! Started logfile: J1607-3331_S_2017_06_15_pus_uvs.log on Tue May 7 15:23:19 2019 obs J1607-3331_S_2017_06_15_pus_uva.fits ! Reading UV FITS file: J1607-3331_S_2017_06_15_pus_uva.fits ! AN table 1: 10 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.753333 visibilities/baseline/integration-bin. ! Found source: J1607-3331 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 603 lines of history. ! ! Reading 1356 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J1607-3331_S_2017_06_15_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 23 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 23 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 13 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 73 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.951673Jy sigma=0.006525 ! Fit after self-cal, rms=0.880993Jy sigma=0.006105 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.528 mas, bmaj=6.924 mas, bpa=2.886 degrees ! Estimated noise=3885.86 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0955216 Jy ! Component: 100 - total flux cleaned = 0.117595 Jy ! Total flux subtracted in 100 components = 0.117595 Jy ! Clean residual min=-0.011786 max=0.019161 Jy/beam ! Clean residual mean=-0.000342 rms=0.003963 Jy/beam ! Combined flux in latest and established models = 0.117595 Jy ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 10 components and 0.117595 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.109461Jy sigma=0.000719 ! Fit after self-cal, rms=0.109412Jy sigma=0.000719 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.939 mas, bmaj=7.849 mas, bpa=1.979 degrees ! Estimated noise=3451.86 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0118247 Jy ! Component: 100 - total flux cleaned = 0.0168434 Jy ! Component: 150 - total flux cleaned = 0.0180594 Jy ! Component: 200 - total flux cleaned = 0.0184705 Jy ! Total flux subtracted in 200 components = 0.0184705 Jy ! Clean residual min=-0.010185 max=0.015997 Jy/beam ! Clean residual mean=-0.000277 rms=0.003381 Jy/beam ! Combined flux in latest and established models = 0.136066 Jy ! Performing phase self-cal ! Adding 22 model components to the UV plane model. ! The established model now contains 25 components and 0.136066 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.108505Jy sigma=0.000709 ! Fit after self-cal, rms=0.108521Jy sigma=0.000709 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.85 FD 0.90 HN 1.00* KP 1.04 ! LA 0.91 MK 0.99 NL 1.00* OV 0.84 ! PT 0.94 SC 1.04 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 0.94 HN 1.00* KP 1.05 ! LA 0.85 MK 1.00 NL 1.44 OV 0.98 ! PT 0.89 SC 0.87 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 1.86 FD 0.93 HN 1.00* KP 0.95 ! LA 0.94 MK 1.02 NL 1.14 OV 0.90 ! PT 0.89 SC 1.00 ! ! ! Correcting IF 4. ! A total of 27 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.00* FD 0.00* HN 0.00* KP 0.00* ! LA 0.00* MK 0.00* NL 0.00* OV 0.00* ! PT 0.00* SC 0.00* ! ! ! Fit before self-cal, rms=0.108521Jy sigma=0.000709 ! Fit after self-cal, rms=0.126962Jy sigma=0.000681 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.946 mas, bmaj=7.935 mas, bpa=3.374 degrees ! Estimated noise=3511.16 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000701689 Jy ! Component: 100 - total flux cleaned = 0.000709623 Jy ! Component: 150 - total flux cleaned = 0.000649474 Jy ! Component: 200 - total flux cleaned = 0.00059724 Jy ! Total flux subtracted in 200 components = 0.00059724 Jy ! Clean residual min=-0.007256 max=0.008949 Jy/beam ! Clean residual mean=-0.000022 rms=0.002036 Jy/beam ! Combined flux in latest and established models = 0.136663 Jy ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 34 components and 0.136663 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.126809Jy sigma=0.000681 ! Fit after self-cal, rms=0.127855Jy sigma=0.000680 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.127855Jy sigma=0.000680 ! Fit after self-cal, rms=0.129790Jy sigma=0.000680 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.929 mas, bmaj=7.903 mas, bpa=3.236 degrees ! Estimated noise=3501.17 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000316361 Jy ! Component: 100 - total flux cleaned = 0.000435996 Jy ! Component: 150 - total flux cleaned = 0.00043612 Jy ! Component: 200 - total flux cleaned = 0.000353579 Jy ! Total flux subtracted in 200 components = 0.000353579 Jy ! Clean residual min=-0.007099 max=0.008745 Jy/beam ! Clean residual mean=-0.000012 rms=0.001994 Jy/beam ! Combined flux in latest and established models = 0.137016 Jy selfcal ! Performing phase self-cal ! Adding 8 model components to the UV plane model. ! The established model now contains 36 components and 0.137016 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.129676Jy sigma=0.000679 ! Fit after self-cal, rms=0.129753Jy sigma=0.000679 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-52.5, 99). