! Started logfile: J1607-3331_S_2017_05_31_pus_uvs.log on Tue Feb 5 21:52:21 2019 obs J1607-3331_S_2017_05_31_pus_uva.fits ! Reading UV FITS file: J1607-3331_S_2017_05_31_pus_uva.fits ! AN table 1: 40 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.698333 visibilities/baseline/integration-bin. ! Found source: J1607-3331 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 703 lines of history. ! ! Reading 5028 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J1607-3331_S_2017_05_31_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 75 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 104 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 75 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 193 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.909239Jy sigma=0.005690 ! Fit after self-cal, rms=0.872561Jy sigma=0.005535 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.502 mas, bmaj=7.931 mas, bpa=-6.274 degrees ! Estimated noise=2514.61 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.098592 Jy ! Component: 100 - total flux cleaned = 0.122107 Jy ! Total flux subtracted in 100 components = 0.122107 Jy ! Clean residual min=-0.007841 max=0.012869 Jy/beam ! Clean residual mean=0.000011 rms=0.002219 Jy/beam ! Combined flux in latest and established models = 0.122107 Jy ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 9 components and 0.122107 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.170898Jy sigma=0.000695 ! Fit after self-cal, rms=0.170780Jy sigma=0.000695 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.094 mas, bmaj=9.21 mas, bpa=-5.644 degrees ! Estimated noise=1839.86 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0181906 Jy ! Component: 100 - total flux cleaned = 0.0272263 Jy ! Component: 150 - total flux cleaned = 0.0319706 Jy ! Component: 200 - total flux cleaned = 0.034462 Jy ! Total flux subtracted in 200 components = 0.034462 Jy ! Clean residual min=-0.005724 max=0.007348 Jy/beam ! Clean residual mean=-0.000029 rms=0.001558 Jy/beam ! Combined flux in latest and established models = 0.156569 Jy ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 25 components and 0.15657 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.167748Jy sigma=0.000679 ! Fit after self-cal, rms=0.167721Jy sigma=0.000678 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.21 FD 0.94 HN 1.49 KP 1.04 ! LA 1.01 MK 1.03 NL 1.11 OV 1.01 ! PT 0.95 SC 0.98 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 0.95 HN 1.52 KP 0.99 ! LA 0.95 MK 1.00 NL 1.23 OV 1.03 ! PT 0.96 SC 1.01 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 0.57 FD 0.96 HN 1.38 KP 1.03 ! LA 0.98 MK 1.03 NL 1.06 OV 0.95 ! PT 1.04 SC 0.91 ! ! ! Correcting IF 4. ! A total of 9 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.04 HN 1.35 KP 0.73 ! LA 0.88 MK 1.01 NL 1.00* OV 1.00* ! PT 1.02 SC 1.00* ! ! ! Fit before self-cal, rms=0.167721Jy sigma=0.000678 ! Fit after self-cal, rms=0.156215Jy sigma=0.000668 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.125 mas, bmaj=9.135 mas, bpa=-5.084 degrees ! Estimated noise=1863.13 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0010742 Jy ! Component: 100 - total flux cleaned = 0.00113187 Jy ! Component: 150 - total flux cleaned = 0.001132 Jy ! Component: 200 - total flux cleaned = 0.00117514 Jy ! Total flux subtracted in 200 components = 0.00117514 Jy ! Clean residual min=-0.005294 max=0.004802 Jy/beam ! Clean residual mean=-0.000033 rms=0.001265 Jy/beam ! Combined flux in latest and established models = 0.157745 Jy ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 34 components and 0.157745 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.156123Jy