! Started logfile: J1608+1029_S_2017_01_21_pus_uvs.log on Sun May 5 15:58:34 2019 obs J1608+1029_S_2017_01_21_pus_uva.fits ! Reading UV FITS file: J1608+1029_S_2017_01_21_pus_uva.fits ! AN table 1: 8 integrations on 36 of 36 possible baselines. ! Apparent sampling: 0.652778 visibilities/baseline/integration-bin. ! Found source: J1608+1029 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 558 lines of history. ! ! Reading 752 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J1608+1029_S_2017_01_21_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 14 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 14 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 14 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 32 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.490119Jy sigma=0.003719 ! Fit after self-cal, rms=0.488114Jy sigma=0.003704 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.1 mas, bmaj=6.531 mas, bpa=11.45 degrees ! Estimated noise=4334.08 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.397275 Jy ! Component: 100 - total flux cleaned = 0.519464 Jy ! Total flux subtracted in 100 components = 0.519464 Jy ! Clean residual min=-0.028494 max=0.051899 Jy/beam ! Clean residual mean=0.000076 rms=0.009362 Jy/beam ! Combined flux in latest and established models = 0.519464 Jy ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 10 components and 0.519464 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.137482Jy sigma=0.000988 ! Fit after self-cal, rms=0.137419Jy sigma=0.000987 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.496 mas, bmaj=7.077 mas, bpa=11.62 degrees ! Estimated noise=3731.94 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0670023 Jy ! Component: 100 - total flux cleaned = 0.0961309 Jy ! Component: 150 - total flux cleaned = 0.109777 Jy ! Component: 200 - total flux cleaned = 0.115561 Jy ! Total flux subtracted in 200 components = 0.115561 Jy ! Clean residual min=-0.016210 max=0.019398 Jy/beam ! Clean residual mean=0.000042 rms=0.004690 Jy/beam ! Combined flux in latest and established models = 0.635025 Jy ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 21 components and 0.635025 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.106224Jy sigma=0.000717 ! Fit after self-cal, rms=0.106132Jy sigma=0.000716 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.02 FD 1.00* HN 0.95 LA 1.01 ! MK 0.98 NL 0.99 OV 1.09 PT 0.97 ! SC 0.95 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.05 FD 1.00* HN 1.03 LA 0.97 ! MK 0.94 NL 0.96 OV 1.10 PT 0.95 ! SC 1.02 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 1.02 FD 1.00* HN 1.02 LA 0.97 ! MK 1.02 NL 0.93 OV 0.99 PT 0.96 ! SC 0.97 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 1.04 FD 1.00* HN 0.97 LA 1.07 ! MK 1.17 NL 1.00* OV 1.06 PT 0.99 ! SC 1.00* ! ! ! Fit before self-cal, rms=0.106132Jy sigma=0.000716 ! Fit after self-cal, rms=0.102426Jy sigma=0.000660 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.484 mas, bmaj=7.089 mas, bpa=11.9 degrees ! Estimated noise=3705.07 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00107639 Jy ! Component: 100 - total flux cleaned = 0.000904181 Jy ! Component: 150 - total flux cleaned = 0.000755524 Jy ! Component: 200 - total flux cleaned = 0.000490585 Jy ! Total flux subtracted in 200 components = 0.000490585 Jy ! Clean residual min=-0.012793 max=0.014517 Jy/beam ! Clean residual mean=0.000018 rms=0.002981 Jy/beam ! Combined flux in latest and established models = 0.635516 Jy ! Performing phase self-cal ! Adding 8 model components to the UV plane model. ! The established model now contains 28 components and 0.635516 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.101642Jy sigma=0.000656 ! Fit after self-cal, rms=0.101709Jy sigma=0.000656 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.101709Jy sigma=0.000656 ! Fit after self-cal, rms=0.102116Jy sigma=0.000655 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.481 mas, bmaj=7.09 mas, bpa=11.92 degrees ! Estimated noise=3711.31 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00130392 Jy ! Component: 100 - total flux cleaned = 0.001058 Jy ! Component: 150 - total flux cleaned = 0.000955583 Jy ! Component: 200 - total flux cleaned = 0.000958213 Jy ! Total flux subtracted in 200 components = 0.000958213 Jy ! Clean residual min=-0.012915 max=0.014844 Jy/beam ! Clean residual mean=0.000018 rms=0.002938 Jy/beam ! Combined flux in latest and established models = 0.636474 Jy selfcal ! Performing phase self-cal ! Adding 7 model components to the UV plane model. ! The established model now contains 31 components and 0.636474 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.101738Jy sigma=0.000654 ! Fit after self-cal, rms=0.101716Jy sigma=0.000654 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-68.5, -125.