! Started logfile: J1607-3331_S_2017_07_09_pus_uvs.log on Wed May 8 14:52:39 2019 obs J1607-3331_S_2017_07_09_pus_uva.fits ! Reading UV FITS file: J1607-3331_S_2017_07_09_pus_uva.fits ! AN table 1: 77 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.585859 visibilities/baseline/integration-bin. ! Found source: J1607-3331 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 594 lines of history. ! ! Reading 8120 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J1607-3331_S_2017_07_09_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 252 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 213 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 175 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 488 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.886993Jy sigma=0.006339 ! Fit after self-cal, rms=0.869129Jy sigma=0.006222 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.328 mas, bmaj=5.966 mas, bpa=-2.448 degrees ! Estimated noise=1661.65 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0989617 Jy ! Component: 100 - total flux cleaned = 0.125788 Jy ! Total flux subtracted in 100 components = 0.125788 Jy ! Clean residual min=-0.006941 max=0.013034 Jy/beam ! Clean residual mean=-0.000009 rms=0.001828 Jy/beam ! Combined flux in latest and established models = 0.125788 Jy ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 13 components and 0.125788 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.101057Jy sigma=0.000696 ! Fit after self-cal, rms=0.101027Jy sigma=0.000696 ! Inverting map ! Added new window around map position (-3.5, 8.5). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0138387 Jy ! Component: 100 - total flux cleaned = 0.0221507 Jy ! Total flux subtracted in 100 components = 0.0221507 Jy ! Clean residual min=-0.006985 max=0.009054 Jy/beam ! Clean residual mean=-0.000002 rms=0.001540 Jy/beam ! Combined flux in latest and established models = 0.147939 Jy ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 27 components and 0.147939 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.098336Jy sigma=0.000674 ! Fit after self-cal, rms=0.098285Jy sigma=0.000674 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.911 mas, bmaj=7.156 mas, bpa=-2.383 degrees ! Estimated noise=1313.72 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-3, -7). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00933039 Jy ! Component: 100 - total flux cleaned = 0.0128935 Jy ! Component: 150 - total flux cleaned = 0.0133669 Jy ! Component: 200 - total flux cleaned = 0.0137941 Jy ! Total flux subtracted in 200 components = 0.0137941 Jy ! Clean residual min=-0.005528 max=0.004860 Jy/beam ! Clean residual mean=-0.000013 rms=0.001158 Jy/beam ! Combined flux in latest and established models = 0.161733 Jy ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 43 components and 0.161733 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.097348Jy sigma=0.000666 ! Fit after self-cal, rms=0.097300Jy sigma=0.000666 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 0.98 HN 1.00* KP 0.98 ! LA 0.99 MK 0.99 NL 1.00* OV 0.99 ! PT 1.02 SC 0.98 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00 HN 1.00* KP 0.94 ! LA 0.95 MK 1.02 NL 1.19 OV 0.99 ! PT 0.98 SC 1.06 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.04 HN 1.00* KP 0.98 ! LA 0.96 MK 1.01 NL 1.17 OV 0.93 ! PT 0.98 SC 0.99 ! ! ! Correcting IF 4. ! A total of 6 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00 HN 1.00* KP 1.00* ! LA 1.02 MK 1.05 NL 1.00* OV 1.00* ! PT 1.01 SC 1.00* ! ! ! Fit before self-cal, rms=0.097300Jy sigma=0.000666 ! Fit after self-cal, rms=0.099209Jy sigma=0.000663 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.933 mas, bmaj=7.204 mas, bpa=-2.23 degrees ! Estimated noise=1310.14 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00231358 Jy ! Component: 100 - total flux cleaned = -0.00195025 Jy ! Component: 150 - total flux cleaned = -0.00184833 