! Started logfile: J1607-3331_S_2017_05_01_pus_uvs.log on Wed May 1 18:39:54 2019 obs J1607-3331_S_2017_05_01_pus_uva.fits ! Reading UV FITS file: J1607-3331_S_2017_05_01_pus_uva.fits ! AN table 1: 13 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.447863 visibilities/baseline/integration-bin. ! *** This seems a bit low - see "help observe" on the binwid argument. ! Found source: J1607-3331 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 788 lines of history. ! ! Reading 1048 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J1607-3331_S_2017_05_01_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 41 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 41 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 41 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 130 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.873654Jy sigma=0.004601 ! Fit after self-cal, rms=0.835482Jy sigma=0.004454 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.84 mas, bmaj=28.05 mas, bpa=28.66 degrees ! Estimated noise=5432.56 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.137853 Jy ! Component: 100 - total flux cleaned = 0.169219 Jy ! Total flux subtracted in 100 components = 0.169219 Jy ! Clean residual min=-0.014528 max=0.016612 Jy/beam ! Clean residual mean=-0.000003 rms=0.004302 Jy/beam ! Combined flux in latest and established models = 0.169219 Jy ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 11 components and 0.169219 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.131383Jy sigma=0.000655 ! Fit after self-cal, rms=0.131360Jy sigma=0.000655 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.548 mas, bmaj=25.4 mas, bpa=27.86 degrees ! Estimated noise=4788.36 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0143101 Jy ! Component: 100 - total flux cleaned = 0.0225048 Jy ! Component: 150 - total flux cleaned = 0.0265721 Jy ! Component: 200 - total flux cleaned = 0.0277438 Jy ! Total flux subtracted in 200 components = 0.0277438 Jy ! Clean residual min=-0.010854 max=0.009981 Jy/beam ! Clean residual mean=0.000008 rms=0.002920 Jy/beam ! Combined flux in latest and established models = 0.196963 Jy ! Performing phase self-cal ! Adding 37 model components to the UV plane model. ! The established model now contains 47 components and 0.196963 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.129898Jy sigma=0.000645 ! Fit after self-cal, rms=0.129915Jy sigma=0.000645 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.06 FD 0.85 HN 1.00* KP 1.02 ! LA 1.02 MK 1.00* NL 0.94 OV 1.04 ! PT 1.00* SC 0.94 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.01 FD 0.88 HN 1.00* KP 0.98 ! LA 1.02 MK 1.00* NL 1.06 OV 1.13 ! PT 1.00* SC 1.01 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 0.92 FD 1.03 HN 1.00* KP 1.00 ! LA 1.00 MK 1.00* NL 1.25 OV 0.87 ! PT 1.00* SC 1.10 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 0.00* FD 0.00* HN 0.00* KP 0.00* ! LA 0.00* MK 0.00* NL 0.00* OV 0.00* ! PT 0.00* SC 0.00* ! ! ! Fit before self-cal, rms=0.129915Jy sigma=0.000645 ! Fit after self-cal, rms=0.132738Jy sigma=0.000636 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.573 mas, bmaj=26.06 mas, bpa=27.89 degrees ! Estimated noise=4771.11 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00248275 Jy ! Component: 100 - total flux cleaned = -0.00254807 Jy ! Component: 150 - total flux cleaned = -0.00279844 Jy ! Component: 200 - total flux cleaned = -0.00316487 Jy ! Total flux subtracted in 200 components = -0.00316487 Jy ! Clean residual min=-0.009116 max=0.008038 Jy/beam ! Clean residual mean=-0.000002 rms=0.002258 Jy/beam ! Combined flux in latest and established models = 0.193798 Jy ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 65 components and 0.193798 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.132590Jy sigma=0.000635 ! Fit after self-cal, rms=0.132843Jy sigma=0.000635 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.132843Jy sigma=0.000635 ! Fit after self-cal, rms=0.133882Jy sigma=0.000634 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.567 mas, bmaj=26.27 mas, bpa=27.91 degrees ! Estimated noise=4769.6 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00123003 Jy ! Component: 100 - total flux cleaned = -0.00159688 Jy ! Component: 150 - total flux cleaned = -0.00219412 Jy ! Component: 200 - total flux cleaned = -0.00272295 Jy ! Total flux subtracted in 200 components = -0.00272295 Jy ! Clean residual min=-0.008629 max=0.007720 Jy/beam ! Clean residual mean=-0.000001 rms=0.002127 Jy/beam ! Combined flux in latest and established models = 0.191075 Jy selfcal ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 76 components and 0.191075 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.133804Jy sigma=0.000634 ! Fit after self-cal, rms=0.133826Jy sigma=0.000634 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00100235 Jy ! Component: 100 - total flux cleaned = -0.0014226 Jy ! Component: 150 - total flux cleaned = -0.00156589 Jy ! Component: 200 - total flux cleaned = -0.00174236 Jy ! Total flux subtracted in 200 components = -0.00174236 Jy ! Clean residual min=-0.008417 max=0.007463 Jy/beam ! Clean residual mean=-0.000001 rms=0.002092 Jy/beam ! Combined flux in latest and established models = 0.189333 Jy ! Performing phase self-cal ! Adding 23 model components to the UV plane model. ! The established model now contains 90 components and 0.189333 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.133792Jy sigma=0.000634 ! Fit after self-cal, rms=0.133785Jy sigma=0.000634 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.133785Jy sigma=0.000634 ! Fit after self-cal, rms=0.134346Jy sigma=0.000633 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.557 mas, bmaj=26.5 mas, bpa=27.94 degrees ! Estimated noise=4753.3 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00122062 Jy ! Component: 100 - total flux cleaned = -0.00156963 Jy ! Component: 150 - total flux cleaned = -0.00203475 Jy ! Component: 200 - total flux cleaned = -0.00227273 Jy ! Total flux subtracted in 200 components = -0.00227273 Jy ! Clean residual min=-0.007900 max=0.007212 Jy/beam ! Clean residual mean=-0.000001 rms=0.001971 Jy/beam ! Combined flux in latest and established models = 0.18706 Jy selfcal ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 99 components and 0.18706 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.134300Jy sigma=0.000633 ! Fit after self-cal, rms=0.134311Jy sigma=0.000633 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000312426 Jy ! Component: 100 - total flux cleaned = -0.000442888 Jy ! Component: 150 - total flux cleaned = -0.00052645 Jy ! Component: 200 - total flux cleaned = -0.000681924 Jy ! Total flux subtracted in 200 components = -0.000681924 Jy ! Clean residual min=-0.007759 max=0.007049 Jy/beam ! Clean residual mean=-0.000000 rms=0.001951 Jy/beam ! Combined flux in latest and established models = 0.186378 Jy ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 103 components and 0.186378 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.134289Jy sigma=0.000633 ! Fit after self-cal, rms=0.134286Jy sigma=0.000633 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.134286Jy sigma=0.000633 ! Fit after self-cal, rms=0.134682Jy sigma=0.000633 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.394 mas, bmaj=34.2 mas, bpa=17.46 degrees ! Estimated noise=5434.82 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00106609 Jy ! Component: 100 - total flux cleaned = -0.00122015 Jy ! Component: 150 - total flux cleaned = -0.000965028 Jy ! Component: 200 - total flux cleaned = -0.000837479 Jy ! Total flux subtracted in 200 components = -0.000837479 Jy ! Clean residual min=-0.006235 max=0.006242 Jy/beam ! Clean residual mean=-0.000001 rms=0.001897 Jy/beam ! Combined flux in latest and established models = 0.185541 Jy selfcal ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 116 components and 0.185541 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.134665Jy sigma=0.000633 ! Fit after self-cal, rms=0.134672Jy sigma=0.000632 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000245095 Jy ! Component: 100 - total flux cleaned = 0.000356723 Jy ! Component: 150 - total flux cleaned = 0.000436105 Jy ! Component: 200 - total flux cleaned = 0.00050507 Jy ! Total flux subtracted in 200 components = 0.00050507 Jy ! Clean residual min=-0.006100 max=0.006081 Jy/beam ! Clean residual mean=-0.000000 rms=0.001879 Jy/beam ! Combined flux in latest and established models = 0.186046 Jy ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 122 components and 0.186046 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.134668Jy sigma=0.000632 ! Fit after self-cal, rms=0.134665Jy sigma=0.000632 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.547 mas, bmaj=26.72 mas, bpa=27.97 degrees ! Estimated noise=4733.87 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.547 x 26.72 at 27.97 degrees (North through East) ! Clean map min=-0.0071764 max=0.17067 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.846 mas, bmaj=29.46 mas, bpa=28.72 degrees ! Estimated noise=5313.51 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.134626 Jy ! Component: 100 - total