! Started logfile: J1607-3331_S_2017_06_10_pus_uvs.log on Mon May 6 14:57:32 2019 obs J1607-3331_S_2017_06_10_pus_uva.fits ! Reading UV FITS file: J1607-3331_S_2017_06_10_pus_uva.fits ! AN table 1: 26 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.588034 visibilities/baseline/integration-bin. ! Found source: J1607-3331 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 1154 lines of history. ! ! Reading 2752 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J1607-3331_S_2017_06_10_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 85 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 59 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 59 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 188 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.878869Jy sigma=0.006482 ! Fit after self-cal, rms=0.863714Jy sigma=0.006393 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.283 mas, bmaj=6.618 mas, bpa=-0.2376 degrees ! Estimated noise=2691.37 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.10525 Jy ! Component: 100 - total flux cleaned = 0.130069 Jy ! Total flux subtracted in 100 components = 0.130069 Jy ! Clean residual min=-0.009423 max=0.010686 Jy/beam ! Clean residual mean=-0.000134 rms=0.002354 Jy/beam ! Combined flux in latest and established models = 0.130069 Jy ! Performing phase self-cal ! Adding 7 model components to the UV plane model. ! The established model now contains 7 components and 0.130069 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.098275Jy sigma=0.000680 ! Fit after self-cal, rms=0.098273Jy sigma=0.000680 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.821 mas, bmaj=7.674 mas, bpa=-0.7227 degrees ! Estimated noise=2181.73 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0150299 Jy ! Component: 100 - total flux cleaned = 0.0216003 Jy ! Component: 150 - total flux cleaned = 0.0246406 Jy ! Component: 200 - total flux cleaned = 0.0258936 Jy ! Total flux subtracted in 200 components = 0.0258936 Jy ! Clean residual min=-0.006974 max=0.005936 Jy/beam ! Clean residual mean=-0.000155 rms=0.001807 Jy/beam ! Combined flux in latest and established models = 0.155962 Jy ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 14 components and 0.155962 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.096350Jy sigma=0.000664 ! Fit after self-cal, rms=0.096339Jy sigma=0.000663 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.03 HN 1.00* KP 1.08 ! LA 0.95 MK 1.01 NL 1.00* OV 1.03 ! PT 0.97 SC 0.89 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 0.99 HN 1.00* KP 1.05 ! LA 0.91 MK 0.96 NL 1.22 OV 1.06 ! PT 0.90 SC 1.02 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.10 HN 1.00* KP 1.04 ! LA 0.91 MK 1.02 NL 1.06 OV 0.92 ! PT 0.92 SC 1.08 ! ! ! Correcting IF 4. ! A total of 72 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.00* FD 0.00* HN 0.00* KP 0.00* ! LA 0.00* MK 0.00* NL 0.00* OV 0.00* ! PT 0.00* SC 0.00* ! ! ! Fit before self-cal, rms=0.096339Jy sigma=0.000663 ! Fit after self-cal, rms=0.098789Jy sigma=0.000659 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.833 mas, bmaj=7.694 mas, bpa=0.4567 degrees ! Estimated noise=2223.48 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000459391 Jy ! Component: 100 - total flux cleaned = 0.000508649 Jy ! Component: 150 - total flux cleaned = 0.000464579 Jy ! Component: 200 - total flux cleaned = 0.000463652 Jy ! Total flux subtracted in 200 components = 0.000463652 Jy ! Clean residual min=-0.005999 max=0.005477 Jy/beam ! Clean residual mean=-0.000029 rms=0.001425 Jy/beam ! Combined flux in latest and established models = 0.156426 Jy ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 21 components and 0.156426 