! Started logfile: J1607-3331_S_2017_03_27_pus_uvs.log on Sun Apr 28 14:44:38 2019 obs J1607-3331_S_2017_03_27_pus_uva.fits ! Reading UV FITS file: J1607-3331_S_2017_03_27_pus_uva.fits ! AN table 1: 16 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.556944 visibilities/baseline/integration-bin. ! Found source: J1607-3331 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 1684 lines of history. ! ! Reading 1604 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J1607-3331_S_2017_03_27_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 51 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 51 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 41 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 65 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.946620Jy sigma=0.006202 ! Fit after self-cal, rms=0.875798Jy sigma=0.005787 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.574 mas, bmaj=7.746 mas, bpa=-0.7945 degrees ! Estimated noise=3832.58 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0977674 Jy ! Component: 100 - total flux cleaned = 0.12076 Jy ! Total flux subtracted in 100 components = 0.12076 Jy ! Clean residual min=-0.010932 max=0.009962 Jy/beam ! Clean residual mean=-0.000053 rms=0.002784 Jy/beam ! Combined flux in latest and established models = 0.12076 Jy ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 9 components and 0.12076 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.114948Jy sigma=0.000658 ! Fit after self-cal, rms=0.114868Jy sigma=0.000658 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.215 mas, bmaj=9.466 mas, bpa=-1.076 degrees ! Estimated noise=2971.43 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.013376 Jy ! Component: 100 - total flux cleaned = 0.019155 Jy ! Component: 150 - total flux cleaned = 0.0220596 Jy ! Component: 200 - total flux cleaned = 0.0230739 Jy ! Total flux subtracted in 200 components = 0.0230739 Jy ! Clean residual min=-0.007597 max=0.007331 Jy/beam ! Clean residual mean=-0.000065 rms=0.002069 Jy/beam ! Combined flux in latest and established models = 0.143834 Jy ! Performing phase self-cal ! Adding 34 model components to the UV plane model. ! The established model now contains 39 components and 0.143834 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.113461Jy sigma=0.000647 ! Fit after self-cal, rms=0.113405Jy sigma=0.000647 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.44 FD 1.14 HN 1.00* KP 1.04 ! LA 0.91 MK 0.92 NL 1.00* OV 0.95 ! PT 0.97 SC 0.93 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.04 FD 1.03 HN 1.00* KP 1.04 ! LA 0.86 MK 1.07 NL 1.00* OV 1.01 ! PT 0.97 SC 1.02 ! ! ! Correcting IF 3. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.99 FD 1.13 HN 1.00* KP 0.98 ! LA 0.92 MK 1.12 NL 1.21 OV 0.94 ! PT 0.93 SC 1.02 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 0.83 FD 1.09 HN 1.00* KP 1.00* ! LA 0.93 MK 0.97 NL 1.00* OV 0.89 ! PT 1.01 SC 1.07 ! ! ! Fit before self-cal, rms=0.113405Jy sigma=0.000647 ! Fit after self-cal, rms=0.113955Jy sigma=0.000639 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.235 mas, bmaj=9.474 mas, bpa=-0.9749 degrees ! Estimated noise=2978.07 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000474282 Jy ! Component: 100 - total flux cleaned = -0.00054927 Jy ! Component: 150 - total flux cleaned = -0.000649422 Jy ! Component: 200 - total flux cleaned = -0.000709103 Jy ! Total flux subtracted in 200 components = -0.000709103 Jy ! Clean residual min=-0.006870 max=0.006612 Jy/beam ! Clean residual mean=0.000013 rms=0.001830 Jy/beam ! Combined flux in latest and established models = 0.143125 Jy ! Performing phase self-cal ! Adding 6 model components to the UV plane