! Started logfile: J1607-3331_S_2017_01_21_pus_uvs.log on Sun May 5 15:58:30 2019 obs J1607-3331_S_2017_01_21_pus_uva.fits ! Reading UV FITS file: J1607-3331_S_2017_01_21_pus_uva.fits ! AN table 1: 31 integrations on 36 of 36 possible baselines. ! Apparent sampling: 0.620968 visibilities/baseline/integration-bin. ! Found source: J1607-3331 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 558 lines of history. ! ! Reading 2772 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J1607-3331_S_2017_01_21_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 63 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 58 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 63 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 135 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.979634Jy sigma=0.004774 ! Fit after self-cal, rms=0.881081Jy sigma=0.004334 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.178 mas, bmaj=6.297 mas, bpa=-7.798 degrees ! Estimated noise=3822.68 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.100581 Jy ! Component: 100 - total flux cleaned = 0.124339 Jy ! Total flux subtracted in 100 components = 0.124339 Jy ! Clean residual min=-0.012665 max=0.012982 Jy/beam ! Clean residual mean=-0.000070 rms=0.002918 Jy/beam ! Combined flux in latest and established models = 0.124339 Jy ! Performing phase self-cal ! Adding 8 model components to the UV plane model. ! The established model now contains 8 components and 0.124339 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.163210Jy sigma=0.000675 ! Fit after self-cal, rms=0.163223Jy sigma=0.000674 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.6 mas, bmaj=6.947 mas, bpa=-5.513 degrees ! Estimated noise=3079.57 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0168089 Jy ! Component: 100 - total flux cleaned = 0.024932 Jy ! Component: 150 - total flux cleaned = 0.0294274 Jy ! Component: 200 - total flux cleaned = 0.0301664 Jy ! Total flux subtracted in 200 components = 0.0301664 Jy ! Clean residual min=-0.010960 max=0.012456 Jy/beam ! Clean residual mean=-0.000187 rms=0.002887 Jy/beam ! Combined flux in latest and established models = 0.154506 Jy ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 21 components and 0.154506 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.162165Jy sigma=0.000662 ! Fit after self-cal, rms=0.162223Jy sigma=0.000661 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.91 FD 1.00* HN 1.55 LA 0.97 ! MK 1.00 NL 0.99 OV 1.47 PT 0.94 ! SC 0.94 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 0.94 FD 1.00* HN 1.20 LA 0.87 ! MK 1.02 NL 1.02 OV 1.46 PT 0.96 ! SC 1.03 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 0.98 FD 1.00* HN 1.27 LA 0.92 ! MK 1.01 NL 1.00 OV 1.76 PT 0.91 ! SC 1.00 ! ! ! Correcting IF 4. ! A total of 9 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.94 FD 1.00* HN 1.15 LA 0.92 ! MK 1.01 NL 1.00* OV 1.42 PT 0.90 ! SC 1.00* ! ! ! Fit before self-cal, rms=0.162223Jy sigma=0.000661 ! Fit after self-cal, rms=0.211221Jy sigma=0.000653 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.612 mas, bmaj=6.882 mas, bpa=-5.185 degrees ! Estimated noise=3104.86 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000561387 Jy ! Component: 100 - total flux cleaned = 0.000303288 Jy ! Component: 150 - total flux cleaned = 0.000305499 Jy ! Component: 200 - total flux cleaned = 0.000305229 Jy ! Total flux subtracted in 200 components = 0.000305229 Jy ! Clean residual min=-0.008356 max=0.008060 Jy/beam ! Clean residual mean=-0.000019 rms=0.002008 Jy/beam ! Combined flux in latest and established models = 0.154811 Jy ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 29 components and 0.154811 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.211128Jy sigma=0.000653 ! Fit after self-cal, rms=0.212792Jy sigma=0.000652 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.212792Jy sigma=0.000652 ! Fit after self-cal, rms=0.220815Jy sigma=0.000652 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.612 mas, bmaj=6.875 mas, bpa=-5.139 degrees ! Estimated noise=3119.43 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000950721 Jy ! Component: 100 - total flux cleaned = 0.00074171 Jy ! Component: 150 - total flux cleaned = 0.000856671 Jy ! Component: 200 - total flux cleaned = 0.000907322 Jy ! Total flux subtracted in 200 components = 0.000907322 Jy ! Clean residual min=-0.008561 max=0.007903 Jy/beam ! Clean residual mean=-0.000011 rms=0.001991 Jy/beam ! Combined flux in latest and established models = 0.155718 Jy selfcal ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 33 