! Started logfile: J1607-3331_S_2017_02_24_pus_uvs.log on Sat May 4 11:30:14 2019 obs J1607-3331_S_2017_02_24_pus_uva.fits ! Reading UV FITS file: J1607-3331_S_2017_02_24_pus_uva.fits ! AN table 1: 22 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.764646 visibilities/baseline/integration-bin. ! Found source: J1607-3331 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 823 lines of history. ! ! Reading 3028 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J1607-3331_S_2017_02_24_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 28 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 28 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 28 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 94 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.937427Jy sigma=0.031585 ! Fit after self-cal, rms=0.869974Jy sigma=0.031499 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.982 mas, bmaj=6.882 mas, bpa=-1.353 degrees ! Estimated noise=1987.46 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0683886 Jy ! Component: 100 - total flux cleaned = 0.0869665 Jy ! Total flux subtracted in 100 components = 0.0869665 Jy ! Clean residual min=-0.029096 max=0.033245 Jy/beam ! Clean residual mean=0.000020 rms=0.009108 Jy/beam ! Combined flux in latest and established models = 0.0869665 Jy ! Performing phase self-cal ! Adding 5 model components to the UV plane model. ! The established model now contains 5 components and 0.0869665 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.270462Jy sigma=0.002490 ! Fit after self-cal, rms=0.270446Jy sigma=0.002439 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.678 mas, bmaj=8.448 mas, bpa=0.5078 degrees ! Estimated noise=1424.61 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0151409 Jy ! Component: 100 - total flux cleaned = 0.0221646 Jy ! Component: 150 - total flux cleaned = 0.0231296 Jy ! Component: 200 - total flux cleaned = 0.0237478 Jy ! Total flux subtracted in 200 components = 0.0237478 Jy ! Clean residual min=-0.027359 max=0.033351 Jy/beam ! Clean residual mean=-0.000045 rms=0.009159 Jy/beam ! Combined flux in latest and established models = 0.110714 Jy ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 12 components and 0.110714 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.266809Jy sigma=0.002610 ! Fit after self-cal, rms=0.266812Jy sigma=0.002610 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.75 FD 0.70 HN 1.03 KP 0.76 ! LA 0.78 MK 0.90 NL 0.77 OV 0.80 ! PT 0.79 SC 0.62 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 0.70 FD 0.75 HN 0.87 KP 0.71 ! LA 0.79 MK 0.77 NL 0.79 OV 0.76 ! PT 0.75 SC 0.71 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 20.17 FD 0.60 HN 0.76 KP 1.02 ! LA 0.85 MK 1.09 NL 1.02 OV 1.32 ! PT 0.86 SC 0.60 ! ! ! Correcting IF 4. ! A total of 9 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.86 FD 0.77 HN 0.78 KP 1.00* ! LA 0.56 MK 0.85 NL 1.00* OV 0.73 ! PT 0.72 SC 1.00* ! ! ! Fit before self-cal, rms=0.266812Jy sigma=0.002610 ! Fit after self-cal, rms=0.762012Jy sigma=0.000761 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.211 mas, bmaj=8.173 mas, bpa=-1.571 degrees ! Estimated noise=1645.06 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00604235 Jy ! Component: 100 - total flux cleaned = 0.00646094 Jy ! Component: 150 - total flux cleaned = 0.00646424 Jy ! Component: 200 - total flux cleaned = 0.0063198 Jy ! Total flux subtracted in 200 components = 0.0063198 Jy ! Clean residual min=-0.008107 max=0.006305 Jy/beam ! Clean residual mean=-0.000008 rms=0.001730 Jy/beam ! Combined flux in latest and established models = 0.117034 Jy ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 28 components and 0.117034 