! Started logfile: J1607-3331_S_2017_10_21_pus_uvs.log on Sat May 11 21:01:35 2019 obs J1607-3331_S_2017_10_21_pus_uva.fits ! Reading UV FITS file: J1607-3331_S_2017_10_21_pus_uva.fits ! AN table 1: 99 integrations on 36 of 36 possible baselines. ! Apparent sampling: 0.587262 visibilities/baseline/integration-bin. ! Found source: J1607-3331 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 644 lines of history. ! ! Reading 8372 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J1607-3331_S_2017_10_21_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 216 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 216 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 204 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 510 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.901049Jy sigma=0.005991 ! Fit after self-cal, rms=0.864554Jy sigma=0.005818 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.594 mas, bmaj=13.43 mas, bpa=-18.57 degrees ! Estimated noise=1902.37 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.101134 Jy ! Component: 100 - total flux cleaned = 0.125045 Jy ! Total flux subtracted in 100 components = 0.125045 Jy ! Clean residual min=-0.006745 max=0.010163 Jy/beam ! Clean residual mean=0.000007 rms=0.001853 Jy/beam ! Combined flux in latest and established models = 0.125045 Jy ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 16 components and 0.125045 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.125912Jy sigma=0.000753 ! Fit after self-cal, rms=0.125854Jy sigma=0.000753 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.52 mas, bmaj=17.21 mas, bpa=-18.21 degrees ! Estimated noise=1311.68 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0224548 Jy ! Component: 100 - total flux cleaned = 0.0333732 Jy ! Component: 150 - total flux cleaned = 0.0392155 Jy ! Component: 200 - total flux cleaned = 0.042452 Jy ! Total flux subtracted in 200 components = 0.042452 Jy ! Clean residual min=-0.005756 max=0.005383 Jy/beam ! Clean residual mean=-0.000064 rms=0.001497 Jy/beam ! Combined flux in latest and established models = 0.167497 Jy ! Performing phase self-cal ! Adding 58 model components to the UV plane model. ! The established model now contains 71 components and 0.167497 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.121999Jy sigma=0.000726 ! Fit after self-cal, rms=0.121994Jy sigma=0.000725 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.03 HN 1.13 KP 1.09 ! LA 1.02 MK 0.97 NL 0.93 OV 0.99 ! PT 0.98 ! ! ! Correcting IF 2. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 0.98 HN 1.23 KP 1.05 ! LA 0.98 MK 1.01 NL 1.07 OV 1.01 ! PT 0.95 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.07 HN 1.17 KP 1.09 ! LA 0.74 MK 1.00 NL 1.23 OV 0.92 ! PT 0.90 ! ! ! Correcting IF 4. ! A total of 21 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.07 HN 0.84 KP 1.00* ! LA 0.90 MK 1.07 NL 1.00* OV 1.00* ! PT 0.91 ! ! ! Fit before self-cal, rms=0.121994Jy sigma=0.000725 ! Fit after self-cal, rms=0.121491Jy sigma=0.000716 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.551 mas, bmaj=17.27 mas, bpa=-18.35 degrees ! Estimated noise=1314.87 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000585387 Jy ! Component: 100 - total flux cleaned = -0.000583979 Jy ! Component: 150 - total flux cleaned = -0.000626214 Jy ! Component: 200 - total flux cleaned = -0.000627867 Jy ! Total flux subtracted in 200 components = -0.000627867 Jy ! Clean residual min=-0.004275 max=0.003889 Jy/beam ! Clean residual mean=-0.000011 rms=0.001089 Jy/beam ! Combined flux in latest and established models = 0.166869 Jy ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 85 components and 0.166869 