flux cleaned = -0.00318592 Jy ! Component: 2150 - total flux cleaned = -0.00322733 Jy ! Component: 2200 - total flux cleaned = -0.00339196 Jy ! Component: 2250 - total flux cleaned = -0.00355504 Jy ! Component: 2300 - total flux cleaned = -0.00359529 Jy ! Component: 2350 - total flux cleaned = -0.00359569 Jy ! Component: 2400 - total flux cleaned = -0.00371567 Jy ! Component: 2450 - total flux cleaned = -0.00383486 Jy ! Component: 2500 - total flux cleaned = -0.00383531 Jy ! Component: 2550 - total flux cleaned = -0.00399213 Jy ! Component: 2600 - total flux cleaned = -0.00410911 Jy ! Component: 2650 - total flux cleaned = -0.00414789 Jy ! Component: 2700 - total flux cleaned = -0.00437932 Jy ! Component: 2750 - total flux cleaned = -0.00441729 Jy ! Component: 2800 - total flux cleaned = -0.0045702 Jy ! Component: 2850 - total flux cleaned = -0.00468435 Jy ! Component: 2900 - total flux cleaned = -0.00483626 Jy ! Component: 2950 - total flux cleaned = -0.00498713 Jy ! Component: 3000 - total flux cleaned = -0.00510032 Jy ! Component: 3050 - total flux cleaned = -0.00525079 Jy ! Component: 3100 - total flux cleaned = -0.00536331 Jy ! Component: 3150 - total flux cleaned = -0.00551268 Jy ! Component: 3200 - total flux cleaned = -0.00562479 Jy ! Component: 3250 - total flux cleaned = -0.00573646 Jy ! Component: 3300 - total flux cleaned = -0.00584796 Jy ! Component: 3350 - total flux cleaned = -0.0059591 Jy ! Component: 3400 - total flux cleaned = -0.00610703 Jy ! Component: 3450 - total flux cleaned = -0.00621815 Jy ! Component: 3500 - total flux cleaned = -0.00632952 Jy ! Component: 3550 - total flux cleaned = -0.00644052 Jy ! Component: 3600 - total flux cleaned = -0.00651443 Jy ! Component: 3650 - total flux cleaned = -0.00669901 Jy ! Component: 3700 - total flux cleaned = -0.0067359 Jy ! Component: 3750 - total flux cleaned = -0.00680972 Jy ! Component: 3800 - total flux cleaned = -0.00688344 Jy ! Component: 3850 - total flux cleaned = -0.0069939 Jy ! Component: 3900 - total flux cleaned = -0.00714142 Jy ! Component: 3950 - total flux cleaned = -0.00725239 Jy ! Component: 4000 - total flux cleaned = -0.00736335 Jy ! Component: 4050 - total flux cleaned = -0.00747485 Jy ! Total flux subtracted in 4096 components = -0.00762313 Jy ! Clean residual min=-0.002213 max=0.002254 Jy/beam ! Clean residual mean=-0.000006 rms=0.000598 Jy/beam ! Combined flux in latest and established models = 0.748431 Jy keep ! Adding 221 model components to the UV plane model. ! The established model now contains 327 components and 0.748431 Jy ![Exited script file: muppet] wmap "J1608+1029_S_2017_02_19_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.306 x 7.515 at -15.44 degrees (North through East) ! Clean map min=-0.0049552 max=0.60474 Jy/beam ! Writing clean map to FITS file: J1608+1029_S_2017_02_19_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.60474 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.00061207 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.303636 0.303636 0.607272 1.21454 2.42909 4.85818 9.71635 19.4327 38.8654 77.7308 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0018 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.604 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.306 x 7.515 at -15.44 degrees (North through East) ! Clean map min=-0.0049552 max=0.60474 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J1608+1029_S_2017_02_19_pus_uvs.log closed on Sat May 4 18:54:24 2019