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.760732Jy sigma=0.000759 ! Fit after self-cal, rms=0.760400Jy sigma=0.000738 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.760400Jy sigma=0.000738 ! Fit after self-cal, rms=1.064248Jy sigma=0.000709 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.218 mas, bmaj=8.355 mas, bpa=-2.252 degrees ! Estimated noise=1718.68 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00781107 Jy ! Component: 100 - total flux cleaned = 0.00908114 Jy ! Component: 150 - total flux cleaned = 0.00957253 Jy ! Component: 200 - total flux cleaned = 0.00973369 Jy ! Total flux subtracted in 200 components = 0.00973369 Jy ! Clean residual min=-0.007407 max=0.006279 Jy/beam ! Clean residual mean=0.000038 rms=0.001630 Jy/beam ! Combined flux in latest and established models = 0.126768 Jy selfcal ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 40 components and 0.126768 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=1.063100Jy sigma=0.000708 ! Fit after self-cal, rms=1.063099Jy sigma=0.000706 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 2.21601e-05 Jy ! Component: 100 - total flux cleaned = -4.49832e-05 Jy ! Component: 150 - total flux cleaned = -0.000108529 Jy ! Component: 200 - total flux cleaned = -0.000108431 Jy ! Total flux subtracted in 200 components = -0.000108431 Jy ! Clean residual min=-0.007147 max=0.006394 Jy/beam ! Clean residual mean=0.000038 rms=0.001596 Jy/beam ! Combined flux in latest and established models = 0.126659 Jy ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 44 components and 0.126659 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=1.063036Jy sigma=0.000706 ! Fit after self-cal, rms=1.063034Jy sigma=0.000706 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=1.063034Jy sigma=0.000706 ! Fit after self-cal, rms=0.140532Jy sigma=0.000669 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.219 mas, bmaj=8.425 mas, bpa=-2.338 degrees ! Estimated noise=1712.45 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000477501 Jy ! Component: 100 - total flux cleaned = -0.00047504 Jy ! Component: 150 - total flux cleaned = -0.000474549 Jy ! Component: 200 - total flux cleaned = -0.000517298 Jy ! Total flux subtracted in 200 components = -0.000517298 Jy ! Clean residual min=-0.004540 max=0.004377 Jy/beam ! Clean residual mean=0.000014 rms=0.001083 Jy/beam ! Combined flux in latest and established models = 0.126142 Jy selfcal ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 45 components and 0.126142 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.140493Jy sigma=0.000669 ! Fit after self-cal, rms=0.141008Jy sigma=0.000667 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000297338 Jy ! Component: 100 - total flux cleaned = -0.000294518 Jy ! Component: 150 - total flux cleaned = -0.000290669 Jy ! Component: 200 - total flux cleaned = -0.000329628 Jy ! Total flux subtracted in 200 components = -0.000329628 Jy ! Clean residual min=-0.004270 max=0.004317 Jy/beam ! Clean residual mean=0.000013 rms=0.001078 Jy/beam ! Combined flux in latest and established models = 0.125813 Jy ! Performing phase self-cal ! Adding 7 model components to the UV plane model. ! The established model now contains 48 components and 0.125813 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.140966Jy sigma=0.000667 ! Fit after self-cal, rms=0.140988Jy sigma=0.000667 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.140988Jy sigma=0.000667 ! Fit after self-cal, rms=0.140109Jy sigma=0.000667 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.406 mas, bmaj=22.72 mas, bpa=6.568 degrees ! Estimated noise=2072.69 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000458243 Jy ! Component: 