! Started logfile: J1607-3331_S_2017_10_09_pus_uvs.log on Sun May 12 13:15:32 2019 obs J1607-3331_S_2017_10_09_pus_uva.fits ! Reading UV FITS file: J1607-3331_S_2017_10_09_pus_uva.fits ! AN table 1: 26 integrations on 36 of 36 possible baselines. ! Apparent sampling: 0.681624 visibilities/baseline/integration-bin. ! Found source: J1607-3331 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 496 lines of history. ! ! Reading 2552 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J1607-3331_S_2017_10_09_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 41 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 41 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 41 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 135 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.936786Jy sigma=0.006921 ! Fit after self-cal, rms=0.901578Jy sigma=0.006635 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.512 mas, bmaj=12.71 mas, bpa=-18.85 degrees ! Estimated noise=2884.11 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0682216 Jy ! Component: 100 - total flux cleaned = 0.0951813 Jy ! Total flux subtracted in 100 components = 0.0951813 Jy ! Clean residual min=-0.011662 max=0.015320 Jy/beam ! Clean residual mean=0.000020 rms=0.003306 Jy/beam ! Combined flux in latest and established models = 0.0951813 Jy ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 18 components and 0.0951813 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.109910Jy sigma=0.000742 ! Fit after self-cal, rms=0.109407Jy sigma=0.000738 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.063 mas, bmaj=14.45 mas, bpa=-19.64 degrees ! Estimated noise=2159.44 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0236872 Jy ! Component: 100 - total flux cleaned = 0.0367985 Jy ! Component: 150 - total flux cleaned = 0.0448036 Jy ! Component: 200 - total flux cleaned = 0.0478869 Jy ! Total flux subtracted in 200 components = 0.0478869 Jy ! Clean residual min=-0.009921 max=0.011646 Jy/beam ! Clean residual mean=-0.000066 rms=0.002465 Jy/beam ! Combined flux in latest and established models = 0.143068 Jy ! Performing phase self-cal ! Adding 28 model components to the UV plane model. ! The established model now contains 35 components and 0.143068 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.103139Jy sigma=0.000703 ! Fit after self-cal, rms=0.102825Jy sigma=0.000702 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.32 FD 0.88 HN 1.30 KP 1.04 ! LA 0.92 MK 0.88 NL 0.95 OV 1.00* ! PT 0.94 ! ! ! Correcting IF 2. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.76 FD 0.96 HN 1.21 KP 1.09 ! LA 0.87 MK 1.19 NL 1.00 OV 1.00* ! PT 0.91 ! ! ! Correcting IF 3. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.26 FD 0.94 HN 1.31 KP 0.80 ! LA 0.77 MK 0.97 NL 1.10 OV 1.00* ! PT 0.91 ! ! ! Correcting IF 4. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 0.99 HN 1.10 KP 1.00* ! LA 1.14 MK 1.00 NL 1.00* OV 1.00* ! PT 0.96 ! ! ! Fit before self-cal, rms=0.102825Jy sigma=0.000702 ! Fit after self-cal, rms=0.109660Jy sigma=0.000682 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.096 mas, bmaj=15.61 mas, bpa=-20.55 degrees ! Estimated noise=2288.04 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00250927 Jy ! Component: 100 - total flux cleaned = -0.00273318 Jy ! Component: 150 - total flux cleaned = -0.00281528 Jy ! Component: 200 - total flux cleaned = -0.00288527 Jy ! Total flux subtracted in 200 components = -0.00288527 Jy ! Clean residual min=-0.006862 max=0.005469 Jy/beam ! Clean residual mean=-0.000011 rms=0.001550 Jy/beam ! Combined flux in latest and established models = 0.140183 Jy ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 53 components and 0.140183 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.109397Jy sigma=0.000681 ! Fit after self-cal, rms=0.109567Jy sigma=0.000680 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.109567Jy sigma=0.000680 ! Fit after self-cal, rms=0.113448Jy sigma=0.000679 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.123 mas, bmaj=15.86 mas, bpa=-20.8 degrees ! Estimated noise=2321.17 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00179973 Jy ! Component: 100 - total flux cleaned = -0.00204409 Jy ! Component: 150 - total flux cleaned = -0.00217571 Jy ! Component: 200 - total flux cleaned = -0.00223132 Jy ! Total flux subtracted in 200 components = -0.00223132 Jy ! Clean residual min=-0.006719 max=0.005422 Jy/beam ! Clean residual mean=-0.000009 rms=0.001527 Jy/beam ! Combined flux in latest and established models = 0.137952 Jy selfcal ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 60 components and 0.137952 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.113297Jy sigma=0.000679 ! Fit after self-cal, rms=0.113344Jy sigma=0.000679 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000752574 Jy ! Component: 100 - total flux cleaned = -0.00075594 Jy ! Component: 150 - total flux cleaned = -0.000709922 Jy ! Component: 200 - total flux cleaned = -0.00071268 Jy ! Total flux subtracted in 200 components = -0.00071268 Jy ! Clean residual min=-0.006468 max=0.005294 Jy/beam ! Clean residual mean=-0.000012 rms=0.001511 Jy/beam ! Combined flux in latest and established models = 0.137239 Jy ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 72 components and 0.137239 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.113275Jy sigma=0.000678 ! Fit after self-cal, rms=0.113251Jy sigma=0.000678 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.113251Jy sigma=0.000678 ! Fit after self-cal, rms=0.121460Jy sigma=0.000672 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.139 mas, bmaj=15.98 mas, bpa=-21.03 degrees ! Estimated noise=2345.58 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00146196 Jy ! Component: 100 - total flux cleaned = -0.00171953 Jy ! Component: 150 - total flux cleaned = -0.00192329 Jy ! Component: 200 - total flux cleaned = -0.00204728 Jy ! Total flux subtracted in 200 components = -0.00204728 Jy ! Clean residual min=-0.005841 max=0.004879 Jy/beam ! Clean residual mean=-0.000016 rms=0.001368 Jy/beam ! Combined flux in latest and established models = 0.135192 Jy selfcal ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 82 components and 0.135192 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.121372Jy sigma=0.000672 ! Fit after self-cal, rms=0.121589Jy sigma=0.000672 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000589196 Jy ! Component: 100 - total flux cleaned = -0.000628072 Jy ! Component: 150 - total flux cleaned = -0.000629433 Jy ! Component: 200 - total flux cleaned = -0.000597815 Jy ! Total flux subtracted in 200 components = -0.000597815 Jy ! Clean residual min=-0.005660 max=0.004795 Jy/beam ! Clean residual mean=-0.000016 rms=0.001356 Jy/beam ! Combined flux in latest and established models = 0.134594 Jy ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 88 components and 0.134594 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.121555Jy sigma=0.000671 ! Fit after self-cal, rms=0.121539Jy sigma=0.000671 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.121539Jy sigma=0.000671 ! Fit after self-cal, rms=0.125968Jy sigma=0.000671 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.494 mas, bmaj=30.4 mas, bpa=-5.901 degrees ! Estimated noise=2800.36 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00114425 Jy ! Component: 100 - total flux cleaned = -0.00119071 Jy ! Component: 150 - total flux cleaned = -0.00121214 Jy ! Component: 200 - total flux cleaned = -0.00123194 Jy ! Total flux subtracted in 200 components = -0.00123194 Jy ! Clean residual min=-0.005195 max=0.005464 Jy/beam ! Clean residual mean=-0.000026 rms=0.001528 Jy/beam ! Combined flux in latest and established models = 0.133362 Jy selfcal ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 96 components and 0.133362 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.125939Jy sigma=0.000671 ! Fit after self-cal, rms=0.125997Jy sigma=0.000671 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000209131 Jy ! Component: 100 - total flux cleaned = -0.000209369 Jy ! Component: 150 - total flux cleaned = -0.000192247 Jy ! Component: 200 - total flux cleaned = -0.000144109 Jy ! Total flux subtracted in 200 components = -0.000144109 Jy ! Clean residual min=-0.005223 max=0.005515 Jy/beam ! Clean residual mean=-0.000026 rms=0.001525 Jy/beam ! Combined flux in latest and established models = 0.133218 Jy ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 103 components and 0.133218 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.125987Jy sigma=0.000671 ! Fit after self-cal, rms=0.125975Jy sigma=0.000671 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.163 mas, bmaj=16.18 mas, bpa=-21.29 degrees ! Estimated noise=2366.17 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.163 x 16.18 at -21.29 degrees (North through East) ! Clean map min=-0.0062207 max=0.098612 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.554 mas, bmaj=13.99 mas, bpa=-20.49 degrees ! Estimated noise=3410.27 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.077081 Jy ! Component: 100 - total flux cleaned = 0.103299 Jy ! Component: 150 - total flux cleaned = 0.113254 Jy ! Component: 200 - total flux cleaned = 0.116843 Jy ! Total flux subtracted in 200 components = 0.116843 Jy ! Clean residual min=-0.008394 max=0.010083 Jy/beam ! Clean residual mean=0.000012 rms=0.002448 Jy/beam ! Combined flux in latest and established models = 0.116843 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 34 model components to the UV plane model. ! The established model now contains 34 components and 0.116843 Jy ! Inverting map and beam ! Estimated beam: bmin=3.163 mas, bmaj=16.18 mas, bpa=-21.29 degrees ! Estimated noise=2366.17 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00830543 Jy ! Component: 100 - total flux cleaned = 0.0110663 Jy ! Component: 150 - total flux cleaned = 0.0118498 Jy ! Component: 200 - total flux cleaned = 0.0125339 Jy ! Total flux subtracted in 200 components = 0.0125339 Jy ! Clean residual min=-0.005939 max=0.004619 Jy/beam ! Clean residual mean=-0.000021 rms=0.001404 Jy/beam ! Combined flux in latest and established models = 0.129377 Jy ! Adding 29 model components to the UV plane model. ! The established model now contains 60 components and 0.129377 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.494 mas, bmaj=30.4 mas, bpa=-5.901 degrees ! Estimated noise=2800.36 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00170495 Jy ! Component: 100 - total flux cleaned = 0.00174613 Jy ! Component: 150 - total flux cleaned = 0.0017848 Jy ! Component: 200 - total flux cleaned = 0.00181957 Jy ! Total flux subtracted in 200 components = 0.00181957 Jy ! Clean residual min=-0.005547 max=0.005867 Jy/beam ! Clean residual mean=-0.000035 rms=0.001597 Jy/beam ! Combined flux in latest and established models = 0.131196 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 3.12885e-05 Jy ! Component: 100 - total flux cleaned = 6.03574e-05 Jy ! Component: 150 - total flux cleaned = 8.69976e-05 Jy ! Component: 200 - total flux cleaned = 0.000112405 Jy ! Total flux subtracted in 200 components = 0.000112405 Jy ! Clean residual min=-0.005484 max=0.005769 Jy/beam ! Clean residual mean=-0.000034 rms=0.001592 Jy/beam ! Combined flux in latest and established models = 0.131309 Jy ! Adding 21 model components to the UV plane model. ! The established model now contains 79 components and 0.131309 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.163 mas, bmaj=16.18 mas, bpa=-21.29 degrees ! Estimated noise=2366.17 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00040046 Jy ! Component: 100 - total flux cleaned = -0.000355161 Jy ! Component: 150 - total flux cleaned = -0.000316449 Jy ! Component: 200 - total flux cleaned = -0.000209053 Jy ! Total flux subtracted in 200 components = -0.000209053 Jy ! Clean residual min=-0.005786 max=0.004589 Jy/beam ! Clean residual mean=-0.000018 rms=0.001371 Jy/beam ! Combined flux in latest and established models = 0.1311 Jy selfcal ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 89 components and 0.1311 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.125960Jy sigma=0.000671 ! Fit after self-cal, rms=0.125833Jy sigma=0.000671 wmodel J1607-3331_S_2017_10_09_pus_map.mod ! Writing 89 model components to file: J1607-3331_S_2017_10_09_pus_map.mod wobs J1607-3331_S_2017_10_09_pus_uvs.fits ! Writing UV FITS file: J1607-3331_S_2017_10_09_pus_uvs.fits wwins J1607-3331_S_2017_10_09_pus_map.win ! wwins: Wrote 1 windows to J1607-3331_S_2017_10_09_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.00248393 Jy ! Component: 100 - total flux cleaned = -0.00361386 Jy ! Component: 150 - total flux cleaned = -0.00402162 Jy ! Component: 200 - total flux cleaned = -0.00448431 Jy ! Component: 250 - total flux cleaned = -0.00507468 Jy ! Component: 300 - total flux cleaned = -0.00542961 Jy ! Component: 350 - total flux cleaned = -0.00604403 Jy ! Component: 400 - total flux cleaned = -0.00637455 Jy ! Component: 450 - total flux cleaned = -0.00663016 Jy ! Component: 500 - total flux cleaned = -0.00687742 Jy ! Component: 550 - total flux cleaned = -0.00687716 Jy ! Component: 600 - total flux cleaned = -0.00658317 Jy ! Component: 650 - total flux cleaned = -0.00675766 Jy ! Component: 700 - total flux cleaned = -0.00670204 Jy ! Component: 750 - total flux cleaned = -0.00670065 Jy ! Component: 800 - total flux cleaned = -0.00653964 Jy ! Component: 850 - total flux cleaned = -0.00653894 Jy ! Component: 900 - total flux cleaned = -0.00638331 Jy ! Component: 950 - total flux cleaned = -0.00628161 Jy ! Component: 1000 - total flux cleaned = -0.00638048 Jy ! Component: 1050 - total flux cleaned = -0.00613471 Jy ! Component: 