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.121445Jy sigma=0.000716 ! Fit after self-cal, rms=0.121548Jy sigma=0.000715 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.121548Jy sigma=0.000715 ! Fit after self-cal, rms=0.124210Jy sigma=0.000712 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.554 mas, bmaj=17.35 mas, bpa=-18.43 degrees ! Estimated noise=1318.35 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 1.03602e-05 Jy ! Component: 100 - total flux cleaned = -7.13495e-05 Jy ! Component: 150 - total flux cleaned = -0.000137181 Jy ! Component: 200 - total flux cleaned = -0.000173467 Jy ! Total flux subtracted in 200 components = -0.000173467 Jy ! Clean residual min=-0.003844 max=0.003441 Jy/beam ! Clean residual mean=-0.000012 rms=0.001009 Jy/beam ! Combined flux in latest and established models = 0.166696 Jy selfcal ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 99 components and 0.166696 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.124199Jy sigma=0.000712 ! Fit after self-cal, rms=0.124292Jy sigma=0.000712 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -9.59095e-05 Jy ! Component: 100 - total flux cleaned = -8.04817e-05 Jy ! Component: 150 - total flux cleaned = -6.63769e-05 Jy ! Component: 200 - total flux cleaned = -5.23324e-05 Jy ! Total flux subtracted in 200 components = -5.23324e-05 Jy ! Clean residual min=-0.003829 max=0.003422 Jy/beam ! Clean residual mean=-0.000013 rms=0.001010 Jy/beam ! Combined flux in latest and established models = 0.166644 Jy ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 106 components and 0.166644 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.124288Jy sigma=0.000712 ! Fit after self-cal, rms=0.124289Jy sigma=0.000712 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.124289Jy sigma=0.000712 ! Fit after self-cal, rms=0.128840Jy sigma=0.000706 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.555 mas, bmaj=17.45 mas, bpa=-18.49 degrees ! Estimated noise=1321.66 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000104188 Jy ! Component: 100 - total flux cleaned = -0.000191143 Jy ! Component: 150 - total flux cleaned = -0.000247572 Jy ! Component: 200 - total flux cleaned = -0.000296641 Jy ! Total flux subtracted in 200 components = -0.000296641 Jy ! Clean residual min=-0.003645 max=0.004026 Jy/beam ! Clean residual mean=0.000001 rms=0.000933 Jy/beam ! Combined flux in latest and established models = 0.166347 Jy selfcal ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 116 components and 0.166347 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.128832Jy sigma=0.000706 ! Fit after self-cal, rms=0.129030Jy sigma=0.000706 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (93.5, -57). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00217888 Jy ! Component: 100 - total flux cleaned = 0.00208388 Jy ! Component: 150 - total flux cleaned = 0.00200204 Jy ! Component: 200 - total flux cleaned = 0.00200216 Jy ! Total flux subtracted in 200 components = 0.00200216 Jy ! Clean residual min=-0.003358 max=0.003309 Jy/beam ! Clean residual mean=-0.000010 rms=0.000877 Jy/beam ! Combined flux in latest and established models = 0.168349 Jy ! Performing phase self-cal ! Adding 22 model components to the UV plane model. ! The established model now contains 138 components and 0.168349 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.128854Jy sigma=0.000705 ! Fit after self-cal, rms=0.128854Jy sigma=0.000705 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.128854Jy sigma=0.000705 ! Fit after self-cal, rms=0.129123Jy sigma=0.000705 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=9.233 mas, bmaj=33.98 mas, bpa=-8.307 degrees ! Estimated noise=1524.57 