100 - total flux cleaned = 0.000482182 Jy ! Component: 150 - total flux cleaned = 0.000481508 Jy ! Component: 200 - total flux cleaned = 0.000462819 Jy ! Total flux subtracted in 200 components = 0.000462819 Jy ! Clean residual min=-0.004249 max=0.003957 Jy/beam ! Clean residual mean=0.000031 rms=0.001217 Jy/beam ! Combined flux in latest and established models = 0.126275 Jy selfcal ! Performing phase self-cal ! Adding 8 model components to the UV plane model. ! The established model now contains 55 components and 0.126275 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.140117Jy sigma=0.000667 ! Fit after self-cal, rms=0.140208Jy sigma=0.000667 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -2.75736e-05 Jy ! Component: 100 - total flux cleaned = -2.70814e-05 Jy ! Component: 150 - total flux cleaned = -2.70492e-05 Jy ! Component: 200 - total flux cleaned = -2.96773e-05 Jy ! Total flux subtracted in 200 components = -2.96773e-05 Jy ! Clean residual min=-0.004220 max=0.003945 Jy/beam ! Clean residual mean=0.000031 rms=0.001215 Jy/beam ! Combined flux in latest and established models = 0.126246 Jy ! Performing phase self-cal ! Adding 8 model components to the UV plane model. ! The established model now contains 60 components and 0.126246 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.140219Jy sigma=0.000667 ! Fit after self-cal, rms=0.140235Jy sigma=0.000667 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.215 mas, bmaj=8.388 mas, bpa=-2.27 degrees ! Estimated noise=1709.87 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.215 x 8.388 at -2.27 degrees (North through East) ! Clean map min=-0.0040886 max=0.094351 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.571 mas, bmaj=6.899 mas, bpa=-4.898 degrees ! Estimated noise=2264.88 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.079463 Jy ! Component: 100 - total flux cleaned = 0.0995269 Jy ! Component: 150 - total flux cleaned = 0.10899 Jy ! Component: 200 - total flux cleaned = 0.114658 Jy ! Total flux subtracted in 200 components = 0.114658 Jy ! Clean residual min=-0.006827 max=0.006039 Jy/beam ! Clean residual mean=0.000006 rms=0.001442 Jy/beam ! Combined flux in latest and established models = 0.114658 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 20 model components to the UV plane model. ! The established model now contains 20 components and 0.114658 Jy ! Inverting map and beam ! Estimated beam: bmin=3.215 mas, bmaj=8.388 mas, bpa=-2.27 degrees ! Estimated noise=1709.87 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (4, -3.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00598418 Jy ! Component: 100 - total flux cleaned = 0.00916786 Jy ! Component: 150 - total flux cleaned = 0.0101839 Jy ! Component: 200 - total flux cleaned = 0.0103858 Jy ! Total flux subtracted in 200 components = 0.0103858 Jy ! Clean residual min=-0.004250 max=0.003942 Jy/beam ! Clean residual mean=0.000015 rms=0.001049 Jy/beam ! Combined flux in latest and established models = 0.125044 Jy ! Adding 24 model components to the UV plane model. ! The established model now contains 43 components and 0.125044 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.406 mas, bmaj=22.72 mas, bpa=6.568 degrees ! Estimated noise=2072.69 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000977268 Jy ! Component: 100 - total flux cleaned = 0.00100697 Jy ! Component: 150 - total flux cleaned = 0.00105271 Jy ! Component: 200 - total flux cleaned = 0.00107068 Jy ! Total flux subtracted in 200 components = 0.00107068 Jy ! Clean residual min=-0.004036 max=0.003881 Jy/beam ! Clean residual mean=0.000031 rms=0.001211 Jy/beam ! Combined flux in latest and established models = 0.126115 