model. ! The established model now contains 41 components and 0.143125 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.113916Jy sigma=0.000638 ! Fit after self-cal, rms=0.113933Jy sigma=0.000638 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.113933Jy sigma=0.000638 ! Fit after self-cal, rms=0.115894Jy sigma=0.000633 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.236 mas, bmaj=9.491 mas, bpa=-1.149 degrees ! Estimated noise=2995.23 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000448906 Jy ! Component: 100 - total flux cleaned = 0.000520209 Jy ! Component: 150 - total flux cleaned = 0.000551654 Jy ! Component: 200 - total flux cleaned = 0.000605742 Jy ! Total flux subtracted in 200 components = 0.000605742 Jy ! Clean residual min=-0.006557 max=0.006755 Jy/beam ! Clean residual mean=0.000040 rms=0.001764 Jy/beam ! Combined flux in latest and established models = 0.14373 Jy selfcal ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 49 components and 0.14373 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.115859Jy sigma=0.000633 ! Fit after self-cal, rms=0.115882Jy sigma=0.000633 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -5.29876e-05 Jy ! Component: 100 - total flux cleaned = -5.31325e-05 Jy ! Component: 150 - total flux cleaned = -2.56417e-06 Jy ! Component: 200 - total flux cleaned = -2.53616e-05 Jy ! Total flux subtracted in 200 components = -2.53616e-05 Jy ! Clean residual min=-0.006551 max=0.006675 Jy/beam ! Clean residual mean=0.000039 rms=0.001765 Jy/beam ! Combined flux in latest and established models = 0.143705 Jy ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 52 components and 0.143705 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.115853Jy sigma=0.000633 ! Fit after self-cal, rms=0.115855Jy sigma=0.000633 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.115855Jy sigma=0.000633 ! Fit after self-cal, rms=0.117310Jy sigma=0.000632 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.239 mas, bmaj=9.505 mas, bpa=-1.317 degrees ! Estimated noise=2991.91 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00034516 Jy ! Component: 100 - total flux cleaned = -0.000289056 Jy ! Component: 150 - total flux cleaned = -0.000268546 Jy ! Component: 200 - total flux cleaned = -0.000308778 Jy ! Total flux subtracted in 200 components = -0.000308778 Jy ! Clean residual min=-0.006460 max=0.006783 Jy/beam ! Clean residual mean=0.000044 rms=0.001746 Jy/beam ! Combined flux in latest and established models = 0.143396 Jy selfcal ! Performing phase self-cal ! Adding 8 model components to the UV plane model. ! The established model now contains 55 components and 0.143396 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.117280Jy sigma=0.000632 ! Fit after self-cal, rms=0.117313Jy sigma=0.000632 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -4.80353e-05 Jy ! Component: 100 - total flux cleaned = -2.46833e-05 Jy ! Component: 150 - total flux cleaned = -5.05948e-06 Jy ! Component: 200 - total flux cleaned = -2.33934e-05 Jy ! Total flux subtracted in 200 components = -2.33934e-05 Jy ! Clean residual min=-0.006456 max=0.006732 Jy/beam ! Clean residual mean=0.000043 rms=0.001745 Jy/beam ! Combined flux in latest and established models = 0.143373 Jy ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 56 components and 0.143373 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.117290Jy sigma=0.000632 ! Fit after self-cal, rms=0.117295Jy sigma=0.000632 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.117295Jy sigma=0.000632 ! Fit after self-cal, rms=0.117395Jy sigma=0.000632 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=9.473 mas, bmaj=26.89 mas, bpa=10.65 degrees ! Estimated