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000938634 Jy ! Component: 100 - total flux cleaned = 0.00112861 Jy ! Component: 150 - total flux cleaned = 0.00124747 Jy ! Component: 200 - total flux cleaned = 0.00127293 Jy ! Total flux subtracted in 200 components = 0.00127293 Jy ! Clean residual min=-0.003995 max=0.003021 Jy/beam ! Clean residual mean=-0.000015 rms=0.000995 Jy/beam ! Combined flux in latest and established models = 0.169622 Jy selfcal ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 157 components and 0.169622 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.129087Jy sigma=0.000705 ! Fit after self-cal, rms=0.129111Jy sigma=0.000705 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000193156 Jy ! Component: 100 - total flux cleaned = 0.000193102 Jy ! Component: 150 - total flux cleaned = 0.000145633 Jy ! Component: 200 - total flux cleaned = 0.000100111 Jy ! Total flux subtracted in 200 components = 0.000100111 Jy ! Clean residual min=-0.003972 max=0.003025 Jy/beam ! Clean residual mean=-0.000016 rms=0.000992 Jy/beam ! Combined flux in latest and established models = 0.169722 Jy ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 163 components and 0.169722 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.129094Jy sigma=0.000705 ! Fit after self-cal, rms=0.129096Jy sigma=0.000705 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.551 mas, bmaj=17.46 mas, bpa=-18.51 degrees ! Estimated noise=1318.63 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.551 x 17.46 at -18.51 degrees (North through East) ! Clean map min=-0.0031582 max=0.13684 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.601 mas, bmaj=13.55 mas, bpa=-18.91 degrees ! Estimated noise=1971.62 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.103719 Jy ! Component: 100 - total flux cleaned = 0.128791 Jy ! Component: 150 - total flux cleaned = 0.141247 Jy ! Component: 200 - total flux cleaned = 0.1495 Jy ! Total flux subtracted in 200 components = 0.1495 Jy ! Clean residual min=-0.005331 max=0.005329 Jy/beam ! Clean residual mean=0.000005 rms=0.001421 Jy/beam ! Combined flux in latest and established models = 0.1495 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 37 model components to the UV plane model. ! The established model now contains 37 components and 0.1495 Jy ! Inverting map and beam ! Estimated beam: bmin=3.551 mas, bmaj=17.46 mas, bpa=-18.51 degrees ! Estimated noise=1318.63 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00872066 Jy ! Component: 100 - total flux cleaned = 0.0130248 Jy ! Component: 150 - total flux cleaned = 0.0142326 Jy ! Component: 200 - total flux cleaned = 0.0150143 Jy ! Total flux subtracted in 200 components = 0.0150143 Jy ! Clean residual min=-0.003463 max=0.003329 Jy/beam ! Clean residual mean=-0.000008 rms=0.000919 Jy/beam ! Combined flux in latest and established models = 0.164514 Jy ! Adding 43 model components to the UV plane model. ! The established model now contains 76 components and 0.164514 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=9.233 mas, bmaj=33.98 mas, bpa=-8.307 degrees ! Estimated noise=1524.57 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00231111 Jy ! Component: 100 - total flux cleaned = 0.00287017 Jy ! Component: 150 - total flux cleaned = 0.00318858 Jy ! Component: 200 - total flux cleaned = 0.00337883 Jy ! Total flux subtracted in 200 components = 0.00337883 Jy ! Clean residual min=-0.004088 max=0.003316 Jy/beam ! Clean residual mean=-0.000016 rms=0.001002 Jy/beam ! Combined flux in latest and established models = 0.167893 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00013231 Jy ! Component: 100 - total flux cleaned = 0.000132209 