Jy ! Component: 200 - total flux cleaned = -0.00184379 Jy ! Total flux subtracted in 200 components = -0.00184379 Jy ! Clean residual min=-0.005228 max=0.004548 Jy/beam ! Clean residual mean=-0.000002 rms=0.001047 Jy/beam ! Combined flux in latest and established models = 0.159889 Jy ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 53 components and 0.159889 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.098905Jy sigma=0.000661 ! Fit after self-cal, rms=0.098967Jy sigma=0.000661 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.098967Jy sigma=0.000661 ! Fit after self-cal, rms=0.109518Jy sigma=0.000655 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.945 mas, bmaj=7.498 mas, bpa=-3.67 degrees ! Estimated noise=1323.58 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00048322 Jy ! Component: 100 - total flux cleaned = -0.000487549 Jy ! Component: 150 - total flux cleaned = -0.000427463 Jy ! Component: 200 - total flux cleaned = -0.000376011 Jy ! Total flux subtracted in 200 components = -0.000376011 Jy ! Clean residual min=-0.004161 max=0.004048 Jy/beam ! Clean residual mean=-0.000003 rms=0.000859 Jy/beam ! Combined flux in latest and established models = 0.159513 Jy selfcal ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 66 components and 0.159513 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.109433Jy sigma=0.000655 ! Fit after self-cal, rms=0.109728Jy sigma=0.000654 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -1.92493e-05 Jy ! Component: 100 - total flux cleaned = -1.99292e-05 Jy ! Component: 150 - total flux cleaned = 2.35469e-05 Jy ! Component: 200 - total flux cleaned = 2.52837e-05 Jy ! Total flux subtracted in 200 components = 2.52837e-05 Jy ! Clean residual min=-0.004117 max=0.004020 Jy/beam ! Clean residual mean=-0.000004 rms=0.000852 Jy/beam ! Combined flux in latest and established models = 0.159538 Jy ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 74 components and 0.159538 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.109686Jy sigma=0.000654 ! Fit after self-cal, rms=0.109683Jy sigma=0.000654 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.109683Jy sigma=0.000654 ! Fit after self-cal, rms=0.112974Jy sigma=0.000648 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.946 mas, bmaj=7.549 mas, bpa=-3.363 degrees ! Estimated noise=1324.26 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000406848 Jy ! Component: 100 - total flux cleaned = -0.000317573 Jy ! Component: 150 - total flux cleaned = -0.000315994 Jy ! Component: 200 - total flux cleaned = -0.000316266 Jy ! Total flux subtracted in 200 components = -0.000316266 Jy ! Clean residual min=-0.002875 max=0.003762 Jy/beam ! Clean residual mean=-0.000016 rms=0.000750 Jy/beam ! Combined flux in latest and established models = 0.159222 Jy selfcal ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 88 components and 0.159222 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.112937Jy sigma=0.000648 ! Fit after self-cal, rms=0.113170Jy sigma=0.000647 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-66, -93). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00303238 Jy ! Component: 100 - total flux cleaned = 0.00303916 Jy ! Component: 150 - total flux cleaned = 0.00294619 Jy ! Component: 200 - total flux cleaned = 0.00298993 Jy ! Total flux subtracted in 200 components = 0.00298993 Jy ! Clean residual min=-0.002970 max=0.003028 Jy/beam ! Clean residual mean=-0.000025 rms=0.000723 Jy/beam ! Combined flux in latest and established models = 0.162212 Jy ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 107 components and 0.162212 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.113053Jy sigma=0.000647 ! Fit after self-cal, rms=0.113016Jy sigma=0.000647 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.113016Jy sigma=0.000647 ! Fit after self-cal, rms=0.112790Jy sigma=0.000647 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=9.631 