! Started logfile: J1607-3331_S_2017_03_23_pus_uvs.log on Mon May 13 10:03:27 2019 obs J1607-3331_S_2017_03_23_pus_uva.fits ! Reading UV FITS file: J1607-3331_S_2017_03_23_pus_uva.fits ! AN table 1: 8 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.716667 visibilities/baseline/integration-bin. ! Found source: J1607-3331 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 481 lines of history. ! ! Reading 1032 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J1607-3331_S_2017_03_23_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 21 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 13 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 13 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 45 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.929303Jy sigma=0.005891 ! Fit after self-cal, rms=0.874659Jy sigma=0.005606 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.511 mas, bmaj=6.758 mas, bpa=4.332 degrees ! Estimated noise=4800.56 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0960448 Jy ! Component: 100 - total flux cleaned = 0.123467 Jy ! Total flux subtracted in 100 components = 0.123467 Jy ! Clean residual min=-0.015021 max=0.013652 Jy/beam ! Clean residual mean=-0.000143 rms=0.003757 Jy/beam ! Combined flux in latest and established models = 0.123467 Jy ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 11 components and 0.123467 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.118028Jy sigma=0.000680 ! Fit after self-cal, rms=0.117822Jy sigma=0.000679 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.067 mas, bmaj=7.99 mas, bpa=5.265 degrees ! Estimated noise=4035.64 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0171986 Jy ! Component: 100 - total flux cleaned = 0.0241375 Jy ! Component: 150 - total flux cleaned = 0.0275401 Jy ! Component: 200 - total flux cleaned = 0.0284608 Jy ! Total flux subtracted in 200 components = 0.0284608 Jy ! Clean residual min=-0.014333 max=0.010906 Jy/beam ! Clean residual mean=-0.000190 rms=0.003106 Jy/beam ! Combined flux in latest and established models = 0.151927 Jy ! Performing phase self-cal ! Adding 27 model components to the UV plane model. ! The established model now contains 32 components and 0.151927 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.115601Jy sigma=0.000664 ! Fit after self-cal, rms=0.115505Jy sigma=0.000664 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.06 FD 1.06 HN 1.00* KP 0.98 ! LA 0.94 MK 0.88 NL 1.00* OV 1.02 ! PT 0.91 SC 0.88 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 0.97 FD 1.03 HN 1.00* KP 0.94 ! LA 0.91 MK 0.83 NL 1.22 OV 1.06 ! PT 1.02 SC 1.00 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 1.05 FD 1.05 HN 1.00* KP 0.83 ! LA 0.79 MK 2.18 NL 1.35 OV 0.97 ! PT 0.84 SC 1.12 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 1.08 FD 1.17 HN 1.00* KP 1.00* ! LA 1.00* MK 0.81 NL 1.00* OV 1.22 ! PT 0.98 SC 1.00* ! ! ! Fit before self-cal, rms=0.115505Jy sigma=0.000664 ! Fit after self-cal, rms=0.127705Jy sigma=0.000646 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.104 mas, bmaj=8.017 mas, bpa=5.653 degrees ! Estimated noise=4048.72 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00141397 Jy ! Component: 100 - total flux cleaned = -0.00148525 Jy ! Component: 150 - total flux cleaned = -0.00161037 Jy ! Component: 200 - total flux cleaned = -0.00160949 Jy ! Total flux subtracted in 200 components = -0.00160949 Jy ! Clean residual min=-0.009387 max=0.008841 Jy/beam ! Clean residual mean=-0.000059 rms=0.002408 Jy/beam ! Combined flux in latest and established models = 0.150318 Jy ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 41 components and 0.150318 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.127591Jy