Jy ! Component: 150 - total flux cleaned = 0.000102455 Jy ! Component: 200 - total flux cleaned = 0.000132415 Jy ! Total flux subtracted in 200 components = 0.000132415 Jy ! Clean residual min=-0.004054 max=0.003274 Jy/beam ! Clean residual mean=-0.000016 rms=0.000994 Jy/beam ! Combined flux in latest and established models = 0.168025 Jy ! Adding 57 model components to the UV plane model. ! The established model now contains 132 components and 0.168025 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.551 mas, bmaj=17.46 mas, bpa=-18.51 degrees ! Estimated noise=1318.63 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000245848 Jy ! Component: 100 - total flux cleaned = -0.000316626 Jy ! Component: 150 - total flux cleaned = -0.000316481 Jy ! Component: 200 - total flux cleaned = -0.00026026 Jy ! Total flux subtracted in 200 components = -0.00026026 Jy ! Clean residual min=-0.003273 max=0.003164 Jy/beam ! Clean residual mean=-0.000008 rms=0.000862 Jy/beam ! Combined flux in latest and established models = 0.167765 Jy selfcal ! Performing phase self-cal ! Adding 26 model components to the UV plane model. ! The established model now contains 154 components and 0.167765 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.129092Jy sigma=0.000705 ! Fit after self-cal, rms=0.129065Jy sigma=0.000705 wmodel J1607-3331_S_2017_10_21_pus_map.mod ! Writing 154 model components to file: J1607-3331_S_2017_10_21_pus_map.mod wobs J1607-3331_S_2017_10_21_pus_uvs.fits ! Writing UV FITS file: J1607-3331_S_2017_10_21_pus_uvs.fits wwins J1607-3331_S_2017_10_21_pus_map.win ! wwins: Wrote 2 windows to J1607-3331_S_2017_10_21_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.000616878 Jy ! Component: 100 - total flux cleaned = -0.000671704 Jy ! Component: 150 - total flux cleaned = -0.00061852 Jy ! Component: 200 - total flux cleaned = -0.000669735 Jy ! Component: 250 - total flux cleaned = -0.000719056 Jy ! Component: 300 - total flux cleaned = -0.000718654 Jy ! Component: 350 - total flux cleaned = -0.000627574 Jy ! Component: 400 - total flux cleaned = -0.000405284 Jy ! Component: 450 - total flux cleaned = -0.000102166 Jy ! Component: 500 - total flux cleaned = -5.98863e-05 Jy ! Component: 550 - total flux cleaned = -1.82131e-05 Jy ! Component: 600 - total flux cleaned = 2.2649e-05 Jy ! Component: 650 - total flux cleaned = -5.75198e-05 Jy ! Component: 700 - total flux cleaned = -9.69382e-05 Jy ! Component: 750 - total flux cleaned = -0.000135822 Jy ! Component: 800 - total flux cleaned = -5.87654e-05 Jy ! Component: 850 - total flux cleaned = -2.0924e-05 Jy ! Component: 900 - total flux cleaned = 0.000128292 Jy ! Component: 950 - total flux cleaned = 0.000128443 Jy ! Component: 1000 - total flux cleaned = 0.000237522 Jy ! Component: 1050 - total flux cleaned = 0.000345644 Jy ! Component: 1100 - total flux cleaned = 0.000452307 Jy ! Component: 1150 - total flux cleaned = 0.000522507 Jy ! Component: 1200 - total flux cleaned = 0.000660653 Jy ! Component: 1250 - total flux cleaned = 0.000660746 Jy ! Component: 1300 - total flux cleaned = 0.000728555 Jy ! Component: 1350 - total flux cleaned = 0.000795686 Jy ! Component: 1400 - total flux cleaned = 0.000762261 Jy ! Component: 1450 - total flux cleaned = 0.000762305 Jy ! Component: 1500 - total flux cleaned = 0.000762985 Jy ! Component: 1550 - total flux cleaned = 0.000698801 Jy ! Component: 1600 - total flux cleaned = 0.00073093 Jy ! Component: 1650 - total flux cleaned = 0.000635695 Jy ! Component: 1700 - total flux cleaned = 0.000510624 Jy ! Component: 1750 - total flux cleaned = 0.000510864 Jy ! Component: 1800 - total flux cleaned = 0.000418534 Jy ! Component: 1850 - total flux cleaned = 0.000326842 