1100 - total flux cleaned = -0.00603809 Jy ! Component: 1150 - total flux cleaned = -0.00598979 Jy ! Component: 1200 - total flux cleaned = -0.00580002 Jy ! Component: 1250 - total flux cleaned = -0.00561431 Jy ! Component: 1300 - total flux cleaned = -0.00538546 Jy ! Component: 1350 - total flux cleaned = -0.00547548 Jy ! Component: 1400 - total flux cleaned = -0.00511881 Jy ! Component: 1450 - total flux cleaned = -0.00507515 Jy ! Component: 1500 - total flux cleaned = -0.00494478 Jy ! Component: 1550 - total flux cleaned = -0.00468771 Jy ! Component: 1600 - total flux cleaned = -0.00460326 Jy ! Component: 1650 - total flux cleaned = -0.00439449 Jy ! Component: 1700 - total flux cleaned = -0.00427112 Jy ! Component: 1750 - total flux cleaned = -0.00410785 Jy ! Component: 1800 - total flux cleaned = -0.00386684 Jy ! Component: 1850 - total flux cleaned = -0.0037872 Jy ! Component: 1900 - total flux cleaned = -0.00362939 Jy ! Component: 1950 - total flux cleaned = -0.00339678 Jy ! Component: 2000 - total flux cleaned = -0.00331981 Jy ! Component: 2050 - total flux cleaned = -0.00320474 Jy ! Component: 2100 - total flux cleaned = -0.00316675 Jy ! Component: 2150 - total flux cleaned = -0.00298088 Jy ! Component: 2200 - total flux cleaned = -0.00275941 Jy ! Component: 2250 - total flux cleaned = -0.00254076 Jy ! Component: 2300 - total flux cleaned = -0.00243224 Jy ! Component: 2350 - total flux cleaned = -0.00225328 Jy ! Component: 2400 - total flux cleaned = -0.00207587 Jy ! Component: 2450 - total flux cleaned = -0.00193554 Jy ! Component: 2500 - total flux cleaned = -0.00162281 Jy ! Component: 2550 - total flux cleaned = -0.00165711 Jy ! Component: 2600 - total flux cleaned = -0.00138342 Jy ! Component: 2650 - total flux cleaned = -0.00131551 Jy ! Component: 2700 - total flux cleaned = -0.00118076 Jy ! Component: 2750 - total flux cleaned = -0.00104704 Jy ! Component: 2800 - total flux cleaned = -0.000848443 Jy ! Component: 2850 - total flux cleaned = -0.000783355 Jy ! Component: 2900 - total flux cleaned = -0.000816003 Jy ! Component: 2950 - total flux cleaned = -0.000686593 Jy ! Component: 3000 - total flux cleaned = -0.000558524 Jy ! Component: 3050 - total flux cleaned = -0.000463463 Jy ! Component: 3100 - total flux cleaned = -0.000399991 Jy ! Component: 3150 - total flux cleaned = -0.000242951 Jy ! Component: 3200 - total flux cleaned = -8.70468e-05 Jy ! Component: 3250 - total flux cleaned = -0.000211215 Jy ! Component: 3300 - total flux cleaned = -2.59234e-05 Jy ! Component: 3350 - total flux cleaned = -2.62283e-05 Jy ! Component: 3400 - total flux cleaned = 9.49861e-05 Jy ! Component: 3450 - total flux cleaned = 0.000125119 Jy ! Component: 3500 - total flux cleaned = 0.000184876 Jy ! Component: 3550 - total flux cleaned = 0.000274048 Jy ! Component: 3600 - total flux cleaned = 0.000155707 Jy ! Component: 3650 - total flux cleaned = 0.000243941 Jy ! Component: 3700 - total flux cleaned = 0.000273119 Jy ! Component: 3750 - total flux cleaned = 0.00038915 Jy ! Component: 3800 - total flux cleaned = 0.00041801 Jy ! Component: 3850 - total flux cleaned = 0.000446589 Jy ! Component: 3900 - total flux cleaned = 0.000532246 Jy ! Component: 3950 - total flux cleaned = 0.000617448 Jy ! Component: 4000 - total flux cleaned = 0.000758357 Jy ! Component: 4050 - total flux cleaned = 0.000729923 Jy ! Total flux subtracted in 4096 components = 0.000897105 Jy ! Clean residual min=-0.001919 max=0.001593 Jy/beam ! Clean residual mean=0.000021 rms=0.000526 Jy/beam ! Combined flux in latest and established models = 0.131997 Jy keep ! Adding 256 model components to the UV plane model. ! The established model now contains 345 components and 0.131997 Jy ![Exited script file: muppet] wmap "J1607-3331_S_2017_10_09_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.163 x 16.18 at -21.29 degrees (North through East) ! Clean map min=-0.0073763 max=0.105 Jy/beam ! Writing clean map to FITS file: J1607-3331_S_2017_10_09_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.105004 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000523026 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -1.4943 1.4943 2.9886 5.97719 11.9544 23.9088 47.8175 95.6351 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0015 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.105 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.163 x 16.18 at -21.29 degrees (North through East) ! Clean map min=-0.0073763 max=0.105 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J1607-3331_S_2017_10_09_pus_uvs.log closed on Sun May 12 13:15:37 2019