mas, bmaj=24.95 mas, bpa=-0.03616 degrees ! Estimated noise=1726.88 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000628233 Jy ! Component: 100 - total flux cleaned = 0.000659082 Jy ! Component: 150 - total flux cleaned = 0.000661256 Jy ! Component: 200 - total flux cleaned = 0.000680094 Jy ! Total flux subtracted in 200 components = 0.000680094 Jy ! Clean residual min=-0.002975 max=0.002726 Jy/beam ! Clean residual mean=-0.000039 rms=0.000821 Jy/beam ! Combined flux in latest and established models = 0.162892 Jy selfcal ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 114 components and 0.162892 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.112773Jy sigma=0.000646 ! Fit after self-cal, rms=0.112919Jy sigma=0.000646 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000139409 Jy ! Component: 100 - total flux cleaned = 0.000159867 Jy ! Component: 150 - total flux cleaned = 0.000160102 Jy ! Component: 200 - total flux cleaned = 0.000176848 Jy ! Total flux subtracted in 200 components = 0.000176848 Jy ! Clean residual min=-0.002959 max=0.002668 Jy/beam ! Clean residual mean=-0.000040 rms=0.000816 Jy/beam ! Combined flux in latest and established models = 0.163069 Jy ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 121 components and 0.163069 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.112910Jy sigma=0.000646 ! Fit after self-cal, rms=0.112906Jy sigma=0.000646 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=2.945 mas, bmaj=7.537 mas, bpa=-3.316 degrees ! Estimated noise=1320.29 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.945 x 7.537 at -3.316 degrees (North through East) ! Clean map min=-0.0029737 max=0.12731 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.337 mas, bmaj=6.224 mas, bpa=-3.307 degrees ! Estimated noise=1698.12 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.100227 Jy ! Component: 100 - total flux cleaned = 0.125579 Jy ! Component: 150 - total flux cleaned = 0.138181 Jy ! Component: 200 - total flux cleaned = 0.146174 Jy ! Total flux subtracted in 200 components = 0.146174 Jy ! Clean residual min=-0.004714 max=0.005980 Jy/beam ! Clean residual mean=-0.000006 rms=0.001122 Jy/beam ! Combined flux in latest and established models = 0.146174 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 31 model components to the UV plane model. ! The established model now contains 31 components and 0.146174 Jy ! Inverting map and beam ! Estimated beam: bmin=2.945 mas, bmaj=7.537 mas, bpa=-3.316 degrees ! Estimated noise=1320.29 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00803498 Jy ! Component: 100 - total flux cleaned = 0.0125343 Jy ! Component: 150 - total flux cleaned = 0.0155404 Jy ! Component: 200 - total flux cleaned = 0.0165541 Jy ! Total flux subtracted in 200 components = 0.0165541 Jy ! Clean residual min=-0.003130 max=0.003361 Jy/beam ! Clean residual mean=-0.000023 rms=0.000762 Jy/beam ! Combined flux in latest and established models = 0.162728 Jy ! Adding 28 model components to the UV plane model. ! The established model now contains 49 components and 0.162728 Jy ! Inverting map ! Added new window around map position (19, 7.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00253371 Jy ! Component: 100 - total flux cleaned = 0.0030118 Jy ! Component: 150 - total flux cleaned = 0.00322743 Jy ! Component: 200 - total flux cleaned = 0.00329588 Jy ! Total flux subtracted in 200 components = 0.00329588 Jy ! Clean residual min=-0.002975 max=0.002890 Jy/beam ! Clean residual mean=-0.000016 rms=0.000715 Jy/beam ! Combined flux in latest and established models = 0.166024 Jy ! Adding 30 model components to the UV plane model. ! The established model now contains 68 components and 0.166024 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=9.631 mas, bmaj=24.95 mas, bpa=-0.03616 degrees ! Estimated noise=1726.88 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000438122 Jy ! Component: 100 - total flux cleaned = 0.000255329 Jy ! Component: 150 - total flux cleaned = 0.000316681 Jy ! Component: 200 - total flux cleaned = 0.000398004 Jy ! Total flux subtracted in 200 components = 0.000398004 Jy ! Clean residual min=-0.002804 max=0.002075 Jy/beam ! Clean residual mean=-0.000026 rms=0.000767 Jy/beam ! Combined flux in latest and established models = 0.166422 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 1.68734e-06 Jy ! Component: 100 - total flux cleaned = 4.80396e-05 Jy ! Component: 150 - total flux cleaned = 4.73726e-05 Jy ! Component: 200 - total flux cleaned = 4.78117e-05 Jy ! Total flux subtracted in 200 components = 4.78117e-05 Jy ! Clean residual min=-0.002786 max=0.002092 Jy/beam ! Clean residual mean=-0.000025 rms=0.000763 Jy/beam ! Combined flux in latest and established models = 0.16647 Jy ! Adding 20 model components to the UV plane model. ! The established model now contains 86 components and 0.16647 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=2.945 mas, bmaj=7.537 mas, bpa=-3.316 degrees ! Estimated noise=1320.29 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000269522 Jy ! Component: 100 - total flux cleaned = -0.000270335 Jy ! Component: 150 - total flux cleaned = -0.00027383 Jy ! Component: 200 - total flux cleaned = -0.000382815 Jy ! Total flux subtracted in 200 components = -0.000382815 Jy ! Clean residual min=-0.002946 max=0.002774 Jy/beam ! Clean residual mean=-0.000014 rms=0.000696 Jy/beam ! Combined flux in latest and established models = 0.166087 Jy selfcal ! Performing phase self-cal ! Adding 27 model components to the UV plane model. ! The established model now contains 100 components and 0.166087 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.112976Jy sigma=0.000647 ! Fit after self-cal, rms=0.112913Jy sigma=0.000646 wmodel J1607-3331_S_2017_07_09_pus_map.mod ! Writing 100 model components to file: J1607-3331_S_2017_07_09_pus_map.mod wobs J1607-3331_S_2017_07_09_pus_uvs.fits ! Writing UV FITS file: J1607-3331_S_2017_07_09_pus_uvs.fits wwins J1607-3331_S_2017_07_09_pus_map.win ! wwins: Wrote 5 windows to J1607-3331_S_2017_07_09_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -5.30693e-05 Jy ! Component: 100 - total flux cleaned = -9.90001e-05 Jy ! Component: 150 - total flux cleaned = -0.000329699 Jy ! Component: 200 - total flux cleaned = -0.00046398 Jy ! Component: 250 - total flux cleaned = -0.000464784 Jy ! Component: 300 - total flux cleaned = -0.000465821 Jy ! Component: 350 - total flux cleaned = -0.000466412 Jy ! Component: 400 - total flux cleaned = -0.000588754 Jy ! Component: 450 - total flux cleaned = -0.000588738 Jy ! Component: 500 - total flux cleaned = -0.000667289 Jy ! Component: 550 - total flux cleaned = -0.000589387 Jy ! Component: 600 - total flux cleaned = -0.000474827 Jy ! Component: 650 - total flux cleaned = -0.000511934 Jy ! Component: 700 - total flux cleaned = -0.000400836 Jy ! Component: 750 - total flux cleaned = -0.000474075 Jy ! Component: 800 - total flux cleaned = -0.00036503 Jy ! Component: 850 - total flux cleaned = -0.000329535 Jy ! Component: 900 - total flux cleaned = -0.000329308 Jy ! Component: 950 - total flux cleaned = -0.000154674 Jy ! Component: 1000 - total flux cleaned = -1.62142e-05 Jy ! Component: 1050 - total flux cleaned = 0.000120455 Jy ! Component: 1100 - total flux cleaned = 0.00025524 Jy ! Component: 1150 - total flux cleaned = 0.000288703 Jy ! Component: 1200 - total flux cleaned = 0.000388044 Jy ! Component: 1250 - total flux cleaned = 0.000519496 Jy ! Component: 1300 - total flux cleaned = 0.000649399 Jy ! Component: 1350 - total flux cleaned = 0.000745602 Jy ! Component: 1400 - total flux cleaned = 0.000936184 Jy ! Component: 1450 - total flux cleaned = 0.00103028 Jy ! Component: 1500 - total flux cleaned = 0.00115468 Jy ! Component: 1550 - total flux cleaned = 0.00112371 Jy ! Component: 1600 - total flux cleaned = 0.00121592 