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00664884 Jy ! Component: 100 - total flux cleaned = 0.00702052 Jy ! Component: 150 - total flux cleaned = 0.00694206 Jy ! Component: 200 - total flux cleaned = 0.00686968 Jy ! Total flux subtracted in 200 components = 0.00686968 Jy ! Clean residual min=-0.006694 max=0.006679 Jy/beam ! Clean residual mean=0.000019 rms=0.001841 Jy/beam ! Combined flux in latest and established models = 0.143886 Jy ! Performing phase self-cal ! Adding 24 model components to the UV plane model. ! The established model now contains 60 components and 0.143886 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.129138Jy sigma=0.000677 ! Fit after self-cal, rms=0.128978Jy sigma=0.000676 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.128978Jy sigma=0.000676 ! Fit after self-cal, rms=0.126840Jy sigma=0.000676 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.915 mas, bmaj=7.875 mas, bpa=3.313 degrees ! Estimated noise=3458.08 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000447757 Jy ! Component: 100 - total flux cleaned = 0.000531404 Jy ! Component: 150 - total flux cleaned = 0.000467869 Jy ! Component: 200 - total flux cleaned = 0.000409179 Jy ! Total flux subtracted in 200 components = 0.000409179 Jy ! Clean residual min=-0.006454 max=0.007073 Jy/beam ! Clean residual mean=0.000038 rms=0.001777 Jy/beam ! Combined flux in latest and established models = 0.144295 Jy selfcal ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 67 components and 0.144295 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.126674Jy sigma=0.000675 ! Fit after self-cal, rms=0.126635Jy sigma=0.000675 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00014735 Jy ! Component: 100 - total flux cleaned = -0.000263479 Jy ! Component: 150 - total flux cleaned = -0.000208265 Jy ! Component: 200 - total flux cleaned = -0.000158974 Jy ! Total flux subtracted in 200 components = -0.000158974 Jy ! Clean residual min=-0.006541 max=0.007125 Jy/beam ! Clean residual mean=0.000037 rms=0.001771 Jy/beam ! Combined flux in latest and established models = 0.144136 Jy ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 72 components and 0.144136 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.126552Jy sigma=0.000675 ! Fit after self-cal, rms=0.126550Jy sigma=0.000675 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.126550Jy sigma=0.000675 ! Fit after self-cal, rms=0.125681Jy sigma=0.000675 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=9.294 mas, bmaj=27.16 mas, bpa=7.099 degrees ! Estimated noise=4495.49 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000517214 Jy ! Component: 100 - total flux cleaned = -0.000611559 Jy ! Component: 150 - total flux cleaned = -0.000739967 Jy ! Component: 200 - total flux cleaned = -0.000854591 Jy ! Total flux subtracted in 200 components = -0.000854591 Jy ! Clean residual min=-0.005351 max=0.006097 Jy/beam ! Clean residual mean=0.000090 rms=0.002126 Jy/beam ! Combined flux in latest and established models = 0.143282 Jy selfcal ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 80 components and 0.143282 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.125647Jy sigma=0.000675 ! Fit after self-cal, rms=0.125664Jy sigma=0.000675 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000172773 Jy ! Component: 100 - total flux cleaned = -0.000279077 Jy ! Component: 150 - total flux cleaned = -0.000346862 Jy ! Component: 200 - total flux cleaned = -0.000440776 Jy ! Total flux subtracted in 200 components = -0.000440776 Jy ! Clean residual min=-0.005342 max=0.006082 Jy/beam ! Clean residual mean=0.000089 rms=0.002125 Jy/beam ! Combined flux in latest and established models = 0.142841 Jy ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 84 components and 0.142841 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.125647Jy sigma=0.000675 ! Fit after self-cal, rms=0.125657Jy sigma=0.000675 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=2.903 mas, bmaj=7.851 mas, bpa=3.339 degrees ! Estimated noise=3440.5 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.903 x 7.851 at 3.339 degrees (North through East) ! Clean map min=-0.0085071 max=0.12682 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.493 mas, bmaj=6.963 mas, bpa=3.899 degrees ! Estimated noise=3914.08 