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.098741Jy sigma=0.000659 ! Fit after self-cal, rms=0.098883Jy sigma=0.000659 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.098883Jy sigma=0.000659 ! Fit after self-cal, rms=0.099196Jy sigma=0.000658 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.829 mas, bmaj=7.687 mas, bpa=0.4767 degrees ! Estimated noise=2228.19 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000526736 Jy ! Component: 100 - total flux cleaned = 0.00057321 Jy ! Component: 150 - total flux cleaned = 0.000611584 Jy ! Component: 200 - total flux cleaned = 0.000610999 Jy ! Total flux subtracted in 200 components = 0.000610999 Jy ! Clean residual min=-0.005945 max=0.005448 Jy/beam ! Clean residual mean=-0.000025 rms=0.001415 Jy/beam ! Combined flux in latest and established models = 0.157037 Jy selfcal ! Performing phase self-cal ! Adding 8 model components to the UV plane model. ! The established model now contains 24 components and 0.157037 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.099156Jy sigma=0.000658 ! Fit after self-cal, rms=0.099153Jy sigma=0.000658 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -4.62822e-05 Jy ! Component: 100 - total flux cleaned = -8.57205e-05 Jy ! Component: 150 - total flux cleaned = -8.80685e-05 Jy ! Component: 200 - total flux cleaned = -5.65909e-05 Jy ! Total flux subtracted in 200 components = -5.65909e-05 Jy ! Clean residual min=-0.005963 max=0.005451 Jy/beam ! Clean residual mean=-0.000026 rms=0.001410 Jy/beam ! Combined flux in latest and established models = 0.15698 Jy ! Performing phase self-cal ! Adding 8 model components to the UV plane model. ! The established model now contains 27 components and 0.15698 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.099123Jy sigma=0.000658 ! Fit after self-cal, rms=0.099116Jy sigma=0.000658 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.099116Jy sigma=0.000658 ! Fit after self-cal, rms=0.099152Jy sigma=0.000657 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.824 mas, bmaj=7.677 mas, bpa=0.539 degrees ! Estimated noise=2224.62 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000179778 Jy ! Component: 100 - total flux cleaned = 0.000179091 Jy ! Component: 150 - total flux cleaned = 0.00018079 Jy ! Component: 200 - total flux cleaned = 0.000182317 Jy ! Total flux subtracted in 200 components = 0.000182317 Jy ! Clean residual min=-0.005811 max=0.005425 Jy/beam ! Clean residual mean=-0.000020 rms=0.001403 Jy/beam ! Combined flux in latest and established models = 0.157162 Jy selfcal ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 28 components and 0.157162 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.099125Jy sigma=0.000657 ! Fit after self-cal, rms=0.099139Jy sigma=0.000657 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000108417 Jy ! Component: 100 - total flux cleaned = -0.000105635 Jy ! Component: 150 - total flux cleaned = -0.00010261 Jy ! Component: 200 - total flux cleaned = -7.38575e-05 Jy ! Total flux subtracted in 200 components = -7.38575e-05 Jy ! Clean residual min=-0.005800 max=0.005425 Jy/beam ! Clean residual mean=-0.000020 rms=0.001400 Jy/beam ! Combined flux in latest and established models = 0.157089 Jy ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 29 components and 0.157089 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.099118Jy sigma=0.000657 ! Fit after self-cal, rms=0.099113Jy sigma=0.000657 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.099113Jy sigma=0.000657 ! Fit after self-cal, rms=0.099063Jy sigma=0.000657 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=9.186 mas, bmaj=26.62 mas, bpa=3.218 degrees ! Estimated noise=2976.32 