Jy ! Component: 1650 - total flux cleaned = 0.00127675 Jy ! Component: 1700 - total flux cleaned = 0.00139751 Jy ! Component: 1750 - total flux cleaned = 0.0015168 Jy ! Component: 1800 - total flux cleaned = 0.00154595 Jy ! Component: 1850 - total flux cleaned = 0.00154615 Jy ! Component: 1900 - total flux cleaned = 0.00160436 Jy ! Component: 1950 - total flux cleaned = 0.00171964 Jy ! Component: 2000 - total flux cleaned = 0.00166254 Jy ! Component: 2050 - total flux cleaned = 0.00166268 Jy ! Component: 2100 - total flux cleaned = 0.00174737 Jy ! Component: 2150 - total flux cleaned = 0.00166372 Jy ! Component: 2200 - total flux cleaned = 0.0016082 Jy ! Component: 2250 - total flux cleaned = 0.00174586 Jy ! Component: 2300 - total flux cleaned = 0.00166394 Jy ! Component: 2350 - total flux cleaned = 0.00177274 Jy ! Component: 2400 - total flux cleaned = 0.00179952 Jy ! Component: 2450 - total flux cleaned = 0.00179935 Jy ! Component: 2500 - total flux cleaned = 0.00177294 Jy ! Component: 2550 - total flux cleaned = 0.00166706 Jy ! Component: 2600 - total flux cleaned = 0.00177217 Jy ! Component: 2650 - total flux cleaned = 0.00179785 Jy ! Component: 2700 - total flux cleaned = 0.00179748 Jy ! Component: 2750 - total flux cleaned = 0.0017977 Jy ! Component: 2800 - total flux cleaned = 0.00184904 Jy ! Component: 2850 - total flux cleaned = 0.00182355 Jy ! Component: 2900 - total flux cleaned = 0.00202503 Jy ! Component: 2950 - total flux cleaned = 0.00190017 Jy ! Component: 3000 - total flux cleaned = 0.00204934 Jy ! Component: 3050 - total flux cleaned = 0.00204929 Jy ! Component: 3100 - total flux cleaned = 0.00207393 Jy ! Component: 3150 - total flux cleaned = 0.00202487 Jy ! Component: 3200 - total flux cleaned = 0.00217052 Jy ! Component: 3250 - total flux cleaned = 0.00209837 Jy ! Component: 3300 - total flux cleaned = 0.00219436 Jy ! Component: 3350 - total flux cleaned = 0.00217044 Jy ! Component: 3400 - total flux cleaned = 0.00228862 Jy ! Component: 3450 - total flux cleaned = 0.00226492 Jy ! Component: 3500 - total flux cleaned = 0.00224168 Jy ! Component: 3550 - total flux cleaned = 0.00212543 Jy ! Component: 3600 - total flux cleaned = 0.00231019 Jy ! Component: 3650 - total flux cleaned = 0.00221817 Jy ! Component: 3700 - total flux cleaned = 0.00228679 Jy ! Component: 3750 - total flux cleaned = 0.00224156 Jy ! Component: 3800 - total flux cleaned = 0.00226409 Jy ! Component: 3850 - total flux cleaned = 0.00224148 Jy ! Component: 3900 - total flux cleaned = 0.00230837 Jy ! Component: 3950 - total flux cleaned = 0.00228611 Jy ! Component: 4000 - total flux cleaned = 0.00235248 Jy ! Component: 4050 - total flux cleaned = 0.00233038 Jy ! Total flux subtracted in 4096 components = 0.00230866 Jy ! Clean residual min=-0.001552 max=0.001271 Jy/beam ! Clean residual mean=-0.000001 rms=0.000398 Jy/beam ! Combined flux in latest and established models = 0.168396 Jy keep ! Adding 260 model components to the UV plane model. ! The established model now contains 360 components and 0.168396 Jy ![Exited script file: muppet] wmap "J1607-3331_S_2017_07_09_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.945 x 7.537 at -3.316 degrees (North through East) ! Clean map min=-0.0023387 max=0.12716 Jy/beam ! Writing clean map to FITS file: J1607-3331_S_2017_07_09_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.127159 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000398785 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.940836 0.940836 1.88167 3.76334 7.52669 15.0534 30.1068 60.2135 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0011 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.127 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.945 x 7.537 at -3.316 degrees (North through East) ! Clean map min=-0.0023387 max=0.12716 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J1607-3331_S_2017_07_09_pus_uvs.log closed on Wed May 8 14:52:43 2019