noise=3690.15 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000103198 Jy ! Component: 100 - total flux cleaned = -0.00010424 Jy ! Component: 150 - total flux cleaned = -0.000104845 Jy ! Component: 200 - total flux cleaned = -0.000105354 Jy ! Total flux subtracted in 200 components = -0.000105354 Jy ! Clean residual min=-0.006944 max=0.006226 Jy/beam ! Clean residual mean=0.000081 rms=0.002186 Jy/beam ! Combined flux in latest and established models = 0.143268 Jy selfcal ! Performing phase self-cal ! Adding 7 model components to the UV plane model. ! The established model now contains 59 components and 0.143268 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.117393Jy sigma=0.000632 ! Fit after self-cal, rms=0.117401Jy sigma=0.000632 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 9.50036e-07 Jy ! Component: 100 - total flux cleaned = 1.5495e-06 Jy ! Component: 150 - total flux cleaned = 1.9663e-06 Jy ! Component: 200 - total flux cleaned = 1.73938e-06 Jy ! Total flux subtracted in 200 components = 1.73938e-06 Jy ! Clean residual min=-0.006947 max=0.006231 Jy/beam ! Clean residual mean=0.000081 rms=0.002186 Jy/beam ! Combined flux in latest and established models = 0.143269 Jy ! Performing phase self-cal ! Adding 8 model components to the UV plane model. ! The established model now contains 59 components and 0.143269 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.117400Jy sigma=0.000632 ! Fit after self-cal, rms=0.117404Jy sigma=0.000632 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.24 mas, bmaj=9.514 mas, bpa=-1.47 degrees ! Estimated noise=2990.56 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.24 x 9.514 at -1.47 degrees (North through East) ! Clean map min=-0.0060724 max=0.12714 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.584 mas, bmaj=7.753 mas, bpa=-1.373 degrees ! Estimated noise=3916.97 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0994382 Jy ! Component: 100 - total flux cleaned = 0.123663 Jy ! Component: 150 - total flux cleaned = 0.133894 Jy ! Component: 200 - total flux cleaned = 0.139337 Jy ! Total flux subtracted in 200 components = 0.139337 Jy ! Clean residual min=-0.009359 max=0.009716 Jy/beam ! Clean residual mean=0.000017 rms=0.002332 Jy/beam ! Combined flux in latest and established models = 0.139337 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 21 model components to the UV plane model. ! The established model now contains 21 components and 0.139337 Jy ! Inverting map and beam ! Estimated beam: bmin=3.24 mas, bmaj=9.514 mas, bpa=-1.47 degrees ! Estimated noise=2990.56 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00274572 Jy ! Component: 100 - total flux cleaned = 0.00304589 Jy ! Component: 150 - total flux cleaned = 0.00322707 Jy ! Component: 200 - total flux cleaned = 0.0033786 Jy ! Total flux subtracted in 200 components = 0.0033786 Jy ! Clean residual min=-0.006507 max=0.006769 Jy/beam ! Clean residual mean=0.000044 rms=0.001762 Jy/beam ! Combined flux in latest and established models = 0.142716 Jy ! Adding 14 model components to the UV plane model. ! The established model now contains 34 components and 0.142716 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=9.473 mas, bmaj=26.89 mas, bpa=10.65 degrees ! Estimated noise=3690.15 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000466192 Jy ! Component: 100 - total flux cleaned = 0.000465758 Jy ! Component: 150 - total flux cleaned = 0.000451158 Jy ! Component: 200 - total flux cleaned = 0.000449629 Jy ! Total flux subtracted in 200 components = 0.000449629 Jy ! Clean residual min=-0.006969 max=0.006253 Jy/beam ! Clean residual mean=0.000081 rms=0.002194 Jy/beam ! Combined flux in