sigma=0.000668 ! Fit after self-cal, rms=0.156309Jy sigma=0.000668 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.156309Jy sigma=0.000668 ! Fit after self-cal, rms=0.166084Jy sigma=0.000663 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.122 mas, bmaj=9.127 mas, bpa=-4.916 degrees ! Estimated noise=1889.88 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00195824 Jy ! Component: 100 - total flux cleaned = 0.00234857 Jy ! Component: 150 - total flux cleaned = 0.0023775 Jy ! Component: 200 - total flux cleaned = 0.0023784 Jy ! Total flux subtracted in 200 components = 0.0023784 Jy ! Clean residual min=-0.004957 max=0.004427 Jy/beam ! Clean residual mean=-0.000024 rms=0.001156 Jy/beam ! Combined flux in latest and established models = 0.160123 Jy selfcal ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 46 components and 0.160123 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.166029Jy sigma=0.000663 ! Fit after self-cal, rms=0.166151Jy sigma=0.000663 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -1.71918e-05 Jy ! Component: 100 - total flux cleaned = -4.14263e-05 Jy ! Component: 150 - total flux cleaned = -4.19692e-05 Jy ! Component: 200 - total flux cleaned = -6.35429e-05 Jy ! Total flux subtracted in 200 components = -6.35429e-05 Jy ! Clean residual min=-0.004915 max=0.004443 Jy/beam ! Clean residual mean=-0.000026 rms=0.001155 Jy/beam ! Combined flux in latest and established models = 0.160059 Jy ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 49 components and 0.160059 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.166144Jy sigma=0.000663 ! Fit after self-cal, rms=0.166145Jy sigma=0.000663 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.166145Jy sigma=0.000663 ! Fit after self-cal, rms=0.177619Jy sigma=0.000656 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.12 mas, bmaj=9.111 mas, bpa=-4.915 degrees ! Estimated noise=1889.76 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 5.87052e-05 Jy ! Component: 100 - total flux cleaned = 9.91897e-06 Jy ! Component: 150 - total flux cleaned = 9.0929e-06 Jy ! Component: 200 - total flux cleaned = -1.11387e-05 Jy ! Total flux subtracted in 200 components = -1.11387e-05 Jy ! Clean residual min=-0.004751 max=0.004351 Jy/beam ! Clean residual mean=0.000019 rms=0.001091 Jy/beam ! Combined flux in latest and established models = 0.160048 Jy selfcal ! Performing phase self-cal ! Adding 7 model components to the UV plane model. ! The established model now contains 50 components and 0.160048 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.177616Jy sigma=0.000656 ! Fit after self-cal, rms=0.177808Jy sigma=0.000656 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -7.05674e-05 Jy ! Component: 100 - total flux cleaned = -9.12251e-05 Jy ! Component: 150 - total flux cleaned = -0.000110335 Jy ! Component: 200 - total flux cleaned = -0.000110283 Jy ! Total flux subtracted in 200 components = -0.000110283 Jy ! Clean residual min=-0.004664 max=0.004280 Jy/beam ! Clean residual mean=0.000016 rms=0.001083 Jy/beam ! Combined flux in latest and established models = 0.159938 Jy ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 52 components and 0.159938 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.177807Jy sigma=0.000656 ! Fit after self-cal, rms=0.177811Jy sigma=0.000656 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.177811Jy sigma=0.000656 ! Fit after self-cal, rms=0.179472Jy sigma=0.000656 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.881 mas, bmaj=25.3 mas, bpa=3.249 degrees ! Estimated noise=2340.12 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 2.22914e-05 Jy ! Component: 100 - total flux cleaned = 2.32412e-05 Jy ! Component: 150 - total flux cleaned = 4.01016e-05 Jy ! Component: 200 - total flux cleaned = 5.31598e-05 Jy ! Total flux subtracted in 200 components = 5.31598e-05 Jy ! Clean residual min=-0.003813 max=0.004681 Jy/beam ! Clean residual mean=0.000036 rms=0.001214 Jy/beam ! Combined flux in latest and established models = 0.159991 Jy selfcal ! Performing phase self-cal ! Adding 7 model components to the UV plane model. ! The established model now contains 57 components and 0.159991 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.179477Jy sigma=0.000656 ! Fit after self-cal, rms=0.179505Jy sigma=0.000656 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -1.95909e-06 Jy ! Component: 100 - total flux cleaned = 1.36151e-05 Jy ! Component: 150 - total flux cleaned = 2.63965e-05 Jy ! Component: 200 - total flux cleaned = 2.67044e-05 Jy ! Total flux subtracted in 200 components = 2.67044e-05 Jy ! Clean residual min=-0.003799 max=0.004678 Jy/beam ! Clean residual mean=0.000036 rms=0.001213 Jy/beam ! Combined flux in latest and established models = 0.160018 Jy ! Performing phase self-cal ! Adding 8 model components to the UV plane model. ! The established model now contains 59 components and 0.160018 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.179510Jy sigma=0.000656 ! Fit after self-cal, rms=0.179509Jy sigma=0.000656 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.121 mas, bmaj=9.112 mas, bpa=-4.881 degrees ! Estimated noise=1887.44 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.121 x 9.112 at -4.881 degrees (North through East) ! Clean map min=-0.0044684 max=0.13159 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.515 mas, bmaj=7.723 mas, bpa=-5.469 degrees ! Estimated noise=2647 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.103309 Jy ! Component: 100 - total flux cleaned = 0.128167 Jy ! Component: 150 - total flux cleaned = 0.139882 Jy ! Component: 200 - total flux cleaned = 0.147003 Jy ! Total flux subtracted in 200 components = 0.147003 Jy ! Clean residual min=-0.005888 max=0.006970 Jy/beam ! Clean residual mean=0.000008 rms=0.001596 Jy/beam ! Combined flux in latest and established models = 0.147003 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 41 model components to the UV plane model. ! The established model now contains 41 components and 0.147003 Jy ! Inverting map and beam ! Estimated beam: bmin=3.121 mas, bmaj=9.112 mas, bpa=-4.881 degrees ! Estimated noise=1887.44 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00645964 Jy ! Component: 100 - total flux cleaned = 0.00935387 Jy ! Component: 150 - total flux cleaned = 0.0107818 Jy ! Component: 200 - total flux cleaned = 0.0110955 Jy ! Total flux subtracted in 200 components = 0.0110955 Jy ! Clean residual min=-0.004680 max=0.004191 Jy/beam ! Clean residual mean=0.000016 rms=0.001088 Jy/beam ! Combined flux in latest and established models = 0.158098 Jy ! Adding 19 model components to the UV plane model. ! The established model now contains 55 components and 0.158098 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.881 mas, bmaj=25.3 mas, bpa=3.249 degrees ! Estimated noise=2340.12 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00113303 Jy ! Component: 100 - total flux cleaned = 0.001194 Jy ! Component: 150 - total flux cleaned = 0.00121001 Jy ! Component: 200 - total flux cleaned = 0.0012254 Jy ! Total flux subtracted in 200 components = 0.0012254 Jy ! Clean residual min=-0.003787 max=0.004704 Jy/beam ! Clean residual mean=0.000033 rms=0.001219 Jy/beam ! Combined flux in latest and established models = 0.159323 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 