Jy ! Component: 1900 - total flux cleaned = 0.000265949 Jy ! Component: 1950 - total flux cleaned = 5.5526e-05 Jy ! Component: 2000 - total flux cleaned = -0.000152696 Jy ! Component: 2050 - total flux cleaned = -0.000123134 Jy ! Component: 2100 - total flux cleaned = -0.000298709 Jy ! Component: 2150 - total flux cleaned = -0.000415189 Jy ! Component: 2200 - total flux cleaned = -0.000501891 Jy ! Component: 2250 - total flux cleaned = -0.000703049 Jy ! Component: 2300 - total flux cleaned = -0.000788519 Jy ! Component: 2350 - total flux cleaned = -0.000873435 Jy ! Component: 2400 - total flux cleaned = -0.000957895 Jy ! Component: 2450 - total flux cleaned = -0.00109782 Jy ! Component: 2500 - total flux cleaned = -0.00123653 Jy ! Component: 2550 - total flux cleaned = -0.00134711 Jy ! Component: 2600 - total flux cleaned = -0.0015663 Jy ! Component: 2650 - total flux cleaned = -0.00167534 Jy ! Component: 2700 - total flux cleaned = -0.00178367 Jy ! Component: 2750 - total flux cleaned = -0.00191833 Jy ! Component: 2800 - total flux cleaned = -0.00202551 Jy ! Component: 2850 - total flux cleaned = -0.00213211 Jy ! Component: 2900 - total flux cleaned = -0.0022645 Jy ! Component: 2950 - total flux cleaned = -0.00247511 Jy ! Component: 3000 - total flux cleaned = -0.00252768 Jy ! Component: 3050 - total flux cleaned = -0.0026579 Jy ! Component: 3100 - total flux cleaned = -0.00278749 Jy ! Component: 3150 - total flux cleaned = -0.00294196 Jy ! Component: 3200 - total flux cleaned = -0.00312151 Jy ! Component: 3250 - total flux cleaned = -0.00314689 Jy ! Component: 3300 - total flux cleaned = -0.00335001 Jy ! Component: 3350 - total flux cleaned = -0.00347621 Jy ! Component: 3400 - total flux cleaned = -0.00350117 Jy ! Component: 3450 - total flux cleaned = -0.00360124 Jy ! Component: 3500 - total flux cleaned = -0.0037259 Jy ! Component: 3550 - total flux cleaned = -0.00380027 Jy ! Component: 3600 - total flux cleaned = -0.00394818 Jy ! Component: 3650 - total flux cleaned = -0.0039972 Jy ! Component: 3700 - total flux cleaned = -0.00404607 Jy ! Component: 3750 - total flux cleaned = -0.0041921 Jy ! Component: 3800 - total flux cleaned = -0.00424035 Jy ! Component: 3850 - total flux cleaned = -0.00436083 Jy ! Component: 3900 - total flux cleaned = -0.00445668 Jy ! Component: 3950 - total flux cleaned = -0.00445661 Jy ! Component: 4000 - total flux cleaned = -0.00457561 Jy ! Component: 4050 - total flux cleaned = -0.0046703 Jy ! Total flux subtracted in 4096 components = -0.0047646 Jy ! Clean residual min=-0.001192 max=0.001288 Jy/beam ! Clean residual mean=-0.000010 rms=0.000485 Jy/beam ! Combined flux in latest and established models = 0.163001 Jy keep ! Adding 287 model components to the UV plane model. ! The established model now contains 441 components and 0.163001 Jy ![Exited script file: muppet] wmap "J1607-3331_S_2017_10_21_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.551 x 17.46 at -18.51 degrees (North through East) ! Clean map min=-0.0030963 max=0.13834 Jy/beam ! Writing clean map to FITS file: J1607-3331_S_2017_10_21_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.138342 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000486086 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -1.05409 1.05409 2.10819 4.21637 8.43275 16.8655 33.731 67.462 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0014 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.138 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.551 x 17.46 at -18.51 degrees (North through East) ! Clean map min=-0.0030963 max=0.13834 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J1607-3331_S_2017_10_21_pus_uvs.log closed on Sat May 11 21:01:40 2019