latest and established models = 0.143165 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -1.85614e-06 Jy ! Component: 100 - total flux cleaned = -2.30542e-06 Jy ! Component: 150 - total flux cleaned = -2.30432e-06 Jy ! Component: 200 - total flux cleaned = -4.0022e-06 Jy ! Total flux subtracted in 200 components = -4.0022e-06 Jy ! Clean residual min=-0.006977 max=0.006253 Jy/beam ! Clean residual mean=0.000081 rms=0.002192 Jy/beam ! Combined flux in latest and established models = 0.143161 Jy ! Adding 5 model components to the UV plane model. ! The established model now contains 37 components and 0.143162 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.24 mas, bmaj=9.514 mas, bpa=-1.47 degrees ! Estimated noise=2990.56 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -1.97793e-06 Jy ! Component: 100 - total flux cleaned = -7.52443e-05 Jy ! Component: 150 - total flux cleaned = -0.000139107 Jy ! Component: 200 - total flux cleaned = -0.000167544 Jy ! Total flux subtracted in 200 components = -0.000167544 Jy ! Clean residual min=-0.006428 max=0.006783 Jy/beam ! Clean residual mean=0.000044 rms=0.001758 Jy/beam ! Combined flux in latest and established models = 0.142994 Jy selfcal ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 46 components and 0.142994 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.117452Jy sigma=0.000632 ! Fit after self-cal, rms=0.117459Jy sigma=0.000632 wmodel J1607-3331_S_2017_03_27_pus_map.mod ! Writing 46 model components to file: J1607-3331_S_2017_03_27_pus_map.mod wobs J1607-3331_S_2017_03_27_pus_uvs.fits ! Writing UV FITS file: J1607-3331_S_2017_03_27_pus_uvs.fits wwins J1607-3331_S_2017_03_27_pus_map.win ! wwins: Wrote 1 windows to J1607-3331_S_2017_03_27_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.000396174 Jy ! Component: 100 - total flux cleaned = 0.000935881 Jy ! Component: 150 - total flux cleaned = 0.0017522 Jy ! Component: 200 - total flux cleaned = 0.0021376 Jy ! Component: 250 - total flux cleaned = 0.00204545 Jy ! Component: 300 - total flux cleaned = 0.00213655 Jy ! Component: 350 - total flux cleaned = 0.00213662 Jy ! Component: 400 - total flux cleaned = 0.00230827 Jy ! Component: 450 - total flux cleaned = 0.00230923 Jy ! Component: 500 - total flux cleaned = 0.00271413 Jy ! Component: 550 - total flux cleaned = 0.003266 Jy ! Component: 600 - total flux cleaned = 0.00380501 Jy ! Component: 650 - total flux cleaned = 0.00440663 Jy ! Component: 700 - total flux cleaned = 0.00484734 Jy ! Component: 750 - total flux cleaned = 0.00527958 Jy ! Component: 800 - total flux cleaned = 0.00570173 Jy ! Component: 850 - total flux cleaned = 0.00611558 Jy ! Component: 900 - total flux cleaned = 0.00665384 Jy ! Component: 950 - total flux cleaned = 0.00698292 Jy ! Component: 1000 - total flux cleaned = 0.00736978 Jy ! Component: 1050 - total flux cleaned = 0.00768591 Jy ! Component: 1100 - total flux cleaned = 0.00799555 Jy ! Component: 1150 - total flux cleaned = 0.00817916 Jy ! Component: 1200 - total flux cleaned = 0.00841832 Jy ! Component: 1250 - total flux cleaned = 0.00877061 Jy ! Component: 1300 - total flux cleaned = 0.00905734 Jy ! Component: 1350 - total flux cleaned = 0.00922547 Jy ! Component: 1400 - total flux cleaned = 0.00939149 Jy ! Component: 1450 - total flux cleaned = 0.00944623 Jy ! Component: 1500 - total flux cleaned = 0.00960739 Jy ! Component: 1550 - total flux cleaned = 0.00987059 Jy ! Component: 1600 - total flux cleaned = 0.00981829 Jy ! Component: 1650 - total flux cleaned = 0.00956398 Jy ! Component: 1700 - total flux cleaned = 0.00981405 Jy ! Component: 1750 - total flux cleaned = 0.0096171 Jy ! Component: 1800 - total flux cleaned = 0.0096184 Jy ! Component: 1850 - total flux cleaned = 0.00971483 Jy ! Component: 1900 - total flux cleaned = 0.00980977 Jy ! Component: 1950 - total flux cleaned = 0.00962328 Jy ! Component: 2000 - total flux cleaned = 0.00966955 Jy ! Component: 2050 - total flux cleaned = 0.00962339 Jy ! Component: 2100 - total flux cleaned = 0.00948794 Jy ! Component: 2150 - total flux cleaned = 0.00935478 Jy ! Component: 2200 - total flux cleaned = 0.00918011 Jy ! Component: 2250 - total flux cleaned = 0.00909389 Jy ! Component: 2300 - total flux cleaned = 0.00879516 Jy ! Component: 2350 - total flux cleaned = 0.00854164 Jy ! Component: 2400 - total flux cleaned = 0.00824975 Jy ! Component: 2450 - total flux cleaned = 0.00812646 Jy ! Component: 2500 - total flux cleaned = 0.00800429 Jy ! Component: 2550 - total flux cleaned = 0.00776242 Jy ! Component: 2600 - total flux cleaned = 0.00764283 Jy ! Component: 2650 - total flux cleaned = 0.00748488 Jy ! Component: 2700 - total flux cleaned = 0.00732784 Jy ! Component: 2750 - total flux cleaned = 0.0071731 Jy ! Component: 2800 - total flux cleaned = 0.00709622 Jy ! Component: 2850 - total flux cleaned = 0.00679184 Jy ! Component: 2900 - total flux cleaned = 0.00667844 Jy ! Component: 2950 - total flux cleaned = 0.00641659 Jy ! Component: 3000 - total flux cleaned = 0.00623184 Jy ! Component: 3050 - total flux cleaned = 0.00601152 Jy ! Component: 3100 - total flux cleaned = 0.00582922 Jy ! Component: 3150 - total flux cleaned = 0.0056489 Jy ! Component: 3200 - total flux cleaned = 0.00543349 Jy ! Component: 3250 - total flux cleaned = 0.00525564 Jy ! Component: 3300 - total flux cleaned = 0.0050083 Jy ! Component: 3350 - total flux cleaned = 0.00490301 Jy ! Component: 3400 - total flux cleaned = 0.00462487 Jy ! Component: 3450 - total flux cleaned = 0.00441787 Jy ! Component: 3500 - total flux cleaned = 0.00428075 Jy ! Component: 3550 - total flux cleaned = 0.00411048 Jy ! Component: 3600 - total flux cleaned = 0.00400912 Jy ! Component: 3650 - total flux cleaned = 0.00380778 Jy ! Component: 3700 - total flux cleaned = 0.00364148 Jy ! Component: 3750 - total flux cleaned = 0.00347661 Jy ! Component: 3800 - total flux cleaned = 0.00341097 Jy ! Component: 3850 - total flux cleaned = 0.00324769 Jy ! Component: 3900 - total flux cleaned = 0.00315056 Jy ! Component: 3950 - total flux cleaned = 0.0030218 Jy ! Component: 4000 - total flux cleaned = 0.00283022 Jy ! Component: 4050 - total flux cleaned = 0.00279856 Jy ! Total flux subtracted in 4096 components = 0.00270385 Jy ! Clean residual min=-0.001880 max=0.002042 Jy/beam ! Clean residual mean=0.000004 rms=0.000580 Jy/beam ! Combined flux in latest and established models = 0.145698 Jy keep ! Adding 259 model components to the UV plane model. ! The established model now contains 305 components and 0.145698 Jy ![Exited script file: muppet] wmap "J1607-3331_S_2017_03_27_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.24 x 9.514 at -1.47 degrees (North through East) ! Clean map min=-0.0038031 max=0.12722 Jy/beam ! Writing clean map to FITS file: J1607-3331_S_2017_03_27_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.127221 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.00056971 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -1.34344 1.34344 2.68688 5.37375 10.7475 21.495 42.99 85.98 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0017 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.127 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.24 x 9.514 at -1.47 degrees (North through East) ! Clean map min=-0.0038031 max=0.12722 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J1607-3331_S_2017_03_27_pus_uvs.log closed on Sun Apr 28 14:44:42 2019