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000170876 Jy ! Component: 100 - total flux cleaned = 0.000169844 Jy ! Component: 150 - total flux cleaned = 0.000166813 Jy ! Component: 200 - total flux cleaned = 0.000163133 Jy ! Total flux subtracted in 200 components = 0.000163133 Jy ! Clean residual min=-0.005961 max=0.005043 Jy/beam ! Clean residual mean=-0.000042 rms=0.001714 Jy/beam ! Combined flux in latest and established models = 0.157252 Jy selfcal ! Performing phase self-cal ! Adding 6 model components to the UV plane model. ! The established model now contains 33 components and 0.157252 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.099050Jy sigma=0.000657 ! Fit after self-cal, rms=0.099046Jy sigma=0.000657 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -5.59381e-05 Jy ! Component: 100 - total flux cleaned = -6.10635e-05 Jy ! Component: 150 - total flux cleaned = -6.57823e-05 Jy ! Component: 200 - total flux cleaned = -7.0145e-05 Jy ! Total flux subtracted in 200 components = -7.0145e-05 Jy ! Clean residual min=-0.005930 max=0.005012 Jy/beam ! Clean residual mean=-0.000043 rms=0.001713 Jy/beam ! Combined flux in latest and established models = 0.157182 Jy ! Performing phase self-cal ! Adding 5 model components to the UV plane model. ! The established model now contains 33 components and 0.157182 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.099043Jy sigma=0.000657 ! Fit after self-cal, rms=0.099042Jy sigma=0.000657 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=2.821 mas, bmaj=7.67 mas, bpa=0.5808 degrees ! Estimated noise=2223.14 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.821 x 7.67 at 0.5808 degrees (North through East) ! Clean map min=-0.0056616 max=0.14118 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.284 mas, bmaj=6.606 mas, bpa=0.6388 degrees ! Estimated noise=2756.78 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.106044 Jy ! Component: 100 - total flux cleaned = 0.132041 Jy ! Component: 150 - total flux cleaned = 0.143982 Jy ! Component: 200 - total flux cleaned = 0.151066 Jy ! Total flux subtracted in 200 components = 0.151066 Jy ! Clean residual min=-0.008539 max=0.007016 Jy/beam ! Clean residual mean=-0.000028 rms=0.001878 Jy/beam ! Combined flux in latest and established models = 0.151066 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 13 model components to the UV plane model. ! The established model now contains 13 components and 0.151066 Jy ! Inverting map and beam ! Estimated beam: bmin=2.821 mas, bmaj=7.67 mas, bpa=0.5808 degrees ! Estimated noise=2223.14 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00472806 Jy ! Component: 100 - total flux cleaned = 0.00546061 Jy ! Component: 150 - total flux cleaned = 0.00570686 Jy ! Component: 200 - total flux cleaned = 0.00577755 Jy ! Total flux subtracted in 200 components = 0.00577755 Jy ! Clean residual min=-0.006048 max=0.005577 Jy/beam ! Clean residual mean=-0.000022 rms=0.001425 Jy/beam ! Combined flux in latest and established models = 0.156844 Jy ! Adding 11 model components to the UV plane model. ! The established model now contains 17 components and 0.156844 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=9.186 mas, bmaj=26.62 mas, bpa=3.218 degrees ! Estimated noise=2976.32 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000690699 Jy ! Component: 100 - total flux cleaned = 0.000683988 Jy ! Component: 150 - total flux cleaned = 0.000677294 Jy ! Component: 200 - total flux cleaned = 0.000674577 Jy ! Total flux subtracted in 200 components = 0.000674577 Jy ! Clean residual min=-0.006070 max=0.005039 Jy/beam ! Clean residual mean=-0.000039 rms=0.001712 Jy/beam ! Combined flux in latest and established