flux cleaned = 0.164767 Jy ! Component: 150 - total flux cleaned = 0.173542 Jy ! Component: 200 - total flux cleaned = 0.17451 Jy ! Total flux subtracted in 200 components = 0.17451 Jy ! Clean residual min=-0.010738 max=0.010715 Jy/beam ! Clean residual mean=-0.000010 rms=0.003005 Jy/beam ! Combined flux in latest and established models = 0.174511 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 20 model components to the UV plane model. ! The established model now contains 20 components and 0.174511 Jy ! Inverting map and beam ! Estimated beam: bmin=3.547 mas, bmaj=26.72 mas, bpa=27.97 degrees ! Estimated noise=4733.87 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00364279 Jy ! Component: 100 - total flux cleaned = 0.00498216 Jy ! Component: 150 - total flux cleaned = 0.00482487 Jy ! Component: 200 - total flux cleaned = 0.00494122 Jy ! Total flux subtracted in 200 components = 0.00494122 Jy ! Clean residual min=-0.007424 max=0.007174 Jy/beam ! Clean residual mean=-0.000004 rms=0.002076 Jy/beam ! Combined flux in latest and established models = 0.179452 Jy ! Adding 30 model components to the UV plane model. ! The established model now contains 45 components and 0.179452 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.394 mas, bmaj=34.2 mas, bpa=17.46 degrees ! Estimated noise=5434.82 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.001738 Jy ! Component: 100 - total flux cleaned = 0.003017 Jy ! Component: 150 - total flux cleaned = 0.00391952 Jy ! Component: 200 - total flux cleaned = 0.0044001 Jy ! Total flux subtracted in 200 components = 0.0044001 Jy ! Clean residual min=-0.006262 max=0.006102 Jy/beam ! Clean residual mean=-0.000002 rms=0.001989 Jy/beam ! Combined flux in latest and established models = 0.183852 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000417026 Jy ! Component: 100 - total flux cleaned = 0.000624017 Jy ! Component: 150 - total flux cleaned = 0.000662646 Jy ! Component: 200 - total flux cleaned = 0.000829091 Jy ! Total flux subtracted in 200 components = 0.000829091 Jy ! Clean residual min=-0.006199 max=0.006043 Jy/beam ! Clean residual mean=-0.000001 rms=0.001949 Jy/beam ! Combined flux in latest and established models = 0.184681 Jy ! Adding 47 model components to the UV plane model. ! The established model now contains 89 components and 0.184681 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.547 mas, bmaj=26.72 mas, bpa=27.97 degrees ! Estimated noise=4733.87 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000643307 Jy ! Component: 100 - total flux cleaned = -0.000977294 Jy ! Component: 150 - total flux cleaned = -0.000636663 Jy ! Component: 200 - total flux cleaned = -0.000431819 Jy ! Total flux subtracted in 200 components = -0.000431819 Jy ! Clean residual min=-0.007563 max=0.006670 Jy/beam ! Clean residual mean=-0.000000 rms=0.001918 Jy/beam ! Combined flux in latest and established models = 0.184249 Jy selfcal ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 106 components and 0.184249 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.134740Jy sigma=0.000633 ! Fit after self-cal, rms=0.134713Jy sigma=0.000633 wmodel J1607-3331_S_2017_05_01_pus_map.mod ! Writing 106 model components to file: J1607-3331_S_2017_05_01_pus_map.mod wobs J1607-3331_S_2017_05_01_pus_uvs.fits ! Writing UV FITS file: J1607-3331_S_2017_05_01_pus_uvs.fits wwins J1607-3331_S_2017_05_01_pus_map.win ! wwins: Wrote 1 windows to J1607-3331_S_2017_05_01_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.00200142 Jy ! Component: 100 - total flux cleaned = -0.00234846 Jy ! Component: 150 - total flux cleaned = -0.00256469 Jy ! Component: 200 - total flux cleaned = -0.00246318 Jy ! Component: 250 - total flux cleaned = -0.00255453 Jy ! Component: 300 - total flux cleaned = -0.00291186 Jy ! Component: 350 - total flux cleaned = -0.00308397 Jy ! Component: 400 - total flux cleaned = -0.00324635 Jy ! Component: 450 - total flux cleaned = -0.00316644 Jy ! Component: 500 - total flux cleaned = -0.00294182 Jy ! Component: 550 - total flux cleaned = -0.00279475 Jy ! Component: 600 - total flux cleaned = -0.00265141 Jy ! Component: 650 - total flux cleaned = -0.00258223 Jy ! Component: 700 - total flux cleaned = -0.00264969 Jy ! Component: 750 - total flux cleaned = -0.00264933 Jy ! Component: 800 - total flux cleaned = -0.00271106 Jy ! Component: 850 - total flux cleaned = -0.00271048 Jy ! Component: 900 - total flux cleaned = -0.00276861 Jy ! Component: 950 - total flux cleaned = -0.00270964 Jy ! Component: 1000 - total flux cleaned = -0.00259587 Jy ! Component: 1050 - total flux cleaned = -0.00248519 Jy ! Component: 1100 - total flux cleaned = -0.00248491 Jy ! Component: 1150 - total flux cleaned = -0.002379 Jy ! Component: 1200 - total flux cleaned = -0.0022247 Jy ! Component: 1250 - total flux cleaned = -0.00212509 Jy ! Component: 1300 - total flux cleaned = -0.00217437 Jy ! Component: 1350 - total flux cleaned = -0.00212563 Jy ! Component: 1400 - total flux cleaned = -0.00203149 Jy ! Component: 1450 - total flux cleaned = -0.0020784 Jy ! Component: 1500 - total flux cleaned = -0.0020331 Jy ! Component: 1550 - total flux cleaned = -0.00198963 Jy ! Component: 1600 - total flux cleaned = -0.00207696 Jy ! Component: 1650 - total flux cleaned = -0.00203385 Jy ! Component: 1700 - total flux cleaned = -0.00199172 Jy ! Component: 1750 - total flux cleaned = -0.00211451 Jy ! Component: 1800 - total flux cleaned = -0.00215385 Jy ! Component: 1850 - total flux cleaned = -0.00219289 Jy ! Component: 1900 - total flux cleaned = -0.00219281 Jy ! Component: 1950 - total flux cleaned = -0.00223201 Jy ! Component: 2000 - total flux cleaned = -0.00230726 Jy ! Component: 2050 - total flux cleaned = -0.00234418 Jy ! Component: 2100 - total flux cleaned = -0.00230715 Jy ! Component: 2150 - total flux cleaned = -0.00227039 Jy ! Component: 2200 - total flux cleaned = -0.00223404 Jy ! Component: 2250 - total flux cleaned = -0.0022696 Jy ! Component: 2300 - total flux cleaned = -0.00237672 Jy ! Component: 2350 - total flux cleaned = -0.00248312 Jy ! Component: 2400 - total flux cleaned = -0.00255356 Jy ! Component: 2450 - total flux cleaned = -0.00255369 Jy ! Component: 2500 - total flux cleaned = -0.0026581 Jy ! Component: 2550 - total flux cleaned = -0.00276227 Jy ! Component: 2600 - total flux cleaned = -0.00290046 Jy ! Component: 2650 - total flux cleaned = -0.0030035 Jy ! Component: 2700 - total flux cleaned = -0.00320873 Jy ! Component: 2750 - total flux cleaned = -0.00337976 Jy ! Component: 2800 - total flux cleaned = -0.00351616 Jy ! Component: 2850 - total flux cleaned = -0.0035843 Jy ! Component: 2900 - total flux cleaned = -0.00368648 Jy ! Component: 2950 - total flux cleaned = -0.00368639 Jy ! Component: 3000 - total flux cleaned = -0.00375502 Jy ! Component: 3050 - total flux cleaned = -0.00382373 Jy ! Component: 3100 - total flux cleaned = -0.00392753 Jy ! Component: 3150 - total flux cleaned = -0.00396258 Jy ! Component: 3200 - total flux cleaned = -0.0040669 Jy ! Component: 3250 - total flux cleaned = -0.00410225 Jy ! Component: 3300 - total flux cleaned = -0.00417238 Jy ! Component: 3350 - total flux cleaned = -0.00424308 Jy ! Component: 3400 - total flux cleaned = -0.00431424 Jy ! Component: 3450 - total flux cleaned = -0.00438573 Jy ! Component: 3500 - total flux cleaned = -0.00442163 Jy ! Component: 3550 - total flux cleaned = -0.00445746 Jy ! Component: 3600 - total flux cleaned = -0.00456654 Jy ! Component: 3650 - total flux cleaned = -0.00456657 Jy ! Component: 3700 - total flux cleaned = -0.00456655 Jy ! Component: 3750 - total flux cleaned = -0.00460318 Jy ! Component: 3800 - total flux cleaned = -0.00464058 Jy ! Component: 3850 - total flux cleaned = -0.00467866 Jy ! Component: 3900 - total flux cleaned = -0.00467858 Jy ! Component: 3950 - total flux cleaned = -0.00471673 Jy ! Component: 4000 - total flux cleaned = -0.00471667 Jy ! Component: 4050 - total flux cleaned = -0.00471684 Jy ! Total flux subtracted in 4096 components = -0.00475618 Jy ! Clean residual min=-0.002832 max=0.002255 Jy/beam ! Clean residual mean=0.000001 rms=0.000709 Jy/beam ! Combined flux in latest and established models = 0.179493 Jy keep ! Adding 206 model components to the UV plane model. ! The established model now contains 312 components and 0.179493 Jy ![Exited script file: muppet] wmap "J1607-3331_S_2017_05_01_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.547 x 26.72 at 27.97 degrees (North through East) ! Clean map min=-0.0069083 max=0.16583 Jy/beam ! Writing clean map to FITS file: J1607-3331_S_2017_05_01_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.165826 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000690599 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -1.24938 1.24938 2.49877 4.99753 9.99506 19.9901 39.9803 79.9605 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.002 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.165 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.547 x 26.72 at 27.97 degrees (North through East) ! Clean map min=-0.0069083 max=0.16583 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J1607-3331_S_2017_05_01_pus_uvs.log closed on Wed May 1 18:39:59 2019