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.094525 Jy ! Component: 100 - total flux cleaned = 0.117161 Jy ! Component: 150 - total flux cleaned = 0.128929 Jy ! Component: 200 - total flux cleaned = 0.133254 Jy ! Total flux subtracted in 200 components = 0.133254 Jy ! Clean residual min=-0.009048 max=0.009237 Jy/beam ! Clean residual mean=-0.000011 rms=0.002254 Jy/beam ! Combined flux in latest and established models = 0.133254 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 24 model components to the UV plane model. ! The established model now contains 24 components and 0.133254 Jy ! Inverting map and beam ! Estimated beam: bmin=2.903 mas, bmaj=7.851 mas, bpa=3.339 degrees ! Estimated noise=3440.5 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00609405 Jy ! Component: 100 - total flux cleaned = 0.00809778 Jy ! Component: 150 - total flux cleaned = 0.00899009 Jy ! Component: 200 - total flux cleaned = 0.00963342 Jy ! Total flux subtracted in 200 components = 0.00963342 Jy ! Clean residual min=-0.006865 max=0.007085 Jy/beam ! Clean residual mean=0.000040 rms=0.001852 Jy/beam ! Combined flux in latest and established models = 0.142887 Jy ! Adding 26 model components to the UV plane model. ! The established model now contains 38 components and 0.142887 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=9.294 mas, bmaj=27.16 mas, bpa=7.099 degrees ! Estimated noise=4495.49 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00235182 Jy ! Component: 100 - total flux cleaned = 0.00226558 Jy ! Component: 150 - total flux cleaned = 0.00203239 Jy ! Component: 200 - total flux cleaned = 0.00189854 Jy ! Total flux subtracted in 200 components = 0.00189854 Jy ! Clean residual min=-0.005342 max=0.006358 Jy/beam ! Clean residual mean=0.000107 rms=0.002162 Jy/beam ! Combined flux in latest and established models = 0.144786 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000176563 Jy ! Component: 100 - total flux cleaned = -0.000279804 Jy ! Component: 150 - total flux cleaned = -0.000423902 Jy ! Component: 200 - total flux cleaned = -0.000554272 Jy ! Total flux subtracted in 200 components = -0.000554272 Jy ! Clean residual min=-0.005307 max=0.006221 Jy/beam ! Clean residual mean=0.000102 rms=0.002141 Jy/beam ! Combined flux in latest and established models = 0.144231 Jy ! Adding 24 model components to the UV plane model. ! The established model now contains 59 components and 0.144231 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=2.903 mas, bmaj=7.851 mas, bpa=3.339 degrees ! Estimated noise=3440.5 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000356325 Jy ! Component: 100 - total flux cleaned = -0.000366668 Jy ! Component: 150 - total flux cleaned = -0.000370276 Jy ! Component: 200 - total flux cleaned = -0.000368229 Jy ! Total flux subtracted in 200 components = -0.000368229 Jy ! Clean residual min=-0.007001 max=0.007113 Jy/beam ! Clean residual mean=0.000047 rms=0.001783 Jy/beam ! Combined flux in latest and established models = 0.143863 Jy selfcal ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 77 components and 0.143863 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.125785Jy sigma=0.000675 ! Fit after self-cal, rms=0.125796Jy sigma=0.000675 wmodel J1607-3331_S_2017_06_15_pus_map.mod ! Writing 77 model components to file: J1607-3331_S_2017_06_15_pus_map.mod wobs J1607-3331_S_2017_06_15_pus_uvs.fits ! Writing UV FITS file: J1607-3331_S_2017_06_15_pus_uvs.fits wwins J1607-3331_S_2017_06_15_pus_map.win ! wwins: Wrote 2 windows to J1607-3331_S_2017_06_15_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 3.8693e-05 Jy ! Component: 100 - total flux cleaned = -0.000502918 Jy ! Component: 150 - total flux cleaned = -0.000203553 Jy ! Component: 200 - total flux cleaned = 8.56636e-05 Jy ! Component: 250 - total flux cleaned = 0.000357317 Jy ! Component: 300 - total flux cleaned = 0.000697659 Jy ! Component: 350 - total flux cleaned = 0.000855614 Jy ! Component: 400 - total flux cleaned = 0.00116034 Jy ! Component: 450 - total flux cleaned = 0.00115912 Jy ! Component: 500 - total flux cleaned = 0.00116004 Jy ! Component: 550 - total flux cleaned = 0.00122859 Jy ! Component: 600 - total flux cleaned = 0.00129315 Jy ! Component: 650 - total flux cleaned = 0.00135554 Jy ! Component: 700 - total flux cleaned = 0.00141776 Jy ! Component: 750 - total flux cleaned = 0.00171789 Jy ! Component: 800 - total flux cleaned = 0.00201243 Jy ! Component: 850 - total flux cleaned = 0.00246981 Jy ! Component: 900 - total flux cleaned = 0.0028045 Jy ! Component: 950 - total flux cleaned = 0.00324028 Jy ! Component: 1000 - total flux cleaned = 0.00350594 Jy ! Component: 1050 - total flux cleaned = 0.00387074 Jy ! Component: 1100 - total flux cleaned = 0.00417659 Jy ! Component: 1150 - total flux cleaned = 0.00452633 Jy ! Component: 1200 - total flux cleaned = 0.00487004 Jy ! Component: 1250 - total flux cleaned = 0.00515826 Jy ! Component: 1300 - total flux cleaned = 0.00548791 Jy ! Component: 1350 - total flux cleaned = 0.00576552 Jy ! Component: 1400 - total flux cleaned = 0.0061273 Jy ! Component: 1450 - total flux cleaned = 0.00648269 Jy ! Component: 1500 - total flux cleaned = 0.0067888 Jy ! Component: 1550 - total flux cleaned = 0.00717557 Jy ! Component: 1600 - total flux cleaned = 0.00759817 Jy ! Component: 1650 - total flux cleaned = 0.00788834 Jy ! Component: 1700 - total flux cleaned = 0.00833809 Jy ! Component: 1750 - total flux cleaned = 0.00874039 Jy ! Component: 1800 - total flux cleaned = 0.00917655 Jy ! Component: 1850 - total flux cleaned = 0.00960576 Jy ! Component: 1900 - total flux cleaned = 0.00991406 Jy ! Component: 1950 - total flux cleaned = 0.0102945 Jy ! Component: 2000 - total flux cleaned = 0.0105203 Jy ! Component: 2050 - total flux cleaned = 0.0107069 Jy ! Component: 2100 - total flux cleaned = 0.0108178 Jy ! Component: 2150 - total flux cleaned = 0.0109646 Jy ! Component: 2200 - total flux cleaned = 0.0110011 Jy ! Component: 2250 - total flux cleaned = 0.0111463 Jy ! Component: 2300 - total flux cleaned = 0.0112545 Jy ! Component: 2350 - total flux cleaned = 0.0113621 Jy ! Component: 2400 - total flux cleaned = 0.0114337 Jy ! Component: 2450 - total flux cleaned = 0.0116116 Jy ! Component: 2500 - total flux cleaned = 0.0116821 Jy ! Component: 2550 - total flux cleaned = 0.0116472 Jy ! Component: 2600 - total flux cleaned = 0.0117173 Jy ! Component: 2650 - total flux cleaned = 0.0116121 Jy ! Component: 2700 - total flux cleaned = 0.0115071 Jy ! Component: 2750 - total flux cleaned = 0.0114028 Jy ! Component: 2800 - total flux cleaned = 0.0112635 Jy ! Component: 2850 - total flux cleaned = 0.0112285 Jy ! Component: 2900 - total flux cleaned = 0.0110203 Jy ! Component: 2950 - total flux cleaned = 0.0109163 Jy ! Component: 3000 - total flux cleaned = 0.010708 Jy ! Component: 3050 - total flux cleaned = 0.0106039 Jy ! Component: 3100 - total flux cleaned = 0.0103951 Jy ! Component: 3150 - total flux cleaned = 0.0101511 Jy ! Component: 3200 - total flux cleaned = 0.00990605 Jy ! Component: 3250 - total flux cleaned = 0.00973 Jy ! Component: 3300 - total flux cleaned = 0.00951713 Jy ! Component: 3350 - total flux cleaned = 0.00937413 Jy ! Component: 3400 - total flux cleaned = 0.00919374 Jy ! Component: 3450 - total flux cleaned = 0.00897452 Jy ! Component: 3500 - total flux cleaned = 0.00882677 Jy ! Component: 3550 - total flux cleaned = 0.00867825 Jy ! Component: 3600 - total flux cleaned = 0.00841438 Jy ! Component: 3650 - total flux cleaned = 0.00822357 Jy ! Component: 3700 - total flux cleaned = 0.00814623 Jy ! Component: 3750 - total flux cleaned = 0.00798936 Jy ! Component: 3800 - total flux cleaned = 0.00783012 Jy ! Component: 3850 - total flux cleaned = 0.00766849 Jy ! Component: 3900 - total flux cleaned = 0.00754552 Jy ! Component: 3950 - total flux cleaned = 0.00737964 Jy ! Component: 4000 - total flux cleaned = 0.00712691 Jy ! Component: 4050 - total flux cleaned = 0.00699809 Jy ! Total flux subtracted in 4096 components = 0.00678102 Jy ! Clean residual min=-0.002499 max=0.002230 Jy/beam ! Clean residual mean=0.000017 rms=0.000732 Jy/beam ! Combined flux in latest and established models = 0.150644 Jy keep ! Adding 218 model components to the UV plane model. ! The established model now contains 295 components and 0.150644 Jy ![Exited script file: muppet] wmap "J1607-3331_S_2017_06_15_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.903 x 7.851 at 3.339 degrees (North through East) ! Clean map min=-0.0066991 max=0.12372 Jy/beam ! Writing clean map to FITS file: J1607-3331_S_2017_06_15_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.123717 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000746642 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -1.81053 1.81053 3.62106 7.24212 14.4842 28.9685 57.937 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0022 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.123 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.903 x 7.851 at 3.339 degrees (North through East) ! Clean map min=-0.0066991 max=0.12372 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J1607-3331_S_2017_06_15_pus_uvs.log closed on Tue May 7 15:23:24 2019