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0119223 Jy ! Component: 100 - total flux cleaned = 0.0153544 Jy ! Component: 150 - total flux cleaned = 0.0156577 Jy ! Component: 200 - total flux cleaned = 0.0158961 Jy ! Total flux subtracted in 200 components = 0.0158961 Jy ! Clean residual min=-0.010362 max=0.009749 Jy/beam ! Clean residual mean=0.000006 rms=0.002314 Jy/beam ! Combined flux in latest and established models = 0.65237 Jy ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 48 components and 0.65237 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.100149Jy sigma=0.000643 ! Fit after self-cal, rms=0.099969Jy sigma=0.000642 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.099969Jy sigma=0.000642 ! Fit after self-cal, rms=0.099464Jy sigma=0.000641 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.48 mas, bmaj=7.088 mas, bpa=11.84 degrees ! Estimated noise=3713.34 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00333127 Jy ! Component: 100 - total flux cleaned = 0.00423201 Jy ! Component: 150 - total flux cleaned = 0.0045612 Jy ! Component: 200 - total flux cleaned = 0.00505458 Jy ! Total flux subtracted in 200 components = 0.00505458 Jy ! Clean residual min=-0.009418 max=0.009351 Jy/beam ! Clean residual mean=0.000000 rms=0.002101 Jy/beam ! Combined flux in latest and established models = 0.657425 Jy selfcal ! Performing phase self-cal ! Adding 23 model components to the UV plane model. ! The established model now contains 59 components and 0.657424 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.099107Jy sigma=0.000638 ! Fit after self-cal, rms=0.099054Jy sigma=0.000638 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00064747 Jy ! Component: 100 - total flux cleaned = 0.000820824 Jy ! Component: 150 - total flux cleaned = 0.000743624 Jy ! Component: 200 - total flux cleaned = 0.000813082 Jy ! Total flux subtracted in 200 components = 0.000813082 Jy ! Clean residual min=-0.009124 max=0.009367 Jy/beam ! Clean residual mean=-0.000003 rms=0.002067 Jy/beam ! Combined flux in latest and established models = 0.658237 Jy ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 64 components and 0.658237 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.098895Jy sigma=0.000638 ! Fit after self-cal, rms=0.098877Jy sigma=0.000638 ! Inverting map ! Added new window around map position (61.5, -15.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00660954 Jy ! Component: 100 - total flux cleaned = 0.00633345 Jy ! Component: 150 - total flux cleaned = 0.00699565 Jy ! Component: 200 - total flux cleaned = 0.00794855 Jy ! Total flux subtracted in 200 components = 0.00794855 Jy ! Clean residual min=-0.007829 max=0.006637 Jy/beam ! Clean residual mean=0.000000 rms=0.001760 Jy/beam ! Combined flux in latest and established models = 0.666186 Jy ! Performing phase self-cal ! Adding 25 model components to the UV plane model. ! The established model now contains 86 components and 0.666186 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.098206Jy sigma=0.000633 ! Fit after self-cal, rms=0.098186Jy sigma=0.000632 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.098186Jy sigma=0.000632 ! Fit after self-cal, rms=0.098150Jy sigma=0.000632 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=6.518 mas, bmaj=10.35 mas, bpa=-4.264 degrees ! Estimated noise=4805.88 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000346621 Jy ! Component: 100 - total flux cleaned = 0.00118721 Jy ! Component: 150 - total flux cleaned = 0.00171504 Jy ! Component: 200 - total flux cleaned = 0.00202413 Jy ! Total flux subtracted in 200 