models = 0.157518 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 5.88092e-07 Jy ! Component: 100 - total flux cleaned = 1.8973e-06 Jy ! Component: 150 - total flux cleaned = 3.38297e-06 Jy ! Component: 200 - total flux cleaned = 4.55317e-06 Jy ! Total flux subtracted in 200 components = 4.55317e-06 Jy ! Clean residual min=-0.005926 max=0.004998 Jy/beam ! Clean residual mean=-0.000039 rms=0.001705 Jy/beam ! Combined flux in latest and established models = 0.157523 Jy ! Adding 9 model components to the UV plane model. ! The established model now contains 23 components and 0.157523 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=2.821 mas, bmaj=7.67 mas, bpa=0.5808 degrees ! Estimated noise=2223.14 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000291553 Jy ! Component: 100 - total flux cleaned = -0.000134773 Jy ! Component: 150 - total flux cleaned = -8.87146e-05 Jy ! Component: 200 - total flux cleaned = -8.54063e-05 Jy ! Total flux subtracted in 200 components = -8.54063e-05 Jy ! Clean residual min=-0.005742 max=0.005308 Jy/beam ! Clean residual mean=-0.000019 rms=0.001408 Jy/beam ! Combined flux in latest and established models = 0.157437 Jy selfcal ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 36 components and 0.157437 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.099078Jy sigma=0.000657 ! Fit after self-cal, rms=0.099069Jy sigma=0.000657 wmodel J1607-3331_S_2017_06_10_pus_map.mod ! Writing 36 model components to file: J1607-3331_S_2017_06_10_pus_map.mod wobs J1607-3331_S_2017_06_10_pus_uvs.fits ! Writing UV FITS file: J1607-3331_S_2017_06_10_pus_uvs.fits wwins J1607-3331_S_2017_06_10_pus_map.win ! wwins: Wrote 1 windows to J1607-3331_S_2017_06_10_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.0020376 Jy ! Component: 100 - total flux cleaned = -0.0026965 Jy ! Component: 150 - total flux cleaned = -0.00269667 Jy ! Component: 200 - total flux cleaned = -0.00269981 Jy ! Component: 250 - total flux cleaned = -0.00293481 Jy ! Component: 300 - total flux cleaned = -0.00308254 Jy ! Component: 350 - total flux cleaned = -0.00336817 Jy ! Component: 400 - total flux cleaned = -0.00343578 Jy ! Component: 450 - total flux cleaned = -0.00343534 Jy ! Component: 500 - total flux cleaned = -0.00388539 Jy ! Component: 550 - total flux cleaned = -0.00413598 Jy ! Component: 600 - total flux cleaned = -0.00456278 Jy ! Component: 650 - total flux cleaned = -0.0048592 Jy ! Component: 700 - total flux cleaned = -0.00520392 Jy ! Component: 750 - total flux cleaned = -0.00548339 Jy ! Component: 800 - total flux cleaned = -0.00575743 Jy ! Component: 850 - total flux cleaned = -0.00602475 Jy ! Component: 900 - total flux cleaned = -0.00628643 Jy ! Component: 950 - total flux cleaned = -0.00664429 Jy ! Component: 1000 - total flux cleaned = -0.00679473 Jy ! Component: 1050 - total flux cleaned = -0.0070889 Jy ! Component: 1100 - total flux cleaned = -0.00732747 Jy ! Component: 1150 - total flux cleaned = -0.00751404 Jy ! Component: 1200 - total flux cleaned = -0.00765208 Jy ! Component: 1250 - total flux cleaned = -0.00778753 Jy ! Component: 1300 - total flux cleaned = -0.00800813 Jy ! Component: 1350 - total flux cleaned = -0.00818112 Jy ! Component: 1400 - total flux cleaned = -0.00843624 Jy ! Component: 1450 - total flux cleaned = -0.0086855 Jy ! Component: 1500 - total flux cleaned = -0.00868465 Jy ! Component: 1550 - total flux cleaned = -0.00884548 Jy ! Component: 1600 - total flux cleaned = -0.00900356 Jy ! Component: 1650 - total flux cleaned = -0.00896435 Jy ! Component: 1700 - total flux cleaned = -0.00900241 Jy ! Component: 1750 - total flux cleaned = -0.00911537 Jy ! Component: 1800 - total flux cleaned = -0.00915337 Jy ! Component: 1850 - total flux cleaned = -0.00922668 Jy ! Component: 1900 - total flux cleaned = -0.00933568 Jy ! Component: 1950 - total flux cleaned = -0.00954797 Jy ! Component: 2000 - total flux cleaned = -0.00961727 Jy ! Component: 2050 - total flux cleaned = -0.00975442 Jy ! Component: 2100 - total flux cleaned = -0.00978778 Jy ! Component: 2150 - total flux cleaned = -0.0099544 Jy ! Component: 2200 - total flux cleaned = -0.010119 Jy ! Component: 2250 - total flux cleaned = -0.0103454 Jy ! Component: 2300 - total flux cleaned = -0.0104089 Jy ! Component: 2350 - total flux cleaned = -0.0105348 Jy ! Component: 2400 - total flux cleaned = -0.0107525 Jy ! Component: 2450 - total flux cleaned = -0.0109367 Jy ! Component: 2500 - total flux cleaned = -0.011118 Jy ! Component: 2550 - total flux cleaned = -0.0113564 Jy ! Component: 2600 - total flux cleaned = -0.0115618 Jy ! Component: 2650 - total flux cleaned = -0.0116775 Jy ! Component: 2700 - total flux cleaned = -0.0119067 Jy ! Component: 2750 - total flux cleaned = -0.0120485 Jy ! Component: 2800 - total flux cleaned = -0.01216 Jy ! Component: 2850 - total flux cleaned = -0.0123256 Jy ! Component: 2900 - total flux cleaned = -0.0124893 Jy ! Component: 2950 - total flux cleaned = -0.012624 Jy ! Component: 3000 - total flux cleaned = -0.0127305 Jy ! Component: 3050 - total flux cleaned = -0.012862 Jy ! Component: 3100 - total flux cleaned = -0.0129399 Jy ! Component: 3150 - total flux cleaned = -0.0130684 Jy ! Component: 3200 - total flux cleaned = -0.0133226 Jy ! Component: 3250 - total flux cleaned = -0.0133476 Jy ! Component: 3300 - total flux cleaned = -0.0134472 Jy ! Component: 3350 - total flux cleaned = -0.0135704 Jy ! Component: 3400 - total flux cleaned = -0.0135457 Jy ! Component: 3450 - total flux cleaned = -0.0137391 Jy ! Component: 3500 - total flux cleaned = -0.0138111 Jy ! Component: 3550 - total flux cleaned = -0.0139061 Jy ! Component: 3600 - total flux cleaned = -0.0139766 Jy ! Component: 3650 - total flux cleaned = -0.0140926 Jy ! Component: 3700 - total flux cleaned = -0.0141155 Jy ! Component: 3750 - total flux cleaned = -0.014207 Jy ! Component: 3800 - total flux cleaned = -0.0142748 Jy ! Component: 3850 - total flux cleaned = -0.0143197 Jy ! Component: 3900 - total flux cleaned = -0.0143865 Jy ! Component: 3950 - total flux cleaned = -0.0144965 Jy ! Component: 4000 - total flux cleaned = -0.0145405 Jy ! Component: 4050 - total flux cleaned = -0.0146921 Jy ! Total flux subtracted in 4096 components = -0.0147354 Jy ! Clean residual min=-0.001384 max=0.001626 Jy/beam ! Clean residual mean=-0.000009 rms=0.000385 Jy/beam ! Combined flux in latest and established models = 0.142702 Jy keep ! Adding 259 model components to the UV plane model. ! The established model now contains 295 components and 0.142702 Jy ![Exited script file: muppet] wmap "J1607-3331_S_2017_06_10_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.821 x 7.67 at 0.5808 degrees (North through East) ! Clean map min=-0.0030327 max=0.13763 Jy/beam ! Writing clean map to FITS file: J1607-3331_S_2017_06_10_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.137633 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000379528 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.827264 0.827264 1.65453 3.30906 6.61811 13.2362 26.4724 52.9449 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0011 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.137 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.821 x 7.67 at 0.5808 degrees (North through East) ! Clean map min=-0.0030327 max=0.13763 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J1607-3331_S_2017_06_10_pus_uvs.log closed on Mon May 6 14:57:36 2019