1.46443e-05 Jy ! Component: 100 - total flux cleaned = 2.8255e-05 Jy ! Component: 150 - total flux cleaned = 4.12561e-05 Jy ! Component: 200 - total flux cleaned = 5.35825e-05 Jy ! Total flux subtracted in 200 components = 5.35825e-05 Jy ! Clean residual min=-0.003791 max=0.004709 Jy/beam ! Clean residual mean=0.000034 rms=0.001217 Jy/beam ! Combined flux in latest and established models = 0.159377 Jy ! Adding 15 model components to the UV plane model. ! The established model now contains 62 components and 0.159377 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.121 mas, bmaj=9.112 mas, bpa=-4.881 degrees ! Estimated noise=1887.44 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00045926 Jy ! Component: 100 - total flux cleaned = -0.000509042 Jy ! Component: 150 - total flux cleaned = -0.000552976 Jy ! Component: 200 - total flux cleaned = -0.000572636 Jy ! Total flux subtracted in 200 components = -0.000572636 Jy ! Clean residual min=-0.004679 max=0.004273 Jy/beam ! Clean residual mean=0.000017 rms=0.001082 Jy/beam ! Combined flux in latest and established models = 0.158804 Jy selfcal ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 67 components and 0.158804 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.179531Jy sigma=0.000656 ! Fit after self-cal, rms=0.179510Jy sigma=0.000656 wmodel J1607-3331_S_2017_05_31_pus_map.mod ! Writing 67 model components to file: J1607-3331_S_2017_05_31_pus_map.mod wobs J1607-3331_S_2017_05_31_pus_uvs.fits ! Writing UV FITS file: J1607-3331_S_2017_05_31_pus_uvs.fits wwins J1607-3331_S_2017_05_31_pus_map.win ! wwins: Wrote 1 windows to J1607-3331_S_2017_05_31_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 2.64324e-05 Jy ! Component: 100 - total flux cleaned = 0.000544857 Jy ! Component: 150 - total flux cleaned = 0.000965787 Jy ! Component: 200 - total flux cleaned = 0.00123701 Jy ! Component: 250 - total flux cleaned = 0.00136874 Jy ! Component: 300 - total flux cleaned = 0.0015631 Jy ! Component: 350 - total flux cleaned = 0.00181499 Jy ! Component: 400 - total flux cleaned = 0.00193778 Jy ! Component: 450 - total flux cleaned = 0.00205881 Jy ! Component: 500 - total flux cleaned = 0.00223605 Jy ! Component: 550 - total flux cleaned = 0.00229384 Jy ! Component: 600 - total flux cleaned = 0.00240779 Jy ! Component: 650 - total flux cleaned = 0.0025202 Jy ! Component: 700 - total flux cleaned = 0.00268643 Jy ! Component: 750 - total flux cleaned = 0.00279566 Jy ! Component: 800 - total flux cleaned = 0.00290283 Jy ! Component: 850 - total flux cleaned = 0.00295586 Jy ! Component: 900 - total flux cleaned = 0.00305981 Jy ! Component: 950 - total flux cleaned = 0.00316269 Jy ! Component: 1000 - total flux cleaned = 0.00316234 Jy ! Component: 1050 - total flux cleaned = 0.00331429 Jy ! Component: 1100 - total flux cleaned = 0.00336402 Jy ! Component: 1150 - total flux cleaned = 0.00341373 Jy ! Component: 1200 - total flux cleaned = 0.00346234 Jy ! Component: 1250 - total flux cleaned = 0.00341366 Jy ! Component: 1300 - total flux cleaned = 0.00331817 Jy ! Component: 1350 - total flux cleaned = 0.00331751 Jy ! Component: 1400 - total flux cleaned = 0.00299029 Jy ! Component: 1450 - total flux cleaned = 0.00299026 Jy ! Component: 1500 - total flux cleaned = 0.00276067 Jy ! Component: 1550 - total flux cleaned = 0.00276104 Jy ! Component: 1600 - total flux cleaned = 0.00262561 Jy ! Component: 1650 - total flux cleaned = 0.0026702 Jy ! Component: 1700 - total flux cleaned = 0.00249265 Jy ! Component: 1750 - total flux cleaned = 0.00240512 Jy ! Component: 1800 - total flux cleaned = 0.00231753 Jy ! Component: 1850 - total flux cleaned = 0.00231734 Jy ! Component: 1900 - total flux cleaned = 0.0023172 Jy ! Component: 1950 - total flux cleaned = 0.00227444 Jy ! Component: 2000 - total flux cleaned = 0.00227461 Jy ! Component: 2050 - total flux cleaned = 0.00223296 Jy ! Component: 2100 - total flux cleaned = 0.00252524 Jy ! Component: 2150 - total flux cleaned = 0.00231755 Jy ! Component: 2200 - total flux cleaned = 0.00231765 Jy ! Component: 2250 - total flux cleaned = 0.00231775 Jy ! Component: 2300 - total flux cleaned = 0.0021957 Jy ! Component: 2350 - total flux cleaned = 0.00227712 Jy ! Component: 2400 - total flux cleaned = 0.00223712 Jy ! Component: 2450 - total flux cleaned = 0.00223689 Jy ! Component: 2500 - total flux cleaned = 0.00207825 Jy ! Component: 2550 - total flux cleaned = 0.0021967 Jy ! Component: 2600 - total flux cleaned = 0.00215757 Jy ! Component: 2650 - total flux cleaned = 0.00211896 Jy ! Component: 2700 - total flux cleaned = 0.00223542 Jy ! Component: 2750 - total flux cleaned = 0.00215771 Jy ! Component: 2800 - total flux cleaned = 0.00219606 Jy ! Component: 2850 - total flux cleaned = 0.00211975 Jy ! Component: 2900 - total flux cleaned = 0.00215783 Jy ! Component: 2950 - total flux cleaned = 0.00234688 Jy ! Component: 3000 - total flux cleaned = 0.00227174 Jy ! Component: 3050 - total flux cleaned = 0.00230935 Jy ! Component: 3100 - total flux cleaned = 0.0023096 Jy ! Component: 3150 - total flux cleaned = 0.00238362 Jy ! Component: 3200 - total flux cleaned = 0.0024204 Jy ! Component: 3250 - total flux cleaned = 0.00260363 Jy ! Component: 3300 - total flux cleaned = 0.00256667 Jy ! Component: 3350 - total flux cleaned = 0.00253036 Jy ! Component: 3400 - total flux cleaned = 0.00260236 Jy ! Component: 3450 - total flux cleaned = 0.00260232 Jy ! Component: 3500 - total flux cleaned = 0.00274524 Jy ! Component: 3550 - total flux cleaned = 0.00270967 Jy ! Component: 3600 - total flux cleaned = 0.00281558 Jy ! Component: 3650 - total flux cleaned = 0.0028506 Jy ! Component: 3700 - total flux cleaned = 0.00288556 Jy ! Component: 3750 - total flux cleaned = 0.00288539 Jy ! Component: 3800 - total flux cleaned = 0.00281581 Jy ! Component: 3850 - total flux cleaned = 0.00291981 Jy ! Component: 3900 - total flux cleaned = 0.00288515 Jy ! Component: 3950 - total flux cleaned = 0.00295388 Jy ! Component: 4000 - total flux cleaned = 0.00298804 Jy ! Component: 4050 - total flux cleaned = 0.00302194 Jy ! Total flux subtracted in 4096 components = 0.00308969 Jy ! Clean residual min=-0.001817 max=0.002515 Jy/beam ! Clean residual mean=0.000003 rms=0.000626 Jy/beam ! Combined flux in latest and established models = 0.161894 Jy keep ! Adding 294 model components to the UV plane model. ! The established model now contains 361 components and 0.161894 Jy ![Exited script file: muppet] wmap "J1607-3331_S_2017_05_31_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.121 x 9.112 at -4.881 degrees (North through East) ! Clean map min=-0.0038907 max=0.13297 Jy/beam ! Writing clean map to FITS file: J1607-3331_S_2017_05_31_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.132965 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000620969 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -1.40105 1.40105 2.80209 5.60418 11.2084 22.4167 44.8334 89.6669 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0018 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.132 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.121 x 9.112 at -4.881 degrees (North through East) ! Clean map min=-0.0038907 max=0.13297 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J1607-3331_S_2017_05_31_pus_uvs.log closed on Tue Feb 5 21:52:26 2019