sigma=0.000645 ! Fit after self-cal, rms=0.127947Jy sigma=0.000645 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.127947Jy sigma=0.000645 ! Fit after self-cal, rms=0.128374Jy sigma=0.000645 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.103 mas, bmaj=8.029 mas, bpa=5.306 degrees ! Estimated noise=4023.22 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00135747 Jy ! Component: 100 - total flux cleaned = -0.00141443 Jy ! Component: 150 - total flux cleaned = -0.00146656 Jy ! Component: 200 - total flux cleaned = -0.00156509 Jy ! Total flux subtracted in 200 components = -0.00156509 Jy ! Clean residual min=-0.009325 max=0.008582 Jy/beam ! Clean residual mean=-0.000056 rms=0.002369 Jy/beam ! Combined flux in latest and established models = 0.148753 Jy selfcal ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 45 components and 0.148753 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.128277Jy sigma=0.000644 ! Fit after self-cal, rms=0.128304Jy sigma=0.000644 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000151244 Jy ! Component: 100 - total flux cleaned = -0.000198253 Jy ! Component: 150 - total flux cleaned = -0.000289443 Jy ! Component: 200 - total flux cleaned = -0.000376428 Jy ! Total flux subtracted in 200 components = -0.000376428 Jy ! Clean residual min=-0.009332 max=0.008601 Jy/beam ! Clean residual mean=-0.000058 rms=0.002364 Jy/beam ! Combined flux in latest and established models = 0.148376 Jy ! Performing phase self-cal ! Adding 8 model components to the UV plane model. ! The established model now contains 45 components and 0.148376 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.128234Jy sigma=0.000644 ! Fit after self-cal, rms=0.128241Jy sigma=0.000644 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.128241Jy sigma=0.000644 ! Fit after self-cal, rms=0.127783Jy sigma=0.000644 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.106 mas, bmaj=8.043 mas, bpa=5.111 degrees ! Estimated noise=4003.38 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00110647 Jy ! Component: 100 - total flux cleaned = -0.00128427 Jy ! Component: 150 - total flux cleaned = -0.00136811 Jy ! Component: 200 - total flux cleaned = -0.0014475 Jy ! Total flux subtracted in 200 components = -0.0014475 Jy ! Clean residual min=-0.009232 max=0.008530 Jy/beam ! Clean residual mean=-0.000056 rms=0.002335 Jy/beam ! Combined flux in latest and established models = 0.146929 Jy selfcal ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 45 components and 0.146929 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.127718Jy sigma=0.000644 ! Fit after self-cal, rms=0.127730Jy sigma=0.000644 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000116529 Jy ! Component: 100 - total flux cleaned = -0.000272824 Jy ! Component: 150 - total flux cleaned = -0.000345462 Jy ! Component: 200 - total flux cleaned = -0.000414821 Jy ! Total flux subtracted in 200 components = -0.000414821 Jy ! Clean residual min=-0.009228 max=0.008548 Jy/beam ! Clean residual mean=-0.000057 rms=0.002332 Jy/beam ! Combined flux in latest and established models = 0.146514 Jy ! Performing phase self-cal ! Adding 8 model components to the UV plane model. ! The established model now contains 46 components and 0.146514 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.127684Jy sigma=0.000644 ! Fit after self-cal, rms=0.127690Jy sigma=0.000644 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.127690Jy sigma=0.000644 ! Fit after self-cal, rms=0.127591Jy sigma=0.000644 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.843 mas, bmaj=25.45 mas, bpa=11.86 degrees ! Estimated noise=4993.75 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00133121 Jy ! Component: 100 - total flux cleaned = -0.00139963 Jy ! Component: 150 - total flux cleaned = -0.00146264 Jy ! Component: 200 - total flux cleaned = -0.00152199 Jy ! Total flux subtracted in 200 components = -0.00152199 Jy ! Clean residual min=-0.008468 max=0.009306 Jy/beam ! Clean residual mean=-0.000108 rms=0.002934 Jy/beam ! Combined flux in latest and established models = 0.144992 Jy selfcal ! Performing phase self-cal ! Adding 5 model components to the UV plane model. ! The established model now contains 50 components and 0.144992 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.127584Jy sigma=0.000644 ! Fit after self-cal, rms=0.127595Jy sigma=0.000644 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000312617 Jy ! Component: 100 - total flux cleaned = -0.000310625 Jy ! Component: 150 - total flux cleaned = -0.000308383 Jy ! Component: 200 - total flux cleaned = -0.000307834 Jy ! Total flux subtracted in 200 components = -0.000307834 Jy ! Clean residual min=-0.008520 max=0.009315 Jy/beam ! Clean residual mean=-0.000110 rms=0.002933 Jy/beam ! Combined flux in latest and established models = 0.144684 Jy ! Performing phase self-cal ! Adding 8 model components to the UV plane model. ! The established model now contains 53 components and 0.144684 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.127584Jy sigma=0.000644 ! Fit after self-cal, rms=0.127580Jy sigma=0.000644 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.112 mas, bmaj=8.063 mas, bpa=4.967 degrees ! Estimated noise=3989.77 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.112 x 8.063 at 4.967 degrees (North through East) ! Clean map min=-0.0087877 max=0.13518 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.539 mas, bmaj=6.774 mas, bpa=4.441 degrees ! Estimated noise=4810 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0955191 Jy ! Component: 100 - total flux cleaned = 0.12304 Jy ! Component: 150 - total flux cleaned = 0.13497 Jy ! Component: 200 - total flux cleaned = 0.140044 Jy ! Total flux subtracted in 200 components = 0.140044 Jy ! Clean residual min=-0.011093 max=0.010778 Jy/beam ! Clean residual mean=-0.000047 rms=0.002906 Jy/beam ! Combined flux in latest and established models = 0.140044 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 26 model components to the UV plane model. ! The established model now contains 26 components and 0.140044 Jy ! Inverting map and beam ! Estimated beam: bmin=3.112 mas, bmaj=8.063 mas, bpa=4.967 degrees ! Estimated noise=3989.77 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00455059 Jy ! Component: 100 - total flux cleaned = 0.00511038 Jy ! Component: 150 - total flux cleaned = 0.00545282 Jy ! Component: 200 - total flux cleaned = 0.00581963 Jy ! Total flux subtracted in 200 components = 0.00581963 Jy ! Clean residual min=-0.009206 max=0.008673 Jy/beam ! Clean residual mean=-0.000053 rms=0.002344 Jy/beam ! Combined flux in latest and established models = 0.145864 Jy ! Adding 18 model components to the UV plane model. ! The established model now contains 34 components and 0.145864 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.843 mas, bmaj=25.45 mas, bpa=11.86 degrees ! Estimated noise=4993.75 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000260251 Jy ! Component: 100 - total flux cleaned = 0.000265415 Jy ! Component: 150 - total flux cleaned = 0.00015541 Jy ! Component: 200 - total flux cleaned = 5.0789e-05 Jy ! Total flux subtracted in 200 components = 5.0789e-05 Jy ! Clean residual min=-0.008542 max=0.009241 Jy/beam ! Clean residual mean=-0.000101 rms=0.002935 Jy/beam ! Combined flux in latest and established models = 0.145914 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000101891 Jy ! Component: 100 - total flux cleaned = -0.000198332 Jy ! Component: 150 - total flux cleaned = -0.000320863 Jy ! Component: 200 - total flux cleaned = -0.000407269 Jy ! Total flux subtracted in 200 components = -0.000407269 Jy ! Clean residual min=-0.008546 max=0.009225 Jy/beam ! Clean residual mean=-0.000104 rms=0.002928 Jy/beam ! Combined flux in latest and established models = 0.145507 Jy ! Adding 7 model components to the UV plane model. ! The established model now contains 39 components and 0.145507 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.112 mas, bmaj=8.063 mas, bpa=4.967 degrees ! Estimated noise=3989.77 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000483536 Jy ! Component: 100 - total flux cleaned = -0.000541236 Jy ! Component: 150 - total flux cleaned = -0.000542295 Jy ! Component: 200 - total flux cleaned = -0.00059486 Jy ! Total flux subtracted in 200 components = -0.00059486 Jy ! Clean residual min=-0.009136 max=0.008596 Jy/beam ! Clean residual mean=-0.000057 rms=0.002312 Jy/beam ! Combined flux in latest and established models = 0.144912 Jy selfcal ! Performing phase self-cal ! Adding 6 model components to the UV plane model. ! The established model now contains 43 components and 0.144912 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.127656Jy sigma=0.000644 ! Fit after self-cal, rms=0.127669Jy sigma=0.000644 wmodel J1607-3331_S_2017_03_23_pus_map.mod ! Writing 43 model components to file: J1607-3331_S_2017_03_23_pus_map.mod wobs J1607-3331_S_2017_03_23_pus_uvs.fits ! Writing UV FITS file: J1607-3331_S_2017_03_23_pus_uvs.fits wwins J1607-3331_S_2017_03_23_pus_map.win ! wwins: Wrote 1 windows to J1607-3331_S_2017_03_23_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.00121736 Jy ! Component: 100 - total flux cleaned = -0.00194914 Jy ! Component: 150 - total flux cleaned = -0.00183241 Jy ! Component: 200 - total flux cleaned = -0.00122637 Jy ! Component: 250 - total flux cleaned = -0.000884516 Jy ! Component: 300 - total flux cleaned = -0.000558908 Jy ! Component: 350 - total flux cleaned = -4.49786e-05 Jy ! Component: 400 - total flux cleaned = 5.64805e-05 Jy ! Component: 450 - total flux cleaned = 0.000343589 Jy ! Component: 500 - total flux cleaned = 0.00025151 Jy ! Component: 550 - total flux cleaned = 0.00033788 Jy ! Component: 600 - total flux cleaned = -9.70542e-05 Jy ! Component: 650 - total flux cleaned = -0.000519144 Jy ! Component: 700 - total flux cleaned = -0.00109414 Jy ! Component: 750 - total flux cleaned = -0.00157357 Jy ! Component: 800 - total flux cleaned = -0.00212034 Jy ! Component: 850 - total flux cleaned = -0.00265293 Jy ! Component: 900 - total flux cleaned = -0.00279968 Jy ! Component: 950 - total flux cleaned = -0.00294473 Jy ! Component: 1000 - total flux cleaned = -0.00315764 Jy ! Component: 1050 - total flux cleaned = -0.00329812 Jy ! Component: 1100 - total flux cleaned = -0.00357145 Jy ! Component: 1150 - total flux cleaned = -0.00377284 Jy ! Component: 1200 - total flux cleaned = -0.00377256 Jy ! Component: 1250 - total flux cleaned = -0.00383709 Jy ! Component: 1300 - total flux cleaned = -0.00371021 Jy ! Component: 1350 - total flux cleaned = -0.00383563 Jy ! Component: 1400 - total flux cleaned = -0.00383554 Jy ! Component: 1450 - total flux cleaned = -0.00383589 Jy ! Component: 1500 - total flux cleaned = -0.00401382 Jy ! Component: 1550 - total flux cleaned = -0.00383698 Jy ! Component: 1600 - total flux cleaned = -0.00383683 Jy ! Component: 1650 - total flux cleaned = -0.00389414 Jy ! Component: 1700 - total flux cleaned = -0.00395048 Jy ! Component: 1750 - total flux cleaned = -0.00406233 Jy ! Component: 1800 - total flux cleaned = -0.00406244 Jy ! Component: 1850 - total flux cleaned = -0.00411711 Jy ! Component: 1900 - total flux cleaned = -0.00411653 Jy ! Component: 1950 - total flux cleaned = -0.00395549 Jy ! Component: 2000 - total flux cleaned = -0.00400902 Jy ! Component: 2050 - total flux cleaned = -0.00400901 Jy ! Component: 2100 - total flux cleaned = -0.00400935 Jy ! Component: 2150 - total flux cleaned = -0.00395742 Jy ! Component: 2200 - total flux cleaned = -0.00390595 Jy ! Component: 2250 - total flux cleaned = -0.00365015 Jy ! Component: 2300 - total flux cleaned = -0.00339607 Jy ! Component: 2350 - total flux cleaned = -0.00314374 Jy ! Component: 2400 - total flux cleaned = -0.0029433 Jy ! Component: 2450 - total flux cleaned = -0.0026931 Jy ! Component: 2500 - total flux cleaned = -0.00254331 Jy ! Component: 2550 - total flux cleaned = -0.00234373 Jy ! Component: 2600 - total flux cleaned = -0.00219391 Jy ! Component: 2650 - total flux cleaned = -0.00204397 Jy ! Component: 2700 - total flux cleaned = -0.0018941 Jy ! Component: 2750 - total flux cleaned = -0.0017939 Jy ! Component: 2800 - total flux cleaned = -0.00174394 Jy ! Component: 2850 - total flux cleaned = -0.00159389 Jy ! Component: 2900 - total flux cleaned = -0.00149346 Jy ! Component: 2950 - total flux cleaned = -0.00144324 Jy ! Component: 3000 - total flux cleaned = -0.00124172 Jy ! Component: 3050 - total flux cleaned = -0.00108971 Jy ! Component: 3100 - total flux cleaned = -0.000936783 Jy ! Component: 3150 - total flux cleaned = -0.000834804 Jy ! Component: 3200 - total flux cleaned = -0.000629673 Jy ! Component: 3250 - total flux cleaned = -0.00062911 Jy ! Component: 3300 - total flux cleaned = -0.00057741 Jy ! Component: 3350 - total flux cleaned = -0.000525346 Jy ! Component: 3400 - total flux cleaned = -0.000420077 Jy ! Component: 3450 - total flux cleaned = -0.000420181 Jy ! Component: 3500 - total flux cleaned = -0.000419912 Jy ! Component: 3550 - total flux cleaned = -0.000419829 Jy ! Component: 3600 - total flux cleaned = -0.000419688 Jy ! Component: 3650 - total flux cleaned = -0.000419863 Jy ! Component: 3700 - total flux cleaned = -0.000419664 Jy ! Component: 3750 - total flux cleaned = -0.000419376 Jy ! Component: 3800 - total flux cleaned = -0.000474186 Jy ! Component: 3850 - total flux cleaned = -0.000473664 Jy ! Component: 3900 - total flux cleaned = -0.000585819 Jy ! Component: 3950 - total flux cleaned = -0.000585985 Jy ! Component: 4000 - total flux cleaned = -0.000700292 Jy ! Component: 4050 - total flux cleaned = -0.000699806 Jy ! Total flux subtracted in 4096 components = -0.000873462 Jy ! Clean residual min=-0.003797 max=0.003421 Jy/beam ! Clean residual mean=0.000030 rms=0.000988 Jy/beam ! Combined flux in latest and established models = 0.144039 Jy keep ! Adding 213 model components to the UV plane model. ! The established model now contains 256 components and 0.144039 Jy ![Exited script file: muppet] wmap "J1607-3331_S_2017_03_23_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.112 x 8.063 at 4.967 degrees (North through East) ! Clean map min=-0.0080609 max=0.13122 Jy/beam ! Writing clean map to FITS file: J1607-3331_S_2017_03_23_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.131218 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.0010162 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -2.3233 2.3233 4.64661 9.29322 18.5864 37.1729 74.3457 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.003 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.131 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.112 x 8.063 at 4.967 degrees (North through East) ! Clean map min=-0.0080609 max=0.13122 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J1607-3331_S_2017_03_23_pus_uvs.log closed on Mon May 13 10:03:31 2019