components and 0.155718 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.220730Jy sigma=0.000652 ! Fit after self-cal, rms=0.221065Jy sigma=0.000652 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000219524 Jy ! Component: 100 - total flux cleaned = 9.58758e-05 Jy ! Component: 150 - total flux cleaned = 0.000144706 Jy ! Component: 200 - total flux cleaned = 0.000186188 Jy ! Total flux subtracted in 200 components = 0.000186188 Jy ! Clean residual min=-0.008678 max=0.007719 Jy/beam ! Clean residual mean=-0.000011 rms=0.001986 Jy/beam ! Combined flux in latest and established models = 0.155904 Jy ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 37 components and 0.155904 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.221009Jy sigma=0.000652 ! Fit after self-cal, rms=0.221019Jy sigma=0.000652 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.221019Jy sigma=0.000652 ! Fit after self-cal, rms=0.240106Jy sigma=0.000643 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.611 mas, bmaj=6.904 mas, bpa=-5.227 degrees ! Estimated noise=3153.33 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00147877 Jy ! Component: 100 - total flux cleaned = 0.00141479 Jy ! Component: 150 - total flux cleaned = 0.00146227 Jy ! Component: 200 - total flux cleaned = 0.00154777 Jy ! Total flux subtracted in 200 components = 0.00154777 Jy ! Clean residual min=-0.008283 max=0.007562 Jy/beam ! Clean residual mean=0.000009 rms=0.001830 Jy/beam ! Combined flux in latest and established models = 0.157452 Jy selfcal ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 43 components and 0.157452 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.240038Jy sigma=0.000643 ! Fit after self-cal, rms=0.240297Jy sigma=0.000643 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -3.62794e-05 Jy ! Component: 100 - total flux cleaned = 9.47197e-06 Jy ! Component: 150 - total flux cleaned = 0.000132558 Jy ! Component: 200 - total flux cleaned = 0.000166864 Jy ! Total flux subtracted in 200 components = 0.000166864 Jy ! Clean residual min=-0.008133 max=0.007538 Jy/beam ! Clean residual mean=0.000007 rms=0.001841 Jy/beam ! Combined flux in latest and established models = 0.157619 Jy ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 49 components and 0.157619 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.240243Jy sigma=0.000643 ! Fit after self-cal, rms=0.240275Jy sigma=0.000643 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.240275Jy sigma=0.000643 ! Fit after self-cal, rms=0.242529Jy sigma=0.000642 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.129 mas, bmaj=19.27 mas, bpa=3.462 degrees ! Estimated noise=4518.32 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00143746 Jy ! Component: 100 - total flux cleaned = 0.00143097 Jy ! Component: 150 - total flux cleaned = 0.00142864 Jy ! Component: 200 - total flux cleaned = 0.00149827 Jy ! Total flux subtracted in 200 components = 0.00149827 Jy ! Clean residual min=-0.007911 max=0.009113 Jy/beam ! Clean residual mean=0.000022 rms=0.002604 Jy/beam ! Combined flux in latest and established models = 0.159117 Jy selfcal ! Performing phase self-cal ! Adding 7 model components to the UV plane model. ! The established model now contains 53 components and 0.159117 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.242489Jy sigma=0.000642 ! Fit after self-cal, rms=0.242569Jy sigma=0.000642 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -6.28559e-05 Jy ! Component: 100 - total flux cleaned = -6.26326e-05 Jy ! Component: 150 - total flux cleaned = -2.86661e-05 Jy ! Component: 200 - total flux cleaned = -2.76819e-05 Jy ! Total flux subtracted in 200 components = -2.76819e-05 Jy ! Clean residual min=-0.007896 max=0.009090 Jy/beam ! Clean residual mean=0.000019 rms=0.002613 Jy/beam ! Combined flux in latest and established models = 0.15909 Jy ! Performing phase self-cal ! Adding 8 model components to the UV plane model. ! The established model now contains 54 components and 0.15909 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.242534Jy sigma=0.000642 ! Fit after self-cal, rms=0.242587Jy sigma=0.000642 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=2.606 mas, bmaj=6.907 mas, bpa=-5.381 degrees ! Estimated noise=3156.24 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.606 x 6.907 at -5.381 degrees (North through East) ! Clean map min=-0.00783 max=0.13126 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.18 mas, bmaj=6.217 mas, bpa=-7.653 degrees ! Estimated noise=4029.63 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.104461 Jy ! Component: 100 - total flux cleaned = 0.13073 Jy ! Component: 150 - total flux cleaned = 0.142682 Jy ! Component: 200 - total flux cleaned = 0.150183 Jy ! Total flux subtracted in 200 components = 0.150183 Jy ! Clean residual min=-0.010344 max=0.009411 Jy/beam ! Clean residual mean=0.000009 rms=0.002361 Jy/beam ! Combined flux in latest and established models = 0.150183 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 18 model components to the UV plane model. ! The established model now contains 18 components and 0.150183 Jy ! Inverting map and beam ! Estimated beam: bmin=2.606 mas, bmaj=6.907 mas, bpa=-5.381 degrees ! Estimated noise=3156.24 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00441537 Jy ! Component: 100 - total flux cleaned = 0.00555837 Jy ! Component: 150 - total flux cleaned = 0.00595962 Jy ! Component: 200 - total flux cleaned = 0.00619269 Jy ! Total flux subtracted in 200 components = 0.00619269 Jy ! Clean residual min=-0.008939 max=0.007391 Jy/beam ! Clean residual mean=-0.000009 rms=0.001891 Jy/beam ! Combined flux in latest and established models = 0.156376 Jy ! Adding 13 model components to the UV plane model. ! The established model now contains 22 components and 0.156376 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.129 mas, bmaj=19.27 mas, bpa=3.462 degrees ! Estimated noise=4518.32 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00159165 Jy ! Component: 100 - total flux cleaned = 0.00177742 Jy ! Component: 150 - total flux cleaned = 0.00185971 Jy ! Component: 200 - total flux cleaned = 0.00200167 Jy ! Total flux subtracted in 200 components = 0.00200167 Jy ! Clean residual min=-0.007918 max=0.009015 Jy/beam ! Clean residual mean=0.000007 rms=0.002644 Jy/beam ! Combined flux in latest and established models = 0.158377 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 6.12936e-05 Jy ! Component: 100 - total flux cleaned = 0.000168866 Jy ! Component: 150 - total flux cleaned = 0.000216429 Jy ! Component: 200 - total flux cleaned = 0.000299161 Jy ! Total flux subtracted in 200 components = 0.000299161 Jy ! Clean residual min=-0.007872 max=0.009105 Jy/beam ! Clean residual mean=0.000012 rms=0.002617 Jy/beam ! Combined flux in latest and established models = 0.158677 Jy ! Adding 10 model components to the UV plane model. ! The established model now contains 28 components and 0.158677 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=2.606 mas, bmaj=6.907 mas, bpa=-5.381 degrees ! Estimated noise=3156.24 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -3.28799e-05 Jy ! Component: 100 - total flux cleaned = -0.000303605 Jy ! Component: 150 - total flux cleaned = -0.000303854 Jy ! Component: 200 - total flux cleaned = -0.000179601 Jy ! Total flux subtracted in 200 components = -0.000179601 Jy ! Clean residual min=-0.008242 max=0.007775 Jy/beam ! Clean residual mean=0.000005 rms=0.001840 Jy/beam ! Combined flux in latest and established models = 0.158497 Jy selfcal ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 35 components and 0.158497 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.242584Jy sigma=0.000643 ! Fit after self-cal, rms=0.242532Jy sigma=0.000642 wmodel J1607-3331_S_2017_01_21_pus_map.mod ! Writing 35 model components to file: J1607-3331_S_2017_01_21_pus_map.mod wobs J1607-3331_S_2017_01_21_pus_uvs.fits ! Writing UV FITS file: J1607-3331_S_2017_01_21_pus_uvs.fits wwins J1607-3331_S_2017_01_21_pus_map.win ! wwins: Wrote 1 windows to J1607-3331_S_2017_01_21_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.00054092 Jy ! Component: 100 - total flux cleaned = -0.000671538 Jy ! Component: 150 - total flux cleaned = -0.000197049 Jy ! Component: 200 - total flux cleaned = 0.00014358 Jy ! Component: 250 - total flux cleaned = 0.000475165 Jy ! Component: 300 - total flux cleaned = 0.000476299 Jy ! Component: 350 - total flux cleaned = 0.000784214 Jy ! Component: 400 - total flux cleaned = 0.00118534 Jy ! Component: 450 - total flux cleaned = 0.00137816 Jy ! Component: 500 - total flux cleaned = 0.00175945 Jy ! Component: 550 - total flux cleaned = 0.00175835 Jy ! Component: 600 - total flux cleaned = 0.00194276 Jy ! Component: 650 - total flux cleaned = 0.00221311 Jy ! Component: 700 - total flux cleaned = 0.00212408 Jy ! Component: 750 - total flux cleaned = 0.00203691 Jy ! Component: 800 - total flux cleaned = 0.00212379 Jy ! Component: 850 - total flux cleaned = 0.00186738 Jy ! Component: 900 - total flux cleaned = 0.0014443 Jy ! Component: 950 - total flux cleaned = 0.00144435 Jy ! Component: 1000 - total flux cleaned = 0.00119519 Jy ! Component: 1050 - total flux