components = 0.00202413 Jy ! Clean residual min=-0.006909 max=0.006686 Jy/beam ! Clean residual mean=0.000002 rms=0.001897 Jy/beam ! Combined flux in latest and established models = 0.66821 Jy selfcal ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 105 components and 0.66821 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.098134Jy sigma=0.000632 ! Fit after self-cal, rms=0.098077Jy sigma=0.000632 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000239506 Jy ! Component: 100 - total flux cleaned = 5.78723e-05 Jy ! Component: 150 - total flux cleaned = 0.000196994 Jy ! Component: 200 - total flux cleaned = 0.000258759 Jy ! Total flux subtracted in 200 components = 0.000258759 Jy ! Clean residual min=-0.006560 max=0.006403 Jy/beam ! Clean residual mean=0.000002 rms=0.001856 Jy/beam ! Combined flux in latest and established models = 0.668469 Jy ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 114 components and 0.668469 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.098090Jy sigma=0.000632 ! Fit after self-cal, rms=0.098044Jy sigma=0.000632 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.479 mas, bmaj=7.089 mas, bpa=11.84 degrees ! Estimated noise=3711.04 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.479 x 7.089 at 11.84 degrees (North through East) ! Clean map min=-0.0072227 max=0.52339 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if ! Performing amp+phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.098044Jy sigma=0.000632 ! Fit after self-cal, rms=0.092839Jy sigma=0.000573 ! Inverting map and beam ! Estimated beam: bmin=3.484 mas, bmaj=7.096 mas, bpa=11.8 degrees ! Estimated noise=3719.16 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00149811 Jy ! Component: 100 - total flux cleaned = 0.00218449 Jy ! Component: 150 - total flux cleaned = 0.00291097 Jy ! Component: 200 - total flux cleaned = 0.0035827 Jy ! Total flux subtracted in 200 components = 0.0035827 Jy ! Clean residual min=-0.007581 max=0.006478 Jy/beam ! Clean residual mean=-0.000001 rms=0.001650 Jy/beam ! Combined flux in latest and established models = 0.672052 Jy ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 127 components and 0.672052 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.092635Jy sigma=0.000572 ! Fit after self-cal, rms=0.092626Jy sigma=0.000572 ! Inverting map ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000560926 Jy ! Component: 100 - total flux cleaned = 0.000940391 Jy ! Component: 150 - total flux cleaned = 0.00129983 Jy ! Component: 200 - total flux cleaned = 0.00164086 Jy ! Total flux subtracted in 200 components = 0.00164086 Jy ! Clean residual min=-0.007534 max=0.006610 Jy/beam ! Clean residual mean=-0.000001 rms=0.001627 Jy/beam ! Combined flux in latest and established models = 0.673693 Jy ! Performing phase self-cal ! Adding 26 model components to the UV plane model. ! The established model now contains 135 components and 0.673693 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.092504Jy sigma=0.000571 ! Fit after self-cal, rms=0.092502Jy sigma=0.000571 ! Inverting map ! Performing amp+phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.092502Jy sigma=0.000571 ! Fit after self-cal, rms=0.092543Jy sigma=0.000571 print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.088 mas, bmaj=6.54 mas, bpa=11.58 degrees ! Estimated noise=4352.25 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.399208 Jy ! Component: 100 - total flux cleaned = 0.524718 Jy ! Component: 150 - total flux cleaned = 0.582586 Jy ! Component: 200 - total flux cleaned = 0.612537 Jy ! Total flux subtracted in 200 components = 0.612537 Jy ! Clean residual min=-0.017614 max=0.019759 Jy/beam ! Clean residual mean=0.000026 rms=0.004261 Jy/beam ! Combined flux in latest and established models = 0.612537 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 18 model components to the UV plane model. ! The established model now contains 18 components and 0.612537 Jy ! Inverting map and beam ! Estimated beam: bmin=3.482 mas, bmaj=7.096 mas, bpa=11.75 degrees ! Estimated noise=3720.83 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-4.5, 6). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0215533 Jy ! Component: 100 - total flux cleaned = 0.0351786 Jy ! Component: 150 - total flux cleaned = 0.043785 Jy ! Component: 200 - total flux cleaned = 0.0495773 Jy ! Total flux subtracted in 200 components = 0.0495773 Jy ! Clean residual min=-0.010181 max=0.008874 Jy/beam ! Clean residual mean=0.000010 rms=0.002391 Jy/beam ! Combined flux in latest and established models = 0.662115 Jy ! Adding 23 model components to the UV plane model. ! The established model now contains 35 components and 0.662114 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=6.519 mas, bmaj=10.37 mas, bpa=-4.256 degrees ! Estimated noise=4813.24 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00425526 Jy ! Component: 100 - total flux cleaned = 0.0063739 Jy ! Component: 150 - total flux cleaned = 0.00817223 Jy ! Component: 200 - total flux cleaned = 0.00939934 Jy ! Total flux subtracted in 200 components = 0.00939934 Jy ! Clean residual min=-0.007495 max=0.006816 Jy/beam ! Clean residual mean=0.000006 rms=0.002313 Jy/beam ! Combined flux in latest and established models = 0.671514 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000622712 Jy ! Component: 100 - total flux cleaned = 0.00131539 Jy ! Component: 150 - total flux cleaned = 0.00179915 Jy ! Component: 200 - total flux cleaned = 0.00212685 Jy ! Total flux subtracted in 200 components = 0.00212685 Jy ! Clean residual min=-0.006597 max=0.006682 Jy/beam ! Clean residual mean=0.000008 rms=0.001965 Jy/beam ! Combined flux in latest and established models = 0.673641 Jy ! Adding 49 model components to the UV plane model. ! The established model now contains 77 components and 0.673641 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.482 mas, bmaj=7.096 mas, bpa=11.75 degrees ! Estimated noise=3720.83 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0015073 Jy ! Component: 100 - total flux cleaned = 0.00251456 Jy ! Component: 150 - total flux cleaned = 0.00337928 Jy ! Component: 200 - total flux cleaned = 0.0032439 Jy ! Total flux subtracted in 200 components = 0.0032439 Jy ! Clean residual min=-0.008071 max=0.007240 Jy/beam ! Clean residual mean=0.000002 rms=0.001715 Jy/beam ! Combined flux in latest and established models = 0.676885 Jy selfcal ! Performing phase self-cal ! Adding 24 model components to the UV plane model. ! The established model now contains 100 components and 0.676884 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.092879Jy sigma=0.000574 ! Fit after self-cal, rms=0.092864Jy sigma=0.000573 wmodel J1608+1029_S_2017_01_21_pus_map.mod ! Writing 100 model components to file: J1608+1029_S_2017_01_21_pus_map.mod wobs J1608+1029_S_2017_01_21_pus_uvs.fits ! Writing UV FITS file: J1608+1029_S_2017_01_21_pus_uvs.fits wwins J1608+1029_S_2017_01_21_pus_map.win ! wwins: Wrote 4 windows to J1608+1029_S_2017_01_21_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.000803787 Jy ! Component: 100 - total flux cleaned = -9.95893e-05 Jy ! Component: 150 - total flux cleaned = 0.000862324 Jy ! Component: 200 - total flux cleaned = 0.00155035 Jy ! Component: 250 - total flux cleaned = 0.00218772 Jy ! Component: 300 - total flux cleaned = 0.00279386 Jy ! Component: 350 - total flux cleaned = 0.00321088 Jy ! Component: 400 - total flux cleaned = 0.00352747 Jy ! Component: 450 - total flux cleaned = 0.00375655 Jy ! Component: 500 - total flux cleaned = 0.00397844 Jy ! Component: 550 - total flux cleaned = 0.00405173 Jy ! Component: 600 - total flux cleaned = 0.00432691 Jy ! Component: 650 - total flux cleaned = 0.0045274 Jy ! Component: 700 - total flux cleaned = 0.0047224 Jy ! Component: 750 - total flux cleaned = 0.00491423 Jy ! Component: 800 - total flux cleaned = 0.00528973 Jy ! Component: 850 - total flux cleaned = 0.00571811 Jy ! Component: 900 - total flux cleaned = 0.00601783 Jy ! Component: 950 - total flux cleaned = 0.00636972 Jy ! Component: 1000 - total flux cleaned = 0.00677186 Jy ! Component: 1050 - total flux cleaned = 0.00711024 Jy ! Component: 1100 - total flux cleaned = 0.00733144 Jy ! Component: 1150 - total flux cleaned = 0.00771302 Jy ! Component: 1200 - total flux cleaned = 0.00819516 Jy ! Component: 1250 - total flux cleaned = 0.0084584 Jy ! Component: 1300 - total flux cleaned = 0.00882158 Jy ! Component: 1350 - total flux cleaned = 0.00917913 Jy ! Component: 1400 - total flux cleaned = 0.00948115 Jy ! Component: 1450 - total flux cleaned = 0.00967893 Jy ! Component: 1500 - total flux cleaned = 0.00992262 Jy ! Component: 1550 - total flux cleaned = 0.0100674 Jy ! Component: 1600 - total flux cleaned = 0.0102583 Jy ! Component: 1650 - total flux cleaned = 0.0105399 Jy ! Component: 1700 - total flux cleaned = 0.0107246 Jy ! Component: 1750 - total flux cleaned = 0.0108162 Jy ! Component: 1800 - total flux cleaned = 0.0110416 Jy ! Component: 1850 - total flux cleaned = 0.0111752 Jy ! Component: 1900 - total flux cleaned = 0.0112194 Jy ! Component: 1950 - total flux cleaned = 0.0113057 Jy ! Component: 2000 - total flux cleaned = 0.0113063 Jy ! Component: 2050 - total flux cleaned = 0.0114768 Jy ! Component: 2100 - total flux cleaned = 0.0116875 Jy ! Component: 2150 - total flux cleaned = 0.0118541 Jy ! Component: 2200 - total flux cleaned = 0.0118121 Jy ! Component: 2250 - total flux cleaned = 0.0118532 Jy ! Component: 2300 - total flux cleaned = 0.0119352 Jy ! Component: 2350 - total flux cleaned = 0.0121383 Jy ! Component: 2400 - total flux cleaned = 0.0121786 Jy ! Component: 2450 - total flux cleaned = 0.0122585 Jy ! Component: 2500 - total flux cleaned = 0.0123378 Jy ! Component: 2550 - total flux cleaned = 0.0124168 Jy ! Component: 2600 - total flux cleaned = 0.012573 Jy ! Component: 2650 - total flux cleaned = 0.0126897 Jy ! Component: 2700 - total flux cleaned = 0.0127673 Jy ! Component: 2750 - total flux cleaned = 0.0129601 Jy ! Component: 2800 - total flux cleaned = 0.0130367 Jy ! Component: 2850 - total flux cleaned = 0.0131129 Jy ! Component: 2900 - total flux cleaned = 0.0131511 Jy ! Component: 2950 - total flux cleaned = 0.0132648 Jy ! Component: 3000 - total flux cleaned = 0.0134156 Jy ! Component: 3050 - total flux cleaned = 0.0134532 Jy ! Component: 3100 - total flux cleaned = 0.0135653 Jy ! Component: 3150 - total flux cleaned = 0.0134909 Jy ! Component: 3200 - total flux cleaned = 0.0136394 Jy ! Component: 3250 - total flux cleaned = 0.0137872 Jy ! Component: 3300 - total flux cleaned = 0.0138237 Jy ! Component: 3350 - total flux cleaned = 0.0139338 Jy ! Component: 3400 - total flux cleaned = 0.0139704 Jy ! Component: 3450 - total flux cleaned = 0.014007 Jy ! Component: 3500 - total flux cleaned = 0.0140798 Jy ! Component: 3550 - total flux cleaned = 0.014116 Jy ! Component: 3600 - total flux cleaned = 0.0141885 Jy ! Component: 3650 - total flux cleaned = 0.0142246 Jy ! Component: 3700 - total flux cleaned = 0.0143323 Jy ! Component: 3750 - total flux cleaned = 0.0142964 Jy ! Component: 3800 - total flux cleaned = 0.0142604 Jy ! Component: 3850 - total flux cleaned = 0.014332 Jy ! Component: 3900 - total flux cleaned = 0.0144753 Jy ! Component: 3950 - total flux cleaned = 0.0144395 Jy ! Component: 4000 - total flux cleaned = 0.0143684 Jy ! Component: 4050 - total flux cleaned = 0.0144397 Jy ! Total flux subtracted in 4096 components = 0.0145466 Jy ! Clean residual min=-0.002137 max=0.002492 Jy/beam ! Clean residual mean=-0.000004 rms=0.000569 Jy/beam ! Combined flux in latest and established models = 0.691431 Jy keep ! Adding 215 model components to the UV plane model. ! The established model now contains 315 components and 0.691431 Jy ![Exited script file: muppet] wmap "J1608+1029_S_2017_01_21_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.482 x 7.096 at 11.75 degrees (North through East) ! Clean map min=-0.0058493 max=0.52478 Jy/beam ! Writing clean map to FITS file: J1608+1029_S_2017_01_21_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.524775 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000558806 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.319455 0.319455 0.63891 1.27782 2.55564 5.11128 10.2226 20.4451 40.8902 81.7804 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0016 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.524 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.482 x 7.096 at 11.75 degrees (North through East) ! Clean map min=-0.0058493 max=0.52478 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J1608+1029_S_2017_01_21_pus_uvs.log closed on Sun May 5 15:58:38 2019