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -1.57746e-07 Jy ! Component: 100 - total flux cleaned = -9.76001e-07 Jy ! Component: 150 - total flux cleaned = -1.37443e-06 Jy ! Component: 200 - total flux cleaned = -1.10334e-06 Jy ! Total flux subtracted in 200 components = -1.10334e-06 Jy ! Clean residual min=-0.004056 max=0.003879 Jy/beam ! Clean residual mean=0.000031 rms=0.001211 Jy/beam ! Combined flux in latest and established models = 0.126114 Jy ! Adding 19 model components to the UV plane model. ! The established model now contains 60 components and 0.126114 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.215 mas, bmaj=8.388 mas, bpa=-2.27 degrees ! Estimated noise=1709.87 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -4.0922e-06 Jy ! Component: 100 - total flux cleaned = -0.000134122 Jy ! Component: 150 - total flux cleaned = -0.000174437 Jy ! Component: 200 - total flux cleaned = -0.000253095 Jy ! Total flux subtracted in 200 components = -0.000253095 Jy ! Clean residual min=-0.004179 max=0.004120 Jy/beam ! Clean residual mean=0.000015 rms=0.001042 Jy/beam ! Combined flux in latest and established models = 0.125861 Jy selfcal ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 65 components and 0.125861 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.139990Jy sigma=0.000665 ! Fit after self-cal, rms=0.139824Jy sigma=0.000665 wmodel J1607-3331_S_2017_02_24_pus_map.mod ! Writing 65 model components to file: J1607-3331_S_2017_02_24_pus_map.mod wobs J1607-3331_S_2017_02_24_pus_uvs.fits ! Writing UV FITS file: J1607-3331_S_2017_02_24_pus_uvs.fits wwins J1607-3331_S_2017_02_24_pus_map.win ! wwins: Wrote 2 windows to J1607-3331_S_2017_02_24_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.000710922 Jy ! Component: 100 - total flux cleaned = -0.000714565 Jy ! Component: 150 - total flux cleaned = -0.000852538 Jy ! Component: 200 - total flux cleaned = -0.00105147 Jy ! Component: 250 - total flux cleaned = -0.00130721 Jy ! Component: 300 - total flux cleaned = -0.00167994 Jy ! Component: 350 - total flux cleaned = -0.00167945 Jy ! Component: 400 - total flux cleaned = -0.00167997 Jy ! Component: 450 - total flux cleaned = -0.00179622 Jy ! Component: 500 - total flux cleaned = -0.00196588 Jy ! Component: 550 - total flux cleaned = -0.00207693 Jy ! Component: 600 - total flux cleaned = -0.00213204 Jy ! Component: 650 - total flux cleaned = -0.00218617 Jy ! Component: 700 - total flux cleaned = -0.00224017 Jy ! Component: 750 - total flux cleaned = -0.00239603 Jy ! Component: 800 - total flux cleaned = -0.00265229 Jy ! Component: 850 - total flux cleaned = -0.0027534 Jy ! Component: 900 - total flux cleaned = -0.0028533 Jy ! Component: 950 - total flux cleaned = -0.00300121 Jy ! Component: 1000 - total flux cleaned = -0.00329215 Jy ! Component: 1050 - total flux cleaned = -0.00333896 Jy ! Component: 1100 - total flux cleaned = -0.00343413 Jy ! Component: 1150 - total flux cleaned = -0.00338676 Jy ! Component: 1200 - total flux cleaned = -0.00366484 Jy ! Component: 1250 - total flux cleaned = -0.00357229 Jy ! Component: 1300 - total flux cleaned = -0.00361725 Jy ! Component: 1350 - total flux cleaned = -0.00366337 Jy ! Component: 1400 - total flux cleaned = -0.00379694 Jy ! Component: 1450 - total flux cleaned = -0.00375249 Jy ! Component: 1500 - total flux cleaned = -0.00379631 Jy ! Component: 1550 - total flux cleaned = -0.00388336 Jy ! Component: 1600 - total flux cleaned = -0.00401206 Jy ! Component: 1650 - total flux cleaned = -0.00392646 Jy ! Component: 1700 - total flux cleaned = -0.00409546 Jy ! Component: 1750 - total flux cleaned = -0.00405273 Jy ! Component: 1800 - total flux cleaned = -0.00401082 Jy ! Component: 1850 - total flux cleaned = -0.00396965 Jy ! Component: 1900 - total flux cleaned = -0.00392846 Jy ! Component: 1950 - total flux cleaned = -0.00384732 Jy ! Component: 2000 - total flux cleaned = -0.00376728 Jy ! Component: 2050 - total flux cleaned = -0.00392679 Jy ! Component: 2100 - total flux cleaned = -0.00376819 Jy ! Component: 2150 - total flux cleaned = -0.00380756 Jy ! Component: 2200 - total flux cleaned = -0.00372965 Jy ! Component: 2250 - total flux cleaned = -0.00372936 Jy ! Component: 2300 - total flux cleaned = -0.00365179 Jy ! Component: 2350 - total flux cleaned = -0.00353698 Jy ! Component: 2400 - total flux cleaned = -0.00353726 Jy ! Component: 2450 - total flux cleaned = -0.00357429 Jy ! Component: 2500 - total flux cleaned = -0.00331232 Jy ! Component: 2550 - total flux cleaned = -0.00331228 Jy ! Component: 2600 - total flux cleaned = -0.00327512 Jy ! Component: 2650 - total flux cleaned = -0.00312777 Jy ! Component: 2700 - total flux cleaned = -0.00309106 Jy ! Component: 2750 - total flux cleaned = -0.00287314 Jy ! Component: 2800 - total flux cleaned = -0.00280105 Jy ! Component: 2850 - total flux cleaned = -0.0026576 Jy ! Component: 2900 - total flux cleaned = -0.00255065 Jy ! Component: 2950 - total flux cleaned = -0.00251501 Jy ! Component: 3000 - total flux cleaned = -0.00240884 Jy ! Component: 3050 - total flux cleaned = -0.0021636 Jy ! Component: 3100 - total flux cleaned = -0.00209419 Jy ! Component: 3150 - total flux cleaned = -0.00209427 Jy ! Component: 3200 - total flux cleaned = -0.00185271 Jy ! Component: 3250 - total flux cleaned = -0.00178401 Jy ! Component: 3300 - total flux cleaned = -0.00168165 Jy ! Component: 3350 - total flux cleaned = -0.00157975 Jy ! Component: 3400 - total flux cleaned = -0.00151214 Jy ! Component: 3450 - total flux cleaned = -0.0015457 Jy ! Component: 3500 - total flux cleaned = -0.00144518 Jy ! Component: 3550 - total flux cleaned = -0.0012124 Jy ! Component: 3600 - total flux cleaned = -0.0011459 Jy ! Component: 3650 - total flux cleaned = -0.000981355 Jy ! Component: 3700 - total flux cleaned = -0.000981434 Jy ! Component: 3750 - total flux cleaned = -0.000915917 Jy ! Component: 3800 - total flux cleaned = -0.000720834 Jy ! Component: 3850 - total flux cleaned = -0.000688693 Jy ! Component: 3900 - total flux cleaned = -0.00072061 Jy ! Component: 3950 - total flux cleaned = -0.000528317 Jy ! Component: 4000 - total flux cleaned = -0.000496557 Jy ! Component: 4050 - total flux cleaned = -0.000464714 Jy ! Total flux subtracted in 4096 components = -0.000464697 Jy ! Clean residual min=-0.002242 max=0.001947 Jy/beam ! Clean residual mean=0.000015 rms=0.000574 Jy/beam ! Combined flux in latest and established models = 0.125396 Jy keep ! Adding 255 model components to the UV plane model. ! The established model now contains 320 components and 0.125396 Jy ![Exited script file: muppet] wmap "J1607-3331_S_2017_02_24_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.215 x 8.388 at -2.27 degrees (North through East) ! Clean map min=-0.0037445 max=0.098158 Jy/beam ! Writing clean map to FITS file: J1607-3331_S_2017_02_24_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.0981581 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.00056926 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -1.73983 1.73983 3.47965 6.95931 13.9186 27.8372 55.6745 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0017 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.098 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.215 x 8.388 at -2.27 degrees (North through East) ! Clean map min=-0.0037445 max=0.098158 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J1607-3331_S_2017_02_24_pus_uvs.log closed on Sat May 4 11:30:18 2019