cleaned = 0.00086678 Jy ! Component: 1100 - total flux cleaned = 0.000542212 Jy ! Component: 1150 - total flux cleaned = 0.000621645 Jy ! Component: 1200 - total flux cleaned = 0.000141107 Jy ! Component: 1250 - total flux cleaned = -0.000333277 Jy ! Component: 1300 - total flux cleaned = -0.000333649 Jy ! Component: 1350 - total flux cleaned = -0.000489308 Jy ! Component: 1400 - total flux cleaned = -0.00102835 Jy ! Component: 1450 - total flux cleaned = -0.0011801 Jy ! Component: 1500 - total flux cleaned = -0.00155887 Jy ! Component: 1550 - total flux cleaned = -0.00163371 Jy ! Component: 1600 - total flux cleaned = -0.00193107 Jy ! Component: 1650 - total flux cleaned = -0.00200401 Jy ! Component: 1700 - total flux cleaned = -0.00207729 Jy ! Component: 1750 - total flux cleaned = -0.00229473 Jy ! Component: 1800 - total flux cleaned = -0.00229419 Jy ! Component: 1850 - total flux cleaned = -0.00236552 Jy ! Component: 1900 - total flux cleaned = -0.00222353 Jy ! Component: 1950 - total flux cleaned = -0.0023639 Jy ! Component: 2000 - total flux cleaned = -0.00264434 Jy ! Component: 2050 - total flux cleaned = -0.00243604 Jy ! Component: 2100 - total flux cleaned = -0.00243605 Jy ! Component: 2150 - total flux cleaned = -0.00243585 Jy ! Component: 2200 - total flux cleaned = -0.00230057 Jy ! Component: 2250 - total flux cleaned = -0.00230009 Jy ! Component: 2300 - total flux cleaned = -0.00229982 Jy ! Component: 2350 - total flux cleaned = -0.00216646 Jy ! Component: 2400 - total flux cleaned = -0.00203497 Jy ! Component: 2450 - total flux cleaned = -0.00242847 Jy ! Component: 2500 - total flux cleaned = -0.0023627 Jy ! Component: 2550 - total flux cleaned = -0.00236219 Jy ! Component: 2600 - total flux cleaned = -0.00216899 Jy ! Component: 2650 - total flux cleaned = -0.00229582 Jy ! Component: 2700 - total flux cleaned = -0.00235805 Jy ! Component: 2750 - total flux cleaned = -0.00197986 Jy ! Component: 2800 - total flux cleaned = -0.00216712 Jy ! Component: 2850 - total flux cleaned = -0.00198052 Jy ! Component: 2900 - total flux cleaned = -0.00179546 Jy ! Component: 2950 - total flux cleaned = -0.00179632 Jy ! Component: 3000 - total flux cleaned = -0.00149055 Jy ! Component: 3050 - total flux cleaned = -0.00142945 Jy ! Component: 3100 - total flux cleaned = -0.00106711 Jy ! Component: 3150 - total flux cleaned = -0.00106731 Jy ! Component: 3200 - total flux cleaned = -0.0010075 Jy ! Component: 3250 - total flux cleaned = -0.000710313 Jy ! Component: 3300 - total flux cleaned = -0.000356435 Jy ! Component: 3350 - total flux cleaned = -0.000239128 Jy ! Component: 3400 - total flux cleaned = 5.25333e-05 Jy ! Component: 3450 - total flux cleaned = 0.000226794 Jy ! Component: 3500 - total flux cleaned = 0.000284708 Jy ! Component: 3550 - total flux cleaned = 0.000686883 Jy ! Component: 3600 - total flux cleaned = 0.000515276 Jy ! Component: 3650 - total flux cleaned = 0.000799887 Jy ! Component: 3700 - total flux cleaned = 0.000686276 Jy ! Component: 3750 - total flux cleaned = 0.000911621 Jy ! Component: 3800 - total flux cleaned = 0.00107981 Jy ! Component: 3850 - total flux cleaned = 0.00124656 Jy ! Component: 3900 - total flux cleaned = 0.00135717 Jy ! Component: 3950 - total flux cleaned = 0.0014678 Jy ! Component: 4000 - total flux cleaned = 0.00174167 Jy ! Component: 4050 - total flux cleaned = 0.00179606 Jy ! Total flux subtracted in 4096 components = 0.00201314 Jy ! Clean residual min=-0.003306 max=0.003172 Jy/beam ! Clean residual mean=0.000026 rms=0.000985 Jy/beam ! Combined flux in latest and established models = 0.16051 Jy keep ! Adding 274 model components to the UV plane model. ! The established model now contains 309 components and 0.16051 Jy ![Exited script file: muppet] wmap "J1607-3331_S_2017_01_21_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.606 x 6.907 at -5.381 degrees (North through East) ! Clean map min=-0.0061713 max=0.12969 Jy/beam ! Writing clean map to FITS file: J1607-3331_S_2017_01_21_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.129687 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000973889 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -2.25286 2.25286 4.50572 9.01145 18.0229 36.0458 72.0916 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0029 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.129 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.606 x 6.907 at -5.381 degrees (North through East) ! Clean map min=-0.0061713 max=0.12969 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J1607-3331_S_2017_01_21_pus_uvs.log closed on Sun May 5 15:58:34 2019